CISCO-CALLHOME-MIB
275 objects
The MIB module for the management of Call Home feature within the framework of Cisco's Call Home architecture. Customers deploying solutions to run mission critical applications such as storage solutions demand very high availability and Serviceability from their products and/or support partners. To meet these requirements, a feature called 'Call Home' is provided which allows the system experiencing Hardware/Software problems to automatically send the relevant failure information back to the Support Center at the Support Partners for troubleshooting or to get replacement hardware dispatched. This feature also provides advanced features that allow storage systems to send performance, accounting and system health information in addition to just the fault information.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-SYSLOG-MIB | SyslogSeverity |
| CISCO-TC | CiscoURLString CiscoVrfName EntPhysicalIndexOrZero |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Counter32 Counter64 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.300 | IdentityciscoCallHomeMIB | The MIB module for the management of Call Home feature within the framework of Cisco's Call Home architecture. Customers deploying solutions to run mission cri… | ||
| 1.3.6.1.4.1.9.9.300.0 | NodeccmCallHomeNotifications | |||
| 1.3.6.1.4.1.9.9.300.0.1 | NotificationccmSmtpServerFailNotif | current | A ccmSmtpServerFailNotif is sent if the device fails on sending an e-mail notification through an SMTP server in ccmSmtpServersTable. For each SMTP server, an … | |
| 1.3.6.1.4.1.9.9.300.0.2 | NotificationccmAlertGroupTypeAddedNotif | current | A ccmAlertGroupTypeAddedNotif is sent, when a new entry corresponds to the 'callHomeAlertGroupName' object in this notification is added into the callHomeAlert… | |
| 1.3.6.1.4.1.9.9.300.0.3 | NotificationccmAlertGroupTypeDeletedNotif | current | A ccmAlertGroupTypeAddedNotif is sent, when an entry corresponds to 'callHomeAlertGroupName' object in this notification is deleted from the callHomeAlertGroup… | |
| 1.3.6.1.4.1.9.9.300.0.4 | NotificationccmSmtpMsgSendFailNotif | current | A ccmSmtpMsgSendFailNotif is generated if the device fails to send an e-mail notification through all of the SMTP servers in ccmSmtpServersTable. | |
| 1.3.6.1.4.1.9.9.300.0.5 | NotificationccmEventNotif | current | This notification is generated every time a Call Home external event is triggered in the system. Internal events like Periodic Configuration and Inventory even… | |
| 1.3.6.1.4.1.9.9.300.1 | NodeciscoCallHomeMIBObjects | |||
| 1.3.6.1.4.1.9.9.300.1.1 | NodeccmCallHomeConfiguration | |||
| 1.3.6.1.4.1.9.9.300.1.1.1 | ScalarcallHomeEnable | read-write | current | This object enables/disables the Call Home infrastructure on the local device. |
| 1.3.6.1.4.1.9.9.300.1.1.2 | ScalarsysContactPhoneNumber | read-write | current | The phone number of the contact person for this managed node. The phone number must start with '+' and contains only numeric characters except for space and '-… |
| 1.3.6.1.4.1.9.9.300.1.1.3 | ScalarsysContactEmailAddress | read-write | current | The email address of the contact person for this managed node. The format of this object is an e-mail address which conforms to RFC822 and RFC1123 'addr-spec' … |
| 1.3.6.1.4.1.9.9.300.1.1.4 | ScalarsysStreetAddress | read-write | current | The mailing address of this managed node. |
| 1.3.6.1.4.1.9.9.300.1.1.5 | ScalarcallHomeCustomerId | read-write | current | A string, in whatever format is appropriate, to identify the customer. |
| 1.3.6.1.4.1.9.9.300.1.1.6 | ScalarcallHomeContractId | read-write | current | A string, in whatever format is appropriate, to identify the support contract between the customer and support partner. |
| 1.3.6.1.4.1.9.9.300.1.1.7 | ScalarcallHomeSiteId | read-write | current | A location identifier of this device. |
| 1.3.6.1.4.1.9.9.300.1.1.8 | ScalarcallHomeDeviceServicePriority | read-write | current | The service priority of the device. This determines how fast the device has to be serviced. |
| 1.3.6.1.4.1.9.9.300.1.1.9 | ScalarcallHomeAlertAction | read-write | current | This object acts as a trigger by which the generation of a particular type of alert can be verified. Specifically, setting this object to a type of alert trigg… |
| 1.3.6.1.4.1.9.9.300.1.1.10 | ScalarcallHomeAlertActionStatus | read-only | current | This object provides the status of the last Call Home action invocation. unknown (1) - unknown successful (2) - successful inprogress (3) - action in progress … |
| 1.3.6.1.4.1.9.9.300.1.1.11 | ScalarcallHomeAlertActionFailureCause | read-only | current | This object provides the failure cause for the last Call Home test invocation. Note that this object is valid only if value of callHomeAlertActionStatus is 'fa… |
| 1.3.6.1.4.1.9.9.300.1.1.12 | TablecallHomeDestProfileTable | not-accessible | current | This table contains destination profiles. The Call Home feature requires the destination profiles to be setup to be able to send the Call Home messages to dest… |
| 1.3.6.1.4.1.9.9.300.1.1.12.1 | RowcallHomeDestProfileEntry | not-accessible | current | An entry containing information about a Call Home destination. |
| 1.3.6.1.4.1.9.9.300.1.1.12.1.1 | ColumncallHomeDestProfileName | not-accessible | current | Name of the destination profile. |
| 1.3.6.1.4.1.9.9.300.1.1.12.1.2 | ColumncallHomeDestProfileMsgFormat | read-create | current | The Call Home format used with profile while sending the message. |
| 1.3.6.1.4.1.9.9.300.1.1.12.1.3 | ColumncallHomeDestProfileMaxMsgSize | read-create | current | Maximum message size that can be sent to destination pointed to by this destination profile. Implementations are allowed to assign default value. A value of 0 … |
| 1.3.6.1.4.1.9.9.300.1.1.12.1.4 | ColumncallHomeDestProfileTrnsprtMthd | read-create | current | Call Home transport method used to deliver the alert messages. |
| 1.3.6.1.4.1.9.9.300.1.1.12.1.5 | ColumncallHomeDestProfileStatus | read-create | current | Status of this row. |
| 1.3.6.1.4.1.9.9.300.1.1.12.1.6 | ColumncallHomeDestProfileMsgLevel | read-create | current | This object contains the threshold level, used for filtering alert messages sent to a destination. Call Home alert message with severity level lower than the c… |
| 1.3.6.1.4.1.9.9.300.1.1.12.1.7 | ColumncallHomeDestProfileAlertGroups | read-create | current | This object represent the list of configured alert groups for this destination profile. User can modify the configured alert groups, by Setting/Resetting the a… |
| 1.3.6.1.4.1.9.9.300.1.1.12.1.8 | ColumncallHomeDestProfileActive | read-create | current | The object specifies whether the profile is active. A value of 'true' indicates that the profile is active. A value of 'false' indicates that the profile is no… |
| 1.3.6.1.4.1.9.9.300.1.1.12.1.9 | ColumncallHomeDestProfileHiMaxMsgSize | read-create | current | Maximum size of the message that can be sent to destination pointed to by this destination profile. A value of zero for this object indicates that there is no … |
| 1.3.6.1.4.1.9.9.300.1.1.13 | ScalarcallHomeEmailAddrTblMaxEntries | read-only | current | The maximum number of entries that the agent supports in the callHomeDestEmailAddressTable. A value of zero indicates no limitation on the number of entries in… |
| 1.3.6.1.4.1.9.9.300.1.1.14 | TablecallHomeDestEmailAddressTable | not-accessible | current | This table contains email addresses and HTTP URLs for the destination profiles. |
| 1.3.6.1.4.1.9.9.300.1.1.14.1 | RowcallHomeDestEmailAddressEntry | not-accessible | current | An entry containing information about a Call Home destination email address or a destination HTTP URL. |
| 1.3.6.1.4.1.9.9.300.1.1.14.1.1 | ColumncallHomeDestEmailAddressIndex | not-accessible | current | An arbitrary integer value, greater than zero, and less than and equal to callHomeEmailAddrTblMaxEntries, which identifies an Email address. The object can be … |
| 1.3.6.1.4.1.9.9.300.1.1.14.1.2 | ColumncallHomeDestEmailAddress | read-create | current | The email address associated this destination profile. The format of this object is an e-mail address which conforms to RFC822 and RFC1123 'addr-spec' syntax. … |
| 1.3.6.1.4.1.9.9.300.1.1.14.1.3 | ColumncallHomeDestEmailAddressStatus | read-create | current | Status of this row. |
| 1.3.6.1.4.1.9.9.300.1.1.14.1.4 | ColumncallHomeDestType | read-create | current | The type of this destination address. email - This destination address is an email address. Object callHomeDestHttpUrl is irrelevant and can not be set. http -… |
| 1.3.6.1.4.1.9.9.300.1.1.14.1.5 | ColumncallHomeDestHttpUrl | read-create | current | The HTTP URL associated with this destination profile. This object may not be modified while the value of the corresponding instance of callHomeDestEmailAddres… |
| 1.3.6.1.4.1.9.9.300.1.1.15 | ScalarcallHomeEmailFrom | read-write | current | The email address that is to be used in the 'From' field when sending the email using SMTP. The format of this object is an e-mail address which conforms to RF… |
| 1.3.6.1.4.1.9.9.300.1.1.16 | ScalarcallHomeEmailReplyTo | read-write | current | The email address that is to be used in the 'Reply-To' field when sending the email using SMTP. The format of this object is an e-mail address which conforms t… |
| 1.3.6.1.4.1.9.9.300.1.1.17 | ScalarcallHomeEmailMsgDispNotification | read-write | current | The email address to which the Message Disposition Notification (also called 'Return Receipt') sent when the email sent from this device is read by the receive… |
| 1.3.6.1.4.1.9.9.300.1.1.18 | ScalarcallHomeSmtpServerAddrType | read-write | current | Address Type of the SMTP server. |
| 1.3.6.1.4.1.9.9.300.1.1.19 | ScalarcallHomeSmtpServerAddr | read-write | current | Address of the SMTP server. |
| 1.3.6.1.4.1.9.9.300.1.1.20 | ScalarcallHomeSmtpServerPort | read-write | current | Port of the SMTP server. |
| 1.3.6.1.4.1.9.9.300.1.1.21 | ScalarccmSmtpServersTblMaxEntries | read-only | current | Indicates the maximum number of SMTP servers supported by this device. A value of zero indicates no limitation on the number of SMTP servers. |
| 1.3.6.1.4.1.9.9.300.1.1.22 | TableccmSmtpServersTable | not-accessible | current | This table contains a list of SMTP servers that may be used to send out Call Home e-mail messages. An entry is created and deleted by using ccmSmtpServersStatu… |
| 1.3.6.1.4.1.9.9.300.1.1.22.1 | RowccmSmtpServersEntry | not-accessible | current | An entry containing information about an SMTP server. |
| 1.3.6.1.4.1.9.9.300.1.1.22.1.1 | ColumnccmSmtpServersAddrType | not-accessible | current | Address Type of the SMTP server. |
| 1.3.6.1.4.1.9.9.300.1.1.22.1.2 | ColumnccmSmtpServersAddr | not-accessible | current | Address of the SMTP server. |
| 1.3.6.1.4.1.9.9.300.1.1.22.1.3 | ColumnccmSmtpServersPort | read-create | current | Port of the SMTP server. |
| 1.3.6.1.4.1.9.9.300.1.1.22.1.4 | ColumnccmSmtpServersStatus | read-create | current | The status object used to manage the rows in this table. Objects in this conceptual row may not be modified while the value of this object is 'active'. |
| 1.3.6.1.4.1.9.9.300.1.1.22.1.5 | ColumnccmSmtpServersPriority | read-create | current | The priority of this entry relative to other entries. System will attempt to contact SMTP servers in the order of their priority values. For servers with diffe… |
| 1.3.6.1.4.1.9.9.300.1.1.22.1.6 | ColumnccmSmtpServersUseVrf | read-create | current | The Virtual Routing and Forwarding (VRF) domain configured for this SMTP server. A zero length string indicates that there is no VRF domain configured and the … |
| 1.3.6.1.4.1.9.9.300.1.1.23 | ScalarccmSysLogSeverity | read-write | current | Different devices implementing this mib may use different criteria for issuing Call Home alerts. For the devices that issue Call Home alerts based on severity … |
| 1.3.6.1.4.1.9.9.300.1.1.24 | ScalarccmEnableSmtpServerNotif | read-write | current | This variable indicates whether the system produces the ccmSmtpServerFailNotif. A false value for this object will prevent ccmSmtpServerFailNotif notification … |
| 1.3.6.1.4.1.9.9.300.1.1.25 | TablecallHomeAlertGroupTypeTable | not-accessible | current | This table contains information about all the alert groups types supported in the system. An entry is created if a new alert group becomes available in the sys… |
| 1.3.6.1.4.1.9.9.300.1.1.25.1 | RowcallHomeAlertGroupTypeEntry | not-accessible | current | An entry containing information about a particular Call Home alert group type in the system. |
| 1.3.6.1.4.1.9.9.300.1.1.25.1.1 | ColumncallHomeAlertGroupTypeIndex | not-accessible | current | This object represents the index corresponding to the particular alert group type configured in the system. |
| 1.3.6.1.4.1.9.9.300.1.1.25.1.2 | ColumncallHomeAlertGroupName | read-only | current | This object represents the name of alert group configured in the system. |
| 1.3.6.1.4.1.9.9.300.1.1.25.1.3 | ColumncallHomeAlertGroupEnable | read-write | current | This object enables or disables the alert group for the system. A value of 'true' for this object enables and a value of 'false' for this object disables the a… |
| 1.3.6.1.4.1.9.9.300.1.1.25.1.4 | ColumncallHomeAlertGroupCapability | read-only | current | This object indicates the method used by alert group to generate Call Home messages. callHomeMessageSeverity - Call Home alert is generated based only on the l… |
| 1.3.6.1.4.1.9.9.300.1.1.26 | TablecallHomeSwInventoryTable | not-accessible | current | This table contains inventory information about all the software services currently enabled in the system. When a software service is disabled from the system,… |
| 1.3.6.1.4.1.9.9.300.1.1.26.1 | RowcallHomeSwInventoryEntry | not-accessible | current | An entry containing information about the name value pair for a particular software service enabled in the system. |
| 1.3.6.1.4.1.9.9.300.1.1.26.1.1 | ColumncallHomeSwServiceName | not-accessible | current | This object represents the name of software service enabled in the system. |
| 1.3.6.1.4.1.9.9.300.1.1.26.1.2 | ColumncallHomeInventoryNVPairIndex | not-accessible | current | This object represents the index corresponds to the name value pair for a particular software service enabled in the system. The name value pair is a 'tuple' o… |
| 1.3.6.1.4.1.9.9.300.1.1.26.1.3 | ColumncallHomeInventoryInfoName | read-only | current | This object represents the name of a feature , for a particular software service enabled in the system. For example, the value of this object could be 'number … |
| 1.3.6.1.4.1.9.9.300.1.1.26.1.4 | ColumncallHomeInventoryInfoValue | read-only | current | This object represents the value for the feature name specified in the corresponding instance of 'callHomeInventroyInfoName' object. For example, the value of … |
| 1.3.6.1.4.1.9.9.300.1.1.27 | ScalarccmPeriodicSwInventoryMsgEnable | read-write | current | This object enables/disables the sending of periodic software inventory Call Home message on the system. |
| 1.3.6.1.4.1.9.9.300.1.1.28 | ScalarccmPeriodicSwInventoryTimeFrame | read-write | current | This object represents the time frame for sending the periodic software inventory Call Home message, if the periodic software inventory is enabled on the syste… |
| 1.3.6.1.4.1.9.9.300.1.1.29 | ScalarccmMsgThrottlingEnable | read-write | current | This object enables/disables the message throttling mechanism implemented on the system. The message throttling mechanism limits the number of Call Home messag… |
| 1.3.6.1.4.1.9.9.300.1.1.30 | NodeccmCallHomeAlertGroupCfg | |||
| 1.3.6.1.4.1.9.9.300.1.1.30.1 | TableccmSeverityAlertGroupTable | not-accessible | current | A list of severity type alert groups which are currently configured for each of the profiles in the device. An entry is created if a configured alert group who… |
| 1.3.6.1.4.1.9.9.300.1.1.30.1.1 | RowccmSeverityAlertGroupEntry | not-accessible | current | An entry containing severity configuration information for a particular alert group in a profile. |
| 1.3.6.1.4.1.9.9.300.1.1.30.1.1.1 | ColumnccmAlertGroupSeverity | read-write | current | This object specifies the minimum severity level, associated with alert group for a destination profile. Call Home alert messages for this alert group with sev… |
| 1.3.6.1.4.1.9.9.300.1.1.30.2 | TableccmPeriodicAlertGroupTable | not-accessible | current | A list of periodic type alert groups which are currently configured in the device. An entry is created if a configured alert group whose callHomeAlertGroupCapa… |
| 1.3.6.1.4.1.9.9.300.1.1.30.2.1 | RowccmPeriodicAlertGroupEntry | not-accessible | current | An entry containing periodic configuration information for a particular alert group in a profile. |
| 1.3.6.1.4.1.9.9.300.1.1.30.2.1.1 | ColumnccmPeriodicAlertGroupInterval | read-write | current | This object specifies the type of periodic configuration for this alert group. This object is only instantiated when the value of corresponding instance of ccm… |
| 1.3.6.1.4.1.9.9.300.1.1.30.2.1.2 | ColumnccmPeriodicAlertGroupDayOfWeek | read-write | current | This object specifies the day of the week on which user wishes to receive periodic Call Home alert messages for this entry. This object is only instantiated wh… |
| 1.3.6.1.4.1.9.9.300.1.1.30.2.1.3 | ColumnccmPeriodicAlertGroupDayOfMonth | read-write | current | This object specifies the day of the month on which user wishes to receive periodic Call Home alert messages for this entry. If the day specified is beyond the… |
| 1.3.6.1.4.1.9.9.300.1.1.30.2.1.4 | ColumnccmPeriodicAlertGroupHour | read-write | current | This object specifies the hours component of time (24 hour format) at which the daily/weekly/monthly periodic Call Home alert messages will be generated for th… |
| 1.3.6.1.4.1.9.9.300.1.1.30.2.1.5 | ColumnccmPeriodicAlertGroupMinute | read-write | current | This object specifies the minutes component of time at which the hourly/daily/weekly/monthly periodic Call Home alert messages will be generated for this entry… |
| 1.3.6.1.4.1.9.9.300.1.1.30.2.1.6 | ColumnccmPeriodicAlertGroupEnable | read-write | current | This object specifies whether sending Call Home messages periodically is enabled. |
| 1.3.6.1.4.1.9.9.300.1.1.30.2.1.7 | ColumnccmPeriodicAlertGroupIntervalMinutes | read-write | current | This object specifies the number of minutes after which periodic message will be generated for this entry. This object is only instantiated for the alert group… |
| 1.3.6.1.4.1.9.9.300.1.1.30.3 | ScalarccmMaxSyslogAlertGroupPatterns | read-only | current | The object dictates the maximum number of entries in the ccmPatternAlertGroupTable which may be created with same value for index callHomeDestProfileName. A va… |
| 1.3.6.1.4.1.9.9.300.1.1.30.4 | TableccmPatternAlertGroupTable | not-accessible | current | A list of pattern used by the pattern type alert groups which are currently configured in the device. An entry is created if a configured alert group whose cal… |
| 1.3.6.1.4.1.9.9.300.1.1.30.4.1 | RowccmPatternAlertGroupEntry | not-accessible | current | An entry containing properties for a pattern which is used to match against system syslog messages. |
| 1.3.6.1.4.1.9.9.300.1.1.30.4.1.1 | ColumnccmAlertGroupPattern | not-accessible | current | The object contains a regular expression. Regular Expressions: A regular expression is a pattern (a phrase, number, or more complex pattern): Regular expressio… |
| 1.3.6.1.4.1.9.9.300.1.1.30.4.1.2 | ColumnccmPatternAlertGroupSeverity | read-create | current | This object specifies the severity level, used for filtering Call Home messages in conjunction with ccmAlertGroupPattern to be issued to destinations associate… |
| 1.3.6.1.4.1.9.9.300.1.1.30.4.1.3 | ColumnccmPatternAlertGroupStorage | read-create | current | The storage type for this conceptual row. |
| 1.3.6.1.4.1.9.9.300.1.1.30.4.1.4 | ColumnccmPatternAlertGroupStatus | read-create | current | Object to manage creation and deletion of rows in this table. |
| 1.3.6.1.4.1.9.9.300.1.1.30.5 | ScalarcallHomeUserDefMaxCmds | read-only | current | The maximum number of CLI commands that the system supports in the callHomeUserDefCmdTable for a particular alert group type represented by the callHomeAlertGr… |
| 1.3.6.1.4.1.9.9.300.1.1.30.6 | TablecallHomeUserDefCmdTable | not-accessible | current | Call Home alert messages are sent with output of some pre-defined commands run in the system. This table provides an option for the user to specify a CLI(Comma… |
| 1.3.6.1.4.1.9.9.300.1.1.30.6.1 | RowcallHomeUserDefCmdEntry | not-accessible | current | An entry containing information about a user specified CLI command for a Call Home alert group type in the system. The index object 'callHomeAlertGroupTypeInde… |
| 1.3.6.1.4.1.9.9.300.1.1.30.6.1.1 | ColumncallHomeUserDefCmdIndex | not-accessible | current | An arbitrary integer identifying the user specified CLI command for a particular callHomeAlertGroupTypeIndex. |
| 1.3.6.1.4.1.9.9.300.1.1.30.6.1.2 | ColumncallHomeUserDefCmdName | read-create | current | This object represents a CLI command to be executed and whose output should be sent with the Call Home alert message. The implementation of this object does no… |
| 1.3.6.1.4.1.9.9.300.1.1.30.6.1.3 | ColumncallHomeUserDefCmdRowStatus | read-create | current | Status of this row. |
| 1.3.6.1.4.1.9.9.300.1.1.30.7 | TableccmEventAlertGroupTable | not-accessible | current | A list of event type alerts groups which are currently configured in the device. An entry is created if a configured alert group whose callHomeAlertGroupCapabi… |
| 1.3.6.1.4.1.9.9.300.1.1.30.7.1 | RowccmEventAlertGroupEntry | not-accessible | current | An entry containing configuration information about the 'event' alert group configured for a profile. |
| 1.3.6.1.4.1.9.9.300.1.1.30.7.1.1 | ColumnccmEventAlertGroupEnable | read-write | current | This object specifies whether sending Call Home messages based on alert group event is enabled. |
| 1.3.6.1.4.1.9.9.300.1.1.30.7.1.2 | ColumnccmEventAlertGroupOperSeverity | read-only | current | This object indicates the severity level used in the Call Home messages. |
| 1.3.6.1.4.1.9.9.300.1.1.31 | NodeccmCallHomeProfileTestControl | |||
| 1.3.6.1.4.1.9.9.300.1.1.31.1 | TableccmDestProfileTestTable | not-accessible | current | This table lists status information about the profiles configured on this device. An entry will be created in this table, for each destination profile configur… |
| 1.3.6.1.4.1.9.9.300.1.1.31.1.1 | RowccmDestProfileTestEntry | not-accessible | current | An entry containing control and status information pertaining to test on a destination profile. |
| 1.3.6.1.4.1.9.9.300.1.1.31.1.1.1 | ColumnccmDestProfileTestTrigger | read-write | current | This object acts as a trigger by which the generation of test message for a profile can be triggered. Setting this object to 'true' will cause system to genera… |
| 1.3.6.1.4.1.9.9.300.1.1.31.1.1.2 | ColumnccmDestProfileTestMessage | read-write | current | This object specifies the content of the message used for the test operation. If this object contains zero-length string, a default test message will be used. |
| 1.3.6.1.4.1.9.9.300.1.1.31.1.1.3 | ColumnccmDestProfileTestStatus | read-only | current | This object provides the status of the last test triggered for this destination profile. unknown (1) - unknown successful (2) - successful inprogress (3) - act… |
| 1.3.6.1.4.1.9.9.300.1.1.31.1.1.4 | ColumnccmDestProfileTestFailureCause | read-only | current | This object provides the failure cause for the last test performed on this profile. Note that this object is valid only if value of ccmDestProfileTestStatus is… |
| 1.3.6.1.4.1.9.9.300.1.1.32 | NodeccmCallHomeNotifConfig | |||
| 1.3.6.1.4.1.9.9.300.1.1.32.1 | ScalarccmSmtpMsgSendFailNotifEnable | read-write | current | This variable controls generation of ccmSmtpMsgSendFailNotif. A value of 'true' for this object will enable ccmSmtpMsgSendFailNotif notification on the system.… |
| 1.3.6.1.4.1.9.9.300.1.1.33 | NodeccmPeriodicSwInventoryCfg | |||
| 1.3.6.1.4.1.9.9.300.1.1.33.1 | ScalarccmPeriodicSwInventoryTimeOfDay | read-write | current | This object represents the time of day for sending the periodic software inventory Call Home message, if the periodic software inventory is enabled on the syst… |
| 1.3.6.1.4.1.9.9.300.1.1.34 | ScalarccmAlertRateLimit | read-write | current | The rate-limit, in alerts per minute, of call home alerts generated by the system. Upon exceeding the rate, the alert is dropped. |
| 1.3.6.1.4.1.9.9.300.1.1.35 | ScalarccmHttpProxyServerAddrType | read-write | current | This object specifies the type of the HTTP proxy server as represented by the value 'ccmHttpProxyServerAddr'. |
| 1.3.6.1.4.1.9.9.300.1.1.36 | ScalarccmHttpProxyServerAddr | read-write | current | This object specifies the address of the HTTP proxy server. The type of this address is indicated by the value of 'ccmHttpProxyServerAddrType'. |
| 1.3.6.1.4.1.9.9.300.1.1.37 | ScalarccmHttpProxyServerPort | read-write | current | This object specifies the port of the HTTP proxy server. |
| 1.3.6.1.4.1.9.9.300.1.1.38 | ScalarccmHttpProxyServerUseEnable | read-write | current | This object enables/disables the use of HTTP proxy server configured for sending callhome messages over HTTP. A value of 'true' specifies that proxy server wil… |
| 1.3.6.1.4.1.9.9.300.1.1.39 | ScalarcallHomeSmtpServerUseVrf | read-write | current | The Virtual Routing and Forwarding (VRF) domain configured for this SMTP server. A zero length string indicates that there is no VRF domain configured and the … |
| 1.3.6.1.4.1.9.9.300.1.1.40 | ScalarccmHttpTransportUseVrf | read-write | current | The Virtual Routing and Forwarding (VRF) domain configured for HTTP transport in Call Home. A zero length string indicates that there is no VRF domain configur… |
| 1.3.6.1.4.1.9.9.300.1.1.41 | ScalarcallHomeDataPrivacy | read-write | current | The objects specifies the privacy level of Call Home messages. |
| 1.3.6.1.4.1.9.9.300.1.2 | NodeccmCallHomeStats | |||
| 1.3.6.1.4.1.9.9.300.1.2.1 | ScalarcallHomeLastAlertSent | read-only | current | The value of sysUpTime when the last Call Home alert was sent. |
| 1.3.6.1.4.1.9.9.300.1.2.2 | ScalarcallHomeAlerts | read-only | current | The number of Call Home alerts sent. |
| 1.3.6.1.4.1.9.9.300.1.2.3 | ScalarcallHomeHCAlerts | read-only | current | The number of Call Home alerts sent. This object is a 64-bit version of callHomeAlerts |
| 1.3.6.1.4.1.9.9.300.1.2.4 | ScalarccmAlertsDropped | read-only | current | The number of Call Home alerts dropped due to rate limiting configured through ccmAlertRateLimit. |
| 1.3.6.1.4.1.9.9.300.1.2.5 | TableccmEventStatsTable | not-accessible | current | This table contains a list of Call Home message type for each Call Home event. An entry will exist for each call-home message type which supports Call Home eve… |
| 1.3.6.1.4.1.9.9.300.1.2.5.1 | RowccmEventStatsEntry | not-accessible | current | An entry containing Call Home event statistics for a particular Call Home message type. |
| 1.3.6.1.4.1.9.9.300.1.2.5.1.1 | ColumnccmEventStatsTypeIndex | not-accessible | current | This object indicates the type of Call Home event. 'successful' - Call Home messages were generated successfully for corresponding Call Home event. 'inQueue' -… |
| 1.3.6.1.4.1.9.9.300.1.2.5.1.2 | ColumnccmEventStatsMsgTypeIndex | not-accessible | current | This object indicates the type of Call Home message. 'total' - statistics based on all the message types. 'email' - statistics for Call Home messages which use… |
| 1.3.6.1.4.1.9.9.300.1.2.5.1.3 | ColumnccmEventStatsTotal | read-only | current | Total number of Call Home events. |
| 1.3.6.1.4.1.9.9.300.1.2.5.1.4 | ColumnccmEventStatsConfiguration | read-only | current | The number of Configuration Call Home events. |
| 1.3.6.1.4.1.9.9.300.1.2.5.1.5 | ColumnccmEventStatsDiagnostic | read-only | current | The number of Diagnostic Call Home events. |
| 1.3.6.1.4.1.9.9.300.1.2.5.1.6 | ColumnccmEventStatsEnvironment | read-only | current | The number of Environment Call Home events. |
| 1.3.6.1.4.1.9.9.300.1.2.5.1.7 | ColumnccmEventStatsInventory | read-only | current | The number of Inventory Call Home events. |
| 1.3.6.1.4.1.9.9.300.1.2.5.1.8 | ColumnccmEventStatsSystemLog | read-only | current | The number of System Log Call Home events. |
| 1.3.6.1.4.1.9.9.300.1.2.5.1.9 | ColumnccmEventStatsTest | read-only | current | The number of Test Call Home events. |
| 1.3.6.1.4.1.9.9.300.1.2.5.1.10 | ColumnccmEventStatsRequest | read-only | current | The number of Request Call Home events. |
| 1.3.6.1.4.1.9.9.300.1.2.5.1.11 | ColumnccmEventStatsSendCliOutput | read-only | current | The number of Send-CLI-Output Call Home events. |
| 1.3.6.1.4.1.9.9.300.1.3 | NodeccmCallHomeStatus | |||
| 1.3.6.1.4.1.9.9.300.1.3.1 | ScalarccmSmtpServerStatusTimeStamp | read-only | current | This object indicates the time when ccmSmtpServerStatusTable was last updated, either by a SNMP Servers check by ccmSmtpServerStatusInitiate or by a change in … |
| 1.3.6.1.4.1.9.9.300.1.3.2 | ScalarccmSmtpServerStatusInitiate | read-write | current | A control object used to initiate the availability status check of the SMTP Servers configured in ccmSmtpServersTable. Setting this object to 'true' will check… |
| 1.3.6.1.4.1.9.9.300.1.3.3 | ScalarccmSmtpServerStatusResult | read-only | current | This object provides the status of the last SMTP status check initiated by ccmSmtpServerStatusInitiate. Management stations could read value of this object aft… |
| 1.3.6.1.4.1.9.9.300.1.3.4 | TableccmSmtpServerStatusTable | not-accessible | current | A list of SMTP servers. An entry will exist for each SMTP server which is configured in the ccmSmtpServersTable if the value of ccmSmtpServerStatusResult is 's… |
| 1.3.6.1.4.1.9.9.300.1.3.4.1 | RowccmSmtpServerStatusEntry | not-accessible | current | An entry containing availability status of a particular SMTP Server. |
| 1.3.6.1.4.1.9.9.300.1.3.4.1.1 | ColumnccmSmtpServerStatusAvailability | read-only | current | This variable indicates whether the SMTP Server is currently available. |
| 1.3.6.1.4.1.9.9.300.1.3.5 | ScalarccmOnDemandMsgServAvailable | read-only | current | This object indicates whether the system is ready to generate on demand Call Home messages. A value of 'true' indicates that the system is ready to generate on… |
| 1.3.6.1.4.1.9.9.300.1.4 | NodeccmCallHomeOnDemandActions | |||
| 1.3.6.1.4.1.9.9.300.1.4.1 | NodeccmOnDemandMsgSendControl | |||
| 1.3.6.1.4.1.9.9.300.1.4.1.1 | ScalarccmOnDemandMsgSendAlertGroup | read-write | current | The object specifies the alert group for which on demand Call Home message should be generated. Only those alert groups whose corresponding instance of callHom… |
| 1.3.6.1.4.1.9.9.300.1.4.1.2 | ScalarccmOnDemandMsgSendProfile | read-write | current | This object specifies the name of the profile for which the on demand Call Home messages should be generated. A zero length string for this object indicates th… |
| 1.3.6.1.4.1.9.9.300.1.4.1.3 | ScalarccmOnDemandMsgSendEntPhyIndex | read-write | current | This object specifies the value of entPhysicalIndex of the physical entity for which the on demand Call Home messages should be generated. Only those entities … |
| 1.3.6.1.4.1.9.9.300.1.4.1.4 | ScalarccmOnDemandMsgSendTrigger | read-write | current | Object to trigger on demand Call Home messages. Setting the object to 'true' triggers on demand Call Home messages. Setting the object to 'false' has no effect… |
| 1.3.6.1.4.1.9.9.300.1.4.2 | NodeccmOnDemandCliMsgControl | |||
| 1.3.6.1.4.1.9.9.300.1.4.2.1 | ScalarccmOnDemandCliMsgCliList | read-write | current | The object specifies a list of commands that will be executed and the output of which will be part of on demand Call Home message. The list contains one or mor… |
| 1.3.6.1.4.1.9.9.300.1.4.2.2 | ScalarccmOnDemandCliMsgTransport | read-write | current | The object specifies the transport method used to deliver the on demand Call Home messages with CLI output. 'email' delivered via e-mail. 'http' delivered via … |
| 1.3.6.1.4.1.9.9.300.1.4.2.3 | ScalarccmOnDemandCliMsgEmail | read-write | current | The object specifies the e-mail address to which the on demand Call Home message with CLI output will be sent if ccmOnDemandCliMsgTransport is 'email'. The obj… |
| 1.3.6.1.4.1.9.9.300.1.4.2.4 | ScalarccmOnDemandCliMsgFormat | read-write | current | This object specifies the format of the on demand Call Home message with CLI output. |
| 1.3.6.1.4.1.9.9.300.1.4.2.5 | ScalarccmOnDemandCliMsgTacServiceReqId | read-write | current | This object specifies the Service Request Identifier associated with on demand Call Home message with CLI output. |
| 1.3.6.1.4.1.9.9.300.1.4.2.6 | ScalarccmOnDemandCliMsgTrigger | read-write | current | Object to trigger on demand Call Home messages with CLI output. Setting the object to 'true' triggers on demand Call Home messages. Setting the object to 'fals… |
| 1.3.6.1.4.1.9.9.300.1.5 | NodeccmSmartCallHomeActions | |||
| 1.3.6.1.4.1.9.9.300.1.5.1 | ScalarccmSmartCallHomeProfile | read-write | current | This object specifies the name of the profile for which the Smart Call Home messages should be generated. A zero length string for this object indicates that t… |
| 1.3.6.1.4.1.9.9.300.1.5.2 | ScalarccmSmartCallHomeServiceType | read-write | current | The object specifies the type of service requested from Smart Call Home server. 'commandReference' indicates a request for command reference to Smart Call Home… |
| 1.3.6.1.4.1.9.9.300.1.5.3 | ScalarccmSmartCallHomeAnalysisCmd | read-write | current | The object specifies an existing display/show command on the the system. The output of the command will be included in the Call Home message and be processed b… |
| 1.3.6.1.4.1.9.9.300.1.5.4 | ScalarccmSmartCallHomeCcoId | read-write | current | The object specifies registered CCO ID (Cisco Connection Online) ID to which the response to Smart Call Home requests should be directed. Response from Cisco w… |
| 1.3.6.1.4.1.9.9.300.1.5.5 | ScalarccmSmartCallHomeTrigger | read-write | current | Object to trigger Smart Call Home request messages. Setting the object to 'true' triggers Smart Call Home request message. The object can be set to the value o… |
| 1.3.6.1.4.1.9.9.300.1.6 | NodeccmCallHomeVrf | |||
| 1.3.6.1.4.1.9.9.300.1.6.1 | ScalarccmCallHomeVrfName | read-write | current | The name of Virtual Routing and Forwarding (VRF) domain configured for Call Home feature. A zero length string indicates that there is no VRF domain configured… |
| 1.3.6.1.4.1.9.9.300.1.7 | NodeccmCallHomeMessageSource | |||
| 1.3.6.1.4.1.9.9.300.1.7.1 | ScalarccmMsgSourceIpAddrType | read-write | current | The type of Internet address to be used as the source address while generating Call Home messages. Changing the value of this object may change the value of cc… |
| 1.3.6.1.4.1.9.9.300.1.7.2 | ScalarccmMsgSourceIpAddr | read-write | current | The Internet address to be used as the source address while generating Call Home messages. The type of this address is determined by the ccmMessageSourceIpAddr… |
| 1.3.6.1.4.1.9.9.300.1.7.3 | ScalarccmMsgSourceInterface | read-write | current | The interface to be used while generating Call Home messages. A value of zero indicates that a source interface is not specified. Changing the value of this ob… |
| 1.3.6.1.4.1.9.9.300.1.8 | NodeccmCallhomeEvents | |||
| 1.3.6.1.4.1.9.9.300.1.8.1 | ScalarccmEventDescription | accessible-for-notify | current | This object indicates the description of the Call Home event that occurred in the system. |
| 1.3.6.1.4.1.9.9.300.1.8.2 | ScalarccmEventTime | accessible-for-notify | current | This object indicates Time when the last Call Home alert was triggered. |
| 1.3.6.1.4.1.9.9.300.1.8.3 | ScalarccmEventUrgencyLevel | accessible-for-notify | current | This object specifies the minimum urgency level, associated with Call Home event that occurred in the system. |
| 1.3.6.1.4.1.9.9.300.1.9 | NodeccmCallHomeDiagSignature | |||
| 1.3.6.1.4.1.9.9.300.1.9.1 | ScalarccmDiagSignatureActive | read-write | current | The object specifies if the Diagnostic Signature functionality of Call Home is active. Diagnostic signatures allow customers to download Cisco digitally signed… |
| 1.3.6.1.4.1.9.9.300.1.9.2 | ScalarccmDiagSignatureProfileName | read-write | current | This object specifies the profile that will use the Diagnostic Signature functionality. A zero length string for this object indicates that Cisco-TAC profile w… |
| 1.3.6.1.4.1.9.9.300.1.9.3 | TableccmCallHomeDiagSignatureInfoTable | not-accessible | current | A list of Call Home Diagnostic Signatures installed on the device. |
| 1.3.6.1.4.1.9.9.300.1.9.3.1 | RowccmCallHomeDiagSignatureInfoEntry | not-accessible | current | An entry containing management information of a Call Home Diagnostic Signature. |
| 1.3.6.1.4.1.9.9.300.1.9.3.1.1 | ColumnccmCallHomeDiagSignatureName | not-accessible | current | The name of Call Home Diagnostic Signature installed on the device. |
| 1.3.6.1.4.1.9.9.300.1.9.3.1.2 | ColumnccmCallHomeDiagSignatureType | read-only | current | The type of this Call Home Diagnostic Signature. |
| 1.3.6.1.4.1.9.9.300.1.9.3.1.3 | ColumnccmCallHomeDiagSignatureFuncDescr | read-only | current | A user friendly string providing functionality description for this Call Home Diagnostic Signature. |
| 1.3.6.1.4.1.9.9.300.1.9.3.1.4 | ColumnccmCallHomeDiagSignatureRev | read-only | current | The revision information of Call Home Diagnostic Signature. |
| 1.3.6.1.4.1.9.9.300.1.9.3.1.5 | ColumnccmCallHomeDiagSignatureSigner | read-only | current | The entity who signed this Call Home Diagnostic Signature. 'cisco' - Diagnostic Signature has been signed by Cisco. 'partner' - Diagnostic Signature has been s… |
| 1.3.6.1.4.1.9.9.300.1.9.3.1.6 | ColumnccmCallHomeDiagSignatureTriggerCount | read-only | current | The number of times this Call Home Diagnostic Signature has been triggered. |
| 1.3.6.1.4.1.9.9.300.1.9.3.1.7 | ColumnccmCallHomeDiagSignatureAvgRuntime | read-only | current | The average run time of this Call Home Diagnostic Signature. |
| 1.3.6.1.4.1.9.9.300.1.9.3.1.8 | ColumnccmCallHomeDiagSignatureMaxRuntime | read-only | current | The maximum amount of time it took to run this Call Home Diagnostic Signature. |
| 1.3.6.1.4.1.9.9.300.1.10 | NodeccmCallHomeSecurity | |||
| 1.3.6.1.4.1.9.9.300.1.10.1 | ScalarccmCallHomeSecurityLevel | read-write | current | This object specifies the security level for Call Home. normal - running configuration and show CLI output are not changed within Call Home messages. high - sy… |
| 1.3.6.1.4.1.9.9.300.1.11 | NodeccmCallHomeReporting | |||
| 1.3.6.1.4.1.9.9.300.1.11.1 | ScalarccmAnonymousReportingEnable | read-write | current | This object specifies if anonymous reporting functionality is enable for Call Home. A value of 'true' enables the anonymous reporting functionality. |
| 1.3.6.1.4.1.9.9.300.1.12 | NodeccmCallHomeHttpProxy | |||
| 1.3.6.1.4.1.9.9.300.1.13 | NodeccmCallHomeAaa | |||
| 1.3.6.1.4.1.9.9.300.1.13.1 | ScalarccmAaaAuthEnable | read-write | current | The object specifies if the AAA authorization is required when running the CLI commands in Call Home messages. A value of 'true' enables the AAA authorization … |
| 1.3.6.1.4.1.9.9.300.1.13.2 | ScalarccmAaaAuthUserName | read-write | current | The object specifies the user name used by Call Home for AAA authorization. Value of this object should be ignored if ccmAaaAuthEnable is 'false'. |
| 1.3.6.1.4.1.9.9.300.2 | NodechMIBConformance | |||
| 1.3.6.1.4.1.9.9.300.2.1 | NodechMIBCompliances | |||
| 1.3.6.1.4.1.9.9.300.2.1.1 | CompliancechMIBCompliance | read-only | deprecated | The compliance statement for entities which implement the Call Home feature. OBJECT ccmSmtpServersAddrType SYNTAX INTEGER { ipv4(1) } DESCRIPTION An implementa… |
| 1.3.6.1.4.1.9.9.300.2.1.2 | CompliancechMIBCompliance1 | read-only | deprecated | The compliance statement for entities which implement the Call Home feature. OBJECT ccmSmtpServersAddrType SYNTAX INTEGER { ipv4(1) } DESCRIPTION An implementa… |
| 1.3.6.1.4.1.9.9.300.2.1.3 | CompliancechMIBCompliance2 | read-only | deprecated | The compliance statement for entities which implement the Call Home feature. OBJECT ccmSmtpServersAddrType SYNTAX INTEGER { ipv4(1) } DESCRIPTION An implementa… |
| 1.3.6.1.4.1.9.9.300.2.1.4 | CompliancechMIBCompliance3 | read-only | deprecated | The compliance statement for entities which implement the Call Home feature. OBJECT ccmSmtpServersAddrType SYNTAX INTEGER { ipv4(1) } DESCRIPTION An implementa… |
| 1.3.6.1.4.1.9.9.300.2.1.5 | CompliancechMIBCompliance4 | read-only | deprecated | The compliance statement for entities which implement the Call Home feature. OBJECT ccmSmtpServersAddrType SYNTAX INTEGER { ipv4(1) } DESCRIPTION An implementa… |
| 1.3.6.1.4.1.9.9.300.2.1.6 | CompliancechMIBCompliance5 | read-only | deprecated | The compliance statement for entities which implement the Call Home feature. OBJECT ccmSmtpServersAddrType SYNTAX INTEGER { ipv4(1) } DESCRIPTION An implementa… |
| 1.3.6.1.4.1.9.9.300.2.1.7 | CompliancechMIBCompliance6 | read-only | deprecated | The compliance statement for entities which implement the Call Home feature. It is deprecated and superseded by chMIBCompliance7 statement. OBJECT ccmSmtpServe… |
| 1.3.6.1.4.1.9.9.300.2.1.8 | CompliancechMIBCompliance7 | read-only | deprecated | The compliance statement for entities which implement the Call Home feature. OBJECT ccmSmtpServersAddrType SYNTAX INTEGER { ipv4(1) } DESCRIPTION An implementa… |
| 1.3.6.1.4.1.9.9.300.2.1.9 | CompliancechMIBCompliance8 | read-only | deprecated | The compliance statement for entities which implement the Call Home feature. OBJECT ccmSmtpServersAddrType SYNTAX INTEGER { ipv4(1) } DESCRIPTION An implementa… |
| 1.3.6.1.4.1.9.9.300.2.1.10 | CompliancechMIBCompliance9 | read-only | current | The compliance statement for entities which implement the Call Home feature. OBJECT ccmSmtpServersAddrType SYNTAX INTEGER { ipv4(1) } DESCRIPTION An implementa… |
| 1.3.6.1.4.1.9.9.300.2.1.11 | CompliancechMIBCompliance10 | read-only | current | The compliance statement for entities which implement the Call Home feature. OBJECT ccmSmtpServersAddrType SYNTAX INTEGER { ipv4(1) } DESCRIPTION An implementa… |
| 1.3.6.1.4.1.9.9.300.2.2 | NodechMIBGroups | |||
| 1.3.6.1.4.1.9.9.300.2.2.1 | GroupchSystemInformationGroup | deprecated | A collection of objects for displaying and configuring system information pertaining to Call Home. | |
| 1.3.6.1.4.1.9.9.300.2.2.2 | GroupchConfigurationGroup | deprecated | A collection of objects for displaying and configuring Call Home parameters. | |
| 1.3.6.1.4.1.9.9.300.2.2.3 | GroupchEmailMsgDispGroup | current | A collection of object(s) for displaying and configuring e-mail address to which the e-mail disposition notification should be sent. | |
| 1.3.6.1.4.1.9.9.300.2.2.4 | GroupchSingleSmtpServerGroup | deprecated | A collection of objects for displaying and configuring Call Home SMTP server on the devices which support only one SMTP server. | |
| 1.3.6.1.4.1.9.9.300.2.2.5 | GroupchMultipleSmtpServersGroup | current | A collection of objects for displaying and configuring Call Home SMTP server on the devices which support on one SMTP server. | |
| 1.3.6.1.4.1.9.9.300.2.2.6 | GroupchStatisticsGroup | current | A collection of objects for displaying Call Home statistics. | |
| 1.3.6.1.4.1.9.9.300.2.2.7 | GroupccmSysLogSeverityGroup | current | A collection of object(s) for displaying and configuring Call Home syslog severity based on which Call Home alerts may be issued. | |
| 1.3.6.1.4.1.9.9.300.2.2.8 | GroupccmMIBNotificationsConfigGroup | current | A collection of objects for displaying and configuring Call Home notifications. | |
| 1.3.6.1.4.1.9.9.300.2.2.9 | GroupccmMIBNotificationsGroup | deprecated | A collection of notifications. | |
| 1.3.6.1.4.1.9.9.300.2.2.10 | GroupchConfigurationGroup1 | deprecated | A collection of objects for displaying and configuring Call Home parameters. | |
| 1.3.6.1.4.1.9.9.300.2.2.11 | GroupccmMIBNotificationsGroup1 | current | A collection of notifications. | |
| 1.3.6.1.4.1.9.9.300.2.2.12 | GroupchConfigurationGroup2 | deprecated | A collection of objects for displaying and configuring Call Home parameters. | |
| 1.3.6.1.4.1.9.9.300.2.2.13 | GroupchSwInventoryInfoGroup | deprecated | A collection of objects for displaying and configuring software inventory information. | |
| 1.3.6.1.4.1.9.9.300.2.2.14 | GroupchPeriodicSwInventoryInfoGroup | current | A collection of objects for configuring periodic software inventory information. | |
| 1.3.6.1.4.1.9.9.300.2.2.15 | GroupchSwInventoryInfoGroup1 | current | A collection of objects for displaying software inventory information. | |
| 1.3.6.1.4.1.9.9.300.2.2.16 | GroupccmUserDefCmdGroup | current | A collection of objects for configuring user defined commands for the Call Home alert group types. | |
| 1.3.6.1.4.1.9.9.300.2.2.17 | GroupccmPeriodicSwInventoryInfoGroup1 | current | A collection of objects for configuring the additional information of periodic software inventory information. | |
| 1.3.6.1.4.1.9.9.300.2.2.18 | GroupccmConfigurationGroup3 | current | A collection of objects for displaying and configuring Call Home parameters. | |
| 1.3.6.1.4.1.9.9.300.2.2.19 | GroupccmAlertActionGroup | current | A collection of objects providing control and status information for Call Home alert actions. | |
| 1.3.6.1.4.1.9.9.300.2.2.20 | GroupccmProfileMessageLevelGroup | current | A collection of objects providing control over message filtering level for Call Home messages. | |
| 1.3.6.1.4.1.9.9.300.2.2.21 | GroupccmProfileActivationGroup | current | A collection of objects providing control over activating and deactivating configured Call Home profiles. | |
| 1.3.6.1.4.1.9.9.300.2.2.22 | GroupccmProfileTestGroup | current | A collection of objects providing control over generation of test alert messages for a profile. | |
| 1.3.6.1.4.1.9.9.300.2.2.23 | GroupccmProfileAlertGroupsGroup | current | A collection of objects that provide names to identify alert-groups supported by the system and ability to associate them with various profiles. | |
| 1.3.6.1.4.1.9.9.300.2.2.24 | GroupccmProfileAlertGroupControlGroup | current | A collection of objects providing control over enabling and disabling various alert-groups supported by the system. | |
| 1.3.6.1.4.1.9.9.300.2.2.25 | GroupccmThrottleConfigurationGroup | current | A collection of objects for controlling Call Home message throttling functionality. | |
| 1.3.6.1.4.1.9.9.300.2.2.26 | GroupccmSmtpServersPriorityGroup | current | A collection of object(s) providing priority related information for Call Home SMTP servers. | |
| 1.3.6.1.4.1.9.9.300.2.2.27 | GroupccmAlertGroupCapabilityGroup | current | A collection of object(s) providing information about criteria used by system to issue message for the corresponding alert group. | |
| 1.3.6.1.4.1.9.9.300.2.2.28 | GroupccmHttpCfgGroup | current | A collection of object(s) for configuring HTTP transport related information for delivering Call Home messages. | |
| 1.3.6.1.4.1.9.9.300.2.2.29 | GroupccmSeverityAlertGroupCfgGroup | current | A collection of objects providing information of severity based alert groups. | |
| 1.3.6.1.4.1.9.9.300.2.2.30 | GroupccmPeriodicAlertGroupCfgGroup | current | A collection of objects providing information of periodic alert groups. | |
| 1.3.6.1.4.1.9.9.300.2.2.31 | GroupccmPatternAlertGroupCfgGroup | current | A collection of objects providing information of pattern based alert groups. | |
| 1.3.6.1.4.1.9.9.300.2.2.32 | GroupccmEventAlertGroupCfgGroup | current | A collection of objects providing information of event based alert groups. | |
| 1.3.6.1.4.1.9.9.300.2.2.33 | GroupccmSmtpMsgSendFailNotifCtrlGroup | current | A collection of object(s) to control SMTP message send failure related notification(s). | |
| 1.3.6.1.4.1.9.9.300.2.2.34 | GroupccmSmtpMsgSendFailNotifGroup | current | A collection of notification(s) for SMTP message send failures. | |
| 1.3.6.1.4.1.9.9.300.2.2.35 | GroupccmAlertHCStatisticsGroup | current | A collection of objects for displaying Call Home 64 bit alert statistics. | |
| 1.3.6.1.4.1.9.9.300.2.2.36 | GroupccmAlertRateLimitGroup | current | A collection of object(s) providing information regarding the Call Home rate limit mechanism. | |
| 1.3.6.1.4.1.9.9.300.2.2.37 | GroupccmSmtpServerStatusGroup | current | A collection of object(s) providing information regarding status availability of Call Home Smtp Servers. | |
| 1.3.6.1.4.1.9.9.300.2.2.38 | GroupccmProfileHiMessageSizeGroup | current | A collection of objects providing information regarding to maximum size message to destination. | |
| 1.3.6.1.4.1.9.9.300.2.2.39 | GroupchSystemInformationGroup1 | current | A collection of objects for displaying and configuring system information pertaining to Call Home. | |
| 1.3.6.1.4.1.9.9.300.2.2.40 | GroupchSystemServicePriorityGroup | current | A collection of objects for configuring configuring system service priority pertaining to Call Home. | |
| 1.3.6.1.4.1.9.9.300.2.2.41 | GroupccmOnDemandMsgSendControlGroup | current | A collection of objects that enable sending on demand Call Home messages. | |
| 1.3.6.1.4.1.9.9.300.2.2.42 | GroupccmOnDemandMsgStatusGroup | current | A collection of object(s) to indicate status of on demand message service on the device. | |
| 1.3.6.1.4.1.9.9.300.2.2.43 | GroupccmSmartCallHomeGroup | current | A collection of objects that enable issuing Smart Call Home messages. | |
| 1.3.6.1.4.1.9.9.300.2.2.44 | GroupccmEventStatsGroup | current | A collection of object(s) indicating statistical information for the Call Home events. | |
| 1.3.6.1.4.1.9.9.300.2.2.45 | GroupccmEventNotifGroup | current | A collection of object(s) indicating the Call Home events that occurred in the system. | |
| 1.3.6.1.4.1.9.9.300.2.2.46 | GroupccmCallhomeEventsGroup | current | A collection of notification objects required for Call Home events that occurred in the system. | |
| 1.3.6.1.4.1.9.9.300.2.2.47 | GroupccmCallHomeVrfGroup | current | A collection of object(s) to manage VRF information for Call Home feature. | |
| 1.3.6.1.4.1.9.9.300.2.2.48 | GroupccmSmtpServersVrfGroup | current | A collection of object(s) to manage VRF information for SMTP Servers in Call Home feature. | |
| 1.3.6.1.4.1.9.9.300.2.2.49 | GroupccmHttpProxyServerGroup | current | A collection of objects for displaying and configuring Call Home HTTP proxy server on the devices which support HTTP proxy server for Call Home feature | |
| 1.3.6.1.4.1.9.9.300.2.2.50 | GroupccmHttpTransportVrfGroup | current | A collection of object(s) to manage VRF information for HTTP transport in Call Home feature. | |
| 1.3.6.1.4.1.9.9.300.2.2.51 | GroupccmSingleSmtpServerGroup | current | A collection of objects for displaying and configuring Call Home SMTP server on the devices which support only one SMTP server. | |
| 1.3.6.1.4.1.9.9.300.2.2.52 | GroupccmMessageSourceGroup | current | A collection of objects to manage Call Home message source address. | |
| 1.3.6.1.4.1.9.9.300.2.2.53 | GroupccmCallHomePeriodicMinutesGroup | current | A collection of objects to configure periodic interval in minutes. | |
| 1.3.6.1.4.1.9.9.300.2.2.54 | GroupccmOnDemandCliMsgGroup | current | A collection of object(s) to manage on demand Call Home messages with CLI output. | |
| 1.3.6.1.4.1.9.9.300.2.2.55 | GroupccmCallHomeDiagSignatureGroup | current | A collection of objects to manage Call Home Diagnostic Signature functionality. | |
| 1.3.6.1.4.1.9.9.300.2.2.56 | GroupccmCallHomeSecurityLevelGroup | current | A collection of objects to manage security level of Call Home. | |
| 1.3.6.1.4.1.9.9.300.2.2.57 | GroupccmCallHomeAnonymousReportingGroup | current | A collection of objects to manage reporting functionality of Call Home. | |
| 1.3.6.1.4.1.9.9.300.2.2.58 | GroupccmCallHomeAaaGroup | current | A collection of objects to manage AAA functionality for Call Home. | |
| 1.3.6.1.4.1.9.9.300.2.2.59 | GroupccmCallHomeDataPrivacyGroup | current | A collection of objects to scrub senstive data in Call Home messages. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlertGroupList | OCTET STRING (SIZE (0..8)) | current | AlertGroups are a pre-defined set of Call Home alerts. Users can specify these alert groups for a destination profile, to choose the Call Home alerts messages to be sent out to the destination. This object represents th… |
| CallHomeAlert | INTEGER { noOp(1), test(2), inventory(3) } | current | The type of the Call Home alert. noOp (1) - no alert test (2) - alert name 'Test' inventory (3) - alert name 'Inventory' . |
| CallHomeDataPrivacyLevel | INTEGER { normal(0), high(1), hostnameAndNormal(2), hostnameAndHigh(3) } | current | Call Home data privacy which scrubs data from running configuration file to protect the privacy of the user. normal (0) - scrubs all normal privacy level commands high (1) - scrubs all high privacy level commands which … |
| CallHomeMsgFormat | INTEGER { xml(1), fullText(2), shortText(3) } | current | Call Home Message format. xml (1) - XML (Extensible Markup Language) - encoded. fullText (2) - Plain text without any encoding. shortText (3) - Short text without any encoding The context of the Call Home message depend… |
| CallHomeMsgLevel | INTEGER { debug(1), normal(2), notification(3), warning(4), minor(5), major(6), critical(7), fatal(8), disaster(9), catastrophic(10) } | current | This object contains the severity level for use as a threshold for filtering the alerts sent to a destination profile. It ranges from 1 to 10, with 10 being highest severity. |
| CallHomeTransportMethod | INTEGER { email(1), ftp(2), http(3), emailAndHttp(4) } | current | Call Home transport mechanism used to deliver the alert messages. email (1), - via email ftp (2), - via ftp http (3), - via http emailAndHttp (4) - via both email and http . |