CISCO-BCP-MIB
26 objects
This MIB module describes the Managed Objects for of Bridge Control Protocol (RFC2878). This MIB is influenced by RFC1474.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.275 | IdentityciscoBcpMIB | This MIB module describes the Managed Objects for of Bridge Control Protocol (RFC2878). This MIB is influenced by RFC1474. | ||
| 1.3.6.1.4.1.9.9.275.1 | NodeciscoBcpMIBObjects | |||
| 1.3.6.1.4.1.9.9.275.1.1 | TablebcpOperTable | not-accessible | current | Table containing the status of the local BCP entity that is related to the operation of Bridging Control Protocol. |
| 1.3.6.1.4.1.9.9.275.1.1.1 | RowbcpOperEntry | not-accessible | current | Operational status information for a particular BCP link. For all entries in ifTable with ifType ppp(23), there will be an entry in this table. |
| 1.3.6.1.4.1.9.9.275.1.1.1.1 | ColumnbcpOperStatus | read-only | current | The operational status of the Bridge Control Protocol. The possible values are : open(1) - the BCP link is up and both ends are configured in the compatible ma… |
| 1.3.6.1.4.1.9.9.275.1.2 | TablebcpConfigTable | not-accessible | current | Table containing the configuration information for the local BCP entity that is related to the operation of Bridging over the PPP link. |
| 1.3.6.1.4.1.9.9.275.1.2.1 | RowbcpConfigEntry | not-accessible | current | Bridging Configuration information for a particular BCP link. For all entries in ifTable with ifType ppp(23), there will be an entry in this table. |
| 1.3.6.1.4.1.9.9.275.1.2.1.1 | ColumnbcpConfigBridgeIdControl | read-write | current | The Bridge-Identification configuration option is designed for use when the line is an interface between half bridges connecting virtual or physical LAN segmen… |
| 1.3.6.1.4.1.9.9.275.1.2.1.2 | ColumnbcpConfigBridgeId | read-write | current | The bridge number of the local BCP entity. This value is meaningful only when the local BCP entity has negotiated the BridgeId Configuration option, which mean… |
| 1.3.6.1.4.1.9.9.275.1.2.1.3 | ColumnbcpConfigLineIdControl | read-write | current | The Line-Identification configuration option is designed for use when the line is assigned a LAN segment number. When enabled the local BCP entity initiates a … |
| 1.3.6.1.4.1.9.9.275.1.2.1.4 | ColumnbcpConfigLineId | read-write | current | The LAN segment number of the local BCP entity. This value is meaningful only when the local BCP entity negotiated the LineId Configuration option, which means… |
| 1.3.6.1.4.1.9.9.275.1.2.1.5 | ColumnbcpConfigMacSupport | read-write | current | The Mac-Support configuration option is provided to permit implementations to indicate the sort of traffic they are prepared to receive. When enabled the local… |
| 1.3.6.1.4.1.9.9.275.1.2.1.6 | ColumnbcpConfigMacType | read-write | current | The MAC type that this local BCP entity is prepared to receive and service. This value is meaningful only when the local BCP entity has negotiated the MAC-Supp… |
| 1.3.6.1.4.1.9.9.275.1.2.1.7 | ColumnbcpConfigTinygram | read-write | current | The Tinygram-Compression configuration option permits implementations to indicate support for Tinygram Compression. When enabled the local BCP Entity initiates… |
| 1.3.6.1.4.1.9.9.275.1.2.1.8 | ColumnbcpConfigMacAddressControl | read-write | current | The Mac-Address configuration option enables the implementations to announce its MAC address or have one assigned. When enabled the local BCP Entity initiates … |
| 1.3.6.1.4.1.9.9.275.1.2.1.9 | ColumnbcpConfigMacAddress | read-write | current | This value is meaningful only when the local BCP entity has negotiated the MAC-Address configuration option, which means the value of bcpConfigMacAddressContro… |
| 1.3.6.1.4.1.9.9.275.1.2.1.10 | ColumnbcpConfigSpanTreeControl | read-write | current | The Spanning-Tree-Protocol configuration option enables a bridge to remain compatible with older implementations of BCP. When enabled the local BCP Entity init… |
| 1.3.6.1.4.1.9.9.275.1.2.1.11 | ColumnbcpConfigSpanTree | read-write | current | The desired spanning tree protocol of the local BCP entity. The listing values of the Spanning- Tree Protocol are specified in the most recent RFC1700. This va… |
| 1.3.6.1.4.1.9.9.275.1.2.1.12 | ColumnbcpConfigIeee802dot1qTagged | read-write | current | The IEEE-802-Tagged-Frame configuration option permits the implementation to support for IEEE 802.1q Tagged Frame. When enabled the local BCP Entity initiates … |
| 1.3.6.1.4.1.9.9.275.1.2.1.13 | ColumnbcpConfigMgmtInline | read-write | current | The Management-Inline configuration option indicates that the system is willing to receive any IEEE-defined inter-bridge protocols. When enabled if the local B… |
| 1.3.6.1.4.1.9.9.275.1.2.1.14 | ColumnbcpConfigBCPacketIndicator | read-write | current | The Bridge Control Packet Indicator configuration option permits the implementation to indicate support for Bridge Control Packet Indicator. When enabled the l… |
| 1.3.6.1.4.1.9.9.275.3 | NodecBcpMIBConformance | |||
| 1.3.6.1.4.1.9.9.275.3.1 | NodecBcpMIBCompliances | |||
| 1.3.6.1.4.1.9.9.275.3.1.1 | CompliancecBcpMIBCompliance | current | The compliance statement for entities which implement this Cisco BCP MIB. | |
| 1.3.6.1.4.1.9.9.275.3.2 | NodecBcpMIBGroups | |||
| 1.3.6.1.4.1.9.9.275.3.2.1 | GroupcBcpMIBGroup | current | A collection of objects providing the configuration and operating status of the BCP entity. |