CISCO-ATM-RM-MIB
215 objects
The MIB module which complements standard ATM MIBs for Cisco devices, for Resource Management.
Imported Objects
| CISCO-SMI | ciscoExperiment |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.10 | IdentityciscoAtmRmMIB | The MIB module which complements standard ATM MIBs for Cisco devices, for Resource Management. | ||
| 1.3.6.1.4.1.9.10.10.1 | NodeciscoAtmRmMIBObjects | |||
| 1.3.6.1.4.1.9.10.10.1.1 | NodeciscoAtmRmSwitchCfg | |||
| 1.3.6.1.4.1.9.10.10.1.1.1 | ScalarrmSwitchOverSubFactor | read-write | current | The Over Subscription Factor (OSF) is used on switch startup/OIR to determine the maximum sizes of VBR-NRT and ABR/UBR queues. In general, the larger the value… |
| 1.3.6.1.4.1.9.10.10.1.1.2 | ScalarrmSwitchScrMarginFactor | read-write | current | The Sustained Cell Rate Margin Factor (SCRMF) is used in Connection Admission Control (CAC) of VBR connections to vary the weight given to the difference betwe… |
| 1.3.6.1.4.1.9.10.10.1.1.3 | ScalarrmSwitchAbrCongNotify | read-write | current | The ABR Congestion Notification object determines the type of congestion notification used on ABR connections in the switch. This notification can be done eith… |
| 1.3.6.1.4.1.9.10.10.1.1.4 | TablermDefaultQosObjectiveTable | not-accessible | current | The (conceptual) table containing Resource Management configuration information for default Quality of Service objective values used when a signalling request … |
| 1.3.6.1.4.1.9.10.10.1.1.4.1 | RowrmDefaultQosObjectiveEntry | not-accessible | current | An entry (conceptual row) in the rmDefaultQosObjectiveTable containing Resource Management configuration for the default UNI QOS objectives. Rows are identifie… |
| 1.3.6.1.4.1.9.10.10.1.1.4.1.1 | ColumnrmDefaultQosServiceCategory | not-accessible | current | The Service Category to which the row applies. |
| 1.3.6.1.4.1.9.10.10.1.1.4.1.2 | ColumnrmScDefaultQosMaxCtd | read-write | current | The default Maximum Cell Transfer Delay (ctd) for the Service Category. It applies only to cbr and vbr-rt Service Categories. Specifying a value of 16777215 si… |
| 1.3.6.1.4.1.9.10.10.1.1.4.1.3 | ColumnrmScDefaultQosPeakToPeakCdv | read-write | current | The default Peak-to-peak cell delay variation (cdv) for the Service Category. It applies only to cbr and vbr-rt Service Categories. Specifying a value of 16777… |
| 1.3.6.1.4.1.9.10.10.1.1.4.1.4 | ColumnrmScDefaultQosClr | read-write | current | The default cell-loss-ratio for the Service Category (for CLP=0 cells only). Specifying a value of 0 signifies that this parameter should not be checked during… |
| 1.3.6.1.4.1.9.10.10.1.1.4.1.5 | ColumnrmScDefaultQosClrClp01 | read-write | current | The default cell-loss-ratio for the Service Category for CLP=0+1 cells. Specifying a value of 0 signifies that this parameter should not be checked during conn… |
| 1.3.6.1.4.1.9.10.10.1.2 | NodeciscoAtmRmSwitchSharedMem | |||
| 1.3.6.1.4.1.9.10.10.1.2.1 | TablesharedMemRmSwitchQueuedCellTable | not-accessible | current | The (conceptual) table containing Resource Management information on the cells in the output queues of a shared-memory output-queued ATM switch. |
| 1.3.6.1.4.1.9.10.10.1.2.1.1 | RowsharedMemRmSwitchQueuedCellEntry | not-accessible | current | An entry (conceptual row) in the sharedMemRmSwitchQueuedCellTable containing Resource Management information on the cells in the output queues of a shared-memo… |
| 1.3.6.1.4.1.9.10.10.1.2.1.1.1 | ColumnsharedMemRmCellPriority | not-accessible | current | The cell priority. The cell priority maps one-to-one to the per-interface queues specified by the sharedMemRmIfOutputQ object. All cells of a connection of a p… |
| 1.3.6.1.4.1.9.10.10.1.2.1.1.2 | ColumnsharedMemRmSwitchQueuedCellLimit | read-write | current | Configured limit on the number of cells on all output queues of the switch at any time of a particular priority. |
| 1.3.6.1.4.1.9.10.10.1.2.1.1.3 | ColumnsharedMemRmSwitchQueuedCellCount | read-only | current | Count of the number of cells on all output queues of the switch at any time of a particular priority. |
| 1.3.6.1.4.1.9.10.10.1.3 | NodeciscoAtmRmIfCfg | |||
| 1.3.6.1.4.1.9.10.10.1.3.3 | TablermIfCfgTable | not-accessible | current | The (conceptual) table containing Resource Management configuration information for whole ATM interfaces. |
| 1.3.6.1.4.1.9.10.10.1.3.3.1 | RowrmIfCfgEntry | not-accessible | current | An entry (conceptual row) in the rmIfCfgTable containing Resource Management configuration for an ATM interface. The particular interface is identified by the … |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.1 | ColumnrmIfOutPacingRateRequested | read-write | current | This object reflects an explicit configuration of the state of pacing for this interface. If the value of this object is 0, pacing is disabled on this interfac… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.2 | ColumnrmIfOutPacingRateInstalled | read-only | current | The output pacing value, in kilobits per second, in effect. A value of 0 indicates output pacing is disabled. This object is not instantiated for interfaces to… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.3 | ColumnrmIfOutPacingForce | read-write | current | A Set Request for rmIfOutPacingRateRequested that does not reduce the port rate below the currently allocated bandwidth guarantees for the output flow always s… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.4 | ColumnrmIfLinkDistance | read-write | current | The link distance defined for the interface, expressed in kilometers. This is then divided by the speed of light to determine a propagation delay. |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.5 | ColumnrmIfBestEffortLimit | read-write | current | The limit on the number of Best Effort connections that can be established on this interface. Note that a change to this value affects subsequent connection se… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.6 | ColumnrmIfCbrDefaultRxUpcTolerance | read-write | current | Specifies the GCRA limit parameter used for policing of a receive cell-stream of a CBR connection on an interface, if the limit parameter is not specified expl… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.7 | ColumnrmIfVbrRtDefaultRxUpcTolerance | read-write | current | Specifies the maximum burst size parameter used for policing of a receive cell-stream of a VBR-RT connection on an interface, if this parameter is not specifie… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.8 | ColumnrmIfVbrNrtDefaultRxUpcTolerance | read-write | current | Specifies the maximum burst size parameter used for policing of a receive cell-stream of a VBR-NRT connection on an interface, if this parameter is not specifi… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.9 | ColumnrmIfAbrDefaultRxUpcTolerance | read-write | current | Specifies the GCRA limit parameter used for policing of a receive cell-stream of an ABR connection on an interface, if the limit parameter is not specified exp… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.10 | ColumnrmIfUbrDefaultRxUpcTolerance | read-write | current | Specifies the GCRA limit parameter used for policing of a receive cell-stream of a UBR connection on an interface, if the limit parameter is not specified expl… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.11 | ColumnrmIfVbrRtDefaultRxUpcCdvt | read-write | current | Specifies the GCRA limit parameter used for peak-rate policing of a receive cell-stream of a VBR-RT connection on an interface, if the CDVT parameter is not sp… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.12 | ColumnrmIfVbrNrtDefaultRxUpcCdvt | read-write | current | Specifies the GCRA limit parameter used for peak-rate policing of a receive cell-stream of a VBR-NRT connection on an interface, if the CDVT parameter is not s… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.13 | ColumnrmIfServCategorySupport | read-write | current | The value of this object controls and reflects the Service Category(s) supported on this ATM interface. If a bit is set, the corresponding Service Category is … |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.14 | ColumnrmIfFramingOverhead | read-write | current | If this object is set to true, framing overhead will be taken into account in determining the Maximum Cell Rate that is possible on this interface. If this obj… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.15 | ColumnrmIfFramingOverheadForce | read-write | current | A Set Request for rmIfFramingOverhead that does not reduce the Maximum Guaranteed Services Bandwidth of this interface below the currently allocated bandwidth … |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.16 | ColumnrmIfOverBooking | read-write | current | This object specifies overbooking on this interface as a percentage of the Maximum Cell Rate that is possible on this interface. If the value of this object is… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.17 | ColumnrmIfVbrRtPerClassOverbooking | read-write | current | This object specifies the Per Class Overbooking percentage for VBR-rt service category on this interface. If the value of this object is 100, Per Class Overboo… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.18 | ColumnrmIfVbrNrtPerClassOverbooking | read-write | current | This object specifies the Per Class Overbooking percentage for VBR-Nrt service category on this interface. If the value of this object is 100, Per Class Overbo… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.19 | ColumnrmIfAbrPerClassOverbooking | read-write | current | This object specifies the Per Class Overbooking percentage for ABR service category on this interface. If the value of this object is 100, Per Class Overbookin… |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.20 | ColumnrmIfUbrPerClassOverbooking | read-write | current | This object specifies the Per Class Overbooking percentage for UBR service category on this interface. If the value of this object is 100, Per Class Overbookin… |
| 1.3.6.1.4.1.9.10.10.1.3.4 | TablermIfDirectionCfgTable | not-accessible | current | The (conceptual) table containing Resource Management configuration information for a single direction of traffic flow on ATM interfaces. |
| 1.3.6.1.4.1.9.10.10.1.3.4.1 | RowrmIfDirectionCfgEntry | not-accessible | current | An entry (conceptual row) in the rmIfInOutCfgTable containing Resource Management configuration for a traffic direction on an ATM interface. The particular int… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.1 | ColumnrmIfDirection | not-accessible | current | Selects the traffic direction for which subsequent row parameters are read or written. In is received from the port(into the device), Out is transmitted to the… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.2 | ColumnrmIfDirControlLinkShareMaxAgg | read-write | current | Configuration in the Controller Link Sharing (CLS) scheme. Specifies the maximum aggregate Guaranteed Service (CBR or VBR) traffic that can be allocated in a t… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.3 | ColumnrmIfDirControlLinkShareMinCbr | read-write | current | Configuration in the Controller Link Sharing (CLS) scheme. Specifies a minimum amount of CBR traffic that can be reserved in a traffic direction on an interfac… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.4 | ColumnrmIfDirControlLinkShareMaxCbr | read-write | current | Configuration in the Controller Link Sharing (CLS) scheme. Specifies the maximum CBR traffic that can be allocated in a traffic direction on an interface. It i… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.5 | ColumnrmIfDirControlLinkShareMinVbr | read-write | current | Configuration in the Controller Link Sharing (CLS) scheme. Specifies a minimum amount of VBR traffic that can be reserved in a traffic direction on an interfac… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.6 | ColumnrmIfDirControlLinkShareMaxVbr | read-write | current | Configuration in the Controller Link Sharing (CLS) scheme. Specifies the maximum VBR traffic that can be allocated in a traffic direction on an interface. It i… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.7 | ColumnrmIfDirMaxCbrPcr | read-write | current | Specifies the maximum Peak-cell-rate (pcr) traffic parameter that can be specified for CBR connections in a traffic direction on an interface. It is specified … |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.8 | ColumnrmIfDirMaxCbrTolerance | read-write | current | Specifies the maximum limit parameter used in the GCRA algorithm for traffic policing that can be specified for CBR connections in a traffic direction on an in… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.9 | ColumnrmIfDirMaxVbrPcr | read-write | current | Specifies the maximum Peak-cell-rate (pcr) traffic parameter that can be specified for VBR connections in a traffic direction on an interface. It is specified … |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.10 | ColumnrmIfDirMaxVbrScr | read-write | current | Specifies the maximum Sustained-cell-rate (scr) traffic parameter that can be specified for VBR connections in a traffic direction on an interface. It is speci… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.11 | ColumnrmIfDirMaxVbrTolerance | read-write | current | Specifies the maximum limit parameter used in the GCRA algorithm for traffic policing that can be specified for VBR connections in a traffic direction on an in… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.12 | ColumnrmIfDirMaxAbrPcr | read-write | current | Specifies the maximum Peak-cell-rate (pcr) traffic parameter that can be specified for ABR connections in a traffic direction on an interface. It is specified … |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.13 | ColumnrmIfDirMaxAbrTolerance | read-write | current | Specifies the maximum limit parameter used in the GCRA algorithm for traffic policing that can be specified for ABR connections in a traffic direction on an in… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.14 | ColumnrmIfDirMaxUbrPcr | read-write | current | Specifies the maximum Peak-cell-rate (pcr) traffic parameter that can be specified for UBR connections in a traffic direction on an interface. It is specified … |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.15 | ColumnrmIfDirMaxUbrTolerance | read-write | current | Specifies the maximum limit parameter used in the GCRA algorithm for traffic policing that can be specified for UBR connections in a traffic direction on an in… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.16 | ColumnrmIfDirMaxAbrMcr | read-write | current | Specifies the maximum Minimum-cell-rate (mcr) traffic parameter that can be specified for ABR connections in a traffic direction on an interface. It is specifi… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.17 | ColumnrmIfDirMaxUbrMcr | read-write | current | Specifies the maximum Minimum-cell-rate (mcr) traffic parameter that can be specified for UBR plus (UBR with an mcr guaranteed) connections in a traffic direct… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.18 | ColumnrmIfDirMaxVbrCdvt | read-write | current | Specifies the maximum peak-rate CDVT parameter used in the GCRA algorithm for traffic policing that can be specified for VBR connections in a traffic direction… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.19 | ColumnrmIfDirControlLinkShareMinAbr | read-write | current | Configuration in the Controller Link Sharing (CLS) scheme. Specifies a minimum amount of ABR traffic that can be reserved in a traffic direction on an interfac… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.20 | ColumnrmIfDirControlLinkShareMaxAbr | read-write | current | Configuration in the Controller Link Sharing (CLS) scheme. Specifies the maximum ABR traffic that can be allocated in a traffic direction on an interface. It i… |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.21 | ColumnrmIfDirControlLinkShareMinUbr | read-write | current | Configuration in the Controller Link Sharing (CLS) scheme. Specifies a minimum amount of UBR plus (UBR with an mcr guaranteed) traffic that can be reserved in … |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.22 | ColumnrmIfDirControlLinkShareMaxUbr | read-write | current | Configuration in the Controller Link Sharing (CLS) scheme. Specifies the maximum UBR plus traffic that can be allocated in a traffic direction on an interface.… |
| 1.3.6.1.4.1.9.10.10.1.4 | NodeciscoAtmRmIfState | |||
| 1.3.6.1.4.1.9.10.10.1.4.1 | TablermIfServiceCategoryStateTable | not-accessible | current | The (conceptual) table containing Resource Management state information for ATM interfaces by Service Category. |
| 1.3.6.1.4.1.9.10.10.1.4.1.1 | RowrmIfServiceCategoryStateEntry | not-accessible | current | An entry (conceptual row) in the rmIfServiceCategoryStateTable containing Resource Management configuration for an ATM interface. Rows are identified by the va… |
| 1.3.6.1.4.1.9.10.10.1.4.1.1.1 | ColumnrmIfSc | not-accessible | current | The Service Category to which the row applies. |
| 1.3.6.1.4.1.9.10.10.1.4.1.1.2 | ColumnrmIfScRxAcr | read-only | current | The Available Cell Rate (specified in cells per second) for traffic received on the interface for this Service Category. This is the bandwidth available for co… |
| 1.3.6.1.4.1.9.10.10.1.4.1.1.3 | ColumnrmIfScTxAcr | read-only | current | The Available Cell Rate (specified in cells per second) for traffic sent out the interface for this Service Category. This is the bandwidth available for conne… |
| 1.3.6.1.4.1.9.10.10.1.4.1.1.4 | ColumnrmIfScRxAlcr | read-only | current | The Allocated Cell Rate (specified in cells per second) for traffic received on the interface for this Service Category. This is the bandwidth allocated-to con… |
| 1.3.6.1.4.1.9.10.10.1.4.1.1.5 | ColumnrmIfScTxAlcr | read-only | current | The Allocated Cell Rate (specified in cells per second) for traffic sent out the interface for this Service Category. This is the bandwidth allocated-to connec… |
| 1.3.6.1.4.1.9.10.10.1.4.1.1.6 | ColumnrmIfScNumSvxConns | read-only | current | The number of signalled connections (VC or VP) of this Service Category currently allocated on the interface. |
| 1.3.6.1.4.1.9.10.10.1.4.1.1.7 | ColumnrmIfScNumPvxConns | read-only | current | The number of permanent connections (VC or VP) of this Service Category currently allocated on the interface. |
| 1.3.6.1.4.1.9.10.10.1.4.1.1.8 | ColumnrmIfScTxMaxCtd | read-only | current | The maximum Cell Transfer Delay estimated to be experienced by cells of connections transmitted out this interface of this Service Category. This is estimate d… |
| 1.3.6.1.4.1.9.10.10.1.4.1.1.9 | ColumnrmIfScTxP2PeakCdv | read-only | current | The Peak-to-Peak Cell Delay Variation estimated to be experienced by cells of connections transmitted out this interface of this Service Category. This estimat… |
| 1.3.6.1.4.1.9.10.10.1.4.1.1.10 | ColumnrmIfScTxClr | read-only | current | The Cell Loss Ratio estimated to be experienced by cells of connections transmitted out this interface of this Service Category. This is an estimate for clp0 c… |
| 1.3.6.1.4.1.9.10.10.1.4.1.1.11 | ColumnrmIfScTxClrClp01 | read-only | current | The Cell Loss Ratio estimated to be experienced by cells of connections transmitted out this interface of this Service Category. This is an estimate for clp0+1… |
| 1.3.6.1.4.1.9.10.10.1.4.1.1.12 | ColumnrmIfScRxDynBwSvcAcr | read-only | current | The Available Cell Rate (specified in cells per second) for traffic received on the interface for this Service Category. This object is valid only for IMA phys… |
| 1.3.6.1.4.1.9.10.10.1.4.1.1.13 | ColumnrmIfScTxDynBwSvcAcr | read-only | current | The Available Cell Rate (specified in cells per second) for traffic transmitted on the interface for this Service Category. This object is valid only for IMA p… |
| 1.3.6.1.4.1.9.10.10.1.5 | NodeciscoAtmRmIfStatistics | |||
| 1.3.6.1.4.1.9.10.10.1.5.1 | TablermIfServiceCategoryStatisticsTable | not-accessible | current | The (conceptual) table containing Resource Management statistics information for ATM interfaces by Service Category. |
| 1.3.6.1.4.1.9.10.10.1.5.1.1 | RowrmIfServiceCategoryStatisticsEntry | not-accessible | current | An entry (conceptual row) in the rmIfServiceCategoryStatisticsTable containing Resource Management configuration for an ATM interface. Rows are identified by t… |
| 1.3.6.1.4.1.9.10.10.1.5.1.1.1 | ColumnrmIfScRcacResultNumAdmit | read-only | current | The number of successful resource allocation requests for this interface. |
| 1.3.6.1.4.1.9.10.10.1.5.1.1.2 | ColumnrmIfScRcacResultNumTotalRequests | read-only | current | The total number of resource allocation requests for this interface. |
| 1.3.6.1.4.1.9.10.10.1.5.1.1.3 | ColumnrmIfScRcacResultNumFailTraffComb | read-only | current | The number of resource allocation requests which are considered to be in error due to an unsupported combination of traffic parameters. An example of this woul… |
| 1.3.6.1.4.1.9.10.10.1.5.1.1.4 | ColumnrmIfScRcacResultNumFailBw | read-only | current | The number of resource allocation requests which are considered to be in error due to a lack of bandwidth. This will never occur for Best Effort Service Catego… |
| 1.3.6.1.4.1.9.10.10.1.5.1.1.5 | ColumnrmIfScRcacResultNumFailLoss | read-only | current | The number of resource allocation requests which are considered to be in error due to exceeding cell loss criterion. |
| 1.3.6.1.4.1.9.10.10.1.5.1.1.6 | ColumnrmIfScRcacResultNumFailDelay | read-only | current | The number of resource allocation requests which are considered to be in error due to exceeding maximum delay criterion. |
| 1.3.6.1.4.1.9.10.10.1.5.1.1.7 | ColumnrmIfScRcacResultNumFailCdv | read-only | current | The number of resource allocation requests which are considered to be in error due to exceeding cell delay variation criterion. |
| 1.3.6.1.4.1.9.10.10.1.5.1.1.8 | ColumnrmIfScRcacResultNumFailBeLimit | read-only | current | The number of resource allocation requests which are considered to be in error due to exceeding a limit on the number of Best-Effort connections. |
| 1.3.6.1.4.1.9.10.10.1.5.1.1.9 | ColumnrmIfScRcacResultNumFailParmLimit | read-only | current | The number of resource allocation requests which are considered to be in error due to exceeding a traffic parameter limit criterion. |
| 1.3.6.1.4.1.9.10.10.1.5.1.1.10 | ColumnrmIfScRcacResultNumFailOther | read-only | current | The number of resource allocation requests which are considered to be in error for a reason not enumerated by other counter objects. |
| 1.3.6.1.4.1.9.10.10.1.6 | NodeciscoAtmRmIfSharedMem | |||
| 1.3.6.1.4.1.9.10.10.1.6.1 | TablesharedMemRmIfOutputQCfgTable | not-accessible | current | The (conceptual) table containing configuration information for ATM physical interface output queues. This table is not instantiated for interfaces to which it… |
| 1.3.6.1.4.1.9.10.10.1.6.1.1 | RowsharedMemRmIfOutputQCfgEntry | not-accessible | current | An entry (conceptual row) in the sharedMemRmIfOutputQCfgTable containing Resource Management configuration for an ATM interface. A particular row is identified… |
| 1.3.6.1.4.1.9.10.10.1.6.1.1.1 | ColumnsharedMemRmIfOutputQ | not-accessible | current | The output queue on this ATM interface. |
| 1.3.6.1.4.1.9.10.10.1.6.1.1.2 | ColumnsharedMemRmIfOutputQServCategory | read-only | current | The service category(s) sharing this output queue on this ATM interface. The various bit positions are: 1 constant bit rate (cbr) 2 variable bit rate-real time… |
| 1.3.6.1.4.1.9.10.10.1.6.1.1.3 | ColumnsharedMemRmIfOutputQRequestedMaxSize | read-write | current | This object reflects an explicit configuration of the maximum number of cells that may occupy this queue. If the value of this object is 0, the maximum size in… |
| 1.3.6.1.4.1.9.10.10.1.6.1.1.4 | ColumnsharedMemRmIfOutputQInstalledMaxSize | read-only | current | The maximum number of cells that may occupy this queue. Will be a multiple of 32. Explicit configuration of maximum size are made via the object sharedMemrmIfO… |
| 1.3.6.1.4.1.9.10.10.1.6.1.1.5 | ColumnsharedMemRmIfOutputQMaxSizeForce | read-write | current | Must be set to forceChange to allow changing of sharedMemRmIfOutputQRequestedMaxSize for a queue on an interface that is 'up'. This is because such a change ca… |
| 1.3.6.1.4.1.9.10.10.1.6.1.1.6 | ColumnsharedMemRmIfOutputQCellCount | read-only | current | Count of the number of cells in the output queue. |
| 1.3.6.1.4.1.9.10.10.1.6.2 | TablesharedMemRmIfThresholdCfgTable | not-accessible | current | The (conceptual) table containing the output queue thresholds used on ATM physical interface output queues. These are specified per Service Category. This tabl… |
| 1.3.6.1.4.1.9.10.10.1.6.2.1 | RowsharedMemRmIfThresholdCfgEntry | not-accessible | current | An entry (conceptual row) in the sharedMemRmIfThresholdCfgTable containing Resource Management configuration for an ATM interface. A particular row is identifi… |
| 1.3.6.1.4.1.9.10.10.1.6.2.1.1 | ColumnsharedMemRmIfDiscardThreshold | read-write | current | The output queue CLP/EPD threshold for this Service Category on this ATM interface. This is expressed in percent-of-full. Note that 100% full effectively turns… |
| 1.3.6.1.4.1.9.10.10.1.6.2.1.2 | ColumnsharedMemRmIfEfciThreshold | read-write | current | The output queue EFCI marking threshold for this Service Category on this ATM interface. This is expressed in percent-of-full. Note that 100% full effectively … |
| 1.3.6.1.4.1.9.10.10.1.6.2.1.3 | ColumnsharedMemRmIfAbrRelativeRateThreshold | read-write | current | The ABR Relative-rate marking queue congestion threshold for the ABR queue on this ATM interface. This is expressed in percent-of-full. Note that 100% full eff… |
| 1.3.6.1.4.1.9.10.10.1.7 | NodeciscoLsPerVcqAtmRmSwitch | |||
| 1.3.6.1.4.1.9.10.10.1.7.1 | TablelsPerVcqRmThreshGrpTable | not-accessible | current | The (conceptual) table containing information for Switch Threshold Groups. When cells are queued in the switch for a direction of cell traffic on an ATM connec… |
| 1.3.6.1.4.1.9.10.10.1.7.1.1 | RowlsPerVcqRmThreshGrpEntry | not-accessible | current | An entry (conceptual row) in the lsPerVcqRmThreshGrpTable containing Resource Management configuration for a Threshold Group. All entries ever in the table are… |
| 1.3.6.1.4.1.9.10.10.1.7.1.1.1 | ColumnlsPerVcqRmThreshGrp | not-accessible | current | The Threshold Group specified by this entry. |
| 1.3.6.1.4.1.9.10.10.1.7.1.1.2 | ColumnlsPerVcqRmThreshGrpMaxSize | read-write | current | This object specifies the maximum number of cells that may occupy this Threshold Group. While any integer in the range can be set, the hardware granularity is … |
| 1.3.6.1.4.1.9.10.10.1.7.1.1.3 | ColumnlsPerVcqRmThreshGrpQMaxSize | read-write | current | This object reflects an explicit configuration of the maximum limit on the number of cells that may occupy connection queues that are a member of this Threshol… |
| 1.3.6.1.4.1.9.10.10.1.7.1.1.4 | ColumnlsPerVcqRmThreshGrpQMinSize | read-write | current | This object reflects an explicit configuration of the minimum limit on the number of cells that may occupy connection queues that are a member of this Threshol… |
| 1.3.6.1.4.1.9.10.10.1.7.1.1.5 | ColumnlsPerVcqRmThreshGrpDiscThreshold | read-write | current | The output queue CLP/EPD threshold for this Threshold Group. This is expressed in percent-of-full. Note that 100% full effectively turns off the threshold. Set… |
| 1.3.6.1.4.1.9.10.10.1.7.1.1.6 | ColumnlsPerVcqRmThreshGrpMarkThreshold | read-write | current | The output queue EFCI/ABR-RR marking threshold for this Threshold Group. This is expressed in percent-of-full. Note that 100% full effectively turns off the th… |
| 1.3.6.1.4.1.9.10.10.1.7.1.1.7 | ColumnlsPerVcqRmThreshGrpName | read-write | current | The name associated with the threshold-group. If this is set to the null-string, the default name for the Threshold Group is assigned. |
| 1.3.6.1.4.1.9.10.10.1.7.1.1.8 | ColumnlsPerVcqRmThreshGrpCellCount | read-only | current | Count of the number of cells in the Threshold Group. |
| 1.3.6.1.4.1.9.10.10.1.7.2 | TablelsPerVcqRmThreshGrpServiceTable | not-accessible | current | The (conceptual) table specifying which VC or VP queues are assigned to a Threshold Group. |
| 1.3.6.1.4.1.9.10.10.1.7.2.1 | RowlsPerVcqRmThreshGrpServiceEntry | not-accessible | current | An entry (conceptual row) in the lsPerVcqRmThreshGrpServiceTable. All entries ever in the table are present at startup, none are created dynamically. |
| 1.3.6.1.4.1.9.10.10.1.7.2.1.1 | ColumnlsPerVcqRmThreshGrpService | not-accessible | current | The Service specified by this entry. |
| 1.3.6.1.4.1.9.10.10.1.7.2.1.2 | ColumnlsPerVcqRmThreshGrpServGroup | read-write | current | The Threshold Group to which VC/VP queues specified by the service are assigned. Changing the assignment of service to Threshold Group does not alter the assig… |
| 1.3.6.1.4.1.9.10.10.1.7.3 | ScalarlsPerVcqRmHierarchicalSchedulingMode | read-write | current | On a LS1010 equipped with the Lightstream per-VC queueing chipset, the user can define Hierarchical VP-Tunnels. Each such tunnel has its own dedicated schedule… |
| 1.3.6.1.4.1.9.10.10.1.8 | NodeciscoLsPerVcqAtmRmIf | |||
| 1.3.6.1.4.1.9.10.10.1.8.1 | TablelsPerVcqRmIfTable | not-accessible | current | The (conceptual) table containing configuration information for ATM physical interfaces. |
| 1.3.6.1.4.1.9.10.10.1.8.1.1 | RowlsPerVcqRmIfEntry | not-accessible | current | An entry (conceptual row) in the lsPerVcqRmIfTable containing Resource Management configuration for an ATM interface. An entry in the table is present when an … |
| 1.3.6.1.4.1.9.10.10.1.8.1.1.1 | ColumnlsPerVcqRmIfMinWrrServiceClass | read-write | current | The service classes on an interface are partitioned into two subsets, dictating how a service class with a cell ready to transmit is chosen (subsequently a con… |
| 1.3.6.1.4.1.9.10.10.1.8.2 | TablelsPerVcqRmIfServiceClassTable | not-accessible | current | The (conceptual) table containing configuration information for ATM physical interface Service Classes (not logical port ATM interfaces). An ATM connection (VC… |
| 1.3.6.1.4.1.9.10.10.1.8.2.1 | RowlsPerVcqRmIfServiceClassEntry | not-accessible | current | An entry (conceptual row) in the lsPerVcqRmIfServiceClassTable containing Resource Management configuration for an ATM interface. A particular row is identifie… |
| 1.3.6.1.4.1.9.10.10.1.8.2.1.1 | ColumnlsPerVcqRmIfServiceClass | not-accessible | current | The service class on this ATM interface. |
| 1.3.6.1.4.1.9.10.10.1.8.2.1.2 | ColumnlsPerVcqRmIfServClassConnType | read-only | current | The types of connections using this service class on this ATM interface. The various bit positions are: 1 constant bit rate (cbr) 2 variable bit rate-real time… |
| 1.3.6.1.4.1.9.10.10.1.8.2.1.3 | ColumnlsPerVcqRmIfServClassWrrWeight | read-write | current | Configure the weighting specified for a service class to make the scheduling decision among active service classes in the WRR subset. |
| 1.3.6.1.4.1.9.10.10.1.9 | NodeciscoCgrPerVcqAtmRmSwitch | |||
| 1.3.6.1.4.1.9.10.10.1.9.1 | TablecgrPerVcqRmThreshGrpTable | not-accessible | current | The (conceptual) table containing information for Switch Threshold Groups. When cells are queued in the switch for a direction of cell traffic on an ATM connec… |
| 1.3.6.1.4.1.9.10.10.1.9.1.1 | RowcgrPerVcqRmThreshGrpEntry | not-accessible | current | An entry (conceptual row) in the cgrPerVcqRmThreshGrpTable containing Resource Management configuration for a Threshold Group. All entries ever in the table ar… |
| 1.3.6.1.4.1.9.10.10.1.9.1.1.1 | ColumncgrPerVcqModuleId | not-accessible | current | The switching module specified by this entry. |
| 1.3.6.1.4.1.9.10.10.1.9.1.1.2 | ColumncgrPerVcqRmThreshGrp | not-accessible | current | The Threshold Group specified by this entry. |
| 1.3.6.1.4.1.9.10.10.1.9.1.1.3 | ColumncgrPerVcqRmThreshGrpMaxSize | read-write | current | This object specifies the maximum number of cells that may occupy this Threshold Group. While any integer in the range can be set, the hardware granularity is … |
| 1.3.6.1.4.1.9.10.10.1.9.1.1.4 | ColumncgrPerVcqRmThreshGrpQMaxSize | read-write | current | This object reflects an explicit configuration of the maximum limit on the number of cells that may occupy connection queues that are a member of this Threshol… |
| 1.3.6.1.4.1.9.10.10.1.9.1.1.5 | ColumncgrPerVcqRmThreshGrpQMinSize | read-write | current | This object reflects an explicit configuration of the minimum limit on the number of cells that may occupy connection queues that are a member of this Threshol… |
| 1.3.6.1.4.1.9.10.10.1.9.1.1.6 | ColumncgrPerVcqRmThreshGrpDiscThreshold | read-write | current | The output queue CLP/EPD threshold for this Threshold Group. This is expressed in percent-of-full. Note that 100% full effectively turns off the threshold. Set… |
| 1.3.6.1.4.1.9.10.10.1.9.1.1.7 | ColumncgrPerVcqRmThreshGrpMarkThreshold | read-write | current | The output queue EFCI/ABR-RR marking threshold for this Threshold Group. This is expressed in percent-of-full. Note that 100% full effectively turns off the th… |
| 1.3.6.1.4.1.9.10.10.1.9.1.1.8 | ColumncgrPerVcqRmThreshGrpName | read-write | current | The name associated with the threshold-group. If this is set to the null-string, the default name for the Threshold Group is assigned. |
| 1.3.6.1.4.1.9.10.10.1.9.1.1.9 | ColumncgrPerVcqRmThreshGrpCellCount | read-only | current | Count of the number of cells in the Threshold Group. |
| 1.3.6.1.4.1.9.10.10.1.9.2 | TablecgrPerVcqRmThreshGrpServiceTable | not-accessible | current | The (conceptual) table specifying which VC or VP queues are assigned to a Threshold Group. This table is supported only on the Catalyst8540MSR Platform. |
| 1.3.6.1.4.1.9.10.10.1.9.2.1 | RowcgrPerVcqRmThreshGrpServiceEntry | not-accessible | current | An entry (conceptual row) in the cgrPerVcqRmThreshGrpServiceTable. All entries ever in the table are present at startup, none are created dynamically. |
| 1.3.6.1.4.1.9.10.10.1.9.2.1.1 | ColumncgrPerVcqRmThreshGrpService | not-accessible | current | The Service specified by this entry. |
| 1.3.6.1.4.1.9.10.10.1.9.2.1.2 | ColumncgrPerVcqRmThreshGrpServGroup | read-write | current | The Threshold Group to which VC/VP queues specified by the service are assigned. Changing the assignment of service to Threshold Group does not alter the assig… |
| 1.3.6.1.4.1.9.10.10.1.9.3 | ScalarcgrPerVcqRmHierarchicalSchedulingMode | read-write | current | On a Catalyst8540 MSR, the user can define Hierarchical VP-Tunnels. Each such tunnel has its own dedicated scheduler, programmed to output data at a configurab… |
| 1.3.6.1.4.1.9.10.10.1.10 | NodeciscoAtmRmTrafShaperIf | |||
| 1.3.6.1.4.1.9.10.10.1.10.1 | TablermTrafficShaperIfTable | not-accessible | current | The (conceptual) table containing ATM Traffic Shaper configuration and state information for ATM interfaces. |
| 1.3.6.1.4.1.9.10.10.1.10.1.1 | RowrmTrafficShaperIfEntry | not-accessible | current | An entry (conceptual row) in the rmTrafficShaperIfTable containing Traffic Shaper configuration and state information for an ATM interface. The particular inte… |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.1 | ColumnrtsIfMaxThreshold | read-only | current | This object reflects the value of the Maximum Threshold installed in the traffic shaper hardware for this interface. This object is expressed in number of cell… |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.2 | ColumnrtsIfCellCount | read-only | current | This object contains the count of cells queued to this interface in the traffic shaping hardware. This object is not instantiated for interfaces to which it ca… |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.3 | ColumnrtsIfVbrCfgRequested | read-write | current | If this object is set to the value 'shapingDisable', VBR connections(VC or VP) on this interface will not be shaped. If the object is set to the value 'shapeTo… |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.4 | ColumnrtsIfVbrCfgInstalled | read-only | current | This object reflects the current VBR Traffic Shaping configuration installed in the hardware. This object is not instantiated for interfaces to which it cannot… |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.5 | ColumnrtsIfBeCfgRequested | read-write | current | This object reflects the traffic shaping configuration applied to Best-Effort Connections(VC or VP) belonging to UBR and ABR service categories on this interfa… |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.6 | ColumnrtsIfBeCfgInstalled | read-only | current | This object reflects the current Best-Effort Traffic Shaping configuration installed in the hardware. This object is not instantiated for interfaces to which i… |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.7 | ColumnrtsIfVbrClassMaxThrshRequested | read-write | current | This object specifies the Traffic Shaper Maximum Cell Buffer Threshold for the VBR Traffic Class. The value of this object is expressed as a percent of the val… |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.8 | ColumnrtsIfVbrClassMaxThrshInstalled | read-only | current | This object reflects the value of Maximum Class Threshold for VBR Traffic Class, in number of cell buffers, that is installed in the Traffic Shaping hardware. … |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.9 | ColumnrtsIfBeClassMaxThrshRequested | read-write | current | This object specifies the Traffic Shaper Maximum Cell Buffer Threshold for the Best-Effort Traffic Class. The value of this object is expressed as a percent of… |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.10 | ColumnrtsIfBeClassMaxThrshInstalled | read-only | current | This object reflects the value of Maximum Class Threshold for Best-Effort Traffic Class, in number of cell buffers, that is installed in the Traffic Shaping ha… |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.11 | ColumnrtsIfVbrVcMaxThrshRequested | read-write | current | This object reflects the Maximum Threshold of the per-connection queues of VBR connections(VCs or VPs) in the traffic shaping hardware. The value of this objec… |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.12 | ColumnrtsIfVbrVcMaxThrshInstalled | read-only | current | This object reflects the Maximum Threshold for the per-connection queues of VBR connections(VCs or VPs) that is installed in the Traffic Shaping hardware. The … |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.13 | ColumnrtsIfBeVcMaxThrshRequested | read-write | current | This object reflects the Maximum Threshold of the per-connection queues of best-effort connections(VCs or VPs) in the traffic shaping hardware. The value of th… |
| 1.3.6.1.4.1.9.10.10.1.10.1.1.14 | ColumnrtsIfBeVcMaxThrshInstalled | read-only | current | This object reflects the Maximum Threshold for the per-connection queues of Best-Effort connections(VCs or VPs) that is installed in the Traffic Shaping hardwa… |
| 1.3.6.1.4.1.9.10.10.3 | NodeciscoAtmRmMIBConformance | |||
| 1.3.6.1.4.1.9.10.10.3.1 | NodeciscoAtmRmMIBCompliances | |||
| 1.3.6.1.4.1.9.10.10.3.1.1 | ComplianceciscoAtmRmMIBCompliance | obsolete | The compliance statement for the Cisco ATM Resource Management MIB. | |
| 1.3.6.1.4.1.9.10.10.3.1.2 | ComplianceciscoAtmRmMIBCompliance2 | obsolete | The compliance statement for the Cisco ATM Resource Management MIB. | |
| 1.3.6.1.4.1.9.10.10.3.1.3 | ComplianceciscoAtmRmMIBCompliance3 | obsolete | The compliance statement for the Cisco ATM Resource Management MIB. | |
| 1.3.6.1.4.1.9.10.10.3.1.4 | ComplianceciscoAtmRmMIBCompliance4 | obsolete | The compliance statement for the Cisco ATM Resource Management MIB. | |
| 1.3.6.1.4.1.9.10.10.3.1.5 | ComplianceciscoAtmRmMIBCompliance5 | obsolete | The compliance statement for the Cisco ATM Resource Management MIB. | |
| 1.3.6.1.4.1.9.10.10.3.1.6 | ComplianceciscoAtmRmMIBCompliance6 | obsolete | The compliance statement for the Cisco ATM Resource Management MIB. | |
| 1.3.6.1.4.1.9.10.10.3.1.7 | ComplianceciscoAtmRmMIBCompliance7 | obsolete | The compliance statement for the Cisco ATM Resource Management MIB. | |
| 1.3.6.1.4.1.9.10.10.3.1.8 | ComplianceciscoAtmRmMIBCompliance8 | obsolete | The compliance statement for the Cisco ATM Resource Management MIB. | |
| 1.3.6.1.4.1.9.10.10.3.1.9 | ComplianceciscoAtmRmMIBCompliance9 | obsolete | The compliance statement for the Cisco ATM Resource Management MIB. | |
| 1.3.6.1.4.1.9.10.10.3.1.10 | ComplianceciscoAtmRmMIBCompliance10 | obsolete | The compliance statement for the Cisco ATM Resource Management MIB. | |
| 1.3.6.1.4.1.9.10.10.3.1.11 | ComplianceciscoAtmRmMIBCompliance11 | obsolete | The compliance statement for the Cisco ATM Resource Management MIB. | |
| 1.3.6.1.4.1.9.10.10.3.1.12 | ComplianceciscoAtmRmMIBCompliance12 | deprecated | The compliance statement for the Cisco ATM Resource Management MIB. | |
| 1.3.6.1.4.1.9.10.10.3.1.13 | ComplianceciscoAtmRmMIBCompliance13 | current | The compliance statement for the Cisco ATM Resource Management MIB. | |
| 1.3.6.1.4.1.9.10.10.3.2 | NodeciscoAtmRmMIBGroups | |||
| 1.3.6.1.4.1.9.10.10.3.2.1 | GroupatmRmSwitchCfgMIBGroup | obsolete | A collection of objects which provide ATM Switch Resource Management configuration. | |
| 1.3.6.1.4.1.9.10.10.3.2.2 | GroupsharedMemAtmRmSwitchMIBGroup | current | A collection of objects which provide ATM Switch Resource Management information global to a shared-memory ATM switch. | |
| 1.3.6.1.4.1.9.10.10.3.2.3 | GroupatmRmPhyIfCfgMIBGroup | obsolete | A collection of objects which provide ATM interface Resource Management configuration for physical interfaces. | |
| 1.3.6.1.4.1.9.10.10.3.2.4 | GroupatmRmAllIfCfgMIBGroup | obsolete | A collection of objects which provide ATM interface Resource Management configuration for all interfaces. | |
| 1.3.6.1.4.1.9.10.10.3.2.5 | GroupatmRmIfAllStateMIBGroup | obsolete | A collection of objects which provide ATM interface Resource Management status for all interfaces. | |
| 1.3.6.1.4.1.9.10.10.3.2.6 | GroupatmRmIfStatsMIBGroup | current | A collection of objects which provide ATM Switch Resource Management statistics. | |
| 1.3.6.1.4.1.9.10.10.3.2.7 | GroupsharedMemAtmRmPhyIfMIBGroup | current | A collection of objects which provide ATM interface Resource Management information for physical interfaces of a shared-memory ATM switch. | |
| 1.3.6.1.4.1.9.10.10.3.2.8 | GroupatmRmSwitchCfgMIBGroup2 | current | A collection of objects which provide ATM Switch Resource Management configuration. | |
| 1.3.6.1.4.1.9.10.10.3.2.9 | GroupatmRmPhyIfCfgMIBGroup2 | obsolete | A collection of objects which provide ATM interface Resource Management configuration for physical interfaces. | |
| 1.3.6.1.4.1.9.10.10.3.2.10 | GroupatmRmIfAllStateMIBGroup2 | obsolete | A collection of objects which provide ATM interface Resource Management status for all interfaces. | |
| 1.3.6.1.4.1.9.10.10.3.2.11 | GrouplsPerVcqAtmRmGroup | obsolete | A collection of objects which provide ATM Resource Management status on platforms using the Lightstream per-VC queueing chipset. | |
| 1.3.6.1.4.1.9.10.10.3.2.12 | GroupatmRmPhyIfCfgMIBGroup3 | obsolete | A collection of objects which provide ATM interface Resource Management configuration for physical interfaces. | |
| 1.3.6.1.4.1.9.10.10.3.2.13 | GroupatmRmAllIfCfgMIBGroup2 | obsolete | A collection of objects which provide ATM interface Resource Management configuration for all interfaces. | |
| 1.3.6.1.4.1.9.10.10.3.2.14 | GroupatmRmAllIfCfgMIBGroup3 | obsolete | A collection of objects which provide ATM interface Resource Management configuration for all interfaces. | |
| 1.3.6.1.4.1.9.10.10.3.2.15 | GrouplsPerVcqAtmRmGroup2 | current | A collection of objects which provide ATM Resource Management status on platforms using the Lightstream per-VC queueing chipset. | |
| 1.3.6.1.4.1.9.10.10.3.2.16 | GroupcgrPerVcqAtmRmGroup | obsolete | A collection of objects which provide ATM Resource Management status on the Catalyst8540MSR platform. | |
| 1.3.6.1.4.1.9.10.10.3.2.17 | GroupatmRmAllIfCfgMIBGroup4 | obsolete | A collection of objects which provide ATM interface Resource Management configuration for all interfaces. | |
| 1.3.6.1.4.1.9.10.10.3.2.18 | GroupatmRmPhyIfCfgMIBGroup4 | obsolete | A collection of objects which provide ATM interface Resource Management configuration for physical interfaces. | |
| 1.3.6.1.4.1.9.10.10.3.2.19 | GroupatmRmPhyIfCfgMIBGroup5 | current | A collection of objects which provide ATM interface Resource Management configuration for physical interfaces. | |
| 1.3.6.1.4.1.9.10.10.3.2.20 | GroupatmRmIfAllStateMIBGroup3 | current | A collection of objects which provide ATM interface Resource Management status for all interfaces. | |
| 1.3.6.1.4.1.9.10.10.3.2.21 | GroupatmRmAllIfCfgMIBGroup5 | deprecated | A collection of objects which provide ATM interface Resource Management configuration for all interfaces. | |
| 1.3.6.1.4.1.9.10.10.3.2.22 | GroupcgrPerVcqAtmRmGroup2 | current | A collection of objects which provide ATM Resource Management status on the Catalyst8540MSR platform. | |
| 1.3.6.1.4.1.9.10.10.3.2.23 | GroupatmRmTrafficShaperIfGroup | current | A collection of objects which provide ATM Traffic Shaper configuration and state information for ATM interfaces. | |
| 1.3.6.1.4.1.9.10.10.3.2.24 | GroupatmRmAllIfCfgMIBGroup6 | current | A collection of objects which provide ATM interface Resource Management configuration for all interfaces. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CgrPerVcqModuleId | INTEGER { module1(1), module2(2), module3(3), module4(4), module5(5), module6(6), module7(7), module8(8) } | current | The Catalyst8540MSR has 8 switching modules. Each module has its own cell memory, and performs its own congestion control, independent of the other switching modules. |
| FineQueueThreshold | INTEGER { percent12(1), percent25(2), percent37(3), percent50(4), percent62(5), percent75(6), percent87(7), percent100(8) } | current | This data type is used to represent thresholds for output-queues on a shared memory ATM switch. |
| ForceValue | INTEGER { forceChange(1), noForceChange(2) } | current | This data type is used to provide a standard mechanism for providing protection on writing to objects. An object of type ForceValue is associated with the protected object. If an set request is made for the protected ob… |
| LsPerVcqServiceClass | INTEGER { c1(1), c2(2), c3(3), c4(4), c5(5), c6(6), c7(7), c8(8) } | current | This data type is used to represent one of the Service Classes. |
| LsPerVcqServiceClassNoC1 | INTEGER { c2(2), c3(3), c4(4), c5(5), c6(6), c7(7), c8(8) } | current | This data type is used to represent one of the Service Classes, omitting c1. |
| LsPerVcqThresholdGroup | INTEGER { tg1(1), tg2(2), tg3(3), tg4(4), tg5(5), tg6(6), tg7(7), tg8(8), tg9(9), tg10(10), tg11(11), tg12(12), tg13(13), tg14(14), tg15(15), tg16(16) } | current | This data type is used to represent one of the Threshold Groups. |
| LsPerVcqThresholdGroupService | INTEGER { cbr(1), vbrRt(2), vbrNrt(3), abr(4), ubr(5) } | current | This data type is used to specify how VC/VP queues are assigned to Threshold Groups. |