CISCO-ATM-PVC-MIB
20 objects
PVC's (Permanent Virtual Channel) can carry bridged PDUs (BPDUs) using the encapsulation method detailed in RFC1483. This is an alternative to using LAN Emulation to transfer BPDUs. This MIB allows users to configure a PVC on an ATM uplink card of a Catalyst 5000 device, and then bind that PVC to a Virtual LAN (VLAN).
Imported Objects
| CISCO-SMI | ciscoMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.94 | IdentityciscoAtmPvcMIB | PVC's (Permanent Virtual Channel) can carry bridged PDUs (BPDUs) using the encapsulation method detailed in RFC1483. This is an alternative to using LAN Emulat… | ||
| 1.3.6.1.4.1.9.9.94.1 | NodeciscoAtmPvcMIBObjects | |||
| 1.3.6.1.4.1.9.9.94.1.1 | NodeciscoAtmPvcCreateBindGroup | |||
| 1.3.6.1.4.1.9.9.94.1.1.1 | TablecapvcTable | not-accessible | current | A table of all the PVCs configured on an ATM uplink card. |
| 1.3.6.1.4.1.9.9.94.1.1.1.1 | RowcapvcEntry | not-accessible | current | An entry in the PVC table containing information about a single PVC that has been configured. To create a PVC at an ATM interface and bind it to a VLAN, either… |
| 1.3.6.1.4.1.9.9.94.1.1.1.1.1 | ColumncapvcPort | not-accessible | current | The port number in the ATM module on which this PVC is being configured. |
| 1.3.6.1.4.1.9.9.94.1.1.1.1.2 | ColumncapvcVPI | not-accessible | current | The Virtual Path Identifier for the PVC. |
| 1.3.6.1.4.1.9.9.94.1.1.1.1.3 | ColumncapvcVCI | not-accessible | current | The Virtual Channel Identifier for the PVC. |
| 1.3.6.1.4.1.9.9.94.1.1.1.1.4 | ColumncapvcVCD | read-only | current | This is the Virtual Channel Descriptor, a value which uniquely identifies the PVC. This is a read-only variable and is not set by the user. When the PVC is cre… |
| 1.3.6.1.4.1.9.9.94.1.1.1.1.5 | ColumncapvcType | read-create | current | The type of traffic that will flow through the PVC. The user can configure the PVC as: (1) aal5snap PVC which carries network interconnect traffic over ATM AAL… |
| 1.3.6.1.4.1.9.9.94.1.1.1.1.6 | ColumncapvcPCR | read-create | current | The Peak Cell Rate for the PVC. This value denotes the bandwidth allocated for this PVC. The default value for this field is the maximum speed of the interface… |
| 1.3.6.1.4.1.9.9.94.1.1.1.1.7 | ColumncapvcOAM | read-create | current | A boolean that indicates if a F5 OAM loopback cell will be sent on this PVC or not. The default value for this field is false. |
| 1.3.6.1.4.1.9.9.94.1.1.1.1.8 | ColumncapvcFrequency | read-create | current | Indicates how often will a F5 OAM loopback cell be transmitted. If the value of capvcOAM is true, then the default value for this variable is 10 seconds. If th… |
| 1.3.6.1.4.1.9.9.94.1.1.1.1.9 | ColumncapvcVlanId | read-create | current | The VLAN number of the VLAN that the PVC is bound to. Binding a PVC say with VCD number x, to a VLAN with a VlanId y, causes the traffic on VLAN y to pass thro… |
| 1.3.6.1.4.1.9.9.94.1.1.1.1.10 | ColumncapvcRowStatus | read-create | current | This object is used to create, delete or modify a row in this table. To create a new PVC, this object is initially set to 'createAndWait' or 'createAndGo'. Thi… |
| 1.3.6.1.4.1.9.9.94.3 | NodeciscoAtmPvcMIBConformance | |||
| 1.3.6.1.4.1.9.9.94.3.1 | NodeciscoAtmPvcMIBCompliances | |||
| 1.3.6.1.4.1.9.9.94.3.1.1 | ComplianceciscoAtmPvcMIBCompliance | current | The compliance statement for entities which implement the Cisco Atm PVC MIB. This MIB is mandatory for all ATM uplink cards on the Catalyst 5000 device. | |
| 1.3.6.1.4.1.9.9.94.3.2 | NodeciscoAtmPvcMIBGroups | |||
| 1.3.6.1.4.1.9.9.94.3.2.1 | GroupciscoAtmPvcMIBGroup | current | A collection of objects providing ATM PVC configuration and VLAN binding. |