CISCO-DS3-MIB
141 objects
The MIB module to describe DS3 line objects. This is an extension to the standard DS3 MIB(RFC 2496).
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.132 | IdentityciscoDs3MIB | The MIB module to describe DS3 line objects. This is an extension to the standard DS3 MIB(RFC 2496). | ||
| 1.3.6.1.4.1.9.9.132.1 | NodeciscoDs3MIBObjects | |||
| 1.3.6.1.4.1.9.9.132.1.1 | Nodecds3Config | |||
| 1.3.6.1.4.1.9.9.132.1.1.1 | Tablecds3ConfigTable | not-accessible | current | The DS3 Configuration table. The table has objects for configuring a T3/E3 line. |
| 1.3.6.1.4.1.9.9.132.1.1.1.1 | Rowcds3ConfigEntry | not-accessible | current | An entry in the table. There is an entry for each available T3/E3 line, with an ifType value of 'ds3'(30). By default, lines are disabled. 'ifAdmin' from ifTab… |
| 1.3.6.1.4.1.9.9.132.1.1.1.1.1 | Columncds3LineType | read-write | current | This variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage a… |
| 1.3.6.1.4.1.9.9.132.1.1.1.1.2 | Columncds3LineAIScBitsCheck | read-write | current | When check(1) is set, then Alarm Indication Signal (AIS) is declared when '1010...'b is found and C-Bits are all zero. When ignore(2) is set, an AIS condition … |
| 1.3.6.1.4.1.9.9.132.1.1.1.1.3 | Columncds3LineRcvFEACValidation | read-write | current | This entry specifies the FEAC (Far End Alarm and Control) code validation criteria. If 'fEACCodes4Of5' is specified, then a valid FEAC code is declared if 4 of… |
| 1.3.6.1.4.1.9.9.132.1.1.1.1.4 | Columncds3LineOOFCriteria | read-write | current | This entry specifies the out of frame(OOF) decision criteria. If 'bits3Of8' is specified then an OOF condition is declared if at least 3 of 8 framing bits are … |
| 1.3.6.1.4.1.9.9.132.1.1.1.1.5 | Columncds3TraceToTransmit | read-write | current | Transmitted G.832 Trail Trace string. |
| 1.3.6.1.4.1.9.9.132.1.1.1.1.6 | Columncds3TraceToExpect | read-write | current | G.832 Trail Trace string that is expected to be received from the other end. |
| 1.3.6.1.4.1.9.9.132.1.1.1.1.7 | Columncds3TraceAlarm | read-only | current | The value of this object is set to traceFailure(2) when DS3 line receives a trace does not match the 'cds3TraceToExpect'. |
| 1.3.6.1.4.1.9.9.132.1.1.1.1.8 | Columncds3InternalEqualizer | read-write | current | This variable indicates whether the internal equalizer is being used or bypassed. Set this value depending on the line equipment to which the receiver is attac… |
| 1.3.6.1.4.1.9.9.132.1.1.1.1.9 | Columncds3NearEndLineLoopbackStatus | read-only | current | Indicates the loopback status of the near end DS1 on this DS3 when loopback request is indicated. Following table lists the mapping of Bit position to DS1 or D… |
| 1.3.6.1.4.1.9.9.132.1.1.1.1.10 | Columncds3FarEndLineLoopbackStatus | read-only | current | Indicates the loopback status of the far end DS3,DS1 when remote DS1 loopback request is initiated. The remote DS1 loopback is initiated by setting dsx3SendCod… |
| 1.3.6.1.4.1.9.9.132.1.2 | Nodecds3Alarm | |||
| 1.3.6.1.4.1.9.9.132.1.2.1 | Nodecds3AlarmConfig | |||
| 1.3.6.1.4.1.9.9.132.1.2.1.1 | Tablecds3AlarmConfigTable | not-accessible | current | The DS3 interface alarm configuration table. This table contains the parameters associated with detecting and declaring alarms for the interface. The parameter… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1 | Rowcds3AlarmConfigEntry | not-accessible | current | An entry in the T3/E3 Alarm Configuration Table. The entries are automatically created for an ifType value of 'ds3'(30), with default values for objects. Thres… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.1 | Columncds3NEAlarmUpCount | read-write | current | This parameter specifies the increment to the Near End alarm integration counters. The local alarms are LOS and LOF. The Default value is 6 and the integration… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.2 | Columncds3NEAlarmDownCount | read-write | current | This parameter specifies the decrement to the Near End alarm integration counters. The alarms are LOS and LOF. The Default value is 1 and the integration count… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.3 | Columncds3NEAlarmThreshold | read-write | current | The value set in this object determines the value that the alarm integration counter must reach for an near end alarm to be declared. If the up count is 6, and… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.4 | Columncds3FEAlarmUpCount | read-write | current | This parameter specifies the increment to the Far End alarm integration counters. The alarms are Remote Alarm Indication (RAI) and Alarm Indication Signal(AIS)… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.5 | Columncds3FEAlarmDownCount | read-write | current | This parameter specifies the decrement to the Far End alarm integration counters. The alarms are Alarm Indication Signal (AIS) and Remote Alarm Indication (RAI… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.6 | Columncds3FEAlarmThreshold | read-write | current | The value set in this object determines the value that the alarm integration counter must reach for an far end Alarm to be declared. If the up count is 6, the … |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.7 | Columncds3StatisticalAlarmSeverity | read-write | current | This variable is used to setup the severity of any of the Statistical alarms. So when a Statistical Counter exceeds its specified threshold the system will sen… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.8 | Columncds3LCV15MinThreshold | read-write | current | The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared. |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.9 | Columncds3LCV24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is c… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.10 | Columncds3LES15MinThreshold | read-write | current | The value set in this object determines the value which when exceeded in a 15 minute window causes which when exceeded in a 15 minute window causes a statistic… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.11 | Columncds3LES24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is c… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.12 | Columncds3PCV15MinThreshold | read-write | current | The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared. Not for E3. |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.13 | Columncds3PCV24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is c… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.14 | Columncds3PES15MinThreshold | read-write | current | The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared. Not for E3. |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.15 | Columncds3PES24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is c… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.16 | Columncds3PSES15MinThreshold | read-write | current | The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared. Not for E3. |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.17 | Columncds3PSES24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is c… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.18 | Columncds3SEFS15MinThreshold | read-write | current | The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared. |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.19 | Columncds3SEFS24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is c… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.20 | Columncds3UAS15MinThreshold | read-write | current | The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared. |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.21 | Columncds3UAS24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is c… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.22 | Columncds3CCV15MinThreshold | read-write | current | The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared. Not for E3. |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.23 | Columncds3CCV24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is c… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.24 | Columncds3CES15MinThreshold | read-write | current | The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared. Not for E3. |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.25 | Columncds3CES24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. Not for E3. |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.26 | Columncds3CSES15MinThreshold | read-write | current | The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared. Not for E3. |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.27 | Columncds3CSES24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. Not for E3. |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.28 | Columncds3LSES15MinThreshold | read-write | current | Used to set the 15 minute threshold for LSES(Line Severely Errored Seconds). The value set in this object determines the value which when exceeded in a 15 minu… |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.29 | Columncds3LSES24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. |
| 1.3.6.1.4.1.9.9.132.1.2.1.1.1.30 | Columncds3LineStatisticalAlarmState | read-only | current | This is a bitmap of the DS3 Line Statistical alarms. It is represented as a sum where value 2^(N-1) is added to the sum if threshold corresponding to bit N is … |
| 1.3.6.1.4.1.9.9.132.1.2.1.2 | Tablecds3AlarmConfigPlcpTable | not-accessible | current | The ATM interface PLCP alarm configuration table. PLCP is a sublayer over the DS3 interface, that carries ATM cells. |
| 1.3.6.1.4.1.9.9.132.1.2.1.2.1 | Rowcds3AlarmConfigPlcpEntry | not-accessible | current | An entry in the DS3 PLCP Alarm Configuration table. The entries contain parameters to configure DS3 PLCP error statistics thresholds, so that an alarm is raise… |
| 1.3.6.1.4.1.9.9.132.1.2.1.2.1.1 | Columncds3PlcpStatisticalAlarmSeverity | read-write | current | This variable sets up the severity of PLCP Statistical alarm. So when PLCP Statistical alarm is detected the module will send the alarm with appropriate severi… |
| 1.3.6.1.4.1.9.9.132.1.2.1.2.1.2 | Columncds3PlcpBip8CV15MinThreshold | read-write | current | The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared. |
| 1.3.6.1.4.1.9.9.132.1.2.1.2.1.3 | Columncds3PlcpBip8CV24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is c… |
| 1.3.6.1.4.1.9.9.132.1.2.1.2.1.4 | Columncds3PlcpBip8ES15MinThreshold | read-write | current | The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared. |
| 1.3.6.1.4.1.9.9.132.1.2.1.2.1.5 | Columncds3PlcpBip8ES24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is c… |
| 1.3.6.1.4.1.9.9.132.1.2.1.2.1.6 | Columncds3PlcpBip8SES15MinThreshold | read-write | current | The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared. |
| 1.3.6.1.4.1.9.9.132.1.2.1.2.1.7 | Columncds3PlcpBip8SES24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is c… |
| 1.3.6.1.4.1.9.9.132.1.2.1.2.1.8 | Columncds3PlcpSEFS15MinThreshold | read-write | current | The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared. |
| 1.3.6.1.4.1.9.9.132.1.2.1.2.1.9 | Columncds3PlcpSEFS24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is c… |
| 1.3.6.1.4.1.9.9.132.1.2.1.2.1.10 | Columncds3PlcpUAS15MinThreshold | read-write | current | The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared. |
| 1.3.6.1.4.1.9.9.132.1.2.1.2.1.11 | Columncds3PlcpUAS24HrThreshold | read-write | current | The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is c… |
| 1.3.6.1.4.1.9.9.132.1.2.2 | Tablecds3AlarmPlcpTable | not-accessible | current | The Plcp interface alarm table. This table maintains the CV,ES,SES, SEFS and UAS for DS3 line with Plcp framing selected. Please refer to RFC2496 for descripti… |
| 1.3.6.1.4.1.9.9.132.1.2.2.1 | Rowcds3AlarmPlcpEntry | not-accessible | current | An entry in the DS3 Plcp Alarm table. Bucket statistics(15 minute and 24 hour interval statistics) are gathered for each existing DS3 line with PLCP frame form… |
| 1.3.6.1.4.1.9.9.132.1.2.2.1.1 | Columncds3PlcpLineAlarmState | read-only | current | This variable is a bitmap of the DS3 Line ALarms. It is represented as sum where value 2^(N-1) is added to the sum if alarm corresponding to bit N is exceeded.… |
| 1.3.6.1.4.1.9.9.132.1.2.2.1.2 | Columncds3PlcpLineStatisticalAlarmState | read-only | current | This variable is a bitmap of the DS3 Plcp Line Statictical Alarms. It is represented as a sum, where value 2^(N-1) is added to the sum if threshold correspondi… |
| 1.3.6.1.4.1.9.9.132.1.2.2.1.3 | Columncds3PlcpBip8CVCurrent | read-only | current | The number of BIP-8 code violations (CV) encountered by the line in the current 15 minute period. |
| 1.3.6.1.4.1.9.9.132.1.2.2.1.4 | Columncds3PlcpBip8CV24HrBucket | read-only | current | The number of BIP-8 CVs encountered by the line in the last 24 hours. |
| 1.3.6.1.4.1.9.9.132.1.2.2.1.5 | Columncds3PlcpBip8ESCurrent | read-only | current | The number of BIP-8 Errored Seconds(ES) encountered by the line in the current 15 minute period. |
| 1.3.6.1.4.1.9.9.132.1.2.2.1.6 | Columncds3PlcpBip8ES24HrBucket | read-only | current | The number of BIP-8 ES encountered by the line in the last 24 hour. |
| 1.3.6.1.4.1.9.9.132.1.2.2.1.7 | Columncds3PlcpBip8SESCurrent | read-only | current | The number of BIP-8 Severely Errored Seconds(ES) encountered by the line in the current 15 minute period. |
| 1.3.6.1.4.1.9.9.132.1.2.2.1.8 | Columncds3PlcpBip8SES24HrBucket | read-only | current | The number of BIP-8 SES encountered by the line in the last 24 hour. |
| 1.3.6.1.4.1.9.9.132.1.2.2.1.9 | Columncds3PlcpSEFSCurrent | read-only | current | The number of BIP-8 Severely Errored Framing Seconds(SEFS) encountered by the line in the current 15-minute period. |
| 1.3.6.1.4.1.9.9.132.1.2.2.1.10 | Columncds3PlcpSEFS24HrBucket | read-only | current | The number of BIP-8 SEFS encountered by the line in the last 24 hour. |
| 1.3.6.1.4.1.9.9.132.1.2.2.1.11 | Columncds3PlcpUASCurrent | read-only | current | The number of Unavailable Seconds(UAS) encountered by the line in the current 15-minute period. |
| 1.3.6.1.4.1.9.9.132.1.2.2.1.12 | Columncds3PlcpUAS24HrBucket | read-only | current | The number of BIP-8 UAS encountered by the line in the last 24 hour. |
| 1.3.6.1.4.1.9.9.132.1.3 | Nodecds3Stats | |||
| 1.3.6.1.4.1.9.9.132.1.3.1 | Tablecds3StatsTable | not-accessible | current | T3/E3 Statistics table. This table maintains the number of times the line encountered Loss of Signal(LOS), out of frame(LOF), Alarm Indication signals(AIS), Re… |
| 1.3.6.1.4.1.9.9.132.1.3.1.1 | Rowcds3StatsEntry | not-accessible | current | An entry in the T3/E3 Statistics table. Statistics are gathered for each existing T3/E3 line. An entry is created automatically for each T3/E3 line that is act… |
| 1.3.6.1.4.1.9.9.132.1.3.1.1.1 | Columncds3RcvLOSCount | read-only | current | The number of times Loss of Signal was detected with or without integrating to LOS alarm. |
| 1.3.6.1.4.1.9.9.132.1.3.1.1.2 | Columncds3RcvOOFCount | read-only | current | The number of times Out of Frame was detected with or without integrating to OOF alarm. |
| 1.3.6.1.4.1.9.9.132.1.3.1.1.3 | Columncds3RAICount | read-only | current | The number of timesRemote Alarm Indication was detected with or without integrating to RAI alarm. |
| 1.3.6.1.4.1.9.9.132.1.3.1.1.4 | Columncds3CCVCount | read-only | current | The counter associated with the number of C-Bit Coding Violations encountered by a T3/E3 interface. |
| 1.3.6.1.4.1.9.9.132.1.3.1.1.5 | Columncds3FECount | read-only | current | The number of Framing Errors encountered by a T3/E3 interface. |
| 1.3.6.1.4.1.9.9.132.1.3.1.1.6 | Columncds3EXZSCount | read-only | current | The number of Excessive Zeros(EXZ) by a T3/E3 interface. An EXZ is the occurrence of any string of zeros having length equal to or greater than 3 for B3ZS, or … |
| 1.3.6.1.4.1.9.9.132.1.3.1.1.7 | Columncds3LCVCount | read-only | current | The count of both BPVs(Bipolar Violations) and EXZs(Excessive Zeros) encountered by a T3/E3 interface.An EXZ increments the LCV by one regardless of the length… |
| 1.3.6.1.4.1.9.9.132.1.3.1.1.8 | Columncds3PCVCount | read-only | current | This is the count of P-bit Coding Violation(PCV) error event encountered by DS3 interface. For all DS3 applications, a coding violation error event is a P-bit … |
| 1.3.6.1.4.1.9.9.132.1.3.1.1.9 | Columncds3CPECount | read-only | current | The number of C-bit parity errors(CPERR) on a DS3 interface. This value is calculated over noninformation bits in the DS3 frame. |
| 1.3.6.1.4.1.9.9.132.1.3.1.1.10 | Columncds3FEBECount | read-only | current | The number of Far End Block Errors(FEBE) encountered by a T3/E3 interface.These include frame alignment errors, multiframe alignment errors, and C-bit parity e… |
| 1.3.6.1.4.1.9.9.132.1.3.1.1.11 | Columncds3RcvAISCount | read-only | current | The number of times Alarm Indication Signals(AIS) were detected. The AIS indicates that an upstream failure has been detected by the far end. |
| 1.3.6.1.4.1.9.9.132.1.3.2 | Tablecds3PlcpStatsTable | not-accessible | current | T3 Plcp Statistics table. This table maintains the errors encountered by the T3 line with Plcp frame format selected, from the time the line is up.Line fails a… |
| 1.3.6.1.4.1.9.9.132.1.3.2.1 | Rowcds3PlcpStatsEntry | not-accessible | current | An entry in the T3 Plcp Stats table. Statistics are gathered for each existing T3 line with PLCP frame format selected. An entry is created automatically and i… |
| 1.3.6.1.4.1.9.9.132.1.3.2.1.1 | Columncds3PlcpRcvBip8Count | read-only | current | The number of of BIP-8 errors encountered by the line. |
| 1.3.6.1.4.1.9.9.132.1.3.2.1.2 | Columncds3PlcpRcvOOFCount | read-only | current | The number of times Out of Frame(OOF) was detected with or without integrating to OOF alarm. |
| 1.3.6.1.4.1.9.9.132.1.3.2.1.3 | Columncds3PlcpRcvRAICount | read-only | current | The number of times Remote Alarm Indication(RAI) was detected with or without integrating to RAI alarm. |
| 1.3.6.1.4.1.9.9.132.1.3.2.1.4 | Columncds3PlcpFECount | read-only | current | The number of Framing Errors detected. |
| 1.3.6.1.4.1.9.9.132.1.3.2.1.5 | Columncds3PlcpFESecCount | read-only | current | The number of Framing Error errored seconds. |
| 1.3.6.1.4.1.9.9.132.1.3.2.1.6 | Columncds3PlcpSEFSecCount | read-only | current | The number of Severely errored Framing error seconds. |
| 1.3.6.1.4.1.9.9.132.1.3.2.1.7 | Columncds3PlcpFEBECount | read-only | current | The count of Far End Block Errors (FEBE) detected. |
| 1.3.6.1.4.1.9.9.132.1.3.2.1.8 | Columncds3PlcpFEBESecCount | read-only | current | The number of FEBE errored seconds. |
| 1.3.6.1.4.1.9.9.132.1.3.2.1.9 | Columncds3PlcpSEFEBESecCount | read-only | current | The number of Severely errored FEBE seconds. |
| 1.3.6.1.4.1.9.9.132.1.3.4 | Tablecds3IntervalTable | not-accessible | current | The DS3 interface interval table. |
| 1.3.6.1.4.1.9.9.132.1.3.4.1 | Rowcds3IntervalEntry | not-accessible | current | An entry in the T3/E3 current interval table. |
| 1.3.6.1.4.1.9.9.132.1.3.4.1.1 | Columncds3IntervalNumber | read-only | current | A number between 0 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minute interval completed 23 hours and 45 minutes prior t… |
| 1.3.6.1.4.1.9.9.132.1.3.4.1.2 | Columncds3IntervalLSESs | read-only | current | The number of LSESs encountered by the line in 15 minute interval. |
| 1.3.6.1.4.1.9.9.132.1.3.5 | Tablecds3Current24HrTable | not-accessible | current | The DS3 interface current 24 hour table. This table contains counters for current 24 hour interval. Threshold on this counters are configured through cds3Alarm… |
| 1.3.6.1.4.1.9.9.132.1.3.5.1 | Rowcds3Current24HrEntry | not-accessible | current | An entry in the T3/E3 current 24 hour counter table. The entries are automatically created for an ifType value of 'ds3'(30), when interface is made active. |
| 1.3.6.1.4.1.9.9.132.1.3.5.1.1 | Columncds3LCVCurrent24Hr | read-only | current | The number of LCVs encountered by the line since the start of current 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.5.1.2 | Columncds3LESCurrent24Hr | read-only | current | The number LESs encountered by the line since the start of current 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.5.1.3 | Columncds3PCVCurrent24Hr | read-only | current | The number PCVs encountered by the line since the start of current 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.5.1.4 | Columncds3PESCurrent24Hr | read-only | current | The number of PESs encountered by the line since the start of current 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.5.1.5 | Columncds3PSESCurrent24Hr | read-only | current | The number of PSESs encountered by the line since the start of current 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.5.1.6 | Columncds3SEFSCurrent24Hr | read-only | current | The number of SEFSs encountered by the line since the start of the current 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.5.1.7 | Columncds3UASCurrent24Hr | read-only | current | The number of UASs encountered by the line since the start of current 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.5.1.8 | Columncds3CCVCurrent24Hr | read-only | current | The number CCVs encounterd by the line since the start of current 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.5.1.9 | Columncds3CESCurrent24Hr | read-only | current | The number of CESs encountered by the line since the start of current 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.5.1.10 | Columncds3CSESCurrent24Hr | read-only | current | The number of CSESs encountered by the line since th start of current 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.5.1.11 | Columncds3LSESCurrent24Hr | read-only | current | The number of LSESs (Line severedly errored seconds) encountered by the line since the start of current 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.6 | Tablecds3Previous24HrTable | not-accessible | current | The DS3 interface previous 24 hour table. This table contains counters for previous 24 hour interval. Implementation of this table is optional. |
| 1.3.6.1.4.1.9.9.132.1.3.6.1 | Rowcds3Previous24HrEntry | not-accessible | current | An entry in the T3/E3 current 24 hour counter table. The entries are automatically created for an ifType value of ds3(30), when interface is made active. |
| 1.3.6.1.4.1.9.9.132.1.3.6.1.1 | Columncds3LCVPrevious24Hr | read-only | current | The number of LCVs encountered by the line in the previous 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.6.1.2 | Columncds3LESPrevious24Hr | read-only | current | The number LESs encountered by the line in the previous 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.6.1.3 | Columncds3PCVPrevious24Hr | read-only | current | The number PCVs encountered by the line in the previous 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.6.1.4 | Columncds3PESPrevious24Hr | read-only | current | The number of PESs encountered by the line in the previous 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.6.1.5 | Columncds3PSESPrevious24Hr | read-only | current | The number of PSESs encountered by the line in the previous 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.6.1.6 | Columncds3SEFSPrevious24Hr | read-only | current | The number of SEFSs encountered by the line in the start of the current 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.6.1.7 | Columncds3UASPrevious24Hr | read-only | current | The number of UASs encountered by the line in the previous 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.6.1.8 | Columncds3CCVPrevious24Hr | read-only | current | The number CCVs encounterd by the line in the previous 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.6.1.9 | Columncds3CESPrevious24Hr | read-only | current | The number of CESs encountered by the line in the previous 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.6.1.10 | Columncds3CSESPrevious24Hr | read-only | current | The number of CSESs encountered by the line in the previous 24 hour period. |
| 1.3.6.1.4.1.9.9.132.1.3.6.1.11 | Columncds3LSESPrevious24Hr | read-only | current | The number of LSESs encountered by the line in the previous 24 hour period. |
| 1.3.6.1.4.1.9.9.132.8 | NodeciscoDs3MIBConformance | |||
| 1.3.6.1.4.1.9.9.132.8.1 | NodeciscoDs3MIBCompliances | |||
| 1.3.6.1.4.1.9.9.132.8.1.1 | ComplianceciscoDs3MIBCompliance | not-accessible | current | The Compliance statement for ciscoDs3 management group. |
| 1.3.6.1.4.1.9.9.132.8.2 | NodeciscoDs3MIBGroups | |||
| 1.3.6.1.4.1.9.9.132.8.2.1 | GroupciscoDs3ConfMIBGroup | current | Collection of DS3/E3 line related configuration parameters. | |
| 1.3.6.1.4.1.9.9.132.8.2.2 | Groupcds3StatsMIBGroup | current | Collection of DS3/E3 line related real time counters. | |
| 1.3.6.1.4.1.9.9.132.8.2.3 | GroupciscoDs3AlarmMIBGroup | current | Collection of DS3/E3 related interval counters and threshold parameters. | |
| 1.3.6.1.4.1.9.9.132.8.2.4 | GroupciscoPlcpCounterMIBGroup | current | Collection of PLCP related real time counters. | |
| 1.3.6.1.4.1.9.9.132.8.2.5 | GroupciscoPlcpAlarmMIBGroup | current | Collection of PLCP related interval counters and threshold parameters. | |
| 1.3.6.1.4.1.9.9.132.8.2.6 | GroupciscoDs3Previous24HrGroup | current | A collection DS3/E3 related previous 24 hour counters. |