CISCO-CONFIG-COPY-MIB
48 objects
Added ccCopyVrfName attribute to support VPN config copy in ccCopyTable
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-ST-TC | FcNameIdOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.96 | IdentityciscoConfigCopyMIB | Added ccCopyVrfName attribute to support VPN config copy in ccCopyTable | ||
| 1.3.6.1.4.1.9.9.96.1 | NodeciscoConfigCopyMIBObjects | |||
| 1.3.6.1.4.1.9.9.96.1.1 | NodeccCopy | |||
| 1.3.6.1.4.1.9.9.96.1.1.1 | TableccCopyTable | not-accessible | current | A table of config-copy requests. |
| 1.3.6.1.4.1.9.9.96.1.1.1.1 | RowccCopyEntry | not-accessible | current | A config-copy request. A management station wishing to create an entry should first generate a random serial number to be used as the index to this sparse tabl… |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.1 | ColumnccCopyIndex | not-accessible | current | Object which specifies a unique entry in the ccCopyTable. A management station wishing to initiate a config-copy operation should use a random value for this o… |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.2 | ColumnccCopyProtocol | read-create | current | The protocol to be used for any copy. If the copy operation occurs locally on the SNMP agent (e.g. 'runningConfig' to 'startupConfig'), this object may be igno… |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.3 | ColumnccCopySourceFileType | read-create | current | Specifies the type of file to copy from. Either the ccCopySourceFileType or the ccCopyDestFileType (or both) must be of type 'runningConfig' or 'startupConfig'… |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.4 | ColumnccCopyDestFileType | read-create | current | specifies the type of file to copy to. Either the ccCopySourceFileType or the ccCopyDestFileType (or both) must be of type 'runningConfig' or 'startupConfig'. … |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.5 | ColumnccCopyServerAddress | read-create | deprecated | The IP address of the TFTP server from (or to) which to copy the configuration file. This object must be created when either the ccCopySourceFileType or ccCopy… |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.6 | ColumnccCopyFileName | read-create | current | The file name (including the path, if applicable) of the file. This object must be created when either the ccCopySourceFileType or ccCopyDestFileType has the v… |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.7 | ColumnccCopyUserName | read-create | current | Remote username for copy via FTP, RCP, SFTP or SCP protocol. This object must be created when the ccCopyProtocol is 'rcp', 'scp', 'ftp', or 'sftp'. If the prot… |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.8 | ColumnccCopyUserPassword | read-create | current | Password used by FTP, SFTP or SCP for copying a file to/from an FTP/SFTP/SCP server. This object must be created when the ccCopyProtocol is FTP or SCP. Reading… |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.9 | ColumnccCopyNotificationOnCompletion | read-create | current | Specifies whether or not a ccCopyCompletion notification should be issued on completion of the TFTP transfer. If such a notification is desired, it is the resp… |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.10 | ColumnccCopyState | read-only | current | Specifies the state of this config-copy request. This value of this object is instantiated only after the row has been instantiated, i.e. after the ccCopyEntry… |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.11 | ColumnccCopyTimeStarted | read-only | current | Specifies the time the ccCopyState last transitioned to 'running', or 0 if the state has never transitioned to 'running'(e.g., stuck in 'waiting' state). This … |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.12 | ColumnccCopyTimeCompleted | read-only | current | Specifies the time the ccCopyState last transitioned from 'running' to 'successful' or 'failed' states. This object is instantiated only after the row has been… |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.13 | ColumnccCopyFailCause | read-only | current | The reason why the config-copy operation failed. This object is instantiated only when the ccCopyState for this entry is in the 'failed' state. |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.14 | ColumnccCopyEntryRowStatus | read-create | current | The status of this table entry. Once the entry status is set to active, the associated entry cannot be modified until the request completes (ccCopyState transi… |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.15 | ColumnccCopyServerAddressType | read-create | current | This object indicates the transport type of the address contained in ccCopyServerAddressRev1 object. This must be created when either the ccCopySourceFileType … |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.16 | ColumnccCopyServerAddressRev1 | read-create | current | The IP address of the TFTP server from (or to) which to copy the configuration file. This object must be created when either the ccCopySourceFileType or ccCopy… |
| 1.3.6.1.4.1.9.9.96.1.1.1.1.17 | ColumnccCopyVrfName | read-create | current | This object specifies the VPN domain in which the server identified by ccCopyServerAddress or ccCopyServerAddressRev1 is located. The agent will use this field… |
| 1.3.6.1.4.1.9.9.96.1.1.2 | TableccCopyErrorTable | not-accessible | current | A table containing information about the failure cause of the config copy operation. An entry is created only when the value of ccCopyState changes to 'failed'… |
| 1.3.6.1.4.1.9.9.96.1.1.2.1 | RowccCopyErrorEntry | not-accessible | current | An entry containing information about the outcome at one destination of a failed config copy operation. |
| 1.3.6.1.4.1.9.9.96.1.1.2.1.1 | ColumnccCopyErrorIndex | not-accessible | current | A monotonically increasing integer for the sole purpose of indexing entries in this table. When a config copy operation has multiple destinations, then this in… |
| 1.3.6.1.4.1.9.9.96.1.1.2.1.2 | ColumnccCopyErrorDeviceIpAddressType | read-only | current | The type of Internet address for this destination device on which config copy operation is performed. |
| 1.3.6.1.4.1.9.9.96.1.1.2.1.3 | ColumnccCopyErrorDeviceIpAddress | read-only | current | The IP address of this destination device on which config copy operation is performed. The object value has to be consistent with the type specified in ccCopyE… |
| 1.3.6.1.4.1.9.9.96.1.1.2.1.4 | ColumnccCopyErrorDeviceWWN | read-only | current | The World Wide Name (WWN) of this destination device on which config copy operation is performed. The value of this object is zero-length string if WWN is unas… |
| 1.3.6.1.4.1.9.9.96.1.1.2.1.5 | ColumnccCopyErrorDescription | read-only | current | The error description for the error happened for this destination of this config copy operation. |
| 1.3.6.1.4.1.9.9.96.2 | NodeciscoConfigCopyMIBTrapPrefix | |||
| 1.3.6.1.4.1.9.9.96.2.1 | NodeccCopyMIBTraps | |||
| 1.3.6.1.4.1.9.9.96.2.1.1 | NotificationccCopyCompletion | current | A ccCopyCompletion trap is sent at the completion of a config-copy request. The ccCopyFailCause is not instantiated, and hence not included in a trap, when the… | |
| 1.3.6.1.4.1.9.9.96.3 | NodeciscoConfigCopyMIBConformance | |||
| 1.3.6.1.4.1.9.9.96.3.1 | NodeccCopyMIBCompliances | |||
| 1.3.6.1.4.1.9.9.96.3.1.1 | ComplianceccCopyMIBCompliance | deprecated | The compliance statement for Cisco agents which implement the Cisco ConfigCopy MIB. This MIB should be implemented on all Cisco agents that support copying of … | |
| 1.3.6.1.4.1.9.9.96.3.1.2 | ComplianceccCopyMIBComplianceRev1 | deprecated | The compliance statement for Cisco agents which implement the Cisco ConfigCopy MIB. This MIB should be implemented on all Cisco agents that support copying of … | |
| 1.3.6.1.4.1.9.9.96.3.1.3 | ComplianceccCopyMIBComplianceRev2 | deprecated | The compliance statement for Cisco agents which implement the Cisco ConfigCopy MIB. This MIB should be implemented on all Cisco agents that support copying of … | |
| 1.3.6.1.4.1.9.9.96.3.1.4 | ComplianceccCopyMIBComplianceRev3 | current | The compliance statement for Cisco agents which implement the Cisco ConfigCopy MIB. This MIB should be implemented on all Cisco agents that support copying of … | |
| 1.3.6.1.4.1.9.9.96.3.2 | NodeccCopyMIBGroups | |||
| 1.3.6.1.4.1.9.9.96.3.2.1 | GroupccCopyGroup | deprecated | A collection of objects providing the ability to copy an agent-configuration file. This Group is deprecated and new group is defined. | |
| 1.3.6.1.4.1.9.9.96.3.2.2 | GroupccCopyNotificationsGroup | current | The notification used to indicate that a config-copy operation to or from the agent has been completed. | |
| 1.3.6.1.4.1.9.9.96.3.2.3 | GroupccCopyGroupRev1 | current | A collection of objects providing the ability to copy an agent-configuration file. This group deprecates the old group ccCopyGroup. | |
| 1.3.6.1.4.1.9.9.96.3.2.4 | GroupccCopyErrorGroup | current | A collection of objects providing the result of a config copy operation when the value of ccCopyDestFileType is 'fabricStartupConfig' and value of ccCopyState … | |
| 1.3.6.1.4.1.9.9.96.3.2.5 | GroupccCopyGroupVpn | current | Additional collection of object providing the ability to copy an agent-configuration file. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ConfigCopyFailCause | INTEGER { unknown(1), badFileName(2), timeout(3), noMem(4), noConfig(5), unsupportedProtocol(6), someConfigApplyFailed(7), systemNotReady(8), requestAborted(9) } | current | The reason a config-copy request failed. unknown: very descriptive. badFileName: check your file name/path/permissions. timeout: the network may be overloaded, or the remote file server may not be responding. noMem: the… |
| ConfigCopyProtocol | INTEGER { tftp(1), ftp(2), rcp(3), scp(4), sftp(5) } | current | The protocol file transfer protocol that should be used to copy the configuration file over the network. If the config file transfer is to occur locally on the SNMP agent, the method of transfer is left up to the implem… |
| ConfigCopyState | INTEGER { waiting(1), running(2), successful(3), failed(4) } | current | The state of a TFTP config-copy operation. The description of each state is given below: waiting: only one config-copy request can run at any time. A newly activated config-copy request is placed in this state if anothe… |
| ConfigFileType | INTEGER { networkFile(1), iosFile(2), startupConfig(3), runningConfig(4), terminal(5), fabricStartupConfig(6) } | current | The various types of files on which a config-copy operation can be performed. networkFile: file on another network device, e.g. a file-server on the network. iosFile: a file on the local agent, other than startup or run… |