CISCO-ATM-SIG-DIAG-MIB
59 objects
The MIB module to facilitate the diagnosis of failures of ATM Signalling requests. Through this MIB, an ATM device retains information for one, or possibly more, connection setup failure records. Each record stores information about those connection setup failures which match a set of selection criteria, such as particular Calling or Called ATM Addresses.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | InterfaceIndexOrZero |
| PNNI-MIB | PnniNodeId PnniPortId ServiceCategory |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.78 | IdentityciscoAtmSigDiagMIB | The MIB module to facilitate the diagnosis of failures of ATM Signalling requests. Through this MIB, an ATM device retains information for one, or possibly mor… | ||
| 1.3.6.1.4.1.9.9.78.1 | NodeciscoSigFailMIBObjects | |||
| 1.3.6.1.4.1.9.9.78.1.1 | NodecsfBaseGroup | |||
| 1.3.6.1.4.1.9.9.78.1.1.1 | ScalarcsfFilterControl | read-write | current | This object enables or disables the call failure filtering feature in the ATM device. When this object is modified from 'enable' to 'disable' the records in th… |
| 1.3.6.1.4.1.9.9.78.1.2 | NodecsfFilterGroup | |||
| 1.3.6.1.4.1.9.9.78.1.2.1 | TablecsfFilterTable | not-accessible | current | The table whose entries describe the filtering criteria for recording failed connection setup requests. |
| 1.3.6.1.4.1.9.9.78.1.2.1.1 | RowcsfFilterEntry | not-accessible | current | Each entry in this table corresponds to a filtering criteria based on which the rejected calls are recorded. This selection criteria is applied against all con… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.1 | ColumncsfFilterIndex | not-accessible | current | An arbitrary integer uniquely identifying a filtering criteria. |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.2 | ColumncsfFilterScope | read-create | current | This object restricts the scope of the filter to calls which where rejected either within the system in which the filtering is in progress or to calls which we… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.3 | ColumncsfFilterConnKind | read-create | current | This object enables the user to track failures of soft permanent virtual channel connections, soft permanent virtual path connections, switched virtual channel… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.4 | ColumncsfFilterConnCastType | read-create | current | This object restricts the scope of the filter based on the type of topology of connections (point-to-point or point-to-multipoint). |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.5 | ColumncsfFilterServiceCategory | read-create | current | This object restricts the scope of the filter to calls belonging to service categories represented by this object. |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.6 | ColumncsfFilterInInterface | read-create | current | This object restricts the scope of the filter to calls which entered the ATM device through the port represented by this object It has the value 0, or the ifIn… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.7 | ColumncsfFilterOutInterface | read-create | current | This object restricts the scope of the filter to calls which exited the ATM device through the port represented by this object It has the value 0, or the ifInd… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.8 | ColumncsfFilterCause | read-create | current | This object restricts the scope of the filter to calls which were cleared with the cause code represented by this object. The values are the same as the clear … |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.9 | ColumncsfFilterCallingParty | read-create | current | The combination of this object and the corresponding instance of csfFilterCallingPartyMask is one selection criteria for this record. To match this selection c… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.10 | ColumncsfFilterCallingPartyMask | read-create | current | The combination of this object and the corresponding instance of csfFilterCallingParty is one selection criteria for this record. To match this selection crite… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.11 | ColumncsfFilterCalledParty | read-create | current | The combination of this object and the corresponding instance of csfFilterCalledPartyMask is one selection criteria for this record. To match this selection cr… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.12 | ColumncsfFilterCalledPartyMask | read-create | current | The combination of this object and the corresponding instance of csfFilterCalledParty is one selection criteria for this record. To match this selection criter… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.13 | ColumncsfFilterMaxRecords | read-create | current | The maximum number of entries that are desired in the csfRecordTable on behalf of this entry. The agent will not create more than this number of entries in the… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.14 | ColumncsfFilterAgeTimeout | read-create | current | The number of seconds left for this entry to age out. On expiry of this timer filtering is disabled for this entry. The display records in the csfRecordTable c… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.15 | ColumncsfFilterPurge | read-create | current | The object provides a facility for the user to purge the records in the csfRecordTable corresponding to this entry. When the value is set to 'purge', the recor… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.16 | ColumncsfFilterNumMatches | read-only | current | A monotonically increasing counter to keep track of the number of call failures that matched this entry for the entire lifetime of this entry. |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.17 | ColumncsfFilterRowStatus | read-create | current | Indicates the status of this row. Used according to the row installation and removal conventions. This object can be used to temporarily inactivate an entry in… |
| 1.3.6.1.4.1.9.9.78.1.3 | NodecsfRecordGroup | |||
| 1.3.6.1.4.1.9.9.78.1.3.1 | TablecsfRecordTable | not-accessible | current | The table in which the failures of ATM Signalling connection setup requests are recorded. |
| 1.3.6.1.4.1.9.9.78.1.3.1.1 | RowcsfRecordEntry | not-accessible | current | An entry representing one connection setup request failure record. The csfRecordFilterIndex represents the index into the csfFilterTable whose entry is the fil… |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.1 | ColumncsfRecordIndex | not-accessible | current | An arbitrary integer used to distinguish between multiple records for the same filtering criteria. |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.2 | ColumncsfRecordScope | read-only | current | This object indicates the location of the call failure. |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.3 | ColumncsfRecordConnKind | read-only | current | This object represents the use of call control of the rejected connection. |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.4 | ColumncsfRecordConnCastType | read-only | current | This object represents the type of topology of the rejected call (point-to-point or point-to-multipoint). |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.5 | ColumncsfRecordConnIndicator | read-only | current | Indicates whether this record was created due to an add party failure or a setup failure. |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.6 | ColumncsfRecordServiceCategory | read-only | current | This object represents the service category used by the call. |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.7 | ColumncsfRecordInInterface | read-only | current | The IfIndex of the incoming port on which this call was received by the ATM device. |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.8 | ColumncsfRecordOutInterface | read-only | current | The IfIndex of the outgoing port ,if available, through which this call was routed to the network. The distinguished value zero indicates that the call was rej… |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.9 | ColumncsfRecordCause | read-only | current | This object identifies the reason for the call failure. When a PNNI Crankback information element is included in the call clearing message, this object contain… |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.10 | ColumncsfRecordDiags | read-only | current | This object contains the contents of the diagnostics fields from the Cause information element. When the value of csfRecordCause is 49,'Quality of Service unav… |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.11 | ColumncsfRecordCallingParty | read-only | current | Indicates the ATM adddress of the calling party in the rejected call. |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.12 | ColumncsfRecordCallingPartySubAddress | read-only | current | Indicates the ATM sub-adddress of the calling party in the rejected call. The presence of a sub address is not mandatory. If the calling sub-addresses is not p… |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.13 | ColumncsfRecordCalledParty | read-only | current | Indicates the ATM address of the called party in the rejected call. |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.14 | ColumncsfRecordCalledPartySubAddress | read-only | current | Indicates the ATM sub-adddress of the called party in the rejected call. The presence of a sub address is not mandatory. If the called sub-address is not prese… |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.15 | ColumncsfRecordCrankBackTransitType | read-only | current | This object identifies the type of blockage in case of a blocked call. This object has a value 'noCrankBack' if the call was cleared without a crankback inform… |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.16 | ColumncsfRecordCrankBackNodeId | read-only | current | This object depends on the csfRecordCrankBackTransitType object. When that object value is 'blockedNode', csfRecordCrankBackNodeId indicates the node ID of the… |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.17 | ColumncsfRecordCrankBackPortId | read-only | current | When the csfRecordCrankBackTransitType object value is 'blockedLink', this object identifies a logical port of the blocked link's preceeding node identifier. T… |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.18 | ColumncsfRecordCrankBackSucceedingNodeId | read-only | current | This object depends on the csfRecordCrankBackTransitType object. If the csfRecordCrankBackNodeId object value is 'blockedLink' then the value of this object wi… |
| 1.3.6.1.4.1.9.9.78.1.3.1.1.19 | ColumncsfRecordTimeStamp | read-only | current | The time at which this record entry was created. |
| 1.3.6.1.4.1.9.9.78.1.3.2 | TablecsfDtlTable | not-accessible | current | The table in which the Designated Transit List (DTL)stacks (i.e., source routes) of failed calls are recorded. Each DTL identifies a source route through a sin… |
| 1.3.6.1.4.1.9.9.78.1.3.2.1 | RowcsfDtlEntry | not-accessible | current | A segment of the DTL stack. The complete DTL stack is formed by traversing the rows of the table for which the csfFilterIndex and csfRecordIndex are the same. … |
| 1.3.6.1.4.1.9.9.78.1.3.2.1.1 | ColumncsfDtlEntryIndex | not-accessible | current | The index in the current DTL stack of this entry. This index represents the the order of this entry in the DTL stack. |
| 1.3.6.1.4.1.9.9.78.1.3.2.1.2 | ColumncsfDtlNodeId | read-only | current | Each entry in the DTL table corresponds to a node/port tuple based on which a source route through the peer group is built. This object represents the node id … |
| 1.3.6.1.4.1.9.9.78.1.3.2.1.3 | ColumncsfDtlPortId | read-only | current | Each entry in the DTL table corresponds to a node/port tuple based on which a source route through the peer group is built. This object represents the port id … |
| 1.3.6.1.4.1.9.9.78.1.3.2.1.4 | ColumncsfDtlLinkType | read-only | current | The type of link out from the node identified by csfDtlNodeId. This is well defined even if the specific port is not specified. A value 'horizontal' indicates … |
| 1.3.6.1.4.1.9.9.78.3 | NodeciscoSigFailMIBConformance | |||
| 1.3.6.1.4.1.9.9.78.3.1 | NodeciscoSigFailMIBCompliances | |||
| 1.3.6.1.4.1.9.9.78.3.1.1 | ComplianceciscoSigFailMIBCompliance | current | The compliance statement for entities which implement the Cisco ATM Signalling Diagnostic MIB | |
| 1.3.6.1.4.1.9.9.78.3.2 | NodeciscoSigFailMIBGroups | |||
| 1.3.6.1.4.1.9.9.78.3.2.1 | GroupciscoSigFailGeneralGroup | current | A collection of objects which help in diagnosing ATM signalling failures. | |
| 1.3.6.1.4.1.9.9.78.3.2.2 | GroupciscoSigFailMIBGroup | current | A collection of objects which help in diagnosing ATM signalling failures. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtmAddr | OCTET STRING (SIZE(0|8|20)) | current | The ATM address used by the network entity. The address types are: no address (0 octets), E.164 (8 octets), and NSAP (20 octets). Note: The E.164 address is encoded in BCD format. |