MIB Viewer

CISCO-DEVICE-LOCATION-MIB

50 objects
This MIB is used for managing location information of end point devices(Telepresence, IP Camera, Digital media player etc) connected to switches/routers. This location information is then carried from the switch/router to the end point via Cisco Discovery protocol (CDP) or Link Layer Discovery protocol (LLDP). The location information can be used by applications such as Cisco Video Surveillance Manager, digital media manager. Civic location information as described in RFC 4676, identifies the exact location information like state, city, building, floor that helps identify the exact location of the devices. Definitions: ============ LocationTarget: This is identified by a target type (interface, IP session) and target identifier (ifIndex, IP address). MIB Table Overview: =================== This MIB consists of five tables: 1) cdlLocationTable 2) cdlCivicAddrLocationTable 3) cdlCustomLocationTable 4) cdlGeoLocationTable 5) cdlLocationPreferWeightTable The cdlLocationTable provides information about location information of LocationTarget. cdlCivicAddrLocationTable provides the details about the civic address types like state, county, city for a given LocationTarget. cdlCustomLocationTable provides the ability to associate arbitrary name/value pairs with a LocationTarget. This allows for specification of information which is not currently included into the standard definition of Civic address types. cdlGeoLocationTable provides Geolocation (GPS) coordinate information for a LocationType. cdlLocationPreferWeightTable provides information about, and a method for configuring, the order in which the system makes use of location information which is provided by different sources. The following provides a sample view of the contents of the table and the relationship between them. cdlLocationTable Location Sub Country Target Target Index TypeCap Code Type Identifier - 1 Civic Addr 01 Interface 1 | 2 Civic Addr 01 Interface 2 | | | cdlCivicAddrLocationTable | | Location Location Location | Index Type Index Value | |_ _ _ _ 1 1 - State Karnataka |_ _ _ _ 1 2 - County Bangalore District |_ _ _ _ 1 3 - city Bangalore 2 1 - State Kerala 2 2 - County Waynad District 2 3 - city Waynad
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.9.732IdentityciscoDeviceLocationMIBThis MIB is used for managing location information of end point devices(Telepresence, IP Camera, Digital media player etc) connected to switches/routers. This …
1.3.6.1.4.1.9.9.732.0NodecdlMIBNotifications
1.3.6.1.4.1.9.9.732.1NodecdlMIBObjects
1.3.6.1.4.1.9.9.732.1.1NodecdlMIBScalars
1.3.6.1.4.1.9.9.732.1.1.1ScalarcdlKeyread-writecurrentA proprietary key to validate the application requiring access to the rest of the objects in this MIB. A read operation on this object would return NULL string.
1.3.6.1.4.1.9.9.732.1.2TablecdlLocationTablenot-accessiblecurrentThis table lists different LocationTargets and associated location attributes (such as country code). The information in this table MUST be stored in non-volat…
1.3.6.1.4.1.9.9.732.1.2.1RowcdlLocationEntrynot-accessiblecurrentAn entry describes the location attributes required to be configured for every LocationTarget in a device. An entry is created in this table when an interface …
1.3.6.1.4.1.9.9.732.1.2.1.1ColumncdlLocationIndexnot-accessiblecurrentIdentifies the unique index assigned to a given LocationTarget. A LocationTarget is defined by cdlLocationTargetType and cdlLocationTargetIdentifier.
1.3.6.1.4.1.9.9.732.1.2.1.2ColumncdlLocationSubTypeCapabilityread-onlycurrentThis object specifies the location subtypes that can be supported by a given LocationTarget. Following is the list of subtypes: noSubtypesConfigured(0) 0x0 - N…
1.3.6.1.4.1.9.9.732.1.2.1.3ColumncdlLocationCountryCoderead-writecurrentCountry code information applicable to a given LocationTarget
1.3.6.1.4.1.9.9.732.1.2.1.4ColumncdlLocationTargetTyperead-onlycurrentThis object specifies the target type. The following are the possible values. interface(1) - The interface could be a physical interface or a virtual/logical i…
1.3.6.1.4.1.9.9.732.1.2.1.5ColumncdlLocationTargetIdentifierread-onlycurrentThis object specifies a unique identifier for a given cdlLocationTargetType in a given device. If the cdlLocationTargetType is set to 'interface', then the ide…
1.3.6.1.4.1.9.9.732.1.3TablecdlCivicAddrLocationTablenot-accessiblecurrentThis table lists civic address information of end point devices. This table has a sparse dependant relationship with cdlLocationTable. The information in this …
1.3.6.1.4.1.9.9.732.1.3.1RowcdlCivicAddrLocationEntrynot-accessiblecurrentAn entry in this table specifies civic address location information. One or more entries could be created for every entry in cdlLocationEntry with cdlLocationS…
1.3.6.1.4.1.9.9.732.1.3.1.1ColumncdlCivicAddrLocationTypenot-accessiblecurrentThis object specifies the location types that can be configured/unconfigured on a LocationTarget. The following are all the possible types and a brief explanat…
1.3.6.1.4.1.9.9.732.1.3.1.2ColumncdlCivicAddrLocationValueread-createcurrentThis object specifies the civic address value for a given cdlCivicAddrLocationType. For Example: If cdlCivicAddrLocationType is of type 'building' then the str…
1.3.6.1.4.1.9.9.732.1.3.1.3ColumncdlCivicAddrLocationStorageTyperead-createcurrentThis object specifies the storage type for this conceptual row.
1.3.6.1.4.1.9.9.732.1.3.1.4ColumncdlCivicAddrLocationStatusread-createcurrentThis object will follow RowStatus Textual convention to create/destroy entries. The following columnar object is mandatory to make the entry 'active': cdlCivic…
1.3.6.1.4.1.9.9.732.1.4TablecdlCustomLocationTablenot-accessiblecurrentThis table lists 'Custom' address information of end point devices, giving 'name' and 'value' pairs. This table has a sparse dependent relationship with cdlLoc…
1.3.6.1.4.1.9.9.732.1.4.1RowcdlCustomLocationEntrynot-accessiblecurrentAn entry in this table specifies 'Custom' address location information consisting of 'Name' and associated 'Value' pairs. One or more entries could be created …
1.3.6.1.4.1.9.9.732.1.4.1.1ColumncdlCustomLocationNamenot-accessiblecurrentThis object specifies the 'Custom' address 'Name' for a given cdlCustomLocationEntry. The character string may contain space characters. Examples would be 'Dep…
1.3.6.1.4.1.9.9.732.1.4.1.2ColumncdlCustomLocationValueread-createcurrentThis object specifies the 'Custom' address 'Value' for a given cdlCustomLocationEntry. For Example: If the cdlCustomLocationName were 'Department' then the 'Va…
1.3.6.1.4.1.9.9.732.1.4.1.3ColumncdlCustomLocationStorageTyperead-createcurrentThis object specifies the storage type for this conceptual row.
1.3.6.1.4.1.9.9.732.1.4.1.4ColumncdlCustomLocationStatusread-createcurrentThis object will follow RowStatus Textual convention to create/destroy entries. The following columnar objects are mandatory to make the entry 'active': cdlCus…
1.3.6.1.4.1.9.9.732.1.5TablecdlGeoLocationTablenot-accessiblecurrentThis table lists Geographic address information of end point devices. This table has a sparse dependent relationship with cdlLocationTable. The information in …
1.3.6.1.4.1.9.9.732.1.5.1RowcdlGeoLocationEntrynot-accessiblecurrentAn entry in this table specifies Geographic location information. An entry in this table is appropriate for any LocationEntry which has the cdlLocationSubTypeC…
1.3.6.1.4.1.9.9.732.1.5.1.1ColumncdlGeoLatituderead-createcurrentThis object specifies latitude of the end point device in degrees. An empty string means that latitude is not configured for this row.
1.3.6.1.4.1.9.9.732.1.5.1.2ColumncdlGeoLatitudeResolutionread-createcurrentThis object specifies latitude resolution of the end point device in meters. This allows for specification of latitude resolution separately from other dimensi…
1.3.6.1.4.1.9.9.732.1.5.1.3ColumncdlGeoLongituderead-createcurrentThis object specifies longitude of the end point device in degrees. An empty string means that longitude is not configured for this row.
1.3.6.1.4.1.9.9.732.1.5.1.4ColumncdlGeoLongitudeResolutionread-createcurrentThis object specifies longitude resolution of the end point device in meters. This allows for specification of longitude resolution separately from other dimen…
1.3.6.1.4.1.9.9.732.1.5.1.5ColumncdlGeoAltituderead-createcurrentThis object specifies altitude of the end point device in units, as specified in cdlGeoAltitudeType. An empty string means that altitude is not configured for …
1.3.6.1.4.1.9.9.732.1.5.1.6ColumncdlGeoAltitudeTyperead-createcurrentThis object specifies the Geographic Location Altitude types which may be configured on a LocationTarget. The following are all the possible types as specified…
1.3.6.1.4.1.9.9.732.1.5.1.7ColumncdlGeoAltitudeResolutionread-createcurrentThis object specifies altitude resolution of the end point device in the same units as that which cdlGeoAltitudeType specifies. This allows for specification o…
1.3.6.1.4.1.9.9.732.1.5.1.8ColumncdlGeoResolutionread-createcurrentThis object specifies resolution of the end point device in meters. A resolution specified here will apply to latitude and longitude.
1.3.6.1.4.1.9.9.732.1.5.1.9ColumncdlGeoStorageTyperead-createcurrentThis object specifies the storage type for this conceptual row.
1.3.6.1.4.1.9.9.732.1.5.1.10ColumncdlGeoStatusread-createcurrentThis object will follow RowStatus Textual convention to create/destroy entries. The following columnar objects are mandatory to make the entry 'active': cdlGeo…
1.3.6.1.4.1.9.9.732.1.6TablecdlLocationPreferWeightTablenot-accessiblecurrentThis table lists the preference weights which are to be given to location information according the source of the information. Each possible source for locatio…
1.3.6.1.4.1.9.9.732.1.6.1RowcdlLocationPreferWeightEntrynot-accessiblecurrentAn entry in this table specifies the Weight which is assigned to a particular source of Location information. All weight 'Value' fields need not add to 100. Lo…
1.3.6.1.4.1.9.9.732.1.6.1.1ColumncdlLocationPreferWeightTypenot-accessiblecurrentThis object specifies the Location source weight type. The following source types are represented: static(1) - Statically configured via CLI or SNMP locp(2) - …
1.3.6.1.4.1.9.9.732.1.6.1.2ColumncdlLocationPreferWeightValueread-writecurrentThis object specifies the Weight to assign to a particular source of Location information. All weight 'Value' fields need not add to 100. Location information …
1.3.6.1.4.1.9.9.732.2NodecdlMIBConform
1.3.6.1.4.1.9.9.732.2.1NodecdlMIBCompliances
1.3.6.1.4.1.9.9.732.2.1.1CompliancecdlMIBComplianceread-onlydeprecatedThe compliance statement for entities which implement the CISCO-DEVICE-LOCATION-MIB.
1.3.6.1.4.1.9.9.732.2.1.2CompliancecdlMIBComplianceRev1read-onlycurrentThe compliance statement for entities which implement the CISCO-DEVICE-LOCATION-MIB.
1.3.6.1.4.1.9.9.732.2.2NodecdlMIBGroups
1.3.6.1.4.1.9.9.732.2.2.1GroupcdlLocationGroupcurrentA collection of location objects.
1.3.6.1.4.1.9.9.732.2.2.2GroupcdlCivicAddrLocationGroupcurrentA collection of civic address location objects.
1.3.6.1.4.1.9.9.732.2.2.3GroupcdlCustomLocationGroupcurrentA collection of Custom location information objects.
1.3.6.1.4.1.9.9.732.2.2.4GroupcdlGeoLocationGroupcurrentA collection of Geographic location information objects.
1.3.6.1.4.1.9.9.732.2.2.5GroupcdlLocationPreferWeightGroupcurrentA collection of location source preference objects.