CISCO-DS1-MIB
38 objects
The MIB module to describe e1 interfaces objects. This is an extension to the standard DS1 MIB(RFC 2558).
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifDescr ifIndex InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.1055 | IdentityciscoDs1MIB | The MIB module to describe e1 interfaces objects. This is an extension to the standard DS1 MIB(RFC 2558). | ||
| 1.3.6.1.4.1.9.9.1055.0 | NodeciscoDs1MIBNotifs | |||
| 1.3.6.1.4.1.9.9.1055.1 | NodeciscoDs1MIBObjects | |||
| 1.3.6.1.4.1.9.9.1055.1.1 | NodeciscoDS1PMData | |||
| 1.3.6.1.4.1.9.9.1055.1.1.1 | TablecoiDS1PMCurrentTable | not-accessible | current | Table containing current pm data for ds1 interface, applicable intervals are 15-min and 24-hour |
| 1.3.6.1.4.1.9.9.1055.1.1.1.1 | RowcoiDS1PMCurrentEntry | not-accessible | current | An entry containing current ds1 pm data |
| 1.3.6.1.4.1.9.9.1055.1.1.1.1.1 | ColumncoiDS1CurrentIntervalType | not-accessible | current | This object gives the interval for which current pm data is collected |
| 1.3.6.1.4.1.9.9.1055.1.1.1.1.2 | ColumncoiDS1CurrentLCVs | read-only | current | This count will be incremented whenever Line code violation(LCV) event is detected due to either a Bipolar Violation (BPV) or Excessive Zeros (EXZ) error event |
| 1.3.6.1.4.1.9.9.1055.1.1.1.1.3 | ColumncoiDS1CurrentPCVs | read-only | current | Counter for path code violations |
| 1.3.6.1.4.1.9.9.1055.1.1.1.1.4 | ColumncoiDS1CurrentSELSs | read-only | current | Counter for frame loss second, This counter is Incremented when an out-of-frame error is detected and will reset when it is cleared. |
| 1.3.6.1.4.1.9.9.1055.1.1.1.1.5 | ColumncoiDS1CurrentLESs | read-only | current | Counter for Line Error seconds, Incremented when Line Code Violation errors are detected. |
| 1.3.6.1.4.1.9.9.1055.1.1.1.1.6 | ColumncoiDS1CurrentAISs | read-only | current | Counter for AIS,Incremented when alarm indication signal is detected. |
| 1.3.6.1.4.1.9.9.1055.1.1.1.1.7 | ColumncoiDS1CurrentFCPs | read-only | current | Failure count at path(FCP), This counter is incremented at event of any AIS, LOF for first time assertion and re-assertion. |
| 1.3.6.1.4.1.9.9.1055.1.1.1.1.8 | ColumncoiDS1CurrentESs | read-only | current | Error Seconds(ES), This counter will be incremented in one of the cases mentioned below -One or more Path Code Violations. -One or more Controlled Slip events |
| 1.3.6.1.4.1.9.9.1055.1.1.1.1.9 | ColumncoiDS1CurrentSESs | read-only | current | Severly Error Seconds(ES), This count will be incremented in below conditions -320 or more Path Code Violation errors. -One or more Out of Frame defects. -An A… |
| 1.3.6.1.4.1.9.9.1055.1.1.1.1.10 | ColumncoiDS1CurrentUASs | read-only | current | Unavailable Error Seconds(UAS) |
| 1.3.6.1.4.1.9.9.1055.1.1.1.1.11 | ColumncoiDS1CurrentESFEs | read-only | current | Error second at FAR end |
| 1.3.6.1.4.1.9.9.1055.1.1.1.1.12 | ColumncoiDS1CurrentSESFEs | read-only | current | Severly Error second at FAR end |
| 1.3.6.1.4.1.9.9.1055.1.1.1.1.13 | ColumncoiDS1CurrentUASFEs | read-only | current | Unavailable Error second at FAR end |
| 1.3.6.1.4.1.9.9.1055.1.1.1.1.14 | ColumncoiDS1currentPMValidData | read-only | current | This variable indicates if the ds1 pm data for the interval identified by coiOtnsecPMCurrentIntervalType is valid. |
| 1.3.6.1.4.1.9.9.1055.1.1.2 | TablecoiDS1PMHisTable | not-accessible | current | Table containing current pm data for sonet/sdh section,line and farend line, applicable intervals are 15-min and 24-hour |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1 | RowcoiDS1PMHisEntry | not-accessible | current | An entry containing current ds1 pm data |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1.1 | ColumncoiDS1PMHisIntervalType | not-accessible | current | This object gives the interval for which ds1 current pm data is collected |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1.2 | ColumncoiDS1PMHisBucketNumber | not-accessible | current | This object gives the bucket number for DS1 pm data in given interval. |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1.3 | ColumncoiDS1HisLCVs | read-only | current | This count will be incremented whenever Line code violation(LCV) event is detected due to either a Bipolar Violation (BPV) or Excessive Zeros (EXZ) error event |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1.4 | ColumncoiDS1HisPCVs | read-only | current | Counter for path code violations |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1.5 | ColumncoiDS1HisSELSs | read-only | current | Counter for frame loss second, This counter is Incremented when an out-of-frame error is detected and will reset when it is cleared. |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1.6 | ColumncoiDS1HisLESs | read-only | current | Counter for Line Error seconds, Incremented when Line Code Violation errors are detected. |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1.7 | ColumncoiDS1HisAISs | read-only | current | Counter for AIS,Incremented when alarm indication signal is detected. |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1.8 | ColumncoiDS1HisFCPs | read-only | current | Failure count at path(FCP), This counter is incremented at event of any AIS, LOF for first time assertion and re-assertion. |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1.9 | ColumncoiDS1HisESs | read-only | current | Error Seconds(ES), This counter will be incremented in one of the cases mentioned below -One or more Path Code Violations. -One or more Controlled Slip events |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1.10 | ColumncoiDS1HisSESs | read-only | current | Severly Error Seconds(ES), This count will be incremented in below conditions -320 or more Path Code Violation errors. -One or more Out of Frame defects. -An A… |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1.11 | ColumncoiDS1HisUASs | read-only | current | Unavailable Error Seconds(UAS) |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1.12 | ColumncoiDS1HisESFEs | read-only | current | Error second at FAR end |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1.13 | ColumncoiDS1HisSESFEs | read-only | current | Severly Error second at FAR end |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1.14 | ColumncoiDS1HisUASFEs | read-only | current | Unavailable Error second at FAR end |
| 1.3.6.1.4.1.9.9.1055.1.1.2.1.15 | ColumncoiDS1HisPMValidData | read-only | current | This variable indicates if the ds1 pm data for the interval identified by coiDS1PMHisIntervalType is valid. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CoiIntervalType | INTEGER { fifteenMin(1), oneDay(2) } | current | This value indicates the time period over which performance monitoring data has been collected. Valid values are - fifteenMin(1) - values for the 15 min interval. oneDay(2) - values for the 1 Day interval. |