CISCO-ATM-TRAFFIC-MIB
21 objects
This MIB module is an extension to traffic OIDs and variables defined in rfc1695.
Imported Objects
| ATM-MIB | atmTrafficDescrParamEntry |
| CISCO-SMI | -- RFC 1695 ciscoExperiment |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.11 | IdentityciscoAtmTrafficExtMIB | This MIB module is an extension to traffic OIDs and variables defined in rfc1695. | ||
| 1.3.6.1.4.1.9.10.11.1 | NodeciscoAtmTrafficExtMIBObjects | |||
| 1.3.6.1.4.1.9.10.11.1.1 | NodeciscoAtmTrafficTypeExt | |||
| 1.3.6.1.4.1.9.10.11.1.1.1 | IdentityatmNoClpNoScrCdvt | deprecated | Specifies peak cell rate for CLP, and cell delay variation tolerance: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CDVT in cell-times P… | |
| 1.3.6.1.4.1.9.10.11.1.1.2 | IdentityatmClpScrMbsCdvt | current | This traffic descriptor is for Peak Cell Rate (PCR), Sustained Cell Rate (SCR), Maximum Burst Size applied to SCR, and Cell Delay Variation Tolerance applied t… | |
| 1.3.6.1.4.1.9.10.11.1.1.3 | IdentityatmNoClpScrMbsCdvt | current | This traffic descriptor is for Peak Cell Rate (PCR), Sustained Cell Rate (SCR), Maximum Burst Size applied to SCR, and Cell Delay Variation Tolerance applied t… | |
| 1.3.6.1.4.1.9.10.11.1.1.4 | IdentityatmNoClpMcr | current | This traffic descriptor is for Peak Cell Rate (PCR) and Minimum Cell Rate (MCR). The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell … | |
| 1.3.6.1.4.1.9.10.11.1.1.5 | IdentityatmNoClpMcrCdvt | current | This traffic descriptor is for Peak Cell Rate (PCR), Minimum Cell Rate (MCR), and Cell Delay Variation Tolerance applied to PCR. The use of the parameter vecto… | |
| 1.3.6.1.4.1.9.10.11.1.2 | NodeciscoAtmTrafficTableExt | |||
| 1.3.6.1.4.1.9.10.11.1.2.1 | TableatmTrafficDescrParamExtTable | not-accessible | current | Provide additional information specifying traffic parameters for a VC/VP. |
| 1.3.6.1.4.1.9.10.11.1.2.1.1 | RowatmTrafficDescrParamExtEntry | not-accessible | current | An entry in the Traffic Parameter Descriptor extension table. |
| 1.3.6.1.4.1.9.10.11.1.2.1.1.1 | ColumnatmTrafficExplicitServCategory | read-create | current | This objects indicates the Service Category specified by the Traffic Descriptor. If it is defined, the setting of this object determines the Service Category u… |
| 1.3.6.1.4.1.9.10.11.1.2.1.1.2 | ColumnatmTrafficDerivedServCategory | read-only | current | |
| 1.3.6.1.4.1.9.10.11.1.2.1.1.3 | ColumnatmTrafficDescriptorName | read-create | current | A human readable string that contains the unique name of this Traffic Descriptor. This object will return a zero-length string if value is not set. |
| 1.3.6.1.4.1.9.10.11.3 | NodeciscoAtmTrafficExtMIBConformance | |||
| 1.3.6.1.4.1.9.10.11.3.1 | NodeciscoAtmTrafficExtMIBCompliances | |||
| 1.3.6.1.4.1.9.10.11.3.1.1 | ComplianceciscoAtmTrafficExtMIBCompliance | deprecated | The compliance statement for the Cisco ATM Traffic Extension MIB. | |
| 1.3.6.1.4.1.9.10.11.3.1.2 | ComplianceciscoAtmTrafficExtMIBComplianceRev1 | current | The compliance statement for the Cisco ATM Traffic Extension MIB. | |
| 1.3.6.1.4.1.9.10.11.3.2 | NodeciscoAtmTrafficExtMIBGroups | |||
| 1.3.6.1.4.1.9.10.11.3.2.1 | GroupciscoAtmTrafficTableExtMIBGroup | current | A collection of objects which provide extensions to the ATM Traffic Parameter Descriptor Table. | |
| 1.3.6.1.4.1.9.10.11.3.2.2 | GroupciscoAtmTrafficNmsGroup | current | A collection of objects which provide additional information for a management system. |