CISCO-DSL-PROVISION-MIB
139 objects
Cisco DSL (Digital Subscriber Line) Provision MIB Module. It is used to create subscriber PPP over ATM sessions and related tasks.
Imported Objects
| CISCO-SMI | ciscoExperiment |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.30 | IdentityciscoDslProvisionMIB | Cisco DSL (Digital Subscriber Line) Provision MIB Module. It is used to create subscriber PPP over ATM sessions and related tasks. | ||
| 1.3.6.1.4.1.9.10.30.1 | NodeciscoDslProvMIBObjects | |||
| 1.3.6.1.4.1.9.10.30.1.1 | NodecdslNrpSlot | |||
| 1.3.6.1.4.1.9.10.30.1.1.1 | ScalarcdslMaxNrps | read-only | current | Maximum number of the node routing processors (NRP) allowed in the system. |
| 1.3.6.1.4.1.9.10.30.1.1.2 | ScalarcdslNrpNumber | read-only | current | The number of NRPs that are present in this system. |
| 1.3.6.1.4.1.9.10.30.1.1.3 | TablecdslNrpIpAddressTable | not-accessible | current | This table reflects the IP addresses of each NRP in the system. |
| 1.3.6.1.4.1.9.10.30.1.1.3.1 | RowcdslNrpIpAddressEntry | not-accessible | current | These entries are used to store the IP Addresses of NRP cards that are inserted in the indexed slot. The IP addresses are used to access these cards. |
| 1.3.6.1.4.1.9.10.30.1.1.3.1.1 | ColumncdslNrpSlotIndex | not-accessible | current | The object specifies the identifier of a slot containing a NRP. |
| 1.3.6.1.4.1.9.10.30.1.1.3.1.2 | ColumncdslNrpIpAddress | read-only | current | The object specifies the IP addresses associated with the NRP contained in the slot identified by cdslNrpSlotIndex. |
| 1.3.6.1.4.1.9.10.30.1.2 | NodecdslVirtualTemplate | |||
| 1.3.6.1.4.1.9.10.30.1.2.1 | TablecdslVirtualTemplateNumberTable | not-accessible | current | This table reflects the number of virtual template that are presently set up in each NRP. A virtual template interface is a logical entity a configuration for … |
| 1.3.6.1.4.1.9.10.30.1.2.1.1 | RowcdslVirtualTemplateNumberEntry | not-accessible | current | Entries are read only. |
| 1.3.6.1.4.1.9.10.30.1.2.1.1.1 | ColumncdslMaxVirtualTemplates | read-only | current | The object specifies the maximum number of virtual templates allowed in one single NRP. |
| 1.3.6.1.4.1.9.10.30.1.2.1.1.2 | ColumncdslVirtualTemplates | read-only | current | This object indicates the number of virtual templates presently set up in each NRP identified by cdslNrpSlotIndex. |
| 1.3.6.1.4.1.9.10.30.1.2.2 | TablecdslVirtualTemplateTable | not-accessible | current | This table includes the virtual templates in the NRP identified by cNrpSlotIndex. Though a virtual template is often called a virtual template interface, it is… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1 | RowcdslVirtualTemplateEntry | not-accessible | current | User may create a new entry or delete an existing entry. Entries may be created without explicitly setting cdslVTRowStatus. While the row status is 'active', o… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.1 | ColumncdslVTIndex | not-accessible | current | This object represents an arbitrary index used to identify the virtual template entry. |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.2 | ColumncdslVTIpAddressMethod | read-create | current | This object indicates how an IP address is obtained to be associated with this virtual template. The actual parameters of these methods are indicated by the ob… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.3 | ColumncdslVTIpAddress | read-create | current | This object specifies the IP address associated with this virtual template entry. This object is only valid when cdslVTIpAddressMethod is 'ipAddress'. To set t… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.4 | ColumncdslVTIpAddressMask | read-create | current | This object specifies the IP address mask. This object is only valid when cdslVTIpAddressMethod is 'ipAddress'. To set the value correctly, this object shall b… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.5 | ColumncdslVTIpIfIndex | read-create | current | This object specifies the ifIndex of the interface, whose IP address will be used for the virtual template entry. Any interface with an IP address in the routi… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.6 | ColumncdslVTPeerIpAddressMethod | read-create | current | This object indicates how an IP address is obtained when a peer requesting one. The actual parameters of these methods are indicated by the objects defined aft… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.7 | ColumncdslVTPeerIpAddrPool | read-create | current | This object is used to specify peer default local IP address pool name. This object is only valid when cdslVTPeerIpAddressMethod is 'ipAddressPool'. To set the… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.8 | ColumncdslVTPppAuthChap | read-create | current | This object is used to specify to use Challenge Handshake Authentication Protocol (CHAP) authentication method and the order it is used. The value zero indicat… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.9 | ColumncdslVTPppAuthMSChap | read-create | current | This object is used to specify the use of Microsoft's CHAP (MSCHAP) authentication method and the order it is used. The value zero indicates that MSCHAP is not… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.10 | ColumncdslVTPppAuthPap | read-create | current | This object is used to specify whether to use Password Authentication Protocol (PAP) authentication method and the order it is used. This object is one of mult… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.11 | ColumncdslVTPppChapHost | read-create | current | This object is used to specify the PPP CHAP host name. |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.12 | ColumncdslVTPppChapPassword | read-create | current | This object is used to specify the PPP CHAP password. |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.13 | ColumncdslVTPppChapEncrypType | read-create | current | This object is used to specify whether to encrypt the PPP CHAP password. Only effective when cdslVTPppChapPassword is non-empty. |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.14 | ColumncdslVTPppChapRefuse | read-create | current | The object is used to refuse CHAP authentication from peers requesting it. To disable this function set the value to no. RefuseCallinOnly indicating the system… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.15 | ColumncdslVTPppChapWaitPeer | read-create | current | This object is used to specify that the system will not authenticate to a peer requesting CHAP authentication until after the peer has authenticated to this sy… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.16 | ColumncdslVTPppPapUserName | read-create | current | This object is used to specify the PPP PAP user name that will be sent to a peer device. Please refer to the description of cdslVTPppPassword to see the intera… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.17 | ColumncdslVTPppPapPassword | read-create | current | This object is used to specify the PPP PAP authentication password. The system only utilizes the user name and password when both cdslVTPppUserName and cdslVTP… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.18 | ColumncdslVTPppPapEncrypType | read-create | current | This object is used to specify whether to encrypt the PAP password. Only effective when cdslVTPppPapPassword is non-empty. |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.19 | ColumncdslVTPppUseTacacs | read-create | current | This object is used to specify whether to enable TACACS for PPP authentication. SingleLine means yes and plus to accept username and password in the username f… |
| 1.3.6.1.4.1.9.10.30.1.2.2.1.20 | ColumncdslVTRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.9.10.30.1.3 | NodecdslLocalIpAddrPool | |||
| 1.3.6.1.4.1.9.10.30.1.3.1 | TablecdslLocalIpAddrPoolNumberTable | not-accessible | current | This table indicates the number of IP address pools that are presently set up in each NRP. |
| 1.3.6.1.4.1.9.10.30.1.3.1.1 | RowcdslLocalIpAddrPoolNumberEntry | not-accessible | current | Entries are read only. |
| 1.3.6.1.4.1.9.10.30.1.3.1.1.1 | ColumncdslMaxLocalIpAddrPools | read-only | current | Maximum number of local IP address pools allowed in a NRP. |
| 1.3.6.1.4.1.9.10.30.1.3.1.1.2 | ColumncdslLocalIpAddrPools | read-only | current | The number of local IP address pools presently set up. |
| 1.3.6.1.4.1.9.10.30.1.3.2 | TablecdslLocalIpAddrPoolTable | not-accessible | current | This table defines the IP local address pool. An IP address pool may have a single entry in the table. The ranges of a pool are represented in the cdslLocalIPA… |
| 1.3.6.1.4.1.9.10.30.1.3.2.1 | RowcdslLocalIpAddrPoolEntry | not-accessible | current | This list contains IP pool entry. The entry is read-only. The creation or the deletion of an entry will be a by-product of the entry in the cdslLocalIPAddrRang… |
| 1.3.6.1.4.1.9.10.30.1.3.2.1.1 | ColumncdslLocalIpAddrPoolName | not-accessible | current | A unique and non-empty string for the pool. The name can not be modified once created. |
| 1.3.6.1.4.1.9.10.30.1.3.2.1.2 | ColumncdslLocalIpAddrPoolFreeAddresses | read-only | current | The number of IP addresses still available for use in the pool. Please notice that the number is for the whole pool, not for the individual range. |
| 1.3.6.1.4.1.9.10.30.1.3.2.1.3 | ColumncdslLocalIpAddrPoolInUseAddresses | read-only | current | The number of addresses currently in use in the pool. Please notice that the number is for the whole pool, not for the individual range. |
| 1.3.6.1.4.1.9.10.30.1.3.3 | TablecdslLocalIpAddrRangeTable | not-accessible | current | This table defines the IP local address pool ranges. An IP address pool may have a single entry or multiple entries in the table, since an IP address pool can … |
| 1.3.6.1.4.1.9.10.30.1.3.3.1 | RowcdslLocalIpAddrRangeEntry | not-accessible | current | This list contains IP pool range entry. User may create a new entry or delete an existing entry. When creating an entry, after its activation, an entry in the … |
| 1.3.6.1.4.1.9.10.30.1.3.3.1.1 | ColumncdslLocalIpAddrRangeLowAddr | not-accessible | current | The low range of this IP address pool range. This must be lower than the pool's high range. |
| 1.3.6.1.4.1.9.10.30.1.3.3.1.2 | ColumncdslLocalIpAddrRangeHighAddr | not-accessible | current | The high range of this IP address pool range. This must be higher than the pool's low range. |
| 1.3.6.1.4.1.9.10.30.1.3.3.1.3 | ColumncdslLocalIpAddrRangeRowStatus | read-create | current | This object is used to create a new row or delete an existing row in this table. |
| 1.3.6.1.4.1.9.10.30.1.4 | NodecdslAtmPvc | |||
| 1.3.6.1.4.1.9.10.30.1.4.1 | TablecdslPppOverAtmPvcNumberTable | not-accessible | current | This table reflects the number of PVCs of PPP encapsulation presently set up in each NRP. |
| 1.3.6.1.4.1.9.10.30.1.4.1.1 | RowcdslPppOverAtmPvcNumberEntry | not-accessible | current | Each entry represents the responding NRP. |
| 1.3.6.1.4.1.9.10.30.1.4.1.1.1 | ColumncdslPppOverAtmPvcs | read-only | current | The number of atm pvcs that are presently set up with PPP encapsulation. The number of all atm PVCs and the maximum number of PVCs are provided by AToM Mib. |
| 1.3.6.1.4.1.9.10.30.1.4.2 | TablecdslAtmPvcTable | not-accessible | current | This table includes configuration parameters for ATM PVCs with PPP encapsulation. The vc-mode ATM PVC management approach is used as the PVC creating method, w… |
| 1.3.6.1.4.1.9.10.30.1.4.2.1 | RowcdslAtmPvcEntry | not-accessible | current | The IfIndex by which the table is indexed, is the ATM interface index in which the PVC is created. The only object that is allowed to change the value while th… |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.1 | ColumncdslAtmPvcVpi | not-accessible | current | The virtual path identifier of the PVC. Please note that it is routing processor's VPI number. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.2 | ColumncdslAtmPvcVci | not-accessible | current | The virtual channel identifier of the PVC. Please note that it is routing processor's VCI number. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.3 | ColumncdslAtmPvcName | read-create | current | This object can be used to identify the PVC. Unique name for each PVC is desired if assigned. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.4 | ColumncdslAtmPvcSubIfNumber | read-create | current | This object indicates the ios sub-interface number if this PVC belongs to an atm sub-interface. Once the pvc exists, the value can not be modified. If the PVC … |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.5 | ColumncdslAtmPvcClass | read-create | current | This object indicates the vc-class to inherit when the named vc-class exists. If the object is to set into an empty string, the default value 'default-vc-class… |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.6 | ColumncdslAtmPvcQosType | read-only | current | Quality of Service type of this PVC. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.7 | ColumncdslAtmPvcAbrPCR | read-only | current | Availabe bit rate (Abr) peak cell rate(PCR) of this PVC. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.8 | ColumncdslAtmPvcAbrMCR | read-only | current | Abr Minimum Guaranteed Cell Rate(MCR) of this PVC. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.9 | ColumncdslAtmPvcAbrIORIF | read-only | current | Abr inverse of rate increase factor (1/rif) of this PVC. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.10 | ColumncdslAtmPvcAbrIORDF | read-only | current | Abr inverse of rate decrease factor (1/rdf) of this PVC. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.11 | ColumncdslAtmPvcBroadcast | read-only | current | This object indicates whether to allow broadcast or not. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.12 | ColumncdslAtmPvcEncapsulation | read-only | current | This object indicates encapsulation method of this PVC. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.13 | ColumncdslAtmPvcMuxLinkType | read-create | current | |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.14 | ColumncdslAtmPvcVirtualTemplate | read-create | current | The virtual template number configured for the PVC. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.15 | ColumncdslAtmPvcILMIManage | read-only | current | This object indicates whether to ilmi manage or not. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.16 | ColumncdslAtmPvcInarp | read-only | current | This object indicates the InARP Frequency in minutes (Only meaningful in aal5snap encapsulation). |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.17 | ColumncdslAtmPvcOamRetryUpCount | read-only | current | This object indicates the OAM retry count before declaring a VC is up. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.18 | ColumncdslAtmPvcOamRetryDownCount | read-only | current | This object indicates the OAM retry count before declaring a VC is down. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.19 | ColumncdslAtmPvcOamPvcManaged | read-only | current | This object indicates whether to enable VC management on OAM in this PVC. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.20 | ColumncdslAtmPvcOamPvcLF | read-only | current | This object indicates the OAM loopback frequency(seconds) for this PVC. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.21 | ColumncdslAtmPvcProtocolIpBC | read-only | current | Pseudo-broadcast on the protocol IP inarp connections or not (Only meaningful in aal5snap encapsulation). |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.22 | ColumncdslAtmPvcProtocolIpxBC | read-only | current | This object indicates whether to allow Pseudo-broadcast on the protocol IPX inarp connections or not (Only meaningful in aal5snap encapsulation). |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.23 | ColumncdslAtmPvcUbrPCR | read-only | current | This object indicates the Ubr Peak Cell Rate. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.24 | ColumncdslAtmPvcUbrPlusPCR | read-only | current | This object indicates the Ubr+ Peak Cell Rate. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.25 | ColumncdslAtmPvcUbrPlusMCR | read-only | current | This object indicates the Ubr+ Minimum Guaranteed Cell Rate. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.26 | ColumncdslAtmPvcVbrNrtPCR | read-only | current | This object indicates the Vbr-Nrt Peak Cell Rate. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.27 | ColumncdslAtmPvcVbrNrtSCR | read-only | current | This object indicates the Vbr-Nrt Sustainable Cell Rate. |
| 1.3.6.1.4.1.9.10.30.1.4.2.1.28 | ColumncdslAtmPvcRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. When the row is created, but the minimun set of parameters is not al… |
| 1.3.6.1.4.1.9.10.30.1.5 | NodecdslVcClass | |||
| 1.3.6.1.4.1.9.10.30.1.5.1 | TablecdslVcClassNumberTable | not-accessible | current | This table reflects the number of VC classes that are presently set up in each NRP. |
| 1.3.6.1.4.1.9.10.30.1.5.1.1 | RowcdslVcClassNumberEntry | not-accessible | current | Entries are read only. |
| 1.3.6.1.4.1.9.10.30.1.5.1.1.1 | ColumncdslMaxVcClasses | read-only | current | This object indicates the maximum number of VC classes allowed. |
| 1.3.6.1.4.1.9.10.30.1.5.1.1.2 | ColumncdslVcClasses | read-only | current | This object indicates the number of VC classes presently set in each NRP identified by cdslNrpSlotIndex. |
| 1.3.6.1.4.1.9.10.30.1.5.2 | TablecdslVcClassTable | not-accessible | current | The entries in this table are vc-classes with at least one parameter configured. In other words, empty classes (with name only) will not be present in this tab… |
| 1.3.6.1.4.1.9.10.30.1.5.2.1 | RowcdslVcClassEntry | not-accessible | current | The VC Class entry is read-create. Each entry represents a VC class. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.1 | ColumncdslVcClassName | not-accessible | current | This object is used to identify the vc class. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.2 | ColumncdslVcClassType | read-only | current | This object indicates the type of the vc class. Atm is for Asynchronous transfer mode and funi for frame user network interface. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.3 | ColumncdslVcClassQosType | read-create | current | This object specifies the QOS type of the vc class. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.4 | ColumncdslVcClassAbrPCR | read-create | current | This object specifies Abr Peak Cell Rate. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.5 | ColumncdslVcClassAbrMcr | read-create | current | This object specifies Minimum Guaranteed Cell Rate. It shall be smaller than cdslVcClassAbrPCR. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.6 | ColumncdslVcClassAbrIORIF | read-create | current | This object specifies Abr inverse of rate increase factor (1/rif) to the power of two. Note that the actual value in the system is the power of two of this obj… |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.7 | ColumncdslVcClassAbrIORDF | read-create | current | Abr inverse of rate decrease factor (1/rdf) to the power of two. Note that the actual value is the power of two of this object. For example, value 5 of this ob… |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.8 | ColumncdslVcClassBroadcast | read-create | current | This object indicates whether to allow broadcast or not. When set the value, do not use unknown. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.9 | ColumncdslVcClassEncapsulation | read-create | current | This object specifies encapsulation method. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.10 | ColumncdslVcClassMuxLinkType | read-create | current | This object is used to specify the link type if the encapsulation is aal5mux. 1 for IP and 2 for PPP. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.11 | ColumncdslVcClassVirtualTemplate | read-create | current | The virtual template number. Value zero means not configured. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.12 | ColumncdslVcClassIdleTimeout | read-create | current | This object specifies idle timeout. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.13 | ColumncdslVcClassIdleMTR | read-create | current | This object specifies the minimum traffic rate to keep the connection. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.14 | ColumncdslVcClassILMIManage | read-create | current | This object specifies whether to allow ilmi manage or not. When set the value, do not use unknown. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.15 | ColumncdslVcClassInarp | read-create | current | This object specifies InARP Frequency in minutes. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.16 | ColumncdslVcClassOamRetryUpCount | read-create | current | OAM retry count before declaring a VC is up |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.17 | ColumncdslVcClassOamRetryDownCount | read-create | current | OAM retry count before declaring a VC is down |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.18 | ColumncdslVcClassOamPvcManaged | read-create | current | This object specifies whether to enable VC management on OAM in a PVC. When set the value, do not use unknown. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.19 | ColumncdslVcClassOamPvcLF | read-create | current | This object specifies the OAM loopback frequency. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.20 | ColumncdslVcClassOamSvcManaged | read-create | current | This object specifies whether to enable VC management on OAM on SVC SVC. When set the value, do not use unknown. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.21 | ColumncdslVcClassOamSvcLF | read-create | current | This object specifies the OAM loopback frequency for SVC |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.22 | ColumncdslVcClassProtocolIpBC | read-create | current | This object specifies whether to allow the pseudo-broadcast on the protocol IP inarp connections or not. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.23 | ColumncdslVcClassProtocolIpxBC | read-create | current | This object specifies whether to allow the pseudo-broadcast on the protocol IPX inarp connections or not. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.24 | ColumncdslVcClassTransmitPriority | read-create | current | This object specifies the transmit priority. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.25 | ColumncdslVcClassUbrPCR | read-create | current | This object specifies the Ubr Peak Cell Rate. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.26 | ColumncdslVcClassUbrInputPCR | read-create | current | This object specifies the Ubr Input Peak Cell Rate. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.27 | ColumncdslVcClassUbrPlusPCR | read-create | current | This object specifies the Ubr+ Peak Cell Rate. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.28 | ColumncdslVcClassUbrPlusMCR | read-create | current | This object specifies the Ubr+ Minimum Guaranteed Cell Rate. It shall be smaller than cdslVcClassUbrPlusPCR. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.29 | ColumncdslVcClassUbrPlusInputPCR | read-create | current | This object specifies the Ubr+ Input Peak Cell Rate. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.30 | ColumncdslVcClassUbrPlusInputMCR | read-create | current | This object specifies the Ubr+ Input Minimum Cell Rate. It shall be smaller than cdslVcClassUbrPlusInputPCR. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.31 | ColumncdslVcClassVbrNrtPCR | read-create | current | This object specifies the Vbr-Nrt Peak Cell Rate. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.32 | ColumncdslVcClassVbrNrtSCR | read-create | current | This object specifies the Vbr-Nrt Sustainable Cell Rate. It shall be smaller than cdslVcClassVbrNrtPCR. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.33 | ColumncdslVcClassVbrNrtInputBP | read-create | current | This object specifies the Vbr-Nrt Input Burst Parameter: rounded on AIP to the nearest 32, used as is on NPM. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.34 | ColumncdslVcClassVbrNrtInputPCR | read-create | current | This object specifies the Vbr-Nrt Input Peak Cell Rate. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.35 | ColumncdslVcClassVbrNrtInputSCR | read-create | current | This object specifies the Vbr-Nrt Input Sustainable Cell Rate. It shall be smaller than cdslVcClassVbrNrtInputPCR. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.36 | ColumncdslVcClassVbrNrtInputMBS | read-create | current | This object specifies the Input Maximum Burst Size. |
| 1.3.6.1.4.1.9.10.30.1.5.2.1.37 | ColumncdslVcClassRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. The return value of this object is always 'active', if the row exist… |
| 1.3.6.1.4.1.9.10.30.2 | NodeciscoDslProvMIBNotificationPrefix | |||
| 1.3.6.1.4.1.9.10.30.3 | NodeciscoDslProvMIBConformance | |||
| 1.3.6.1.4.1.9.10.30.3.1 | NodeciscoDslProvMIBCompliances | |||
| 1.3.6.1.4.1.9.10.30.3.1.1 | ComplianceciscoDslProvMIBBasicCompliance | current | The compliance statement for entities which implement the Cisco DSL Provision Management MIB. | |
| 1.3.6.1.4.1.9.10.30.3.2 | NodeciscoDslProvMIBGroups | |||
| 1.3.6.1.4.1.9.10.30.3.2.1 | GroupciscoNrpSlotGroup | current | The DSL Provision NRP Slot Group. | |
| 1.3.6.1.4.1.9.10.30.3.2.2 | GroupciscoVirtualTemplateGroup | current | The DSL Provision Virtual Template Interface Group. | |
| 1.3.6.1.4.1.9.10.30.3.2.3 | GroupciscoIpPoolGroup | current | The DSL Provision IP Pool Group. | |
| 1.3.6.1.4.1.9.10.30.3.2.4 | GroupciscoDslPVCGroup | current | The DSL Provision PVC Group. | |
| 1.3.6.1.4.1.9.10.30.3.2.5 | GroupciscoVcClassGroup | current | The DSL Provision VC Class Group. |