CISCO-CDL-MIB
59 objects
This MIB module defines objects to manage Converged Data Link (CDL). CDL provides OAM&P (Operation, Administration, Maintenance and Provisioning) in Ethernet packet-based optical networks without a SONET/SDH layer. The CDL functionality can be divided into the following categories: APS/Defect Indications: The CDL frame carries defect indication bits and provides signalling mechanism support for automatic protection switching. Message Channel: The message channel is used to carry control (e.g. routing, signalling) and management traffic. Packet-by-packet multiplexing of multiple data flows: CDL uses one or two octets to identify the elementary packet stream that this packet belongs to. This allows more than one elementary packet stream to share the bandwidth on a CDL enabled interface. This MIB defines objects to manage Defect Indications and the Packet-by-packet Multiplexing feature. The CDL Message channel is modeled as a separate interface and should be controlled using the IF-MIB and other MIBs for managing IP. This MIB does not provide a mechanism to manage the CDL message channel. APS configuration and monitoring can be done using the CISCO-APS-MIB and CISCO-APS-EXT-MIB.
Imported Objects
| CISCO-SMI | ciscoExperiment |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.88 | IdentityciscoCdlMIB | This MIB module defines objects to manage Converged Data Link (CDL). CDL provides OAM&P (Operation, Administration, Maintenance and Provisioning) in Ethernet p… | ||
| 1.3.6.1.4.1.9.10.88.0 | NodecoCdlMIBNotifications | |||
| 1.3.6.1.4.1.9.10.88.0.1 | NotificationcoCdlRxAggDefectIndChange | current | This notification is sent when the value of the hop-by-hop forward defect indication (FDI-H), hop-by-hop backward defect indication (BDI-H), or end-to-end (agg… | |
| 1.3.6.1.4.1.9.10.88.0.2 | NotificationcoCdlFromCdlNetFlowDIChange | current | This notification is sent when the value of the received end-to-end path forward defect indication or the received end-to-end path backward defect indication c… | |
| 1.3.6.1.4.1.9.10.88.1 | NodecoCdlMIBObjects | |||
| 1.3.6.1.4.1.9.10.88.1.1 | NodecoCdlBaseGroup | |||
| 1.3.6.1.4.1.9.10.88.1.1.1 | TablecoCdlIntfTable | not-accessible | current | This table provides objects to configure and monitor CDL on an Ethernet interface. |
| 1.3.6.1.4.1.9.10.88.1.1.1.1 | RowcoCdlIntfEntry | not-accessible | current | An entry in the CDL Interface Table, providing objects to configure and monitor CDL on an Ethernet interface. An entry exists for each CDL capable Ethernet int… |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.1 | ColumncoCdlAdminStatus | read-write | current | Enables/disables CDL on this interface. When this object is set to 'true', CDL is enabled on this interface. When this object is set to 'false', CDL is disable… |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.2 | ColumncoCdlForceEndOfHop | read-write | current | When set to 'true', this object forces CDL Hop Terminating behavior at this interface. A CDL Hop Terminating Network Element terminates (generates in one direc… |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.3 | ColumncoCdlNodeBehavior | read-only | current | This object indicates the current CDL defect indication behavior of this network element, at this interface. A network element can take on one of three roles a… |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.4 | ColumncoCdlRxAggDefectIndCurrStatus | read-only | current | This object reflects the current status of the CDL Defect Indication bits received on this interface. |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.5 | ColumncoCdlRxAggDefectIndLastChange | read-only | current | This object specifies the value of sysUpTime at the last time there was a change in the value of coCdlRxAggDefectIndCurrStatus. |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.6 | ColumncoCdlTxAggDefectIndCurrStatus | read-only | current | This object reflects the current status of the CDL Defect Indication bits transmitted on this interface. |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.7 | ColumncoCdlTxAggDefectIndLastChange | read-only | current | This object specifies the value of sysUpTime at the last time there was a change in the value of coCdlTxAggDefectIndCurrStatus. |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.8 | ColumncoCdlTransmitMaxFlowIdentifier | read-write | current | A CDL enabled interface can aggregate packet streams (called elementary packet streams) from multiple interfaces. CDL uses one or two octets to identify the el… |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.9 | ColumncoCdlReceiveMaxFlowIdentifier | read-write | current | A CDL enabled interface can aggregate packet streams (called elementary packet streams) from multiple interfaces. CDL uses one or two octets to identify the el… |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.10 | ColumncoCdlRxHeaderCRCError | read-only | current | The number of CDL frames received with CDL Header CRC errors. This object represents the lower word value of the counter associated with the number of CDL head… |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.11 | ColumncoCdlRxHeaderCRCErrorOverflow | read-only | current | This object represents the higher word value of the counter associated with the number of CDL Header CRC errors encountered in the receive direction. NOTE: The… |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.12 | ColumncoCdlHCRxHeaderCRCError | read-only | current | The number of CDL frames received with CDL Header CRC errors. This is a High Capacity (64 bit) version of the coCdlRxHeaderCRCError counter. |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.13 | ColumncoCdlRxInvalidFlowID | read-only | current | This object counts the number of CDL Flow Identifier lookup errors in the receive direction. When a CDL interface multiplexes/demultiplexes more than one eleme… |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.14 | ColumncoCdlRxInvalidFlowIDOverflow | read-only | current | This object represents the higher word value of the counter associated with the number of CDL Flow Identifier lookup errors encountered in the receive directio… |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.15 | ColumncoCdlHCRxInvalidFlowID | read-only | current | This object counts the number of CDL Flow Identifier lookup errors in the receive direction. When a CDL interface multiplexes/demultiplexes more than one eleme… |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.16 | ColumncoCdlRxNonCdlPackets | read-only | current | This object counts the number of packets received without a CDL header on this interface. This counter is incremented only when CDL is enabled on this interfac… |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.17 | ColumncoCdlRxNonCdlPacketsOverflow | read-only | current | This object represents the higher word value of the counter associated with the number of packets received without a CDL header on this interface. NOTE: The ob… |
| 1.3.6.1.4.1.9.10.88.1.1.1.1.18 | ColumncoCdlHCRxNonCdlPackets | read-only | current | This object counts the number of packets received without a CDL header on this interface. This counter is incremented only when CDL is enabled on this interfac… |
| 1.3.6.1.4.1.9.10.88.1.1.2 | ScalarcoCdlDefectIndNotifyEnable | read-write | current | This object indicates whether a change in the received CDL Defect Indications, including the implicit end-to-end path defect indication as well as the CDL defe… |
| 1.3.6.1.4.1.9.10.88.1.1.3 | ScalarcoCdlDefectIndSetSoakInterval | read-write | current | To minimize the probability of prematurely reacting to momentary signal variations, a soak time may be incorporated into the defect indications. The indication… |
| 1.3.6.1.4.1.9.10.88.1.1.4 | ScalarcoCdlDefectIndClearSoakInterval | read-write | current | To minimize the probability of prematurely reacting to momentary signal variations, a soak time may be incorporated into the defect indications. The indication… |
| 1.3.6.1.4.1.9.10.88.1.1.5 | ScalarcoCdlDINotifyThrottleInterval | read-write | current | The minimum time interval between generation of successive CDL defect indication 'notification-events' by this agent. A 'notification-event' is the transmissio… |
| 1.3.6.1.4.1.9.10.88.1.2 | NodecoCdlFlowTermGroup | |||
| 1.3.6.1.4.1.9.10.88.1.2.1 | TablecoCdlFlowTermTable | not-accessible | current | This table contains objects used to manage logical or physical interfaces representing elementary packet streams at the point where the CDL path defect indicat… |
| 1.3.6.1.4.1.9.10.88.1.2.1.1 | RowcoCdlFlowTermEntry | not-accessible | current | An entry that contains objects used to manage a logical or physical interface representing a single elementary packet stream at the point where the CDL path de… |
| 1.3.6.1.4.1.9.10.88.1.2.1.1.1 | ColumncoCdlFromCdlNetFlowIdentifier | read-write | current | This object specifies the flow identifier value received from the CDL network that identifies this elementary packet stream at this interface. Note that if CDL… |
| 1.3.6.1.4.1.9.10.88.1.2.1.1.2 | ColumncoCdlToCdlNetFlowIdentifier | read-write | current | This object specifies the flow identifier value set in CDL packets in this elementary packet stream that are progressed from this interface towards the CDL net… |
| 1.3.6.1.4.1.9.10.88.1.2.1.1.3 | ColumncoCdlFromCdlNetFlowDICurrStatus | read-only | current | This object reflects the current status of the CDL flow defect indications received from the CDL network, at this interface. Note that the end-to-end path forw… |
| 1.3.6.1.4.1.9.10.88.1.2.1.1.4 | ColumncoCdlFromCdlNetFlowDILastChange | read-only | current | This object specifies the value of sysUpTime at the last time there was a change in the value of coCdlFromCdlNetFlowDICurrStatus. |
| 1.3.6.1.4.1.9.10.88.1.2.1.1.5 | ColumncoCdlToCdlNetFlowDICurrStatus | read-only | current | This object reflects the current status of the CDL flow defect indications progressed towards the CDL network from this interface. Note that the end-to-end pat… |
| 1.3.6.1.4.1.9.10.88.1.2.1.1.6 | ColumncoCdlToCdlNetFlowDILastChange | read-only | current | This object specifies the value of sysUpTime at the last time there was a change in the value of coCdlToCdlNetFlowDICurrStatus. |
| 1.3.6.1.4.1.9.10.88.1.2.1.1.7 | ColumncoCdlFromCdlNetEthernetCRC | read-only | current | This object represents the lower word value of the counter that provides a count of Ethernet packets with CRC errors, for an elementary packet stream, at the p… |
| 1.3.6.1.4.1.9.10.88.1.2.1.1.8 | ColumncoCdlFromCdlNetEthernetCRCOvrflw | read-only | current | This object represents the higher word value of the counter that provides a count of Ethernet packets with CRC errors, for an elementary packet stream, at the … |
| 1.3.6.1.4.1.9.10.88.1.2.1.1.9 | ColumncoCdlFromCdlNetHCEthernetCRC | read-only | current | This object provides a count of Ethernet packets with CRC errors, for an elementary packet stream, at the point where the CDL header is removed. When Ethernet … |
| 1.3.6.1.4.1.9.10.88.3 | NodecoCdlMIBConformance | |||
| 1.3.6.1.4.1.9.10.88.3.1 | NodecoCdlMIBCompliances | |||
| 1.3.6.1.4.1.9.10.88.3.1.1 | CompliancecoCdlMIBCompliance | read-only | deprecated | The Compliance statement for the Cisco CDL MIB. |
| 1.3.6.1.4.1.9.10.88.3.1.2 | CompliancecoCdlMIBCompliance2 | read-only | current | The Compliance statement for the Cisco CDL MIB. |
| 1.3.6.1.4.1.9.10.88.3.2 | NodecoCdlMIBGroups | |||
| 1.3.6.1.4.1.9.10.88.3.2.1 | GroupcoCdlMIBBaseGroup | current | A collection of objects used to control and monitor CDL on an Ethernet interface. | |
| 1.3.6.1.4.1.9.10.88.3.2.2 | GroupcoCdlMIBFlowIdGroup | current | A collection of objects used to manage packet-by-packet multiplexing on a CDL enabled interface. | |
| 1.3.6.1.4.1.9.10.88.3.2.3 | GroupcoCdlMIBFlowTermGroup | deprecated | A collection of objects to configure and monitor the status of elementary packet streams at path terminating interfaces. | |
| 1.3.6.1.4.1.9.10.88.3.2.4 | GroupcoCdlDIConfigGroup | current | A collection of objects to configure CDL aggregate defect indication behavior. | |
| 1.3.6.1.4.1.9.10.88.3.2.5 | GroupcoCdlDIAggMandatoryGroup | current | A collection of objects to monitor CDL aggregate defect indications. | |
| 1.3.6.1.4.1.9.10.88.3.2.6 | GroupcoCdlDIAggNotifGroup | current | A collection of notifications for CDL aggregate defect indications. | |
| 1.3.6.1.4.1.9.10.88.3.2.7 | GroupcoCdlDIFlowNotifGroup | current | A collection of notifications for CDL flow defect indications. | |
| 1.3.6.1.4.1.9.10.88.3.2.8 | GroupcoCdlMIBFlowTerm2Group | current | A collection of objects to configure and monitor the status of elementary packet streams at path terminating interfaces. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CoCdlAggDefectIndStatus | BITS { hopByHopForwardDefect(0), hopByHopBackwardDefect(1), endToEndAggPathForwardDefect(2) } | current | This reflects the status of the aggregate defect indication bits, i.e., those defect indication bits defined to reflect the protection hop and aggregate path status in the CDL OAM field. The status of the end-to-end bac… |
| CoCdlFlowDefectIndStatus | BITS { endToEndPathImplicitFwdDefect(0), endToEndPathBackwardDefect(1) } | current | This reflects the status of the CDL flow defect indications. The end-to-end path forward defect indication is implicit, i.e. it is not signalled using a bit. An end-to-end path forward defect is inferred when no CDL Eth… |
| CoCdlFlowIdentifier | Unsigned32 (0..65535) | current | A CDL Flow Identifier value that is used to differentiate one elementary packet stream from other elementary packet streams carried on a CDL enabled interface. This value is carried in the CDL header of packets belongin… |
| CoCdlNodeBehavior | INTEGER { endOfAggPath(1), endOfHop(2), cdlRegenerator(3) } | current | A network element can take on one of three roles for each CDL enabled interface: endOfHop endOfAggPath cdlRegenerator endOfHop: Indicates that this network element acts as a CDL Hop Terminating Network Element but not a… |