MIB Viewer

CISCO-CONFIG-MAN-MIB

64 objects
Configuration management MIB. The MIB represents a model of configuration data that exists in various locations: running in use by the running system terminal operator's mind or attached hardware local saved locally in NVRAM or flash remote saved to some server on the network Although some of the system functions that relate here can be used for general file storage and transfer, this MIB intends to include only such operations as clearly relate to configuration. Its primary emphasis is to track changes and saves of the running configuration. As saved data moves further from startup use, such as into different local flash files or onto the network, tracking becomes difficult to impossible, so the MIB's interest and functions are confined in that area. Information from ccmCLIHistoryCommandTable can be used to track the exact configuration changes that took place within a particular Configuration History event. NMS' can use this information to update the related components. For example: If commands related only to MPLS are entered then the NMS need to update only the MPLS related management information rather than updating all of its management information. Acronyms and terms: CLI Command Line Interface.
Imported Objects
CISCO-SMIciscoMgmt
CISCO-TCUnsigned64
INET-ADDRESS-MIBInetAddress InetAddressType
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDateAndTime DisplayString TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.9.43IdentityciscoConfigManMIBConfiguration management MIB. The MIB represents a model of configuration data that exists in various locations: running in use by the running system terminal …
1.3.6.1.4.1.9.9.43.1NodeciscoConfigManMIBObjects
1.3.6.1.4.1.9.9.43.1.1NodeccmHistory
1.3.6.1.4.1.9.9.43.1.1.1ScalarccmHistoryRunningLastChangedread-onlycurrentThe value of sysUpTime when the running configuration was last changed. If the value of ccmHistoryRunningLastChanged is greater than ccmHistoryRunningLastSaved…
1.3.6.1.4.1.9.9.43.1.1.2ScalarccmHistoryRunningLastSavedread-onlycurrentThe value of sysUpTime when the running configuration was last saved (written). If the value of ccmHistoryRunningLastChanged is greater than ccmHistoryRunningL…
1.3.6.1.4.1.9.9.43.1.1.3ScalarccmHistoryStartupLastChangedread-onlycurrentThe value of sysUpTime when the startup configuration was last written to. In general this is the default configuration used when cold starting the system. It …
1.3.6.1.4.1.9.9.43.1.1.4ScalarccmHistoryMaxEventEntriesread-onlycurrentThe maximum number of entries that can be held in ccmHistoryEventTable. The recommended value for implementations is 10.
1.3.6.1.4.1.9.9.43.1.1.5ScalarccmHistoryEventEntriesBumpedread-onlycurrentThe number of times the oldest entry in ccmHistoryEventTable was deleted to make room for a new entry.
1.3.6.1.4.1.9.9.43.1.1.6TableccmHistoryEventTablenot-accessiblecurrentA table of configuration events on this router.
1.3.6.1.4.1.9.9.43.1.1.6.1RowccmHistoryEventEntrynot-accessiblecurrentInformation about a configuration event on this router.
1.3.6.1.4.1.9.9.43.1.1.6.1.1ColumnccmHistoryEventIndexnot-accessiblecurrentA monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the…
1.3.6.1.4.1.9.9.43.1.1.6.1.2ColumnccmHistoryEventTimeread-onlycurrentThe value of sysUpTime when the event occurred.
1.3.6.1.4.1.9.9.43.1.1.6.1.3ColumnccmHistoryEventCommandSourceread-onlycurrentThe source of the command that instigated the event.
1.3.6.1.4.1.9.9.43.1.1.6.1.4ColumnccmHistoryEventConfigSourceread-onlycurrentThe configuration data source for the event.
1.3.6.1.4.1.9.9.43.1.1.6.1.5ColumnccmHistoryEventConfigDestinationread-onlycurrentThe configuration data destination for the event.
1.3.6.1.4.1.9.9.43.1.1.6.1.6ColumnccmHistoryEventTerminalTyperead-onlycurrentIf ccmHistoryEventCommandSource is 'commandLine', the terminal type, otherwise 'notApplicable'.
1.3.6.1.4.1.9.9.43.1.1.6.1.7ColumnccmHistoryEventTerminalNumberread-onlycurrentIf ccmHistoryEventCommandSource is 'commandLine', the terminal number. The value is -1 if not available or not applicable.
1.3.6.1.4.1.9.9.43.1.1.6.1.8ColumnccmHistoryEventTerminalUserread-onlycurrentIf ccmHistoryEventCommandSource is 'commandLine', the name of the logged in user. The length is zero if not available or not applicable.
1.3.6.1.4.1.9.9.43.1.1.6.1.9ColumnccmHistoryEventTerminalLocationread-onlycurrentIf ccmHistoryEventCommandSource is 'commandLine', the hard-wired location of the terminal or the remote host for an incoming connection. The length is zero if …
1.3.6.1.4.1.9.9.43.1.1.6.1.10ColumnccmHistoryEventCommandSourceAddressread-onlydeprecatedIf ccmHistoryEventTerminalType is 'virtual', the internet address of the connected system. If ccmHistoryEventCommandSource is 'snmp', the internet address of t…
1.3.6.1.4.1.9.9.43.1.1.6.1.11ColumnccmHistoryEventVirtualHostNameread-onlycurrentIf ccmHistoryEventTerminalType is 'virtual', the host name of the connected system. The length is zero if not available or not applicable.
1.3.6.1.4.1.9.9.43.1.1.6.1.12ColumnccmHistoryEventServerAddressread-onlydeprecatedIf ccmHistoryEventConfigSource or ccmHistoryEventConfigDestination is 'networkTftp' or 'networkRcp', the internet address of the storage file server. The value…
1.3.6.1.4.1.9.9.43.1.1.6.1.13ColumnccmHistoryEventFileread-onlycurrentIf ccmHistoryEventConfigSource or ccmHistoryEventConfigDestination is 'networkTftp' or 'networkRcp', the configuration file name at the storage file server. Th…
1.3.6.1.4.1.9.9.43.1.1.6.1.14ColumnccmHistoryEventRcpUserread-onlycurrentIf ccmHistoryEventConfigSource or ccmHistoryEventConfigDestination is 'networkRcp', the remote user name. The length is zero if not applicable or not available.
1.3.6.1.4.1.9.9.43.1.1.6.1.15ColumnccmHistoryCLICmdEntriesBumpedread-onlycurrentThe number of times the oldest entry in ccmCLIHistoryCommandTable with first index as ccmHistoryEventIndex was deleted to make room for a new entry. This objec…
1.3.6.1.4.1.9.9.43.1.1.6.1.16ColumnccmHistoryEventCommandSourceAddrTyperead-onlycurrentThis object indicates the transport type of the address contained in ccmHistoryEventCommandSourceAddrRev1. The value will be zero if not available or not appli…
1.3.6.1.4.1.9.9.43.1.1.6.1.17ColumnccmHistoryEventCommandSourceAddrRev1read-onlycurrentIf ccmHistoryEventTerminalType is 'virtual', the internet address of the connected system. If ccmHistoryEventCommandSource is 'snmp', the internet address of t…
1.3.6.1.4.1.9.9.43.1.1.6.1.18ColumnccmHistoryEventServerAddrTyperead-onlycurrentThis object indicates the transport type of the address contained in ccmHistoryEventServerAddrRev1. The value will be zero if not available or not aplicable.
1.3.6.1.4.1.9.9.43.1.1.6.1.19ColumnccmHistoryEventServerAddrRev1read-onlycurrentIf ccmHistoryEventConfigSource or ccmHistoryEventConfigDestination is 'networkTftp' or 'networkRcp', the internet address of the storage file server. The value…
1.3.6.1.4.1.9.9.43.1.2NodeccmCLIHistory
1.3.6.1.4.1.9.9.43.1.2.1ScalarccmCLIHistoryMaxCmdEntriesread-writecurrentThe maximum number of entries that can be held in ccmCLIHistoryCommandTable. The recommended value for implementations is 100. If the number of entries in ccmC…
1.3.6.1.4.1.9.9.43.1.2.2ScalarccmCLIHistoryCmdEntriesread-onlycurrentThe current number of entries in ccmCLIHistoryCommandTable.
1.3.6.1.4.1.9.9.43.1.2.3ScalarccmCLIHistoryCmdEntriesAllowedread-onlycurrentThis object indicates the upper limit on the number of entries allowed in ccmCLIHistoryCommandTable by the managed system.
1.3.6.1.4.1.9.9.43.1.2.4TableccmCLIHistoryCommandTablenot-accessiblecurrentA table of CLI commands that took effect during configuration events.
1.3.6.1.4.1.9.9.43.1.2.4.1RowccmCLIHistoryCommandEntrynot-accessiblecurrentInformation about the CLI commands that took effect during the configuration event pointed by ccmCLIHistoryEventIndex. A set of rows in this table having the f…
1.3.6.1.4.1.9.9.43.1.2.4.1.1ColumnccmCLIHistoryCommandIndexnot-accessiblecurrentA monotonically increasing integer for the purpose of indexing CLI commands which took effect during a configuration event.
1.3.6.1.4.1.9.9.43.1.2.4.1.2ColumnccmCLIHistoryCommandread-onlycurrentThe CLI command entered which took effect during the configuration event pointed by ccmHistoryEventIndex.
1.3.6.1.4.1.9.9.43.1.3NodeccmCLICfg
1.3.6.1.4.1.9.9.43.1.3.1ScalarccmCLICfgRunConfNotifEnableread-writecurrentThis variable indicates whether the system produces the ccmCLIRunningConfigChanged notification. A false value will prevent notifications from being generated …
1.3.6.1.4.1.9.9.43.1.4NodeccmCTIDObjects
1.3.6.1.4.1.9.9.43.1.4.1ScalarccmCTIDread-onlycurrentThis object indicates the Config Change Tracking ID which uniquely represents version-incrementing changes to the IOS running configuration.
1.3.6.1.4.1.9.9.43.1.4.2ScalarccmCTIDLastChangeTimeread-onlycurrentThis object indicates the time when the Config Change Tracking ID last changed.
1.3.6.1.4.1.9.9.43.1.4.3ScalarccmCTIDWhoChangedread-onlycurrentThis object indicates the user who last reset the Config Change Tracking ID.
1.3.6.1.4.1.9.9.43.1.4.4ScalarccmCTIDRolledOverNotifEnableread-writecurrentThis variable indicates whether the system produces the ccmCTIDRolledOver notification. A false value will prevent notifications from being generated by this s…
1.3.6.1.4.1.9.9.43.2NodeciscoConfigManMIBNotificationPrefix
1.3.6.1.4.1.9.9.43.2.0NodeciscoConfigManMIBNotifications
1.3.6.1.4.1.9.9.43.2.0.1NotificationciscoConfigManEventcurrentNotification of a configuration management event as recorded in ccmHistoryEventTable.
1.3.6.1.4.1.9.9.43.2.0.2NotificationccmCLIRunningConfigChangedcurrentThis notification indicates that the running configuration of the managed system has changed from the CLI. If the managed system supports a separate configurat…
1.3.6.1.4.1.9.9.43.2.0.3NotificationccmCTIDRolledOvercurrentThis notification indicates that the Config Change Tracking ID has rolled over and will be reset.
1.3.6.1.4.1.9.9.43.3NodeciscoConfigManMIBConformance
1.3.6.1.4.1.9.9.43.3.1NodeciscoConfigManMIBCompliances
1.3.6.1.4.1.9.9.43.3.1.1ComplianceciscoConfigManMIBCompliancedeprecatedThe compliance statement for entities which implement the Cisco Configuration Management MIB
1.3.6.1.4.1.9.9.43.3.1.2ComplianceciscoConfigManMIBComplianceRev2deprecatedThe compliance statement for entities which implement the Cisco Configuration Management MIB
1.3.6.1.4.1.9.9.43.3.1.3ComplianceciscoConfigManMIBComplianceRev3deprecatedThe compliance statement for entities which implement the Cisco Configuration Management MIB. This compliance module deprecates ciscoConfigManMIBCompliance.
1.3.6.1.4.1.9.9.43.3.1.4ComplianceciscoConfigManMIBComplianceRev4currentThe compliance statement for entities which implement the Cisco Configuration Management MIB. This compliance module deprecates ciscoConfigManMIBCompliance.
1.3.6.1.4.1.9.9.43.3.2NodeciscoConfigManMIBGroups
1.3.6.1.4.1.9.9.43.3.2.1GroupciscoConfigManHistoryGroupdeprecatedConfiguration history.
1.3.6.1.4.1.9.9.43.3.2.2GroupciscoConfigManHistoryGroupRev1deprecatedConfiguration history.
1.3.6.1.4.1.9.9.43.3.2.3GroupciscoConfigManHistNotifyGroupcurrentNotifications of a configuration management event.
1.3.6.1.4.1.9.9.43.3.2.4GroupciscoConfigManCLIHistCmdGroupcurrentCLI commands entered during a configuration history event.
1.3.6.1.4.1.9.9.43.3.2.5GroupciscoConfigManHistoryGroupRev2currentConfiguration history. This group deprecates the old group ciscoConfigManHistoryGroupRev1
1.3.6.1.4.1.9.9.43.3.2.6GroupciscoConfigManCTIDNotifyGroupcurrentNotifications of a Config Change Tracking ID event.
1.3.6.1.4.1.9.9.43.3.2.7GroupciscoConfigManCTIDObjectGroupcurrentInformation about the current CTID value, when CTID last changed, and who last changed the CTID.
Type Definitions
NameSyntaxStatusDescription
HistoryEventMediumINTEGER { erase(1), commandSource(2), running(3), startup(4), local(5), networkTftp(6), networkRcp(7), networkFtp(8), networkScp(9) }currentThe source or destination of a configuration change, save, or copy. erase erasing destination (source only) running live operational data commandSource the command source itself startup what the system will use next reb…