CISCO-DSPU-MIB
141 objects
Used to define and manage DSPU objects.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.24 | IdentityciscoDspuMIB | Used to define and manage DSPU objects. | ||
| 1.3.6.1.4.1.9.9.24.1 | NodedspuObjects | |||
| 1.3.6.1.4.1.9.9.24.1.1 | NodedspuNode | |||
| 1.3.6.1.4.1.9.9.24.1.1.1 | ScalardspuNodeRsrb | read-write | current | RSRB feature enabled/disabled for the DSPU node. TRUE -> RSRB feature enabled FALSE -> RSRB feature disabled If the RSRB feature is enabled, the following obje… |
| 1.3.6.1.4.1.9.9.24.1.1.2 | ScalardspuNodeRsrbLocalVirtualRing | read-write | current | Local virtual ring number used by the DSPU node. LocalVirtualRing is zero if RSRB is not enabled. |
| 1.3.6.1.4.1.9.9.24.1.1.3 | ScalardspuNodeRsrbBridgeNumber | read-write | current | Bridge number connecting the DSPU LocalVirtualRing with the RSRB TargetVirtualRing. Currently, the only valid BridgeNumber supported is 1. BridgeNumber must be… |
| 1.3.6.1.4.1.9.9.24.1.1.4 | ScalardspuNodeRsrbTargetVirtualRing | read-write | current | Target virtual ring number used for RSRB. TargetVirtualRing is zero if RSRB is not enabled. |
| 1.3.6.1.4.1.9.9.24.1.1.5 | ScalardspuNodeRsrbVirtualMacAddress | read-write | current | Virtual MAC address of the the DSPU node. VirtualMacAddress is zero if RSRB is not enabled. |
| 1.3.6.1.4.1.9.9.24.1.1.6 | ScalardspuNodeDefaultPu | read-write | current | Default-PU feature enabled/disabled for the DSPU node. TRUE -> Default-PU feature enabled FALSE -> Default-PU feature disabled |
| 1.3.6.1.4.1.9.9.24.1.1.7 | ScalardspuNodeDefaultPuWindowSize | read-write | current | Send/receive window size to be used across the link between the default-PU and a remote PU. |
| 1.3.6.1.4.1.9.9.24.1.1.8 | ScalardspuNodeDefaultPuMaxIframe | read-write | current | Maximum size of an I-frame that can be transmitted/received across the link between the default-PU and a remote PU. |
| 1.3.6.1.4.1.9.9.24.1.1.9 | ScalardspuNodeActivationWindow | read-write | current | Activation pacing window used by the DSPU node to limit the number of activation RUs sent for a given SAP before waiting for responses from the remote. |
| 1.3.6.1.4.1.9.9.24.1.1.10 | ScalardspuNodeLastConfigChgTime | read-only | current | Timestamp of last change to DSPU configuration parameters. LastConfigChgTime reflects any change in DSPU configuration. |
| 1.3.6.1.4.1.9.9.24.1.2 | NodedspuPoolClass | |||
| 1.3.6.1.4.1.9.9.24.1.2.1 | TabledspuPoolClassTable | not-accessible | current | Table listing defined pool classes for the DSPU node. A pool class is defined at the DSPU node as a pool of upstream LUs that may be shared among downstream PU… |
| 1.3.6.1.4.1.9.9.24.1.2.1.1 | RowdspuPoolClassEntry | not-accessible | current | Each entry represents a defined pool class. |
| 1.3.6.1.4.1.9.9.24.1.2.1.1.1 | ColumndspuPoolClassIndex | not-accessible | current | Index of a pool class entry in the dspuPoolClassTable. |
| 1.3.6.1.4.1.9.9.24.1.2.1.1.2 | ColumndspuPoolClassName | read-write | current | Name identifier of the pool class. |
| 1.3.6.1.4.1.9.9.24.1.2.1.1.3 | ColumndspuPoolClassInactivityTimeout | read-write | current | Value (in minutes) of the inactivity timeout that will be applied to active LU sessions assigned from the pool class. The inactivity timeout feature for pooled… |
| 1.3.6.1.4.1.9.9.24.1.2.1.1.4 | ColumndspuPoolClassOperUpStreamLuDefs | read-only | current | Number of upstream LUs defined in the pool class. |
| 1.3.6.1.4.1.9.9.24.1.2.1.1.5 | ColumndspuPoolClassOperDnStreamLuDefs | read-only | current | Number of downstream LUs defined in the pool class. |
| 1.3.6.1.4.1.9.9.24.1.3 | NodedspuPooledLu | |||
| 1.3.6.1.4.1.9.9.24.1.3.1 | TabledspuPooledLuTable | not-accessible | current | Table listing all LUs defined in a specified pool class. The entries in the table provide information such that the downstream LUs in the pool can be correlate… |
| 1.3.6.1.4.1.9.9.24.1.3.1.1 | RowdspuPooledLuEntry | not-accessible | current | Each entry represents an LU that is defined as a member of the specified pool class. |
| 1.3.6.1.4.1.9.9.24.1.3.1.1.1 | ColumndspuPooledLuPeerPuIndex | read-only | current | Index (dspuPuOperIndex) of the peer PU that owns the peer LU. PeerPuIndex is zero if peer LU has not been assigned. |
| 1.3.6.1.4.1.9.9.24.1.3.1.1.2 | ColumndspuPooledLuPeerLuLocalAddress | read-only | current | NAU address (dspuLuOperLuLocalAddress) of the peer LU. PeerLuLocalAddress is zero if peer LU has not been assigned. |
| 1.3.6.1.4.1.9.9.24.1.4 | NodedspuPu | |||
| 1.3.6.1.4.1.9.9.24.1.4.1 | TabledspuPuAdminTable | not-accessible | current | Table listing all defined upstream/downstream PUs that are owned by the DSPU node. NOTE: The dspuPuAdminTable does not include default downstream PUs that may … |
| 1.3.6.1.4.1.9.9.24.1.4.1.1 | RowdspuPuAdminEntry | not-accessible | current | Each entry represents a defined upstream/downstream PU. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.1 | ColumndspuPuAdminIndex | not-accessible | current | Index of the PU entry in the dspuPuAdminTable. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.2 | ColumndspuPuAdminName | read-create | current | Name of the PU. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.3 | ColumndspuPuAdminType | read-create | current | PU Type is either upstream or downstream. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.4 | ColumndspuPuAdminRemoteMacAddress | read-create | current | MAC address of the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.5 | ColumndspuPuAdminRemoteSapAddress | read-create | current | SAP address of the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.6 | ColumndspuPuAdminLocalSapAddress | read-create | current | SAP address of the local PU. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.7 | ColumndspuPuAdminXid | read-create | current | Upstream PU : XID that will be sent to the remote PU. Dnstream PU : XID that must be received from the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.8 | ColumndspuPuAdminXidFmt | read-create | current | Type of XID format used during activation of the link between this dspuNode and the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.9 | ColumndspuPuAdminWindowSize | read-create | current | Send/Receive window size to be used across the link between this dspuNode and the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.10 | ColumndspuPuAdminMaxIframe | read-create | current | Maximum size of an I-frame that can be transmitted/received across the link between this dspuNode and the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.11 | ColumndspuPuAdminLinkRetryCount | read-create | current | Number of times that the DSPU node will attempt to activate the link between the dspuNode and the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.12 | ColumndspuPuAdminLinkRetryTimeout | read-create | current | Value (in seconds) for the delay between link activation attempts between the dspuNode and the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.13 | ColumndspuPuAdminStartPu | read-create | current | Attempt link activation with the remote PU. TRUE -> Attempt link activation with remote PU. FALSE -> Do not attempt link activation with remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.14 | ColumndspuPuAdminDlcType | read-create | current | DLC type used by the dspuNode for link activation with the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.15 | ColumndspuPuAdminDlcUnit | read-create | current | DLC unit used by the dspuNode for link activation with the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.16 | ColumndspuPuAdminDlcPort | read-create | current | DLC port used by the dspuNode for link activation with the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.17 | ColumndspuPuAdminFocalPoint | read-create | current | PU serves as a focal point for alert forwarding. TRUE -> PU serves as focal point FALSE -> PU does not serve as focal point Only an upstream PU may be defined … |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.18 | ColumndspuPuAdminRowStatus | read-create | current | Used by a Management Station to create or delete the row entry in the dspuPuAdminTable following the RowStatus textual convention. Upon successful creation of … |
| 1.3.6.1.4.1.9.9.24.1.4.1.1.19 | ColumndspuPuAdminRemoteAddress | read-create | current | Poll address, DLCI, or subscriber address associated with the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2 | TabledspuPuOperTable | not-accessible | current | Table listing all active upstream/downstream PUs that are owned by the DSPU node (including default PUs). NOTE: In addition to the explicitly defined PUs from … |
| 1.3.6.1.4.1.9.9.24.1.4.2.1 | RowdspuPuOperEntry | not-accessible | current | Each entry represents an active upstream/downstream PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.1 | ColumndspuPuOperIndex | not-accessible | current | Index of the PU entry in dspuPuOperTable. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.2 | ColumndspuPuOperName | read-only | current | Name of the PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.3 | ColumndspuPuOperType | read-only | current | PU type is either upstream or downstream. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.4 | ColumndspuPuOperRemoteMacAddress | read-only | current | MAC address of the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.5 | ColumndspuPuOperRemoteSapAddress | read-only | current | SAP address of the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.6 | ColumndspuPuOperLocalSapAddress | read-only | current | SAP address of the local PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.7 | ColumndspuPuOperXid | read-only | current | Upstream PU : XID that was sent to the remote PU. Dnstream PU : XID that was received from the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.8 | ColumndspuPuOperXidFmt | read-only | current | Type of XID format used during activation of the link between this dspuNode and the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.9 | ColumndspuPuOperWindowSize | read-only | current | Send/Receive window size to be used across the link between this dspuNode and the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.10 | ColumndspuPuOperMaxIframe | read-only | current | Maximum size of an I-frame that can be transmitted/received across the link between this dspuNode and the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.11 | ColumndspuPuOperLinkRetryCount | read-only | current | Number of times that the DSPU node will attempt to activate the link between the dspuNode and the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.12 | ColumndspuPuOperLinkRetryTimeout | read-only | current | Value (in seconds) for the delay between link activation attempts between the dspuNode and the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.13 | ColumndspuPuOperStartPu | read-only | current | Attempt link activation with the remote PU. TRUE -> Attempt link activation with remote PU. FALSE -> Do not attempt link activation with remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.14 | ColumndspuPuOperDlcType | read-only | current | DLC type used by the dspuNode for link activation with the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.15 | ColumndspuPuOperDlcUnit | read-only | current | DLC unit used by the dspuNode for link activation with the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.16 | ColumndspuPuOperDlcPort | read-only | current | DLC port used by the dspuNode for link activation with the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.17 | ColumndspuPuOperFocalPoint | read-only | current | PU serves as a focal point for alert forwarding. TRUE -> PU serves as focal point FALSE -> PU does not serve as focal point Only an upstream PU may be defined … |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.18 | ColumndspuPuOperState | read-only | current | Operational state of PU is either active or inactive. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.19 | ColumndspuPuOperFsmState | read-only | current | Current FSM state of the PU as follows: linkReset - Link is in reset state - not connected linkPendConnOut - Pending ConnectOut to establish link linkPendConnI… |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.20 | ColumndspuPuOperStartTime | read-only | current | Timestamp of PU activation (when ACTPU +rsp received). |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.21 | ColumndspuPuOperLastStateChgTime | read-only | current | TimeStamp of last PU state change between active<->inactive. |
| 1.3.6.1.4.1.9.9.24.1.4.2.1.22 | ColumndspuPuOperRemoteAddress | read-only | current | Poll address, DLCI, or subscriber address associated with the remote PU. |
| 1.3.6.1.4.1.9.9.24.1.4.3 | TabledspuPuStatsTable | not-accessible | current | Table listing the statistics recorded for each PU. |
| 1.3.6.1.4.1.9.9.24.1.4.3.1 | RowdspuPuStatsEntry | not-accessible | current | Each entry represents an active upstream/downstream PU and has a corresponding entry in the dspuPuOperTable. |
| 1.3.6.1.4.1.9.9.24.1.4.3.1.1 | ColumndspuPuStatsSentBytes | read-only | current | Number of bytes sent by this PU. |
| 1.3.6.1.4.1.9.9.24.1.4.3.1.2 | ColumndspuPuStatsRcvdBytes | read-only | current | Number of bytes received by this PU. |
| 1.3.6.1.4.1.9.9.24.1.4.3.1.3 | ColumndspuPuStatsSentFrames | read-only | current | Number of frames sent by this PU. |
| 1.3.6.1.4.1.9.9.24.1.4.3.1.4 | ColumndspuPuStatsRcvdFrames | read-only | current | Number of frames received by this PU. |
| 1.3.6.1.4.1.9.9.24.1.4.3.1.5 | ColumndspuPuStatsSentNegativeRsps | read-only | current | Number of negative responses sent by this PU. |
| 1.3.6.1.4.1.9.9.24.1.4.3.1.6 | ColumndspuPuStatsRcvdNegativeRsps | read-only | current | Number of negative responses received by this PU. |
| 1.3.6.1.4.1.9.9.24.1.4.3.1.7 | ColumndspuPuStatsActiveLus | read-only | current | Number of active LUs on this PU (LU becomes active when ACTLU +rsp received). |
| 1.3.6.1.4.1.9.9.24.1.4.3.1.8 | ColumndspuPuStatsInactiveLus | read-only | current | Number of inactive LUs on this PU (LU is inactive until ACTLU rq or ACTLU +rsp received). |
| 1.3.6.1.4.1.9.9.24.1.4.3.1.9 | ColumndspuPuStatsBindLus | read-only | current | Number of LUs on this PU which are active-in-session. (LU is active-in-session when BIND rq received) |
| 1.3.6.1.4.1.9.9.24.1.4.3.1.10 | ColumndspuPuStatsActivationFailures | read-only | current | Number of activation failures for this PU. |
| 1.3.6.1.4.1.9.9.24.1.4.3.1.11 | ColumndspuPuStatsLastActivationFailureReason | read-only | current | Reason for last activation failure of this PU as follows: noError - No PU activation failure has been detected otherError - Undefined error detected during PU … |
| 1.3.6.1.4.1.9.9.24.1.4.4 | NodedspuPuTraps | |||
| 1.3.6.1.4.1.9.9.24.1.4.4.0 | NodedspuPuTrapsPrefix | |||
| 1.3.6.1.4.1.9.9.24.1.4.4.0.1 | NotificationnewdspuPuStateChangeTrap | current | Generated when the operational state of the PU changes between active< The following information is returned: dspuPuOperName -> PU name dspuPuOperState -> Curr… | |
| 1.3.6.1.4.1.9.9.24.1.4.4.0.2 | NotificationnewdspuPuActivationFailureTrap | current | Generated whenever a PU activation failure is detected. The following information is returned: dspuPuOperName -> PU name dspuPuOperState -> Current operational… | |
| 1.3.6.1.4.1.9.9.24.1.4.4.1 | NotificationdspuPuStateChangeTrap | obsolete | Generated when the operational state of the PU changes between active< The following information is returned: dspuPuOperName -> PU name dspuPuOperState -> Curr… | |
| 1.3.6.1.4.1.9.9.24.1.4.4.2 | NotificationdspuPuActivationFailureTrap | obsolete | Generated whenever a PU activation failure is detected. The following information is returned: dspuPuOperName -> PU name dspuPuOperState -> Current operational… | |
| 1.3.6.1.4.1.9.9.24.1.5 | NodedspuLu | |||
| 1.3.6.1.4.1.9.9.24.1.5.1 | TabledspuLuAdminTable | not-accessible | current | Table listing all LUs owned by the PU. NOTE: The dspuLuAdminTable does not include LUs owned by default downstream PUs that may be dynamically created. |
| 1.3.6.1.4.1.9.9.24.1.5.1.1 | RowdspuLuAdminEntry | not-accessible | current | Each entry represents a defined LU owned by the PU. |
| 1.3.6.1.4.1.9.9.24.1.5.1.1.1 | ColumndspuLuAdminLuLocalAddress | not-accessible | current | NAU address of the local LU. |
| 1.3.6.1.4.1.9.9.24.1.5.1.1.2 | ColumndspuLuAdminType | read-create | current | LU type is either pooled or dedicated. |
| 1.3.6.1.4.1.9.9.24.1.5.1.1.3 | ColumndspuLuAdminPoolClassName | read-create | current | Pool class to which the LU is defined as a member. The dspuLuAdminPoolClassName is valid for pooled LUs only. |
| 1.3.6.1.4.1.9.9.24.1.5.1.1.4 | ColumndspuLuAdminPeerPuIndex | read-create | current | For downstream LUs, the PeerPuIndex identifies the upstream PU that owns the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerPuI… |
| 1.3.6.1.4.1.9.9.24.1.5.1.1.5 | ColumndspuLuAdminPeerLuLocalAddress | read-create | current | For downstream LUs, the PeerLuLocalAddress identifies the NAU address of the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerLuL… |
| 1.3.6.1.4.1.9.9.24.1.5.1.1.6 | ColumndspuLuAdminRowStatus | read-create | current | Used by a Management Station to create or delete the row entry in the dspuLuAdminTable following the RowStatus textual convention. Upon successful creation of … |
| 1.3.6.1.4.1.9.9.24.1.5.2 | TabledspuLuOperTable | not-accessible | current | Table listing all LUs owned by the PU. NOTE: In addition to the LUs owned by explicitly defined PUs from the dspuLuAdminTable, the dspuLuOperTable also include… |
| 1.3.6.1.4.1.9.9.24.1.5.2.1 | RowdspuLuOperEntry | not-accessible | current | Each entry represents a defined LU owned by the PU. |
| 1.3.6.1.4.1.9.9.24.1.5.2.1.1 | ColumndspuLuOperLuLocalAddress | not-accessible | current | NAU address of the local LU. |
| 1.3.6.1.4.1.9.9.24.1.5.2.1.2 | ColumndspuLuOperType | read-only | current | LU type is either pooled or dedicated. |
| 1.3.6.1.4.1.9.9.24.1.5.2.1.3 | ColumndspuLuOperPoolClassName | read-only | current | Pool class to which the LU is defined as a member. The dspuLuOperPoolClassName is valid for pooled LUs only. |
| 1.3.6.1.4.1.9.9.24.1.5.2.1.4 | ColumndspuLuOperPeerPuIndex | read-only | current | For downstream LUs, the PeerPuIndex identifies the upstream PU that owns the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerPuI… |
| 1.3.6.1.4.1.9.9.24.1.5.2.1.5 | ColumndspuLuOperPeerLuLocalAddress | read-only | current | For downstream LUs, the PeerLuLocalAddress identifies the NAU address of the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerLuL… |
| 1.3.6.1.4.1.9.9.24.1.5.2.1.6 | ColumndspuLuOperState | read-only | current | Operational state of LU is either active or inactive. |
| 1.3.6.1.4.1.9.9.24.1.5.2.1.7 | ColumndspuLuOperFsmState | read-only | current | Current FSM state of the LU as follows: reset - neither dnLu or upLu active dnLuStarted - dnLu active, upLu inactive upLuActive - upLu active, dnLu inactive dn… |
| 1.3.6.1.4.1.9.9.24.1.5.2.1.8 | ColumndspuLuOperSessionState | read-only | current | Operational state of LU session is either bound or unbound. |
| 1.3.6.1.4.1.9.9.24.1.5.2.1.9 | ColumndspuLuOperLastActivationFailureReason | read-only | current | Reason for last activation failure of this PU as follows: noError - No LU activation failure has been detected otherError - Undefined error detected during LU … |
| 1.3.6.1.4.1.9.9.24.1.5.3 | NodedspuLuTraps | |||
| 1.3.6.1.4.1.9.9.24.1.5.3.0 | NodedspuLuTrapsPrefix | |||
| 1.3.6.1.4.1.9.9.24.1.5.3.0.1 | NotificationnewdspuLuStateChangeTrap | current | Generated when the operational state of the LU changes between active< The following information is returned: dspuPuOperName -> PU name dspuLuOperState -> Curr… | |
| 1.3.6.1.4.1.9.9.24.1.5.3.0.2 | NotificationdspuLuActivationFailureTrap | current | Generated whenever an LU activation failure is detected. The following information is returned: dspuPuOperName -> PU name dspuLuOperState -> Current operationa… | |
| 1.3.6.1.4.1.9.9.24.1.5.3.1 | NotificationdspuLuStateChangeTrap | obsolete | Generated when the operational state of the PU changes between active< The following information is returned: dspuPuOperName -> PU name dspuLuOperLuLocalAddres… | |
| 1.3.6.1.4.1.9.9.24.1.6 | NodedspuSap | |||
| 1.3.6.1.4.1.9.9.24.1.6.1 | TabledspuSapTable | not-accessible | current | Table listing the SAPs that are enabled for the DSPU node. |
| 1.3.6.1.4.1.9.9.24.1.6.1.1 | RowdspuSapEntry | not-accessible | current | Each entry represents an enabled SAP for the DSPU node. |
| 1.3.6.1.4.1.9.9.24.1.6.1.1.1 | ColumndspuSapAddress | not-accessible | current | SAP address of the local SAP. |
| 1.3.6.1.4.1.9.9.24.1.6.1.1.2 | ColumndspuSapType | read-create | current | Local SAP type is either upstreamSap or downstreamSap. |
| 1.3.6.1.4.1.9.9.24.1.6.1.1.3 | ColumndspuSapDlcType | not-accessible | current | DLC type of the adapter that owns the local SAP. |
| 1.3.6.1.4.1.9.9.24.1.6.1.1.4 | ColumndspuSapDlcUnit | not-accessible | current | DLC unit of the adapter that owns the local SAP. |
| 1.3.6.1.4.1.9.9.24.1.6.1.1.5 | ColumndspuSapDlcPort | not-accessible | current | DLC port of the adapter that owns the local SAP. |
| 1.3.6.1.4.1.9.9.24.1.6.1.1.6 | ColumndspuSapOperState | read-only | current | Operational state of the local SAP as follows: - sapClosed - sapOpening - sapOpened - sapClosing |
| 1.3.6.1.4.1.9.9.24.1.6.1.1.7 | ColumndspuSapRowStatus | read-create | current | This object is used by a Management Station to create or delete the row entry in the dspuSapTable following the RowStatus textual convention. The Management St… |
| 1.3.6.1.4.1.9.9.24.1.6.2 | NodedspuSapTraps | |||
| 1.3.6.1.4.1.9.9.24.1.6.2.1 | NotificationdspuSapStateChangeTrap | obsolete | Generated when the operational state of the SAP changes between 'open' or 'closed'. The following information is returned: dspuSapOperDlcType -> DLC type of th… | |
| 1.3.6.1.4.1.9.9.24.2 | NodeciscoDspuMIBConformance | |||
| 1.3.6.1.4.1.9.9.24.2.1 | NodeciscoDspuMIBCompliances | |||
| 1.3.6.1.4.1.9.9.24.2.1.1 | ComplianceciscoDspuMIBCompliance | obsolete | The compliance statement for the SNMPv2 entities which implement the Cisco DSPU MIB. | |
| 1.3.6.1.4.1.9.9.24.2.1.2 | ComplianceciscoDspuMIBComplianceV11R01 | current | The compliance statement for the SNMPv2 entities which implement the Cisco DSPU MIB. | |
| 1.3.6.1.4.1.9.9.24.2.2 | NodeciscoDspuMIBGroups | |||
| 1.3.6.1.4.1.9.9.24.2.2.1 | GroupdspuNodeGroup | current | Global DSPU node information | |
| 1.3.6.1.4.1.9.9.24.2.2.2 | GroupdspuPoolClassGroup | current | LU pool class information | |
| 1.3.6.1.4.1.9.9.24.2.2.3 | GroupdspuPooledLuGroup | current | Pooled LU information | |
| 1.3.6.1.4.1.9.9.24.2.2.4 | GroupdspuPuGroup | obsolete | Upstream/Downstream PU node information | |
| 1.3.6.1.4.1.9.9.24.2.2.5 | GroupdspuLuGroup | obsolete | Upstream/Downstream LU information | |
| 1.3.6.1.4.1.9.9.24.2.2.6 | GroupdspuSapGroup | current | Local SAP information | |
| 1.3.6.1.4.1.9.9.24.2.2.7 | GroupdspuPuGroupV11R01 | current | Upstream/Downstream PU node information | |
| 1.3.6.1.4.1.9.9.24.2.2.8 | GroupdspuLuGroupV11R01 | current | Upstream/Downstream LU information |