CISCO-DMN-DSG-MOIP-MIB
44 objects
Cisco MOIP MIB.
Imported Objects
| CISCO-DMN-DSG-ROOT-MIB | ciscoDSGUtilities |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1429.2.2.5.35 | IdentityciscoDSGMOIP | Cisco MOIP MIB. | ||
| 1.3.6.1.4.1.1429.2.2.5.35.1 | NodemoipIPOTable | |||
| 1.3.6.1.4.1.1429.2.2.5.35.1.1 | TablemoipIPOConfigTable | not-accessible | current | MOIP IP Output Table. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1 | RowmoipIPOConfigEntry | not-accessible | current | Entry for DPM Aligned PMT table. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.1 | ColumnmoipIPOConfigID | read-only | current | MPEG Over IP Output Instance ID . |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.2 | ColumnmoipIPOConfigOutputEnabled | read-write | current | MPEG Over IP Output is enabled. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.3 | ColumnmoipIPOConfigInstanceName | read-write | current | MPEG Over IP Output Name. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.4 | ColumnmoipIPOConfigTPProtocol | read-write | current | Transport Protocol to be used: UDP/ RPT. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.5 | ColumnmoipIPOConfigIPVer | read-only | current | Internet Protocol version of the destination IP address:IPv4/IPv6. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.6 | ColumnmoipIPOConfigDestIPAddr | read-write | current | MPEG Over IP Destination IP Address. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.7 | ColumnmoipIPOConfigSAPMulticastIPAddr | read-write | current | MPEG Over IP Destination IP Address. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.8 | ColumnmoipIPOConfigDestPort | read-write | current | Source UDP Port - 0 allows automatic Port Selection, enter a value to override.. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.9 | ColumnmoipIPOConfigSrcPort | read-write | current | Source UDP Port - 0 allows automatic Port Selection, enter a value to override.. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.10 | ColumnmoipIPOConfigMinIPPerSec | read-write | current | Minimum Number of IP Packets to be sent per second. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.11 | ColumnmoipIPOConfigPCRAddition | read-write | current | Program Clock Reference Addition. This OID is read only on D9824, D9854-i and D9859 |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.12 | ColumnmoipIPOConfigPCRStartNewPkt | read-write | current | Enabling new Ethernet Packet when new Program Clock Reference arrives. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.13 | ColumnmoipIPOConfigSendSAP | read-write | current | Send SAP Messages. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.14 | ColumnmoipIPOConfigUseSAPStr | read-write | current | User Configured SAP String or PE1 SDT Channel name as the Transport Name in the SAP. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.15 | ColumnmoipIPOConfigMaxTransPktPerIP | read-write | current | Maximum Number of Transport Packets per IP Packet. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.16 | ColumnmoipIPOConfigSAPStr | read-write | current | User configured Session Announcement Protocol Transport Name to be used when DPMIPOConfigUseSAPStr is set to 'YES'. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.17 | ColumnmoipIPOConfigInterfaceMode | read-write | current | MPEG Over IP Output port selection. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.18 | ColumnmoipIPOConfigBitRate | read-write | current | Maxmum ASI output rate in Mbps with scaling factor of 6. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.19 | ColumnmoipIPOConfigTOS | read-write | current | TOS field in IP header. This is an 8 bits field divided into 5 sub-fields namely Precedence, D, T, R and Unused. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.20 | ColumnmoipIPOConfigTTL | read-write | current | Time to live. This is an 8 bits fiels that defines how many hops an IP datagram can travel through. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.21 | ColumnmoipIPOConfigSAPDestPort | read-write | current | SAP Destination Port Number. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.22 | ColumnmoipIPOFECMode | read-write | current | FEC Mode. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.23 | ColumnmoipIPOFECColDepth | read-write | current | FEC Column Depth (L Value). |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.24 | ColumnmoipIPOFECRowWidth | read-write | current | FEC Row Width (D Value). |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.25 | ColumnmoipIPOAnnexType | read-write | current | FEC arrangement : Non block-aligned (Annex A in Pro-MPEG FEC, Annex B in SMPTE 2022), Block-aligned (Annex B in Pro-MPEG FEC, Annex C in SMPTE-2022). |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.26 | ColumnmoipIPOFEC1UDPPort | read-write | current | UDP Port for FEC Columns Stream in step of 2. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.1.1.27 | ColumnmoipIPOFEC2UDPPort | read-write | current | UDP Port for FEC Rows Stream in step of 2. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.2 | TablemoipIPOStreamStatusTable | not-accessible | current | MOIP IP Output Table. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.2.1 | RowmoipIPOStreamStatusEntry | not-accessible | current | Entry for DPM Aligned PMT table. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.2.1.1 | ColumnmoipIPOStreamStatusID | read-only | current | MPEG Over IP Output Instance ID . |
| 1.3.6.1.4.1.1429.2.2.5.35.1.2.1.2 | ColumnmoipIPOStreamStatusIntf1 | read-only | current | Stream Status, Ethernet Port 1. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.2.1.3 | ColumnmoipIPOStreamStatusIntf2 | read-only | current | Stream Status, Ethernet Port 2. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.2.1.4 | ColumnmoipIPOStreamStatusContentOvfl | read-only | current | Content Overflow. |
| 1.3.6.1.4.1.1429.2.2.5.35.1.2.1.5 | ColumnmoipIPOStreamStatusLinkOvfl | read-only | current | Link Overflow. |
| 1.3.6.1.4.1.1429.2.2.5.35.2 | NodemoipIPOInfo | |||
| 1.3.6.1.4.1.1429.2.2.5.35.2.1 | ScalarmoipIPOStatsHWGlobalError | read-only | current | Critical MPEG over IP Engine Failure. |
| 1.3.6.1.4.1.1429.2.2.5.35.2.2 | ScalarmoipIPOStatsStreamError | read-only | current | MPEG over IP TS Overflow. |
| 1.3.6.1.4.1.1429.2.2.5.35.2.3 | ScalarmoipIPOStatsBandwidthConf | read-only | current | Combined User Rate (Mbps). |
| 1.3.6.1.4.1.1429.2.2.5.35.2.4 | ScalarmoipIPOStatsBandwidthActIntf1 | read-only | current | Actual Rate (Mbps), Ethernet Port 1. |
| 1.3.6.1.4.1.1429.2.2.5.35.2.5 | ScalarmoipIPOStatsBandwidthActIntf2 | read-only | current | Actual Rate (Mbps), Ethernet Port 2. |