CISCO-DMN-DSG-MOIPINPUT-MIB
44 objects
Cisco generic MOIP Input MIB.
Imported Objects
| CISCO-DMN-DSG-ROOT-MIB | ciscoDSGUtilities |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1429.2.2.5.41 | IdentityciscoDSGMOIPInput | Cisco generic MOIP Input MIB. | ||
| 1.3.6.1.4.1.1429.2.2.5.41.1 | NodemoipInputInfo | |||
| 1.3.6.1.4.1.1429.2.2.5.41.1.1 | ScalarmoipInputFlowIsMulticast | read-write | current | Delivery Type: Multicast or Unicast. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.2 | ScalarmoipInputFlowMulticastDstIPV4 | read-write | current | Muticast V4 IP Address. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.3 | ScalarmoipInputFlowFecMode | read-write | current | FEC Mode. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.4 | ScalarmoipInputFlowSrcFilter | read-write | current | Source Filtering Mode. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.5 | ScalarmoipInputFlowTsUDPPort | read-write | current | UDP Port for Transport Stream. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.6 | ScalarmoipInputFlowFec1UDPPort | read-write | current | UDP Port for FEC Columns Stream in step of 2. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.7 | ScalarmoipInputFlowFec2UDPPort | read-write | current | UDP Port for FEC Rows Stream in step of 2. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.8 | ScalarmoipInputFlowSrcStrmSel | read-write | current | Selects how to lock to source IP. In SwMap, first source present on both data ports is selected. In UserCfg, user selected source ip is locked per port. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.9 | ScalarmoipInputDejitterAlgorithm | read-write | current | Dejitter Algorithm. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.10 | ScalarmoipInputDejitterBufLatency | read-write | current | Dejitter Buffer Latency. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.11 | ScalarmoipInputRednMode | read-write | current | Input Redundancy Mode. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.12 | ScalarmoipInputRednDir | read-write | current | IPI Redundancy Switch Over Type. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.13 | ScalarmoipInputRednDelayDir | read-write | current | Direct Redundancy Switch Over Delay in msec. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.14 | ScalarmoipInputRednDelRev | read-write | current | Revertive Redundancy Switch Over Delay in sec. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.15 | ScalarmoipInputRednPortInUse | read-only | current | Redundancy: Port In use. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.16 | ScalarmoipInputRednSwReason | read-only | current | Reason for port Switch Over: None, Setup, EthLinkLoss, UdpLoss, PrgmLoss. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.17 | ScalarmoipInputRednSwDateTime | read-only | current | Redundancy: Switch Over date and time. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.18 | ScalarmoipInputData1SelIPV4 | read-write | current | Select this host for DATA1 port. This object replaces moipInputSrcSelectData1Sel for backup and restore purpose and should not be used by any UIs. |
| 1.3.6.1.4.1.1429.2.2.5.41.1.19 | ScalarmoipInputData2SelIPV4 | read-write | current | Select this host for DATA2 port. This object replaces moipInputSrcSelectData2Sel for backup and restore purpose and should not be used by any UIs. |
| 1.3.6.1.4.1.1429.2.2.5.41.2 | NodemoipInputTable | |||
| 1.3.6.1.4.1.1429.2.2.5.41.2.1 | TablemoipInputSrcSelectTable | not-accessible | current | MOIP input source IP select table. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.1.1 | RowmoipInputSrcSelectEntry | not-accessible | current | Entry for source IP select table. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.1 | ColumnmoipInputSrcSelectIdx | read-only | current | Host Index. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.2 | ColumnmoipInputSrcSelectV4IPAddr | read-only | current | Host IP Address. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.3 | ColumnmoipInputSrcSelectData1Sel | read-only | current | The host selected for DATA1 port. Use moipInputData1SelIPV4 to select. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.4 | ColumnmoipInputSrcSelectData2Sel | read-only | current | The host selected for DATA2 port. Use moipInputData2SelIPV4 to select. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.5 | ColumnmoipInputSrcSelectData1Avail | read-only | current | Stream from this host is present on DATA1 port. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.6 | ColumnmoipInputSrcSelectData2Avail | read-only | current | Stream from this host is present on DATA2 port. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.7 | ColumnmoipInputSrcSelectData1Enabled | read-only | current | This host can be selected for DATA1. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.8 | ColumnmoipInputSrcSelectData2Enabled | read-only | current | This host can be selected for DATA2. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.9 | ColumnmoipInputSrcSelectRowEnabled | read-only | current | Rows disabled should be hidden from user. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.2 | TablemoipInputSrcFilterTable | not-accessible | current | MOIP input source IP filter table. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.2.1 | RowmoipInputSrcFilterEntry | not-accessible | current | Entry for source IP filter table. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.2.1.1 | ColumnmoipInputSrcFilterIdx | read-only | current | Source IP Filter Index. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.2.1.2 | ColumnmoipInputSrcFilterV4IPAddr | read-write | current | Source IP to be filtered. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.2.1.3 | ColumnmoipInputSrcFilterRowStatus | read-write | current | Source Filter IP row status. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.3 | TablemoipInputFlowTable | not-accessible | current | DPM Configuration Table. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.3.1 | RowmoipInputFlowEntry | not-accessible | current | Entry for DPM global configuration table. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.3.1.1 | ColumnmoipInputFlowID | read-only | current | Flow ID. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.3.1.2 | ColumnmoipInputFlowTsAct | read-only | current | Flow Transport Stream Active. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.3.1.3 | ColumnmoipInputFlowFecColStrmAct | read-only | current | Flow FEC Column Stream Active. |
| 1.3.6.1.4.1.1429.2.2.5.41.2.3.1.4 | ColumnmoipInputFlowFecRowStrmAct | read-only | current | Flow FEC Row Stream Active. |