CISCO-COPS-CLIENT-MIB
41 objects
This MIB module is for configuration & statistic query of Common Open Policy Service(COPS) client feature on the Cisco device. COPS is a simple client/server model for supporting policy control over QoS Signaling Protocols and provisioned QoS resource management. COPS is a simple query and response protocol that can be used to exchange policy information between a policy server (Policy Decision Point or PDP) and its clients (Policy Enforcement Points or PEPs).
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.140 | IdentityciscoCopsClientMIB | This MIB module is for configuration & statistic query of Common Open Policy Service(COPS) client feature on the Cisco device. COPS is a simple client/server m… | ||
| 1.3.6.1.4.1.9.9.140.1 | NodeccopsMIBObjects | |||
| 1.3.6.1.4.1.9.9.140.1.1 | NodeccopsGlobalObjects | |||
| 1.3.6.1.4.1.9.9.140.1.1.1 | ScalarccopsServerMax | read-only | current | Maximum number of configurable COPS servers allowed for each client type. A value of zero indicates no limitation on the number of configurable COPS servers. |
| 1.3.6.1.4.1.9.9.140.1.1.2 | ScalarccopsMaxRole | read-only | current | Indicates the maximum number of roles supported by this device. A value of zero indicates no limitation on the number of roles. |
| 1.3.6.1.4.1.9.9.140.1.1.3 | ScalarccopsMaxRoleCombination | read-only | current | Indicates the maximum number of role-combinations supported by this device. A value of zero indicates no limitation on the number of role-combinations. Each Co… |
| 1.3.6.1.4.1.9.9.140.1.1.4 | TableccopsServerConfigTable | not-accessible | current | A list of possible COPS servers that the COPS client will try to connect to in order of ccopsServerConfigPriority. |
| 1.3.6.1.4.1.9.9.140.1.1.4.1 | RowccopsServerConfigEntry | not-accessible | current | A set of configuration information regarding a single COPS server from the point of view of a COPS client. The entry is created and deleted by using ccopsServe… |
| 1.3.6.1.4.1.9.9.140.1.1.4.1.1 | ColumnccopsServerConfigClientType | not-accessible | current | The type of policies to be retrieved from this server. |
| 1.3.6.1.4.1.9.9.140.1.1.4.1.2 | ColumnccopsServerConfigName | not-accessible | current | The IP address or the hostname of a COPS server. If a hostname is used, it will be resolved to an address prior to each attempt to setup a connection to a PDP.… |
| 1.3.6.1.4.1.9.9.140.1.1.4.1.3 | ColumnccopsServerConfigPriority | read-create | current | The priority of this entry relative to other entries. The COPS client will attempt to contact COPS servers for the appropriate Client-Type in the order of thei… |
| 1.3.6.1.4.1.9.9.140.1.1.4.1.4 | ColumnccopsServerConfigPort | read-create | current | The destination port number to which COPS server messages should be sent. By default the COPS service will be provided on the well-known COPS protocol port num… |
| 1.3.6.1.4.1.9.9.140.1.1.4.1.5 | ColumnccopsServerConfigStatus | read-create | current | The status of COPS server configuration for a client type. An entry may not exist in the active state unless all objects in the entry have an appropriate value… |
| 1.3.6.1.4.1.9.9.140.1.1.5 | ScalarccopsInitialTimeout | read-write | current | If the device can not connect to the last connected COPS server, it uses this value for the initial retry time-out and then retries to connect after this time-… |
| 1.3.6.1.4.1.9.9.140.1.1.6 | ScalarccopsTimeoutIncrement | read-write | current | On every consecutive failure to connect to all existing COPS server for a client type, the COPS client increases the retry time-out by ccopsTimeoutIncrement bu… |
| 1.3.6.1.4.1.9.9.140.1.1.7 | ScalarccopsTimeoutMax | read-write | current | The maximum retry time-out that the COPS client allows. On every consecutive failure to connect to all COPS servers, the COPS client increases the retry time-o… |
| 1.3.6.1.4.1.9.9.140.1.1.8 | TableccopsDomainTable | not-accessible | current | A list of COPS domains for each client type supported in the device. |
| 1.3.6.1.4.1.9.9.140.1.1.8.1 | RowccopsDomainEntry | not-accessible | current | A set of domain configuration information regarding a single COPS client type. An entry will exist for each COPS client type which is supported in the device. … |
| 1.3.6.1.4.1.9.9.140.1.1.8.1.1 | ColumnccopsDomainClientType | not-accessible | current | The type of COPS client. |
| 1.3.6.1.4.1.9.9.140.1.1.8.1.2 | ColumnccopsDomainName | read-write | current | The COPS domain which this client type belongs to. This is so that a COPS server supporting multiple domains can push the correct set of domain policies to thi… |
| 1.3.6.1.4.1.9.9.140.1.1.9 | TableccopsRoleTable | not-accessible | current | A list of roles. The number of entries is determined by ccopsMaxRole. |
| 1.3.6.1.4.1.9.9.140.1.1.9.1 | RowccopsRoleEntry | not-accessible | current | Entry containing COPS-PR role information. The entry is created, deleted and modified by using ccopsRoleStatus. There is a maximum on the number of roles which… |
| 1.3.6.1.4.1.9.9.140.1.1.9.1.1 | ColumnccopsRoleName | not-accessible | current | The name of the role. Only roles which were defined in COPS server should be used. COPS server will only supply the policies for those roles defined in its dat… |
| 1.3.6.1.4.1.9.9.140.1.1.9.1.2 | ColumnccopsRoleStatus | read-create | current | This object is used to manage creation, deletion and modification of rows in this table. An entry may not exist in the active state unless all objects in the e… |
| 1.3.6.1.4.1.9.9.140.1.1.10 | TableccopsIfTable | not-accessible | current | A list of interface entries. An entry will exist for each interface which supports COPS-PR feature. |
| 1.3.6.1.4.1.9.9.140.1.1.10.1 | RowccopsIfEntry | not-accessible | current | Entry containing COPS status for a particular interface. By default each interface has no roles. It then has a role combination that is the zero length string.… |
| 1.3.6.1.4.1.9.9.140.1.1.10.1.1 | ColumnccopsIfRoleCombination | read-write | current | A display string, role combination, that is associated with an interface. This is the administratively-desired role combination which represents roles that are… |
| 1.3.6.1.4.1.9.9.140.1.1.11 | ScalarccopsRoleConfigSupported | read-only | current | Indicates whether this device supports the ccopsMaxRole and ccopsRoleTable, and thereby, whether a role must be present in the ccopsRoleTable before it can be … |
| 1.3.6.1.4.1.9.9.140.2 | NodeccopsMIBNotifications | |||
| 1.3.6.1.4.1.9.9.140.3 | NodeccopsMIBConformance | |||
| 1.3.6.1.4.1.9.9.140.3.1 | NodeccopsMIBCompliances | |||
| 1.3.6.1.4.1.9.9.140.3.1.1 | ComplianceccopsMIBCompliance | deprecated | The compliance statement for the CISCO-COPS-CLIENT-MIB. | |
| 1.3.6.1.4.1.9.9.140.3.1.2 | ComplianceccopsMIBComplianceRev2 | current | The compliance statement for the CISCO-COPS-CLIENT-MIB. | |
| 1.3.6.1.4.1.9.9.140.3.2 | NodeccopsMIBGroups | |||
| 1.3.6.1.4.1.9.9.140.3.2.1 | GroupccopsGlobalGroup | deprecated | A collection of objects providing the COPS ability on the device. Devices implementing the COPS client feature should support this group. | |
| 1.3.6.1.4.1.9.9.140.3.2.2 | GroupccopsGlobalGroupRev2 | current | A collection of objects providing the COPS ability on the device. | |
| 1.3.6.1.4.1.9.9.140.3.2.3 | GroupccopsRoleGroup | current | A collection of objects which allow an agent to require a limited set of allowed roles be specified, and to reject any role-combination containing any other ro… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CopsClientType | INTEGER { rsvp(1), provisioning(2) } | current | An enumerated value for all the supported COPS client type. rsvp(1) Resource Reservation Protocol(RSVP). RSVP is a signaling mechanism that the applications will use to signal parameters to the network, so that network … |
| CopsDomainName | OCTET STRING (SIZE (0..31)) | current | A display string where valid letters are a-z, A-Z, 0-9, ., - and _. Name can not start with an '_'. The COPS domain which a COPS client type belongs to. This is so that a COPS server supporting multiple domains can push… |
| CopsRole | OCTET STRING (SIZE (1..31)) | current | A display string where valid letters are a-z, A-Z, 0-9, ., - and _. Name can not start with an '_'. Policies are assigned to a 'role', and one or more 'roles' are assigned to interfaces, such that an interface takes on … |
| CopsRoleCombination | OCTET STRING (SIZE (0..255)) | current | A display string consisting of a set of roles concatenated with '+' characters where the roles are in lexicographic order from minimum to maximum. Policies are assigned to a 'role', and one or more 'roles' are assigned … |