MIB Viewer

CISCO-CPRI-MIB

35 objects
This MIB module defines the managed objects for physical layer characteristics of cpri interfaces and performance statistics objects for protocol specific counters in falidae devices. Glossary: TX : Transmit RX : Receive
Imported Objects
CISCO-SMIciscoMgmt
IF-MIBifIndex ifName
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString MacAddress RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.9.9999IdentityciscoCpriMIBThis MIB module defines the managed objects for physical layer characteristics of cpri interfaces and performance statistics objects for protocol specific coun…
1.3.6.1.4.1.9.9.9999.0NodeciscoCpriMIBNotifs
1.3.6.1.4.1.9.9.9999.1NodeciscoCpriMIBObjects
1.3.6.1.4.1.9.9.9999.1.1NodecoiCpriController
1.3.6.1.4.1.9.9.9999.1.1.1TablecoiCpriControllerTablenot-accessiblecurrentThis table provides management information for cpri layer related attributes of interfaces with an ifType of cpri
1.3.6.1.4.1.9.9.9999.1.1.1.1RowcoiCpriControllerEntrynot-accessiblecurrentAn entry containing management information on cpri layer related attributes of interfaces with an ifType cpri. Entries are created by the feature when a new in…
1.3.6.1.4.1.9.9.9999.1.1.1.1.1ColumncoiCpriControllerSupportedRateListread-onlycurrentThis object gives the current supported rate list of the cpri controller, valid values are : rate614Mbps(0): CPRI option 1 - 614 Mbps rate1228Mbps(1): CPRI opt…
1.3.6.1.4.1.9.9.9999.1.1.1.1.2ColumncoiCpriControllerConfiguredRateListread-onlycurrentThis object gives the current configured rate list of the cpri controller. Maximum 4 values can be configured at a time on a port. Valid values are : rate614Mb…
1.3.6.1.4.1.9.9.9999.1.1.1.1.3ColumncoiCpriControllerNegotiatedRateread-onlycurrentThis object gives the current negotiated rate of the cpri controller, valid values are - rateNone(0): No valid negotiated rate rate614Mbps(1): The negotiated r…
1.3.6.1.4.1.9.9.9999.1.1.1.1.4ColumncoiCpriControllerPortRoleread-onlycurrentThis object gives the role of the cpri controller, valid values are - slave(0): The port mode is slave master(1): The port mode is master
1.3.6.1.4.1.9.9.9999.1.1.1.1.5ColumncoiCpriControllerL1StartupTimerread-onlycurrentThis object is gives the L1 Startup Timer value of the cpri controller (in terms of milliseconds).
1.3.6.1.4.1.9.9.9999.1.1.1.1.6ColumncoiCpriControllerAdminStatusread-onlycurrentThis object gives the administration status of the cpri interfaces. when it is set to down(0), it results in Tx being stopped and there should be corresponding…
1.3.6.1.4.1.9.9.9999.1.1.1.1.7ColumncoiCpriControllerOperStatusread-onlycurrentThis object gives the current operational state of the cpri controller, valid values are - down(0): The controller is in down state. up(1): The controller is i…
1.3.6.1.4.1.9.9.9999.1.1.1.1.8ColumncoiCpriControllerLoopbackInforead-onlycurrentThis object gives the loopback value of the cpri controller, valid values are - loopbackNone(0): No controller loopback info loopbackLine(1): The controller lo…
1.3.6.1.4.1.9.9.9999.1.1.1.1.9ColumncoiCpriControllerAlarmStatusread-onlycurrentThis object indicates the current defect status of the cpri controller. Valid values are - noAlarm(0): No Alarm. This bit will be set when none of the followin…
1.3.6.1.4.1.9.9.9999.1.2NodecoiCpriRoeStats
1.3.6.1.4.1.9.9.9999.1.2.1NodecoiCpriRoeStatsTable
1.3.6.1.4.1.9.9.9999.1.2.1.1ScalarcoiCpriRoeStatsEntrynot-accessiblecurrentAn entry containing stas information on CPRI controller ROE port.
1.3.6.1.4.1.9.9.9999.1.2.1.1.1ScalarcoiCpriRoeRxFramesread-onlycurrentThis object gives the number of RoE frames received.
1.3.6.1.4.1.9.9.9999.1.2.1.1.2ScalarcoiCpriRoeDroppedFramesDetectedread-onlycurrentThis object gives the number of RoE frames dropped.
1.3.6.1.4.1.9.9.9999.1.2.1.1.3ScalarcoiCpriRoeStrayFramesDetectedread-onlycurrentThis object gives the number of RoE stray frame detected.
1.3.6.1.4.1.9.9.9999.1.2.1.1.4ScalarcoiCpriRoeDuplicateFramesDetectedread-onlycurrentThis object gives the number of RoE duplicate frame detected.
1.3.6.1.4.1.9.9.9999.1.2.1.1.5ScalarcoiCpriRoeOutOfSeqFramesDetectedread-onlycurrentThis object gives the number of RoE out of sequence frame detected.
1.3.6.1.4.1.9.9.9999.1.2.1.1.6ScalarcoiCpriRoeOutOfSeqFramesDroppedread-onlycurrentThis object gives the number of RoE out of sequence frames dropped.
1.3.6.1.4.1.9.9.9999.1.2.1.1.7ScalarcoiCpriRoeTxFramesread-onlycurrentThis object gives the number of RoE frames transmitted.
1.3.6.1.4.1.9.9.9999.1.2.1.1.8ScalarcoiCpriRoeIdleFramesSentread-onlycurrentThis object gives the number of idle frames sent.
1.3.6.1.4.1.9.9.9999.1.2.1.1.9ScalarcoiCpriRoePktDelayVarMinValread-onlycurrentThis object gives the RoE packet-delay-variation min value.
1.3.6.1.4.1.9.9.9999.1.2.1.1.10ScalarcoiCpriRoePktDelayVarMaxValread-onlycurrentThis object gives the RoE packet-delay-variation max value.
1.3.6.1.4.1.9.9.9999.1.2.1.1.11ScalarcoiCpriRoePktDelayVarAvgValread-onlycurrentThis object gives the RoE packet-delay-variation avg value.
1.3.6.1.4.1.9.9.9999.1.2.1.1.12ScalarcoiCpriRoeLineCodeViolationDetectedread-onlycurrentThis object gives the number of line-code-violation-detected on CPRI link.
1.3.6.1.4.1.9.9.9999.1.2.1.1.13ScalarcoiCpriRoeLineCodeViolationPropagatedread-onlycurrentThis object gives the number of line-code-violation-propagated on CPRI link.
1.3.6.1.4.1.9.9.9999.1.2.1.1.14ScalarcoiCpriRoeErroredLengthFramesread-onlycurrentThis object gives the number of RoE errored-length-frames value.
1.3.6.1.4.1.9.9.9999.2NodeciscoCpriMIBConformance
1.3.6.1.4.1.9.9.9999.2.1NodeciscoCpriMIBCompliances
1.3.6.1.4.1.9.9.9999.2.2NodeciscoCpriMIBGroups
MIB Viewer