CISCO-CIDS-MIB
137 objects
Cisco Intrusion Detection System MIB. Provides trap definitions for the evAlert and evError elements of the IDIOM (Intrusion Detection and Operations Messages) document and read support for the Intrusion Detection System (sensor) health information, such as if the sensor is in a memory critical stage.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CiscoIpProtocol Unsigned64 |
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.383 | IdentityciscoCidsMIB | Cisco Intrusion Detection System MIB. Provides trap definitions for the evAlert and evError elements of the IDIOM (Intrusion Detection and Operations Messages)… | ||
| 1.3.6.1.4.1.9.9.383.0 | NodeciscoCidsMIBNotifs | |||
| 1.3.6.1.4.1.9.9.383.0.1 | NotificationciscoCidsAlert | current | Event indicating that some suspicious or malicious activity has been detected on a monitored network. | |
| 1.3.6.1.4.1.9.9.383.0.2 | NotificationciscoCidsError | current | Event indicating that an error has occurred. | |
| 1.3.6.1.4.1.9.9.383.0.3 | NotificationciscoCidsHealthHeartBeat | current | This notification is triggered by the heart beat events (evStatus). The heartbeat is configured to run on a periodic basis and can be enabled/disabled through … | |
| 1.3.6.1.4.1.9.9.383.0.4 | NotificationciscoCidsHealthMetricChange | current | This notification notifies the recipient of health and security status changes. This notification is triggered when there is a change in the value of monitored… | |
| 1.3.6.1.4.1.9.9.383.1 | NodeciscoCidsMIBObjects | |||
| 1.3.6.1.4.1.9.9.383.1.1 | NodecidsGeneral | |||
| 1.3.6.1.4.1.9.9.383.1.1.1 | ScalarcidsGeneralEventId | accessible-for-notify | current | Identifies the sequence number of an event. This value needs to be unique within the scope of the originating host. |
| 1.3.6.1.4.1.9.9.383.1.1.2 | ScalarcidsGeneralLocalTime | accessible-for-notify | current | The local time on the Cisco intrusion detection system sensor when the alert was generated. |
| 1.3.6.1.4.1.9.9.383.1.1.3 | ScalarcidsGeneralUTCTime | accessible-for-notify | current | The UTC time on the Cisco intrusion detection system sensor when the alert was generated. |
| 1.3.6.1.4.1.9.9.383.1.1.4 | ScalarcidsGeneralOriginatorHostId | accessible-for-notify | current | A globally unique identifier for a Cids host. Could be a host name or an IP address. |
| 1.3.6.1.4.1.9.9.383.1.1.5 | ScalarcidsGeneralOriginatorAppName | accessible-for-notify | current | The optional generic name of a Cids application. |
| 1.3.6.1.4.1.9.9.383.1.1.6 | ScalarcidsGeneralOriginatorAppId | accessible-for-notify | current | The optional id of this instance of the application. Typically the process id (pid). |
| 1.3.6.1.4.1.9.9.383.1.1.7 | ScalarcidsNotificationsEnabled | read-write | current | Indicates whether notifications will or will not be sent when an event is generated by the device. |
| 1.3.6.1.4.1.9.9.383.1.2 | NodecidsAlert | |||
| 1.3.6.1.4.1.9.9.383.1.2.1 | ScalarcidsAlertSeverity | accessible-for-notify | current | The severity associated with a Cids signature (informational, low, medium or high for example). |
| 1.3.6.1.4.1.9.9.383.1.2.2 | ScalarcidsAlertAlarmTraits | accessible-for-notify | current | The alarm traits is an unsigned 16-bit integer representing the value of the 16 user-defined alarm traits specified in the configuration for the signature that… |
| 1.3.6.1.4.1.9.9.383.1.2.3 | ScalarcidsAlertSignature | accessible-for-notify | current | Content is a string containing details about the signature that fired, without any specifics tied to this instance of the alert. The cidsAlertSignatureSigName,… |
| 1.3.6.1.4.1.9.9.383.1.2.4 | ScalarcidsAlertSignatureSigName | accessible-for-notify | current | The name of the Intrusion detection signature that triggered this event. |
| 1.3.6.1.4.1.9.9.383.1.2.5 | ScalarcidsAlertSignatureSigId | accessible-for-notify | current | The ID of the Intrusion detection signature that triggered this event. The ID combines with the cidsAlertSignatureSubSigId to create a unique key that identifi… |
| 1.3.6.1.4.1.9.9.383.1.2.6 | ScalarcidsAlertSignatureSubSigId | accessible-for-notify | current | The optional Sub ID of the Intrusion detection signature that triggered this event. The Sub ID combines with the cidsAlertSignatureSigId to create a unique key… |
| 1.3.6.1.4.1.9.9.383.1.2.7 | ScalarcidsAlertSignatureVersion | accessible-for-notify | current | The optional version attribute defines the version number of the signature update in which the triggering signature was introduced or was last modified. Exampl… |
| 1.3.6.1.4.1.9.9.383.1.2.8 | ScalarcidsAlertSummary | accessible-for-notify | current | Optional, if present, specifies that this is a summary alert, representing one or more alerts with common characteristics. The numeric value indicates the numb… |
| 1.3.6.1.4.1.9.9.383.1.2.9 | ScalarcidsAlertSummaryType | accessible-for-notify | current | Common characteristics shared by all non-summary alerts included in a summary alert. |
| 1.3.6.1.4.1.9.9.383.1.2.10 | ScalarcidsAlertSummaryFinal | accessible-for-notify | current | The optional 'final' attribute indicates whether this is the last evAlert containing the same value in the 'initialAlert' attribute. The 'final' attribute may … |
| 1.3.6.1.4.1.9.9.383.1.2.11 | ScalarcidsAlertSummaryInitialAlert | accessible-for-notify | current | Serial number for the initial alert, which is guaranteed unique within the scope of the originating host. |
| 1.3.6.1.4.1.9.9.383.1.2.12 | ScalarcidsAlertInterfaceGroup | accessible-for-notify | deprecated | This object indicates an optional numeric identifier for a sniffing interface group on this host. |
| 1.3.6.1.4.1.9.9.383.1.2.13 | ScalarcidsAlertVlan | accessible-for-notify | current | An optional numeric identifier for a vlan. Identifies the vlan that uses the number in ISL or 802.3.1q headers. |
| 1.3.6.1.4.1.9.9.383.1.2.14 | ScalarcidsAlertVictimContext | accessible-for-notify | current | Optional Base64-encoded representation of the stream data that was sourced by the victim. |
| 1.3.6.1.4.1.9.9.383.1.2.15 | ScalarcidsAlertAttackerContext | accessible-for-notify | current | Optional Base64-encoded representation of the stream data that was sourced by the Attacker. |
| 1.3.6.1.4.1.9.9.383.1.2.16 | ScalarcidsAlertAttackerAddress | accessible-for-notify | current | Optional IP address and ports on a monitored interface. The 'locality' attribute is a string that indicates the relative location of the IP address within the … |
| 1.3.6.1.4.1.9.9.383.1.2.17 | ScalarcidsAlertVictimAddress | accessible-for-notify | current | Optional IP address and ports on a monitored interface. The 'locality' attribute is a string that indicates the relative location of the IP address within the … |
| 1.3.6.1.4.1.9.9.383.1.2.18 | ScalarcidsAlertIpLoggingActivated | accessible-for-notify | current | Indicates whether IP logging has been activated as the result of the alert. A separate evIpLogStatus event will be generated when logging has been completed. T… |
| 1.3.6.1.4.1.9.9.383.1.2.19 | ScalarcidsAlertTcpResetSent | accessible-for-notify | current | Indicates whether a attempt was made to reset a tcp connection as the result of the alert. The addresses and ports affected must be implied from the informatio… |
| 1.3.6.1.4.1.9.9.383.1.2.20 | ScalarcidsAlertShunRequested | accessible-for-notify | current | Indicates whether an IP address or tcp connection has been requested to be shunned as a result of the alert. Details about the addresses and ports involved in … |
| 1.3.6.1.4.1.9.9.383.1.2.21 | ScalarcidsAlertDetails | accessible-for-notify | current | Textual details about the specific alert instance, not just the signature. |
| 1.3.6.1.4.1.9.9.383.1.2.22 | ScalarcidsAlertIpLogId | accessible-for-notify | current | IP log identifiers for IP logs that were added as the result of this alert. |
| 1.3.6.1.4.1.9.9.383.1.2.23 | ScalarcidsThreatResponseStatus | accessible-for-notify | current | A brief textual description of the status of the alarm given by the Cisco Systems Threat Response engine. |
| 1.3.6.1.4.1.9.9.383.1.2.24 | ScalarcidsThreatResponseSeverity | accessible-for-notify | current | The alarm severity as assigned by the Cisco Systems Threat Response engine. |
| 1.3.6.1.4.1.9.9.383.1.2.25 | ScalarcidsAlertEventRiskRating | accessible-for-notify | current | A risk factor that incorporates several additional pieces of information beyond the detection of a potentially malicious action. The factors that characterize … |
| 1.3.6.1.4.1.9.9.383.1.2.26 | ScalarcidsAlertIfIndex | accessible-for-notify | current | The ifIndex on which the activity was detected. |
| 1.3.6.1.4.1.9.9.383.1.2.27 | ScalarcidsAlertProtocol | accessible-for-notify | current | Identifies the IP protocol associated with the alert. |
| 1.3.6.1.4.1.9.9.383.1.2.28 | ScalarcidsAlertDeniedAttacker | accessible-for-notify | current | Indicates that the traffic from originating from the attacker is being blocked as a result of the alert. This element may be omitted if and only if its value i… |
| 1.3.6.1.4.1.9.9.383.1.2.29 | ScalarcidsAlertDeniedFlow | accessible-for-notify | current | Indicates that the traffic on the TCP connection being blocked as a result of the alert. This element may be omitted if and only if its value is false. |
| 1.3.6.1.4.1.9.9.383.1.2.30 | ScalarcidsAlertDenyPacketReqNotPerf | accessible-for-notify | current | Indicates whether the packet that triggered the alert would have been denied as a result of the alert if the intrusion prevention system was operating in inlin… |
| 1.3.6.1.4.1.9.9.383.1.2.31 | ScalarcidsAlertDenyFlowReqNotPerf | accessible-for-notify | current | Indicates whether the flow that triggered the alert would have been denied as a result of the alert if the intrusion prevention system was operating in inline … |
| 1.3.6.1.4.1.9.9.383.1.2.32 | ScalarcidsAlertDenyAttackerReqNotPerf | accessible-for-notify | current | Indicates whether the traffic from the attacker that triggered the alert would have been denied as a result of the alert if the intrusion prevention system was… |
| 1.3.6.1.4.1.9.9.383.1.2.33 | ScalarcidsAlertBlockConnectionReq | accessible-for-notify | current | Indicates that a TCP connection has been requested to be blocked as a result of the alert. This element may be omitted if and only if its value is false. |
| 1.3.6.1.4.1.9.9.383.1.2.34 | ScalarcidsAlertLogAttackerPacketsAct | accessible-for-notify | current | Indicates that packets associated with the attacker(s) identified by this alert are being logged. This element may be omitted if and only if its value is false. |
| 1.3.6.1.4.1.9.9.383.1.2.35 | ScalarcidsAlertLogVictimPacketsAct | accessible-for-notify | current | Indicates that packets associated with the victim(s) identified by this alert are being logged. This element may be omitted if and only if its value is false. |
| 1.3.6.1.4.1.9.9.383.1.2.36 | ScalarcidsAlertLogPairPacketsActivated | accessible-for-notify | current | Indicates that packets associated with the attacker/victim pair(s) identified by this alert are being logged. This element may be omitted if and only if its va… |
| 1.3.6.1.4.1.9.9.383.1.2.37 | ScalarcidsAlertRateLimitRequested | accessible-for-notify | current | Indicates that traffic rate limiting based on the source address and protocol associated with the alert has been requested on external network devices. This el… |
| 1.3.6.1.4.1.9.9.383.1.2.38 | ScalarcidsAlertDeniedAttackVictimPair | accessible-for-notify | current | Indicates that traffic from originating from the attackers address and destined for the victims address identified in the alert is being denied as a result of … |
| 1.3.6.1.4.1.9.9.383.1.2.39 | ScalarcidsAlertDeniedAttackSericePair | accessible-for-notify | current | Indicates that traffic from originating from the attackers address and destined for the destination service port identified in the alert is being denied as a r… |
| 1.3.6.1.4.1.9.9.383.1.2.40 | ScalarcidsAlertDenyAttackVicReqNotPerf | accessible-for-notify | current | Indicates that traffic from originating from the attackers address and destined for the victims address identified in the alert would have been denied as a res… |
| 1.3.6.1.4.1.9.9.383.1.2.41 | ScalarcidsAlertDenyAttackSerReqNotPerf | accessible-for-notify | current | Indicates that traffic from originating from the attackers address and destined for the destination service port identified in the alert would have been denied… |
| 1.3.6.1.4.1.9.9.383.1.2.42 | ScalarcidsAlertThreatValueRating | accessible-for-notify | current | Value that represents the calculated threat associated with the detected activity. The threat value consists of the cidsAlertEventRiskRating adjusted for the m… |
| 1.3.6.1.4.1.9.9.383.1.2.43 | ScalarcidsAlertRiskRatingTargetValue | accessible-for-notify | current | Represents the asset value associated with a target identified in the alert. |
| 1.3.6.1.4.1.9.9.383.1.2.44 | ScalarcidsAlertRiskRatingRelevance | accessible-for-notify | current | Value that represents an attack's relevance to the destination target of this alert. |
| 1.3.6.1.4.1.9.9.383.1.2.45 | ScalarcidsAlertRiskRatingWatchList | accessible-for-notify | current | Value that represents the amount that the risk rating value was increased due to the source of the activity associated with the alert being on a watchlist. |
| 1.3.6.1.4.1.9.9.383.1.2.46 | ScalarcidsAlertDenyPacket | accessible-for-notify | current | This object indicates that the traffic originating from the attacker is being blocked as a result of the alert. This element may be omitted if and only if its … |
| 1.3.6.1.4.1.9.9.383.1.2.47 | ScalarcidsAlertBlockHost | accessible-for-notify | current | This object indicates that a host has been requested to be blocked as a result of the alert. This element may be omitted if and only if its value is 'false'. |
| 1.3.6.1.4.1.9.9.383.1.2.48 | ScalarcidsAlertTcpOneWayResetSent | accessible-for-notify | current | This object indicates an attempt to reset one side of the connection (the victim side). The victim address and ports affected must be implied from the informat… |
| 1.3.6.1.4.1.9.9.383.1.2.49 | ScalarcidsAlertVirtualSensor | accessible-for-notify | current | This object represents the name of the virtual sensor associated with an Intrusion Prevention System alert. From the virtual sensor name one can correlate whic… |
| 1.3.6.1.4.1.9.9.383.1.3 | NodecidsError | |||
| 1.3.6.1.4.1.9.9.383.1.3.1 | ScalarcidsErrorSeverity | accessible-for-notify | current | Severity of an error (warning, error or fatal for example). An example of a type of error that could occur would be when a requested action could not be comple… |
| 1.3.6.1.4.1.9.9.383.1.3.2 | ScalarcidsErrorName | accessible-for-notify | current | An enumerated error code, which identifies a general class of errors. |
| 1.3.6.1.4.1.9.9.383.1.3.3 | ScalarcidsErrorMessage | accessible-for-notify | current | A textual description of the error that occurred. |
| 1.3.6.1.4.1.9.9.383.1.4 | NodecidsHealth | |||
| 1.3.6.1.4.1.9.9.383.1.4.1 | ScalarcidsHealthPacketLoss | read-only | current | The percentage of packets lost at the device interface level. |
| 1.3.6.1.4.1.9.9.383.1.4.2 | ScalarcidsHealthPacketDenialRate | read-only | current | The percentage of packets denied due to protocol and security violations. |
| 1.3.6.1.4.1.9.9.383.1.4.3 | ScalarcidsHealthAlarmsGenerated | read-only | current | The number of alarms generated, includes all currently defined alarm severities. |
| 1.3.6.1.4.1.9.9.383.1.4.4 | ScalarcidsHealthFragmentsInFRU | read-only | current | The number of fragments currently queued in the fragment reassembly unit. |
| 1.3.6.1.4.1.9.9.383.1.4.5 | ScalarcidsHealthDatagramsInFRU | read-only | current | The number of datagrams currently queued in the fragment reassembly unit. |
| 1.3.6.1.4.1.9.9.383.1.4.6 | ScalarcidsHealthTcpEmbryonicStreams | read-only | current | The number of embryonic TCP streams currently queued in the device. TCP streams are considered embryonic if they have not completed the TCP three-way handshake. |
| 1.3.6.1.4.1.9.9.383.1.4.7 | ScalarcidsHealthTCPEstablishedStreams | read-only | current | The number of established TCP streams currently queued in the device. Once a stream has completed a TCP three-way handshake it will move to the established sta… |
| 1.3.6.1.4.1.9.9.383.1.4.8 | ScalarcidsHealthTcpClosingStreams | read-only | current | The number of closing TCP streams currently queued in the device. A stream will move from the established state to closing when a valid FIN or RST flag is rece… |
| 1.3.6.1.4.1.9.9.383.1.4.9 | ScalarcidsHealthTcpStreams | read-only | current | The number of TCP streams (embryonic, established and closing) currently queued in the device. |
| 1.3.6.1.4.1.9.9.383.1.4.10 | ScalarcidsHealthActiveNodes | read-only | current | The number of active nodes currently queued in the device. |
| 1.3.6.1.4.1.9.9.383.1.4.11 | ScalarcidsHealthTcpDualIpAndPorts | read-only | current | The number TCP nodes keyed on both IP addresses and both ports currently queued in the device. |
| 1.3.6.1.4.1.9.9.383.1.4.12 | ScalarcidsHealthUdpDualIpAndPorts | read-only | current | The number UDP nodes keyed on both IP addresses and both ports currently queued in the device. |
| 1.3.6.1.4.1.9.9.383.1.4.13 | ScalarcidsHealthIpDualIp | read-only | current | The number IP nodes keyed on both IP addresses currently queued in the device. |
| 1.3.6.1.4.1.9.9.383.1.4.14 | ScalarcidsHealthIsSensorMemoryCritical | read-only | current | A value between 0 and 10 that should rarely get above 3. If this is non-zero the sensor has stopped enforcing policy on some traffic in order to keep up with t… |
| 1.3.6.1.4.1.9.9.383.1.4.15 | ScalarcidsHealthIsSensorActive | read-only | current | Indicates the failover status of the device. True indicates the device is currently active. False indicates it is in a standby mode. |
| 1.3.6.1.4.1.9.9.383.1.4.16 | ScalarcidsHealthCommandAndControlPort | read-only | current | The status and network statistics of the currently configured Command and Control interface on the device. The Command and Control interface is where all of th… |
| 1.3.6.1.4.1.9.9.383.1.4.17 | ScalarcidsHealthSensorStatsResetTime | read-only | current | The value of SNMPv2-MIB::sysUpTime when the Sensor specific statistics was reset. The reset time is collectively for the following objects: cidsHealthPacketLos… |
| 1.3.6.1.4.1.9.9.383.1.4.18 | ScalarcidsHealthSecMonAvailability | read-only | current | This object indicates the availability of health and security monitor statistics. If the IPS health and security monitoring service is disabled, it will return… |
| 1.3.6.1.4.1.9.9.383.1.4.19 | ScalarcidsHealthSecMonOverallHealth | read-only | current | This object indicates IPS sensor's overall health value - green, yellow or red. The overall health status is set to the highest severity of all metrics that ar… |
| 1.3.6.1.4.1.9.9.383.1.4.20 | ScalarcidsHealthSecMonSoftwareVersion | read-only | current | This object indicates the IPS software version number (e.g., 6.2(1)E3). This object is instantiated only if the value of cidsHealthSecMonAvailability is set to… |
| 1.3.6.1.4.1.9.9.383.1.4.21 | ScalarcidsHealthSecMonSignatureVersion | read-only | current | This object indicates IPS signature version (e.g., 365.0). This object is instantiated only if the value of cidsHealthSecMonAvailability is set to 'true'. |
| 1.3.6.1.4.1.9.9.383.1.4.22 | ScalarcidsHealthSecMonLicenseStatus | read-only | current | This object indicates IPS license status along with expiration date. For example it will contain the following possible values: - signatureUpdateKey: Not expir… |
| 1.3.6.1.4.1.9.9.383.1.4.23 | ScalarcidsHealthSecMonOverallAppColor | accessible-for-notify | current | This object indicates the aggregate health status of the applications - Main, Analysis Engine, Collaboration - where the status is equal to the most severe sta… |
| 1.3.6.1.4.1.9.9.383.1.4.24 | ScalarcidsHealthSecMonMainAppStatus | read-only | current | This object indicates the running status for the control plane. This object is instantiated only if the value of cidsHealthSecMonAvailability is set to 'true'. |
| 1.3.6.1.4.1.9.9.383.1.4.25 | ScalarcidsHealthSecMonAnalysisEngineStatus | read-only | current | This object indicates the running status for the Analysis Engine. This object is instantiated only if the value of cidsHealthSecMonAvailability is set to 'true… |
| 1.3.6.1.4.1.9.9.383.1.4.26 | ScalarcidsHealthSecMonCollaborationAppStatus | read-only | current | This object indicates the running status for the Collaboration Application. This object is instantiated only if the value of cidsHealthSecMonAvailability is se… |
| 1.3.6.1.4.1.9.9.383.1.4.27 | ScalarcidsHealthSecMonByPassMode | accessible-for-notify | current | This object indicates the bypass mode. A value of 'true' indicates bypass mode is on and a value of 'false' indicates it is off. This object is instantiated on… |
| 1.3.6.1.4.1.9.9.383.1.4.28 | ScalarcidsHealthSecMonMissedPktPctAndThresh | read-only | current | This object indicates the missed packet percentage and missed packets percentage threshold aggregated for all interfaces. For example, 'missedPacketPercentage=… |
| 1.3.6.1.4.1.9.9.383.1.4.29 | ScalarcidsHealthSecMonAnalysisEngMemPercent | read-only | current | This object indicates the percentage of memory used by Analysis Engine. This object is instantiated only if the value of cidsHealthSecMonAvailability is set to… |
| 1.3.6.1.4.1.9.9.383.1.4.30 | ScalarcidsHealthSecMonSensorLoad | read-only | current | This object indicates sensor inspection load. This object is instantiated only if the value of cidsHealthSecMonAvailability is set to 'true'. |
| 1.3.6.1.4.1.9.9.383.1.4.31 | ScalarcidsHealthSecMonSensorLoadColor | accessible-for-notify | current | This object indicates the status of current sensor load, indicated using status colors. The color is determined based on the sensor load percentage and configu… |
| 1.3.6.1.4.1.9.9.383.1.4.32 | TablecidsHealthSecMonVirtSensorStatusTable | not-accessible | current | This table contains the status of each virtual sensor. There will be one entry per virtual sensor in the system. This is the status of the network that the vir… |
| 1.3.6.1.4.1.9.9.383.1.4.32.1 | RowcidsHealthSecMonVirtSensorStatusEntry | not-accessible | current | An entry (conceptual row) in the cidsHealthSecMonVirtSensorStatusTable. There will be one per virtual sensor on the system. A virtual sensor allows one to logi… |
| 1.3.6.1.4.1.9.9.383.1.4.32.1.1 | ColumncidsHealthSecMonVirtSensorName | not-accessible | current | This object represents the name of the virtual sensor. Through the IPS configuration the sensor name can be correlated with the sensor configuration and the as… |
| 1.3.6.1.4.1.9.9.383.1.4.32.1.2 | ColumncidsHealthSecMonVirtSensorStatus | read-only | current | This object represents the virtual sensor network status level. From the color rating associated with the virtual sensor you can determine the overall health o… |
| 1.3.6.1.4.1.9.9.383.1.4.33 | TablecidsHealthSecMonDataStorageTable | not-accessible | current | This is the table of disk partition details: Partition Name Total Space In Partition Utilized Space This table tells how each of the file systems are utilized … |
| 1.3.6.1.4.1.9.9.383.1.4.33.1 | RowcidsHealthSecMonDataStorageEntry | not-accessible | current | An entry (conceptual row) in the cidsHealthSecMonDataStorageTable. There will be one row per partition. This table is here to track the health of the storage o… |
| 1.3.6.1.4.1.9.9.383.1.4.33.1.1 | ColumncidsHealthSecMonPartitionName | not-accessible | current | Name of the disk partition. For example: system application-data boot application-log |
| 1.3.6.1.4.1.9.9.383.1.4.33.1.2 | ColumncidsHealthSecMonTotalPartitionSpace | read-only | current | This object represents the total disk space on the partition in megabytes. |
| 1.3.6.1.4.1.9.9.383.1.4.33.1.3 | ColumncidsHealthSecMonUtilizedPartitionSpace | read-only | current | This object represents the total amount of utilized disk space in megabytes. |
| 1.3.6.1.4.1.9.9.383.2 | NodeciscoCidsMIBConform | |||
| 1.3.6.1.4.1.9.9.383.2.1 | NodeciscoCidsMIBCompliances | |||
| 1.3.6.1.4.1.9.9.383.2.1.1 | ComplianceciscoCidsMIBCompliance | deprecated | The compliance statement for entities which implement the Cids MIB | |
| 1.3.6.1.4.1.9.9.383.2.1.2 | ComplianceciscoCidsMIBComplianceRev1 | deprecated | The compliance statement for entities which implement the Cids MIB | |
| 1.3.6.1.4.1.9.9.383.2.1.3 | ComplianceciscoCidsMIBComplianceRev2 | deprecated | The compliance statement for entities which implement the Cids MIB | |
| 1.3.6.1.4.1.9.9.383.2.1.4 | ComplianceciscoCidsMIBComplianceRev3 | deprecated | The compliance statement for entities which implement the Cids MIB | |
| 1.3.6.1.4.1.9.9.383.2.1.5 | ComplianceciscoCidsMIBComplianceRev4 | current | The compliance statement for entities which implement the Cids MIB | |
| 1.3.6.1.4.1.9.9.383.2.2 | NodeciscoCidsMIBGroups | |||
| 1.3.6.1.4.1.9.9.383.2.2.1 | GroupciscoCidsGeneralObjectGroup | deprecated | General Objects. | |
| 1.3.6.1.4.1.9.9.383.2.2.2 | GroupciscoCidsAlertObjectGroup | deprecated | Alert Objects. | |
| 1.3.6.1.4.1.9.9.383.2.2.3 | GroupciscoCidsErrorObjectGroup | current | Error Objects. | |
| 1.3.6.1.4.1.9.9.383.2.2.4 | GroupciscoCidsNotificationsGroup | current | The notifications which are required. | |
| 1.3.6.1.4.1.9.9.383.2.2.5 | GroupciscoCidsHealthObjectGroup | current | Health Objects. | |
| 1.3.6.1.4.1.9.9.383.2.2.6 | GroupciscoCidsGeneralObjectGroupRev1 | current | General Objects. | |
| 1.3.6.1.4.1.9.9.383.2.2.7 | GroupciscoCidsAlertObjectGroupRev1 | current | Alert Objects. | |
| 1.3.6.1.4.1.9.9.383.2.2.8 | GroupciscoCidsOptionalObjectGroup | deprecated | Optional Objects. | |
| 1.3.6.1.4.1.9.9.383.2.2.9 | GroupciscoCidsOptionalObjectGroupRev1 | current | Optional Objects. | |
| 1.3.6.1.4.1.9.9.383.2.2.10 | GroupciscoCidsOptionalObjectGroupRev2 | current | A collection of optional objects which provide sensor events and alerts information. | |
| 1.3.6.1.4.1.9.9.383.2.2.11 | GroupciscoCidsAlertObjectGroupRev2 | current | A collection of objects that provide sensor alert information. | |
| 1.3.6.1.4.1.9.9.383.2.2.12 | GroupciscoCidsHealthObjectGroupRev1 | current | A collection of objects that provide sensor health status. | |
| 1.3.6.1.4.1.9.9.383.2.2.13 | GroupciscoCidsOptionalObjectGroupRev3 | current | A collection of optional objects which provide sensor events and alerts information. | |
| 1.3.6.1.4.1.9.9.383.2.2.14 | GroupciscoCidsNotificationsGroupRev1 | current | A collection of objects that provide sensor health and metric change related trap information. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CidsApplicationStatus | INTEGER { notResponding(1), notRunning(2), processingTransaction(3), reconfiguring(4), running(5), starting(6), stopping(7), unknown(8), upgradeInprogress(9) } | current | An enumerated value which identifies the status values that are possible for a process. notResponding The process is no longer responding and may be down. notRunning The process is not currently running. processingTrans… |
| CidsAttackRelevance | INTEGER { relevant(1), notRelevant(2), unknown(3) } | current | An enumerated value which identifies an attack's relevance to its target. relevant The attack is relevant to the target. notRelevant The attack is not relevant to the target. unknown The relevancy of the attack is unkno… |
| CidsErrorCode | INTEGER { errAuthenticationTokenExpired(1), errConfigCollision(2), errInUse(3), errInvalidDocument(4), errLimitExceeded(5), errNotAvailable(6), errNotFound(7), errNotSupported(8), errPermissionDenied(9), errSyslog(10), errSystemError(11), errTransport(12), errUnacceptableValue(13), errUnclassified(14), errWarning(15), errEngineBuildFailed(16) } | current | An enumerated value which identifies the general category of error that occurred. errAuthenticationTokenExpired The requested action could not be carried out because the requestor has provided an authentication token (e… |
| CidsHealthStatusColor | INTEGER { green(1), yellow(2), red(3) } | current | An enumerated value which identifies the status colors for health related statistics. The colors are chosen since they are commonly used in health dashboards when visualizing the status of a component and should general… |
| CidsTargetValue | INTEGER { zeroValue(1), low(2), medium(3), high(4), missionCritical(5) } | current | An enumerated value which identifies the asset value associated with a target. zeroValue Target has zero perceived value to the network. low Target has low perceived value to the network. medium Target has medium percei… |