CISCO-DMN-DSG-TUNING-MIB
166 objects
Cisco DSG Tuning MIB.
Imported Objects
| CISCO-DMN-DSG-ROOT-MIB | ciscoDSGUtilities |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1429.2.2.5.5 | IdentityciscoDSGTuning | Cisco DSG Tuning MIB. | ||
| 1.3.6.1.4.1.1429.2.2.5.5.1 | NodeactiveTuning | |||
| 1.3.6.1.4.1.1429.2.2.5.5.1.1 | ScalaractiveTuningInput | read-write | current | Select Input for tuning. |
| 1.3.6.1.4.1.1429.2.2.5.5.1.2 | ScalaractiveTuningValidateOrbPos | read-write | current | Command used to validate orbital position. Set this object to yes( 2 ) to validate Orbital position. |
| 1.3.6.1.4.1.1429.2.2.5.5.1.3 | ScalaractiveTuningChScan | read-write | current | Channel Scan command. Setting scan( 1 ) triggers the channel scanning process. |
| 1.3.6.1.4.1.1429.2.2.5.5.2 | NodeactiveTuningTable | |||
| 1.3.6.1.4.1.1429.2.2.5.5.2.1 | TableactiveTunerTable | not-accessible | current | Active Tuner Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.1.1 | RowactiveTunerEntry | not-accessible | current | Entry for Active Tuner Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.1 | ColumnactiveTunerIndex | not-accessible | current | Active Tuner Index. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.2 | ColumnactiveTunerRFInput | read-write | current | Active Tuner RF Input. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.3 | ColumnactiveTunerFreq | read-write | current | The Satellite Downlink frequency in the range of 0 to 15000000 KHz in steps of 1 KHz. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.4 | ColumnactiveTunerSymbolRate | read-write | current | Data rate on the transport stream in millions of symbols per second. Range is from 10000 to 450000 hectoSym/second in steps of 1 hectoSym/second. ( 1 hecto = 1… |
| 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.5 | ColumnactiveTunerDVBSFEC | read-write | current | Forward Error Correction Rate. For DVB-S2 modulation only auto is applicable. For DVB-S modulation all options are applicable. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.6 | ColumnactiveTunerModulation | read-write | current | Signal Modulation type. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.7 | ColumnactiveTunerRollOff | read-write | current | Alpha filtering - for DVB-S: 0.20/0.35, for DVB-S2: 0.20/0.25/0.35. Roll off with scaling factor of 1/100. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.8 | ColumnactiveTunerIQ | read-write | current | Spectrum Inversion. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2 | TableactiveInputTable | not-accessible | current | Active Input Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1 | RowactiveInputEntry | not-accessible | current | Entry for Active Input Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.1 | ColumnactiveInputRFIndex | not-accessible | current | Selection of RF Input. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.2 | ColumnactiveInputLNBType | read-write | current | LNB Type: C-Band/Single Ku/Dual Ku/Advanced. For simplified setup select C-Band or Ku-Band. If there is a need to configure LO, select Advanced. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.3 | ColumnactiveInputLNBTrim | read-write | current | Low Noise Block Trim Level 1 when type is not advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.4 | ColumnactiveInputLNBTrim2 | read-write | current | Low Noise Block Trim Level 2 when type is not advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.5 | ColumnactiveInputLocalOscFreq1 | read-write | current | RW, only when LNB Type is Advanced. Local Oscillator #1 Frequency when type is advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.6 | ColumnactiveInputLocalOscFreq2 | read-write | current | RW, only when LNB Type is Advanced. Local Oscillator #2 Frequency when type is advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.7 | ColumnactiveInputCrossOver | read-write | current | Crossover Frequency for Local Oscillator. It has a range of 0 to 15000000 KHz in steps of 1KHz. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.8 | ColumnactiveInputLocalOscControl | read-write | current | 22KHz Local Osillator Control. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.9 | ColumnactiveInputOrbitalPos | read-write | current | Orbital location Azimuth.The range is from 0 to 3600 in steps of 1. The scaling factor is 1/10th of a degree. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.10 | ColumnactiveInputEastWestFlag | read-write | current | RF Mapping Location East/West Flag. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.11 | ColumnactiveInputPolarization | read-write | current | RF Mapping Polarization. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.12 | ColumnactiveInputSatName | read-only | current | Satellite Name Matching the Orbital Position + E/W Flag. Enter Satellite/Transponder Name to fill in Azimuth and E/W Flag automatically. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.13 | ColumnactiveInputLastLNBConfig | read-write | current | LNB configuration last applied. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.14 | ColumnactiveInputDiSeqCEnable | read-write | current | DiSeqC On/Off. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.15 | ColumnactiveInputDiSeqCSwitch | read-write | current | DiSeqC switch selection. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.3 | TablelnbPowerTable | not-accessible | current | LNB power Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.3.1 | RowlnbPowerEntry | not-accessible | current | Entry for LNB power Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.1 | ColumnlnbPowerIndex | not-accessible | current | Low Noise Block Power Index. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.2 | ColumnlnbPowerInput | read-write | current | Low Noise Block Power Input. |
| 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.3 | ColumnlnbPowerControl | read-write | current | Active LNB Power setting.13/18V is to control dual polarity LNB. The convention is: Horizontal-18V; Vertical-13V. Valid settings are, Off 13V ( 13V always, ign… |
| 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.4 | ColumnlnbPowerStatus | read-only | current | Low Noise Block Power Supply Status. |
| 1.3.6.1.4.1.1429.2.2.5.5.3 | NodetuningStatusTable | |||
| 1.3.6.1.4.1.1429.2.2.5.5.3.1 | TablesatSignalTable | not-accessible | current | Satellite Signal Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1 | RowsatSignalEntry | not-accessible | current | Entry for Satellite Signal Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.1 | ColumnsatSignalIndex | not-accessible | current | Satellite Signal Table Index. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.2 | ColumnsatSignalPvBer | read-only | current | Status: DVB-S Post-Viterbi Bit Error Rate. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.3 | ColumnsatSignalQPSKBer | read-only | current | Status: Quadrature phase-shift keying ( QPSK ) Bit error rate. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.4 | ColumnsatSignalLdpCber | read-only | current | Status: DVB-S2 Low Density Parity Check Bit Error Rate. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.5 | ColumnsatSignalCndisp | read-only | current | Status: Carrier to Noise Ratio. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.6 | ColumnsatSignalCnMargin | read-only | current | Status: Carrier to Noise Ratio Link Margin. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.7 | ColumnsatSignalLevel | read-only | current | Status: Signal Level. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.8 | ColumnsatSignalSatDishCnMargin | read-only | current | Status: SatDish CN Margin in dB Displays the margin in dB to a threshold level at which failure occurs. The range is 0dB to 10dB. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.9 | ColumnsatSignalSatDishSigLevel | read-only | current | Status: SatDish Signal level( in dBm ) plus some kind of graphical signal level meter on the LCD (the range is -75 dBm to +-20 dBm). |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.10 | ColumnsatSignalPerDisp | read-only | current | Status: DVB-S2 Packet Error Rate. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.11 | ColumnsatSignalAfc | read-only | current | Status: Tuner Frequency Offset. The range is from -51.0 to 51.0 in steps of 0.1 MHz. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.12 | ColumnsatSignalUncorErrCnt | read-only | current | Status: Uncorrected Error Counter. The range is from 0 to 4294967295. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.13 | ColumnsatSignalCorErrCnt | read-only | current | Status: DVB-S Reed-Solomon Corrected Error Counter. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.14 | ColumnsatSignalRfLock | read-only | current | Status: RF Lock Status. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.15 | ColumnsatSignalDnLkFreq | read-only | current | Status: Downlink Frequency in the range of 0.000000 to 15.000000 GHz in steps of 0.000001 GHz. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.16 | ColumnsatSignalLbandFreq | read-only | current | Status: L-Band Frequency in the range of 950.000 to 2150.000 MHz in steps of 0.001 MHz. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.17 | ColumnsatSignalSymbolRate | read-only | current | Status: Symbol Rate in the Range of 1.0000 to 45.0000 MegaSym/second in steps of 0.0001 MegaSym/second. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.18 | ColumnsatSignalFecRate | read-only | current | Status: Forward Error Correction Rate. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.19 | ColumnsatSignalPolarization | read-only | current | Status: Signal Polarization. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.20 | ColumnsatSignalModulation | read-only | current | Status: Signal Modulation Type. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.21 | ColumnsatSignalIQ | read-only | current | Status: Spectrum Inversion. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.22 | ColumnsatSignalLnbPsStatus | read-only | current | Status: Low Noise Block Power Supply Status. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.23 | ColumnsatSignalPilots | read-only | current | Status: Presence of Pilot Symbols. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.24 | ColumnsatSignalLoSelect | read-only | current | Status: LO Select. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.25 | ColumnsatSignalPolar | read-only | current | Status: Polarization. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.26 | ColumnsatSignalClearSigErrCnt | read-write | current | Set this variable to yes( 2 ) to clear signal error counter. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.27 | ColumnsatSignalValidateOrbPosDate | read-only | current | Status: Last Orbital Position Validate Date. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.28 | ColumnsatSignalValidateOrbPosStat | read-only | current | Status: Orbital Position Validation Status. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.29 | ColumnsatSignalChScanStatus | read-only | current | Channel Scanning Status :Off/Scanning/Done. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.30 | ColumnsatSignalSigLevelRaw | read-only | current | Signal Level - RAW Register Value. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.31 | ColumnsatSignalP1DStatus | read-only | current | P1 DSTATUS. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.32 | ColumnsatSignalDvbS2FrameLen | read-only | current | DVB-S2 Frame Length. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.33 | ColumnsatSignalCnMarginRaw | read-only | current | C/N Margin - RAW Register Value. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.34 | ColumnsatSignalDvbSQpskErrCount | read-only | current | DVB-S QPSK Error Count. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.35 | ColumnsatSignalDvbS2LdpcErrCount | read-only | current | DVB-S2 LPDC Error Count. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.36 | ColumnsatSignalPvErrCount | read-only | current | DVB-S PV Error Count. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.37 | ColumnsatSignalFecSyncStatus | read-only | current | FEC SYNC Status for DVB-S PV Decoder. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.38 | ColumnsatSignalPktErrCount | read-only | current | DVB-S/DVB-S2 Packet Error Count. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2 | TableinputStatusTable | not-accessible | current | Input Status Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1 | RowinputStatusEntry | not-accessible | current | Entry for Input Status Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.1 | ColumninputStatusIndex | not-accessible | current | Status: Index for inputStatus Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.2 | ColumninputStatusCurInput | read-only | current | Status: Current Input for D9865 only. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.3 | ColumninputStatusSatLock | read-only | current | Status: Satellite Lock: No Lock/Lock+Sig/Lock-Sig. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.4 | ColumninputStatusMpgIpLock | read-only | current | Signal Validity.MPEG over IP Lock. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.5 | ColumninputStatusInputRate | read-only | current | Status: Input Rate in Mega bauds per second ( Mbps ). The range is from 0.000000 to 4294.967295 Mbps in steps of 0.000001 Mbps. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.6 | ColumninputStatusNetworkName | read-only | current | Status: Network Name. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.7 | ColumninputStatusNetworkId | read-only | current | Status: Network ID. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.8 | ColumninputStatusTransportId | read-only | current | Status: Transport ID. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.9 | ColumninputStatusScramblingMode | read-only | current | Status: Scrambling mode. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.10 | ColumninputStatusTransportError | read-only | current | Status: Transport Error. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.11 | ColumninputStatusAsiLock | read-only | current | Status: ASI Lock. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.12 | ColumninputStatusAsiLinkError | read-only | current | Status: ASI Link Error. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.13 | ColumninputStatusAsiPacketSize | read-only | current | Status: ASI Packet Size. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.14 | ColumninputStatusLastTuneReason | read-only | current | Status: Reason for the last tune. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.15 | ColumninputStatusCurD985xInput | read-only | current | Status: Current Input for all IRD models. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.16 | ColumninputStatusIpiLinkStatus | read-only | current | Status: IPI Ethernet Link Status. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.17 | ColumninputStatusIpiSignal | read-only | current | Status: IPI Signal Encapsulation Lock Status. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.18 | ColumninputStatusIpiFecLock | read-only | current | Status: FEC Lock Status. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.19 | ColumninputStatusIpiPcrLock | read-only | current | Status: Indicates if PCR is received without errors or not. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.20 | ColumninputStatusIpiDelLatency | read-only | current | Status: Dejitter Buffer Latency. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.21 | ColumninputStatusIpiData1SrcIP | read-only | current | Status: DATA1 Source IP Selected. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.22 | ColumninputStatusIpiData2SrcIP | read-only | current | Status: DATA2 Source IP Selected. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.23 | ColumninputStatusIpiData1TsType | read-only | current | Status: DATA1 Source Transport Type. |
| 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.24 | ColumninputStatusIpiData2TsType | read-only | current | Status: DATA2 Source Transport Type. |
| 1.3.6.1.4.1.1429.2.2.5.5.4 | NodesiRcvTable | |||
| 1.3.6.1.4.1.1429.2.2.5.5.4.1 | TablesiRcvOptionTable | not-accessible | current | Rcv Option Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.1.1 | RowsiRcvOptionEntry | not-accessible | current | Entry for Rcv Option Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.1 | ColumnsiRcvOptionInstance | not-accessible | current | Instance for siRcvOptionTable. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.2 | ColumnsiRcvOptionAcqMode | read-write | current | Custom Tuning Mode: Acquisition Mode. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.3 | ColumnsiRcvOptionReacq | read-write | current | Set this variable to yes( 2 ) to reacquire signal. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.4 | ColumnsiRcvOptionNetID | read-write | current | Network ID. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.5 | ColumnsiRcvOptionInputSel | read-write | current | UserCfg locks to RF input set by the user and SW Map uses Orbital Position settings to select RF input. It is recommended to set Validate Orbital Position to '… |
| 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.6 | ColumnsiRcvOptionFreqSel | read-write | current | Custom Tuning Mode: Frequency Tuning Mode: NIT/Preset. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.7 | ColumnsiRcvOptionServListMode | read-write | current | Custom Tuning Mode: Service List Mode: Rigorous/Degraded. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.8 | ColumnsiRcvOptionUseBAT | read-only | current | Custom Tuning Mode:Bouquet Association Table in Service List. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.9 | ColumnsiRcvOptionUseNIT | read-write | current | Custom Tuning Mode:Network Information Table in Service List. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.10 | ColumnsiRcvOptionUseSDT | read-write | current | Custom Tuning Mode:Service Description Table in Service List. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.11 | ColumnsiRcvOptionUsePAT | read-write | current | Custom Tuning Mode:Program Association Table in Service List. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.2 | TablesiRcvOptionStatusTable | not-accessible | current | Rcv Option Status Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.2.1 | RowsiRcvOptionStatusEntry | not-accessible | current | Entry for Rcv Option Status Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.1 | ColumnsiRcvOptionStatusInstance | not-accessible | current | Instance of siRcv Option Status Table. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.2 | ColumnsiRcvOptionLastChanReas | read-only | current | Source of the last tuning. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.3 | ColumnsiRcvOptionLastActivated | read-only | current | Last Preset Activated number.The range is from 0 to 64. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.4 | ColumnsiRcvOptionStatusFreqSel | read-only | current | Status of Frequency tuning mode. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.5 | ColumnsiRcvOptionStatusServListMode | read-only | current | Status of Service list mode. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.6 | ColumnsiRcvOptionStatusUseBAT | read-only | current | Status of Bouquet Association Table in Service List. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.7 | ColumnsiRcvOptionStatusUseNIT | read-only | current | Status of Network Information Table in Service List. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.8 | ColumnsiRcvOptionStatusUseSDT | read-only | current | Status of Service Description Table in Service List. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.9 | ColumnsiRcvOptionStatusUsePAT | read-only | current | Status of Program Association Table in Service List. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.3 | TablesiInfoRxTable | not-accessible | current | Service information Receive table. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.3.1 | RowsiInfoRxEntry | not-accessible | current | Entry for Service Information Received. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.1 | ColumnsiInfoRxInstance | not-accessible | current | Instance of SI Info Receive table. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.2 | ColumnsiInfoRxIdx | not-accessible | current | Service Information Receive Table Index. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.3 | ColumnsiInfoRxType | read-only | current | Service Information Receive Table Type. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.4 | ColumnsiInfoRxIDExt | read-only | current | Service Information Receive Table ID Extension. The range is from 0 to 4294967295. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.5 | ColumnsiInfoRxUid | read-only | current | Service Information Receive Unique ID. The range is from 1 to 32. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.6 | ColumnsiInfoRxStatus | read-only | current | Service Information Receive Status. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.7 | ColumnsiInfoRxVer | read-only | current | Service Information Version. The range is from 0 to 4294967295. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.8 | ColumnsiInfoRxPID | read-only | current | Service Information Program ID. The range is from 0 to 8192. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.9 | ColumnsiInfoRxSections | read-only | current | Service Information Number of Sections. The range is from 0 to 4294967295. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.4 | TablesiInfoTsTable | not-accessible | current | Transport Stream table. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.4.1 | RowsiInfoTsEntry | not-accessible | current | Entry for Transport stream table. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.1 | ColumnsiInfoTsInstance | not-accessible | current | Transport Stream Table Instance. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.2 | ColumnsiInfoTsIdx | not-accessible | current | Service Information Transport Stream Index. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.3 | ColumnsiInfoTsId | read-only | current | Frequency Plan: Service Information Transport Stream ID. The range is from 0 to 4294967295. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.4 | ColumnsiInfoTsFreq | read-only | current | Frequency Plan: Service Information Frequency The range is from 0.000000 to 15.000000 GHz in steps of 0.000001 GHz. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.5 | ColumnsiInfoTsSymRate | read-only | current | Frequency Plan: Service Information Symbol Rate. The range is from 1.0000 to 45.0000 Megasym/second in steps of 0.0001 Megasym. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.6 | ColumnsiInfoTsOrbPosn | read-only | current | Frequency Plan: Service Information Orbital Position. The range is from 0.0 to 360.0 . |
| 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.7 | ColumnsiInfoTsPolar | read-only | current | Frequency Plan: Service Information Polarization. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.8 | ColumnsiInfoTsFEC | read-only | current | Frequency Plan: Service Information Forward Error Correction Rate. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.9 | ColumnsiInfoTsModulation | read-only | current | Frequency Plan: Service Information Modulation. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.10 | ColumnsiInfoTsOrgNetID | read-only | current | Frequency Plan: Service Information Original Network ID. The range is from 0 to 4294967295. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.11 | ColumnsiInfoTsEastWestFlag | read-only | current | Frequency Plan: Service Information East West flag. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.5 | TablesiInfoVCInfoTable | not-accessible | current | VC table. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.5.1 | RowsiInfoVCInfoEntry | not-accessible | current | Entry for VC information. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.1 | ColumnsiInfoVCInfoInstance | not-accessible | current | Virtual Channel Info table Instance. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.2 | ColumnsiInfoVCInfoIdx | not-accessible | current | Virtual Channel Info table Index. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.3 | ColumnsiInfoVCInfoId | read-only | current | Service Information VC Service ID. The range is from 0 to 4294967295. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.4 | ColumnsiInfoVCInfoTxID | read-only | current | Service Information VC Transport Stream ID. The range is from 0 to 4294967295. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.5 | ColumnsiInfoVCInfoProgName | read-only | current | Service Information VC Programme Name. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.6 | ColumnsiInfoVCInfoPMTPID | read-only | current | Service Information VC Program Map Table Program ID. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.7 | ColumnsiInfoVCInfoCHType | read-only | current | Service Type:TV service/ Radio service. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.8 | ColumnsiInfoVCInfoECMPID | read-only | current | Service Information VC Entitlement Control Message Program ID. |
| 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.9 | ColumnsiInfoVCInfoAuthorized | read-only | current | Service List: Channel Authorized: Yes/No. |