CISCO-ATM-SWITCH-FR-RM-MIB
32 objects
This MIB module describes a set of objects used for switch Resource Management (RM) for Frame Relay/Frame based User-to-Network (FUNI) to ATM interworking function (IWF) connections. Please refer to the Frame Relay Forum documents FRF.5 and FRF.8 for details on the Frame Relay to ATM Interworking Functions. For details on FUNI, please refer to the ATM Forum FUNI Specification document. These objects are applicable to Frame Relay and FUNI interfaces present on the Frame Relay Port Adapter Module (PAM). Initial version of this MIB module.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.110 | IdentityciscoAtmSwitchFrRmMIB | This MIB module describes a set of objects used for switch Resource Management (RM) for Frame Relay/Frame based User-to-Network (FUNI) to ATM interworking func… | ||
| 1.3.6.1.4.1.9.9.110.1 | NodeciscoAtmSwitchFrRmMIBObjects | |||
| 1.3.6.1.4.1.9.9.110.1.1 | NodecfaAdapter | |||
| 1.3.6.1.4.1.9.9.110.1.1.1 | TablecfaAdapterIfVcQThresholdTable | not-accessible | current | A table of per-VC queue threshold parameters that are used for congestion control for Frame Relay/FUNI to ATM Interworking Function connections, on the Frame R… |
| 1.3.6.1.4.1.9.9.110.1.1.1.1 | RowcfaAdapterIfVcQThresholdEntry | not-accessible | current | A set of per-VC queue threshold parameters that are used for congestion control for Frame Relay/FUNI to ATM Interworking Function connections, on the Frame Rel… |
| 1.3.6.1.4.1.9.9.110.1.1.1.1.1 | ColumncfaAdapterIfVcQService | not-accessible | current | The service category of the connection to which this entry applies. |
| 1.3.6.1.4.1.9.9.110.1.1.1.1.2 | ColumncfaAdapterIfVcQInqDiscThresh | read-write | current | This object defines the Discard Eligible threshold applied to the Frame Relay - ATM interworking virtual circuit input queue, on the Frame Relay PAM. The input… |
| 1.3.6.1.4.1.9.9.110.1.1.1.1.3 | ColumncfaAdapterIfVcQOutqDiscThresh | read-write | current | This object defines the Discard Eligible threshold applied to the Frame Relay - ATM interworking virtual circuit output queue, on the Frame Relay PAM. The outp… |
| 1.3.6.1.4.1.9.9.110.1.1.1.1.4 | ColumncfaAdapterIfVcQInqMarkThresh | read-write | current | This object defines the Marking threshold applied to the Frame Relay - ATM interworking virtual circuit input queue, on the Frame Relay PAM. The input queue is… |
| 1.3.6.1.4.1.9.9.110.1.1.1.1.5 | ColumncfaAdapterIfVcQOutqMarkThresh | read-write | current | This object defines the Marking threshold applied to the Frame Relay - ATM interworking virtual circuit output queue, on the Frame Relay PAM. The output queue … |
| 1.3.6.1.4.1.9.9.110.1.1.2 | TablecfaAdapterIfVbrServOflowTable | not-accessible | current | A table of Resource Management parameters that are used for VBR Overflow Servicing for Frame Relay/FUNI to ATM Interworking Function connections, on the Frame … |
| 1.3.6.1.4.1.9.9.110.1.1.2.1 | RowcfaAdapterIfVbrServOflowEntry | not-accessible | current | A set of Resource Management parameters that are used for VBR Overflow Servicing for Frame Relay/FUNI to ATM Interworking Function connections, on the Frame Re… |
| 1.3.6.1.4.1.9.9.110.1.1.2.1.1 | ColumncfaAdapterIfVbrServOflow | read-write | current | Configuration to enable the overflow feature for VBR-NRT connections on the interface. When the PAM services VBR-NRT VC input queues, sending ATM traffic to th… |
| 1.3.6.1.4.1.9.9.110.1.1.3 | TablecfaAdapterIfFrConfigTable | not-accessible | current | A table of resource management parameters for the Frame Relay interface on the FR/FUNI Port Adapter Module. |
| 1.3.6.1.4.1.9.9.110.1.1.3.1 | RowcfaAdapterIfFrConfigEntry | not-accessible | current | An entry in the table, containing information about Resource Management of an Interface with Frame Relay encapsulation. |
| 1.3.6.1.4.1.9.9.110.1.1.3.1.1 | ColumncfaAdapterIfOverbooking | read-write | current | This object defines overbooking of CIR on an acess link/port in percent of access rate. The total of all CIR's for all frame-relay pvc's and frame-relay soft-v… |
| 1.3.6.1.4.1.9.9.110.1.2 | NodecfaInterwork | |||
| 1.3.6.1.4.1.9.9.110.1.2.1 | TablecfaInterworkIfResourceTable | not-accessible | current | A table of objects that can be used to view available and allocated resources on Frame Relay and FUNI interfaces defined on a Frame Relay Port Adapter Module (… |
| 1.3.6.1.4.1.9.9.110.1.2.1.1 | RowcfaInterworkIfResourceEntry | not-accessible | current | A set of objects that can be used to view available and allocated resources on Frame Relay and FUNI interfaces defined on a Frame Relay Port Adapter Module (PA… |
| 1.3.6.1.4.1.9.9.110.1.2.1.1.1 | ColumncfaInterworkIfVcQService | not-accessible | current | The service category of the connection to which this entry applies. |
| 1.3.6.1.4.1.9.9.110.1.2.1.1.2 | ColumncfaInterworkIfRxAvailRate | read-only | current | The available bit rate for traffic received on the Frame Relay interface. This is the bandwidth available for connections. This value decreases as a result of … |
| 1.3.6.1.4.1.9.9.110.1.2.1.1.3 | ColumncfaInterworkIfTxAvailRate | read-only | current | The available bit rate for traffic sent out the Frame Relay interface. This is the bandwidth available for connections. This value decreases as a result of set… |
| 1.3.6.1.4.1.9.9.110.1.2.1.1.4 | ColumncfaInterworkIfRxAllocRate | read-only | current | The allocated bit rate for traffic received on the Frame Relay interface. This is the bandwidth allocated to connections. This value increases as a result of s… |
| 1.3.6.1.4.1.9.9.110.1.2.1.1.5 | ColumncfaInterworkIfTxAllocRate | read-only | current | The allocated bit rate for traffic sent out the Frame Relay interface. This is the bandwidth allocated to connections. This value increases as a result of setu… |
| 1.3.6.1.4.1.9.9.110.2 | NodeciscoAtmSwitchFrRmMIBNotifications | |||
| 1.3.6.1.4.1.9.9.110.3 | NodeciscoAtmSwitchFrRmMIBConformance | |||
| 1.3.6.1.4.1.9.9.110.3.1 | NodeciscoAtmSwitchFrRmMIBCompliances | |||
| 1.3.6.1.4.1.9.9.110.3.1.1 | ComplianceciscoAtmSwitchFrRmMIBCompliance | current | The compliance statement for the Cisco Frame Relay/FUNI to ATM Interworking Function Resource Management MIB. | |
| 1.3.6.1.4.1.9.9.110.3.2 | NodeciscoAtmSwitchFrRmMIBGroups | |||
| 1.3.6.1.4.1.9.9.110.3.2.1 | GroupcfaAdapterGroup | current | A collection of objects which manage resources for Cisco Frame Relay/FUNI to ATM Interworking Function connections. | |
| 1.3.6.1.4.1.9.9.110.3.2.2 | GroupcfaInterworkGroup | current | A collection of objects which manage resources for Cisco Frame Relay/FUNI to ATM Interworking Function connections. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CfaInterworkServiceCategory | INTEGER { vbrNrt(1), abr(2), ubr(3) } | current | This data type is used to specify the service category of a Frame Relay/FUNI to ATM interworking connection. For definitions of service categories, please refer to the ATM Forum Traffic Management Specification. The cur… |