CISCO-ATM-IF-PHYS-MIB
40 objects
A minimal set of managed objects for tracking the status of DS3/E3/DS1/E1 and SONET interfaces.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.45 | IdentityciscoAtmIfPhysMIB | A minimal set of managed objects for tracking the status of DS3/E3/DS1/E1 and SONET interfaces. | ||
| 1.3.6.1.4.1.9.9.45.1 | NodeciscoAtmIfPhysMIBObjects | |||
| 1.3.6.1.4.1.9.9.45.1.1 | TableciscoAtmIfPhysTable | not-accessible | current | A table containing basic status and statistics for the physical layer of ATM interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1 | RowciscoAtmIfPhysEntry | not-accessible | current | Basic status and statistics for the physical layer of an ATM interface. |
| 1.3.6.1.4.1.9.9.45.1.1.1.1 | ColumnciscoAtmIfPhysStatus | read-only | current | The status of the physical interface. The value of this object is only valid when the interface's ifAdminStatus has the value 'up'. Note that some of the enume… |
| 1.3.6.1.4.1.9.9.45.1.1.1.2 | ColumnciscoAtmIfPhysSectionParityErrors | read-only | current | The number of B1 (BIP) errors on the physical interface. This object is only present for SONET interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.3 | ColumnciscoAtmIfPhysLineParityErrors | read-only | current | The number of B2 (BIP) errors on the physical interface. This object is only present for SONET interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.4 | ColumnciscoAtmIfPhysPathParityErrors | read-only | current | The number of B3 (BIP) errors on the physical interface. This object is only present for SONET interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.5 | ColumnciscoAtmIfPhysLcvErrors | read-only | current | The number of Line Code Violation errors on the physical interface. This object is only present for DS3/E3/DS1/E1 interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.6 | ColumnciscoAtmIfPhysCBitParityErrors | read-only | current | The number of C-bit parity violations on the physical interface. This object is only present for DS3 interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.7 | ColumnciscoAtmIfPhysPBitParityErrors | read-only | current | The number of P-bit parity violations or E3 G.832 BIP-8 errors on the physical interface. This object is present only for DS3/E3 interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.8 | ColumnciscoAtmIfPhysPlcpBipViolations | read-only | current | The number of PLCP BIP violations on the physical interface. This object is only present for DS3/E3/DS1/E1 interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.9 | ColumnciscoAtmIfPhysLineFebeErrors | read-only | current | The number of Z2 (Line FEBE) errors on the physical interface. This object is only present for SONET interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.10 | ColumnciscoAtmIfPhysPathFebeErrors | read-only | current | The number of G1 (Path FEBE) errors on the physical interface. This object is only present for SONET interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.11 | ColumnciscoAtmIfPhysCellPayloadScrambling | read-write | current | The status of whether cell payload scrambling is enabled or disabled on the physical interface. |
| 1.3.6.1.4.1.9.9.45.1.1.1.12 | ColumnciscoAtmIfPhysStsStreamScrambling | read-write | current | The status of whether STS-stream scrambling is enabled or disabled on the physical interface. |
| 1.3.6.1.4.1.9.9.45.1.1.1.13 | ColumnciscoAtmIfPhysFramingMode | read-write | current | The framing format present on the physical interface. 'sonet' indicates sts-3c or sts-12c format and applies only to OC-3 and OC-12 type interfaces, respective… |
| 1.3.6.1.4.1.9.9.45.1.1.1.14 | ColumnciscoAtmIfPhysLoopbackConfig | read-write | current | The loopback configured on the physical interface: 'noLoop' indicates no loopback is present. 'diagnosticLoop' indicates transmit data stream is looped to the … |
| 1.3.6.1.4.1.9.9.45.1.1.1.15 | ColumnciscoAtmIfPhysLineBuildOut | read-write | current | The line buildout configured on the transmit signal: 'e3AllCables' applies to all cables of E3 physical interfaces. 'ds3CablesUnder225' applies to cables under… |
| 1.3.6.1.4.1.9.9.45.1.1.1.16 | ColumnciscoAtmIfPhysTransmitClockSource | read-write | current | The source of the tranmit clock: 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'freeRunning' indicates that a local cl… |
| 1.3.6.1.4.1.9.9.45.1.1.1.17 | ColumnciscoAtmIfPhysClockSourcePriority | read-write | current | The priority of this interface if configured as a network clock source. 'notConfigured' indicates this is not configured as a network clock source. |
| 1.3.6.1.4.1.9.9.45.1.1.1.18 | ColumnciscoAtmIfPhysClockSourceStatus | read-only | current | The network clock source status of this interface: 'notSelected' indicates this is not selected as the network clock source. 'selected' indicates this is selec… |
| 1.3.6.1.4.1.9.9.45.1.1.1.19 | ColumnciscoAtmIfPhysDS1BitErrors | read-only | current | The number of bit errors (CRC-6 error in ESF mode and framing bit error in SF mode) on the physical interface. This object is only present for DS1 interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.20 | ColumnciscoAtmIfPhysE1CrcErrors | read-only | current | The number of CRC errors (in CRC-4 mode) on the physical interface. This object is only present for E1 interfaces. |
| 1.3.6.1.4.1.9.9.45.1.1.1.21 | ColumnciscoAtmIfPhysLineCode | read-write | current | The line coding present on the physical interface This object is only present for DS1/E1 interfaces. 'ami' indicates alternate mark inversion (AMI) line code o… |
| 1.3.6.1.4.1.9.9.45.3 | NodeciscoAtmIfPhysMIBConformance | |||
| 1.3.6.1.4.1.9.9.45.3.1 | NodeciscoAtmIfPhysMIBCompliances | |||
| 1.3.6.1.4.1.9.9.45.3.1.1 | ComplianceciscoAtmIfPhysMIBCompliance | obsolete | The compliance statement for entities which implement the Cisco ATM Interface Physical MIB. | |
| 1.3.6.1.4.1.9.9.45.3.1.2 | ComplianceciscoAtmIfPhysMIBCompliance2 | obsolete | The compliance statement for entities which implement the Cisco ATM Interface Physical MIB. | |
| 1.3.6.1.4.1.9.9.45.3.1.3 | ComplianceciscoAtmIfPhysMIBCompliance3 | current | The compliance statement for entities which implement the Cisco ATM Interface Physical MIB. | |
| 1.3.6.1.4.1.9.9.45.3.2 | NodeciscoAtmIfPhysMIBGroups | |||
| 1.3.6.1.4.1.9.9.45.3.2.1 | GroupciscoAtmIfPhysMIBCommonGroup | current | A collection of objects common to all ATM physical layer interfaces. | |
| 1.3.6.1.4.1.9.9.45.3.2.2 | GroupciscoAtmIfPhysMIBSonetGroup | current | A collection of objects for ATM SONET interfaces. | |
| 1.3.6.1.4.1.9.9.45.3.2.3 | GroupciscoAtmIfPhysMIBDs3E3Group | current | A collection of objects for ATM DS3/E3 interfaces. | |
| 1.3.6.1.4.1.9.9.45.3.2.4 | GroupciscoAtmIfPhysMIBCommonGroup2 | current | Additional collection of objects common to all ATM physical layer interfaces. | |
| 1.3.6.1.4.1.9.9.45.3.2.5 | GroupciscoAtmIfPhysMIBSonetGroup2 | current | Additional collection of objects for ATM SONET interfaces. | |
| 1.3.6.1.4.1.9.9.45.3.2.6 | GroupciscoAtmIfPhysMIBDs3Group | current | Collection of objects for ATM DS3 interfaces. | |
| 1.3.6.1.4.1.9.9.45.3.2.7 | GroupciscoAtmIfPhysMIBDs1E1Group | current | A collection of objects for ATM DS1/E1 interfaces. | |
| 1.3.6.1.4.1.9.9.45.3.2.8 | GroupciscoAtmIfPhysMIBDs1Group | current | A collection of objects for ATM DS1 interfaces. | |
| 1.3.6.1.4.1.9.9.45.3.2.9 | GroupciscoAtmIfPhysMIBE1Group | current | A collection of objects for ATM E1 interfaces. |