CISCO-CAS-IF-MIB
120 objects
Channel Associated Signal Interface MIB module. This MIB manages the generic CAS (Channel Associated Signal)or DS0 clear channel Interfaces in the router.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CountryCode |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.85 | IdentityciscoCasIfMIB | Channel Associated Signal Interface MIB module. This MIB manages the generic CAS (Channel Associated Signal)or DS0 clear channel Interfaces in the router. | ||
| 1.3.6.1.4.1.9.9.85.1 | NodeccasIfObjects | |||
| 1.3.6.1.4.1.9.9.85.1.1 | NodeccasDS1Objects | |||
| 1.3.6.1.4.1.9.9.85.1.1.1 | TableccasDs1IfCfgTable | not-accessible | current | The CAS/DS0 General Configuration Table for T1/E1. It contains the CAS/DS0 related standard configuration information for T1/E1. |
| 1.3.6.1.4.1.9.9.85.1.1.1.1 | RowccasDs1IfCfgEntry | not-accessible | current | An entry in the configuration table for each T1/E1. The entry is created when a T1/E1 hardware is detected. |
| 1.3.6.1.4.1.9.9.85.1.1.1.1.1 | ColumnccasDs1IfCfgDs0ChannelsConfigurable | read-only | current | This object contains the bit map of the available DS0 channel in the DS1. The MSB (most significant bit) is DS0 channel number 1. The missing bytes is default … |
| 1.3.6.1.4.1.9.9.85.1.2 | NodeccasGrpObjects | |||
| 1.3.6.1.4.1.9.9.85.1.2.1 | NodeccasGrpGeneralObjects | |||
| 1.3.6.1.4.1.9.9.85.1.2.1.1 | TableccasGrpCfgTable | not-accessible | current | The CAS/DS0 Group Standard Configuration Table. It contains the general configuration information for the CAS/DS0 group of T1/E1 interfaces. |
| 1.3.6.1.4.1.9.9.85.1.2.1.1.1 | RowccasGrpCfgEntry | not-accessible | current | A CAS/DS0 group entry. Each entry consists of the CAS group type and the CAS/DS0 group associated DS0 channels in a T1/E1. The value of ccasGrpCfgDs0Channels m… |
| 1.3.6.1.4.1.9.9.85.1.2.1.1.1.1 | ColumnccasGrpCfgIndex | not-accessible | current | An arbitrary index that uniquely identifies a DS0 group in a T1/E1. |
| 1.3.6.1.4.1.9.9.85.1.2.1.1.1.2 | ColumnccasGrpCfgType | read-create | current | The Signaling type of the DS0 group. emWinkStart - CAS E&M Wink Start. emWinkStartFgd - CAS E&M Wink Start with Feature group D. emImmedStart - CAS E&M Immedia… |
| 1.3.6.1.4.1.9.9.85.1.2.1.1.1.3 | ColumnccasGrpCfgDs0Channels | read-create | current | This object contains the bit map of the selected DS0 channels to be added into this group. The MSB (most significant bit) is DS0 channel number 1. For T1, only… |
| 1.3.6.1.4.1.9.9.85.1.2.1.1.1.4 | ColumnccasGrpCfgRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. The corresponding instance of ccasGrpCfgType can not be modified whi… |
| 1.3.6.1.4.1.9.9.85.1.2.1.1.1.5 | ColumnccasGrpCfgServiceType | read-create | current | Specify the Service type of the CAS/DS0 group. none - no service type casServSw56 - sw56 service for CAS casServModme - modem service for CAS casServAuto - aut… |
| 1.3.6.1.4.1.9.9.85.1.2.2 | NodeccasGrpEMObjects | |||
| 1.3.6.1.4.1.9.9.85.1.2.2.1 | TableccasGrpEMCfgTable | not-accessible | current | The CAS Group E&M Standard Configuration Table. It contains the CAS E&M group standard configuration information of T1/E1. |
| 1.3.6.1.4.1.9.9.85.1.2.2.1.1 | RowccasGrpEMCfgEntry | not-accessible | current | An entry in the configuration table for each CAS E&M Group in the T1/E1. The entry is created when the ccasGrpCfgType is configured as 'em' on a T1/E1 via conf… |
| 1.3.6.1.4.1.9.9.85.1.2.2.1.1.1 | ColumnccasGrpEMCfgDialType | read-write | current | Specify the addressing type of the CAS group. dtmf - Dual Tone Multi-Frequency (DTMF) digit. pulse - dial pulse. mf - Multi-Frequency (MF) digit. The default v… |
| 1.3.6.1.4.1.9.9.85.1.2.2.1.1.2 | ColumnccasGrpEMCfgDnisAni | read-write | current | Specify the type of Destination Number Identification Service (DNIS) and Automatic Number Identification (ANI) support. MF tone supports both ANI and DNIS serv… |
| 1.3.6.1.4.1.9.9.85.1.2.2.1.1.3 | ColumnccasGrpEMCfgLmrMCap | read-write | current | The M lead behavior of E&M LMR interface. inact - The m-lead status should be ignored. audio - The m-lead status is used to control generating voice packet. di… |
| 1.3.6.1.4.1.9.9.85.1.2.2.1.1.4 | ColumnccasGrpEMCfgLmrECap | read-write | current | The E lead behavior of E&M LMR interface. seize - The e-lead used as seize signal. voice - The e-lead status is used to indicate voice packet received or not. … |
| 1.3.6.1.4.1.9.9.85.1.2.2.1.1.5 | ColumnccasGrpEMCfgAutoGainControl | read-write | current | This object is used to enabling or disabling automatic gain control on this interface. AGC allows dsp to adjust the input voice volume and avoid rapid voice vo… |
| 1.3.6.1.4.1.9.9.85.1.2.2.2 | TableccasGrpEMTmTable | not-accessible | current | The E&M interface Timing Parameters table. It contains the configuration of the various E&M signaling protocol timing parameters. |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1 | RowccasGrpEMTmEntry | not-accessible | current | An entry in the E&M Timing Parameters Table for each E&M interface. |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1.1 | ColumnccasGrpEMTmClearWaitDuration | read-write | current | Time of Inactive incoming seizure signal to declare call cleared. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is em… |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1.2 | ColumnccasGrpEMTmMaxWinkWaitDuration | read-write | current | Maximum wink wait duration for sending out wink start signaling. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is emW… |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1.3 | ColumnccasGrpEMTmMaxWinkDuration | read-write | current | Maximum wink duration for sending out wink start signaling. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is emWinkSt… |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1.4 | ColumnccasGrpEMTmDelayStart | read-write | current | Timing of generation of outgoing delayed start signal from detection of incoming seizure. This object is relevant to the interfaces of the CAS group if the cca… |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1.5 | ColumnccasGrpEMTmMaxDelayDuration | read-write | current | Maximum delay signal duration for sending out delay dial signaling. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is … |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1.6 | ColumnccasGrpEMTmMinDelayPulseWidth | read-write | current | Minimum delay-dial pulse duration for incoming call. If the value of this object is 0, then no delay-dial is sent to the far end for the incoming call. This ob… |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1.7 | ColumnccasGrpEMTmDigitDuration | read-write | current | Outgoing DTMF/MF digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpCfgDialType … |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1.8 | ColumnccasGrpEMTmInterDigitDuration | read-write | current | Outgoing DTMF/MF inter-digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpCfgDia… |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1.9 | ColumnccasGrpEMTmPulseRate | read-write | current | Outgoing Pulse dialing rate in pulses per second (pps). This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpCfgD… |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1.10 | ColumnccasGrpEMTmPulseInterDigitDuration | read-write | current | Outgoing Pulse dialing inter-digit timing in milliseconds. This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpC… |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1.11 | ColumnccasGrpEMTmVoiceHangover | read-write | current | The hangover time used to determine there is no more voice packet arrived. The default value of this object is 250 milliseconds. |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1.12 | ColumnccasGrpEMTmLmrTeardown | read-write | current | LMR port tear down timeout. This object is relevant to the waiting time of teardown call on LMR port. If the value of this object is '-1', then the timeout is … |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1.13 | ColumnccasGrpEMTmPttXmt | read-write | current | This object signifies LMR port maximum transmit time. This object is relevant to how long LMR port can continue transmit voice packet without pause. |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1.14 | ColumnccasGrpEMTmPttRcv | read-write | current | This object signifies LMR port maximum receive time. This object is relevant to how long LMR port can continue receive voice packet without pause. |
| 1.3.6.1.4.1.9.9.85.1.2.2.2.1.15 | ColumnccasGrpEMTmDelayVoice | read-only | current | This object is relevant to how long LMR will delay sending the voice packet to the LMR port. |
| 1.3.6.1.4.1.9.9.85.1.2.3 | NodeccasGrpLineObjects | |||
| 1.3.6.1.4.1.9.9.85.1.2.3.1 | TableccasGrpLineCfgTable | not-accessible | current | The CAS Group FXS/SAS Standard Configuration Table. It contains the CAS FXS/SAS group standard configuration information of T1/E1. |
| 1.3.6.1.4.1.9.9.85.1.2.3.1.1 | RowccasGrpLineCfgEntry | not-accessible | current | An entry in the configuration table for each CAS FXS/SAS Group in the T1/E1. The entry is created when the ccasGrpCfgType is configured as 'fxs' or 'sas' on a … |
| 1.3.6.1.4.1.9.9.85.1.2.3.1.1.1 | ColumnccasGrpLineCfgNumberRings | read-write | current | The number of rings detected before closing loop. If the value of this object is 0, then the managed system answers immediately after the interface detects a i… |
| 1.3.6.1.4.1.9.9.85.1.2.3.1.1.2 | ColumnccasGrpLineCfgSupDisconnect | read-write | current | Specifies whether a supervisory disconnect signal will be presented to the interface when the connected party at the interface hangs up. this object is only re… |
| 1.3.6.1.4.1.9.9.85.1.2.3.1.1.3 | ColumnccasGrpLineCfgDialType | read-write | current | Specify the addressing type of the CAS group. dtmf - Dual Tone Multi-Frequency (DTMF) digit. pulse - dial pulse. The default value of this object is dtmf(1). |
| 1.3.6.1.4.1.9.9.85.1.2.3.2 | TableccasGrpLineTmTable | not-accessible | current | The FXS/SAS interface Timing Parameters table. It contains the configuration of the various FXS/SAS signaling protocol timing parameters. |
| 1.3.6.1.4.1.9.9.85.1.2.3.2.1 | RowccasGrpLineTmEntry | not-accessible | current | An entry in the FXS/SAS Timing Parameters Table for each FXS/SAS interface. |
| 1.3.6.1.4.1.9.9.85.1.2.3.2.1.1 | ColumnccasGrpLineTmDigitDuration | read-write | current | Outgoing DTMF digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpLineCfgDialType… |
| 1.3.6.1.4.1.9.9.85.1.2.3.2.1.2 | ColumnccasGrpLineTmInterDigitDuration | read-write | current | Outgoing DTMF inter-digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpLineCfgDi… |
| 1.3.6.1.4.1.9.9.85.1.2.3.2.1.3 | ColumnccasGrpLineTmPulseRate | read-write | current | Outgoing Pulse dialing rate in pulses per second (pps). This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaC… |
| 1.3.6.1.4.1.9.9.85.1.2.3.2.1.4 | ColumnccasGrpLineTmPulseInterDigitDuration | read-write | current | Outgoing Pulse dialing inter-digit timing in milliseconds. This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpS… |
| 1.3.6.1.4.1.9.9.85.1.2.4 | NodeccasGrpStaObjects | |||
| 1.3.6.1.4.1.9.9.85.1.2.4.1 | TableccasGrpStaCfgTable | not-accessible | current | The FXO/SAO standard configuration table. It contains FXO/SAO configuration parameters, one entry per FXO/SAO interface. The configuration information of this … |
| 1.3.6.1.4.1.9.9.85.1.2.4.1.1 | RowccasGrpStaCfgEntry | not-accessible | current | An entry in the standard configuration table for each FXO/SAO Group. The entry is created when the ccasGrpCfgType is configured as 'fxo' or 'sao' on a T1/E1 vi… |
| 1.3.6.1.4.1.9.9.85.1.2.4.1.1.1 | ColumnccasGrpStaCfgNumberRings | read-write | current | The number of rings sent before sending reorder to the originator and releasing resources. If the value of this object is 0, then sending reorder to the origin… |
| 1.3.6.1.4.1.9.9.85.1.2.4.1.1.2 | ColumnccasGrpStaCfgDialType | read-write | current | Specify the addressing type of the CAS group. dtmf - Dual Tone Multi-Frequency (DTMF) digit. pulse - dial pulse. The default value of this object is dtmf(1). |
| 1.3.6.1.4.1.9.9.85.1.2.4.2 | TableccasGrpStaTmTable | not-accessible | current | The FXO/SAO interface Timing Parameters table. It contains the configuration of the various FXO/SAO signaling protocol timing parameters. |
| 1.3.6.1.4.1.9.9.85.1.2.4.2.1 | RowccasGrpStaTmEntry | not-accessible | current | An entry in the FXO/SAO Timing Parameters Table for each FXO/SAO interface. |
| 1.3.6.1.4.1.9.9.85.1.2.4.2.1.1 | ColumnccasGrpStaTmDigitDuration | read-write | current | Outgoing DTMF digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpStaCfgDialType … |
| 1.3.6.1.4.1.9.9.85.1.2.4.2.1.2 | ColumnccasGrpStaTmInterDigitDuration | read-write | current | Outgoing DTMF inter-digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpStaCfgDia… |
| 1.3.6.1.4.1.9.9.85.1.2.4.2.1.3 | ColumnccasGrpStaTmPulseRate | read-write | current | Outgoing Pulse dialing rate in pulses per second (pps). This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaC… |
| 1.3.6.1.4.1.9.9.85.1.2.4.2.1.4 | ColumnccasGrpStaTmPulseInterDigitDuration | read-write | current | Outgoing Pulse dialing inter-digit timing in milliseconds. This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpS… |
| 1.3.6.1.4.1.9.9.85.1.2.5 | NodeccasGrpABCDObjects | |||
| 1.3.6.1.4.1.9.9.85.1.2.5.1 | TableccasGrpABCDCfgTable | not-accessible | current | The CAS group custom ABCD bits configuration table for E1. It contains A/B/C/D bits handling objects, one entry per CAS group on an E1 interface. |
| 1.3.6.1.4.1.9.9.85.1.2.5.1.1 | RowccasGrpABCDCfgEntry | not-accessible | current | An entry in the custom ABCD configuration table for each CAS Group on an E1 interface. The entry is created when a CAS group is configured on a E1. The entry i… |
| 1.3.6.1.4.1.9.9.85.1.2.5.1.1.1 | ColumnccasGrpABCDCfgInvertBits | read-write | current | Specify the A/B/C/D bit mask to invert the A/B/C/D bits value before the A/B/C/D bits are sent or after the A/B/C/D bits are received. 1-bit - enable bit inver… |
| 1.3.6.1.4.1.9.9.85.1.2.5.1.1.2 | ColumnccasGrpABCDCfgUnusedBits | read-write | current | Specify the Unused A/B/C/D bit values to transmit. If any A/B/C/D bit is unused, the bit values in this object will be used to transmit for the unused A/B/C/D … |
| 1.3.6.1.4.1.9.9.85.1.3 | NodeccasChannelObjects | |||
| 1.3.6.1.4.1.9.9.85.1.3.1 | TableccasChannelCfgTable | not-accessible | current | The CAS channel Standard Configuration Table. It contains the standard configuration information of CAS channel of T1/E1. |
| 1.3.6.1.4.1.9.9.85.1.3.1.1 | RowccasChannelCfgEntry | not-accessible | current | An entry in the configuration table for each CAS channel. The entry is created when a CAS channel is configured on a T1/E1 via configuration command. The entry… |
| 1.3.6.1.4.1.9.9.85.1.3.1.1.1 | ColumnccasChannelCfgDS1IfIndex | read-only | current | the ifIndex of this CAS channel associated T1/E1. |
| 1.3.6.1.4.1.9.9.85.1.3.1.1.2 | ColumnccasChannelCfgGroup | read-only | current | The CAS channel associated CAS group number. |
| 1.3.6.1.4.1.9.9.85.1.3.1.1.3 | ColumnccasChannelCfgTimeSlot | read-only | current | The CAS channel associated T1/E1 timeslot. |
| 1.3.6.1.4.1.9.9.85.1.3.1.1.4 | ColumnccasChannelCfgBusyOut | read-write | current | The CAS channel busyout configuration. true - the CAS channel is busied out. false - the CAS is normal. The default value for this object is 'false'. |
| 1.3.6.1.4.1.9.9.85.1.3.2 | TableccasChannelStatusTable | not-accessible | current | The CAS channel Status Table. It contains general information about the status of CAS channel. |
| 1.3.6.1.4.1.9.9.85.1.3.2.1 | RowccasChannelStatusEntry | not-accessible | current | An entry in the status table for each CAS channel. |
| 1.3.6.1.4.1.9.9.85.1.3.2.1.1 | ColumnccasChannelStatusRecvSignalBits | read-only | current | The receive ABCD signaling bits for the CAS channel. aBit - the signaling bit in the 6th frame bBit - the signaling bit in the 12th frame cBit - the signaling … |
| 1.3.6.1.4.1.9.9.85.1.3.2.1.2 | ColumnccasChannelStatusBusyOut | read-only | current | The CAS channel busyout state. true - the CAS channel is busied out. false - the CAS is normal. |
| 1.3.6.1.4.1.9.9.85.1.3.2.1.3 | ColumnccasChannelStatusInfoType | read-only | current | The Information Transfer Capability for the current or last call. unknown - If since system startup there has been no call on this interface, this object has a… |
| 1.3.6.1.4.1.9.9.85.1.3.2.1.4 | ColumnccasChannelStatusXmitSignalBits | read-only | current | The transmit ABCD signaling bits for the CAS channel. aBit - the signaling bit in the 6th frame bBit - the signaling bit in the 12th frame cBit - the signaling… |
| 1.3.6.1.4.1.9.9.85.1.4 | NodeccasVoiceCfgObjects | |||
| 1.3.6.1.4.1.9.9.85.1.4.1 | TableccasVoiceCfgTable | not-accessible | current | The voice specific configuration Table. It contains information about the voice related configuration parameters for a CAS group. |
| 1.3.6.1.4.1.9.9.85.1.4.1.1 | RowccasVoiceCfgEntry | not-accessible | current | An entry in the voice specific configuration table for each CAS/DS0 group of a DS1. The entry is created if the associated CAS/DS0 group is created and the voi… |
| 1.3.6.1.4.1.9.9.85.1.4.1.1.1 | ColumnccasVoiceCfgNoiseRegEnable | read-write | current | The object indicates whether or not the background noise should be played to fill silence gaps if VAD is activated. The default value of this object is 'true'. |
| 1.3.6.1.4.1.9.9.85.1.4.1.1.2 | ColumnccasVoiceCfgNonLinearProcEnable | read-write | current | The object indicates whether or not the Nonlinear Processing is enabled for the interface. The default value of this object is 'true'. |
| 1.3.6.1.4.1.9.9.85.1.4.1.1.3 | ColumnccasVoiceCfgMusicOnHoldThreshold | read-write | current | The object specifies the Music On Hold Threshold for the interface. The default value of this object is -38 dBm. |
| 1.3.6.1.4.1.9.9.85.1.4.1.1.4 | ColumnccasVoiceCfgInGain | read-write | current | This object contains the amount of gain inserted at the receiver side of the interface. The input gain settings only define a gain/loss relative to the 0 dB se… |
| 1.3.6.1.4.1.9.9.85.1.4.1.1.5 | ColumnccasVoiceCfgOutAttn | read-write | current | This object contains the amount of attenuation inserted at the transmit side of the interface. The output attenuation settings only define a loss relative to t… |
| 1.3.6.1.4.1.9.9.85.1.4.1.1.6 | ColumnccasVoiceCfgEchoCancelEnable | read-write | current | The object specifies whether or not the Echo Cancellation is enabled for the interface. The default value of this object is 'true'. |
| 1.3.6.1.4.1.9.9.85.1.4.1.1.7 | ColumnccasVoiceCfgEchoCancelCoverage | read-write | current | The object specifies the Echo Canceller coverage for the interface. This object is valid if the ccasVoiceCfgEchoCancelEnable object is 'true'. echoCanceller8ms… |
| 1.3.6.1.4.1.9.9.85.1.4.1.1.8 | ColumnccasVoiceCfgConnectionMode | read-write | current | The object indicates the connection mode of the interface. normal - the interface acts normally to handle incoming and outgoing call. trunk - the interface act… |
| 1.3.6.1.4.1.9.9.85.1.4.1.1.9 | ColumnccasVoiceCfgConnectionNumber | read-write | current | This is the E.164 phone number that is used to establish connection with trunking mode or PLAR mode. If the ccasVoiceCfgConnectionMode is 'normal', then this o… |
| 1.3.6.1.4.1.9.9.85.1.4.1.1.10 | ColumnccasVoiceCfgInitialDigitTimeOut | read-write | current | This is the initial digit timeout that indicates the amount of time the managed system waits for an initial input digit from the caller. The timer is activated… |
| 1.3.6.1.4.1.9.9.85.1.4.1.1.11 | ColumnccasVoiceCfgInterDigitTimeOut | read-write | current | This is the inter-digit timeout that indicates the amount of time the managed system waits for a subsequent input digit from the caller. The timer is started u… |
| 1.3.6.1.4.1.9.9.85.1.4.1.1.12 | ColumnccasVoiceCfgRegionalTone | read-write | current | This object contains the current regional setting for the call progress tone to be used by this CAS group. |
| 1.3.6.1.4.1.9.9.85.1.5 | NodeccasXgcpCfgObjects | |||
| 1.3.6.1.4.1.9.9.85.1.5.1 | TableccasXgcpCfgTable | not-accessible | current | The XGCP configuration Table contains information about DS0 usage by XGCP(SGCP/MGCP). XGCP is meant to represent both Simple Gateway Control Protocol (SGCP) an… |
| 1.3.6.1.4.1.9.9.85.1.5.1.1 | RowccasXgcpCfgEntry | not-accessible | current | An entry in the configuration table for each DS0 group of a DS1. The entry is created if the DS0 group is configured as null-signaling and ccasGrpCfgServiceTyp… |
| 1.3.6.1.4.1.9.9.85.1.5.1.1.1 | ColumnccasXgcpCfgCotToneCo1 | read-write | current | This object specifies the continuity test tone frequencies for co1. Co1 is the COT tone frequency from the terminating switch in transponder mode and is from t… |
| 1.3.6.1.4.1.9.9.85.1.5.1.1.2 | ColumnccasXgcpCfgCotToneCo2 | read-write | current | This object specifies the continuity test tone frequencies for co2. Co2 is the COT tone frequency from the originating switch only in transponder mode. |
| 1.3.6.1.4.1.9.9.85.3 | NodeccasIfMIBConformance | |||
| 1.3.6.1.4.1.9.9.85.3.1 | NodeccasIfMIBCompliances | |||
| 1.3.6.1.4.1.9.9.85.3.1.1 | ComplianceccasIfMIBCompliance | read-only | obsolete | The compliance statement for entities which implement the Cisco Voice Digital interface MIB |
| 1.3.6.1.4.1.9.9.85.3.1.2 | ComplianceccasIfMIBComplianceRev1 | read-only | deprecated | The compliance statement for entities which implement the Cisco Voice Digital interface MIB |
| 1.3.6.1.4.1.9.9.85.3.1.3 | ComplianceccasIfMIBComplianceRev2 | read-only | deprecated | The compliance statement for entities which implement the Cisco Voice Digital interface MIB |
| 1.3.6.1.4.1.9.9.85.3.1.4 | ComplianceccasIfMIBComplianceRev3 | read-only | current | The compliance statement for entities which implement the Cisco Voice Digital interface MIB |
| 1.3.6.1.4.1.9.9.85.3.2 | NodeccasIfMIBGroups | |||
| 1.3.6.1.4.1.9.9.85.3.2.1 | GroupccasIfDS1Group | current | The collection of objects providing CAS/DS0 related T1/E1 information. | |
| 1.3.6.1.4.1.9.9.85.3.2.2 | GroupccasGeneralInfoGroup | obsolete | A collection of objects providing general information applicable to Channel Associated Signaling interfaces. | |
| 1.3.6.1.4.1.9.9.85.3.2.3 | GroupccasEMGroup | deprecated | A collection of objects providing information applicable to the CAS E&M signal interfaces. | |
| 1.3.6.1.4.1.9.9.85.3.2.4 | GroupccasLineGroup | current | A collection of objects providing information applicable to the CAS FXS/SAS signal interfaces. | |
| 1.3.6.1.4.1.9.9.85.3.2.5 | GroupccasStaGroup | current | A collection of objects providing information applicable to the CAS FXO/SAO signal interfaces. | |
| 1.3.6.1.4.1.9.9.85.3.2.6 | GroupccasCustomABCDGroup | current | A collection of objects providing ABCD bits configuration information applicable to the CAS group on E1 interface. | |
| 1.3.6.1.4.1.9.9.85.3.2.7 | GroupccasVoiceGroup | current | A collection of objects providing information applicable to the CAS/DS0 group that supports voice capability. | |
| 1.3.6.1.4.1.9.9.85.3.2.8 | GroupccasGeneralInfoGroupRev1 | current | A collection of objects providing general information applicable to CAS/DS0 interfaces. | |
| 1.3.6.1.4.1.9.9.85.3.2.9 | GroupccasChannelInfoGroup | current | A collection of objects providing channel signaling information applicable to Channel Associated Signaling interfaces. | |
| 1.3.6.1.4.1.9.9.85.3.2.10 | GroupccasXgcpCfgGroup | current | A collection of objects providing XGCP specific information applicable to DS0. | |
| 1.3.6.1.4.1.9.9.85.3.2.11 | GroupccasEMGroupRev1 | deprecated | A collection of objects providing information applicable to the CAS E&M signal interfaces. | |
| 1.3.6.1.4.1.9.9.85.3.2.12 | GroupccasEMGroupRev2 | current | A collection of objects providing information applicable to the CAS E&M signal interfaces. |