CISCO-ENTITY-ALARM-MIB
63 objects
This MIB module defines the managed objects that support the monitoring of alarms generated by physical entities contained by the system, including chassis, slots, modules, ports, power supplies, and fans. In order to monitor alarms generated by a physical entity, it must be represented by a row in the entPhysicalTable (see ENTITY-MIB).
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | Unsigned32 |
| ENTITY-MIB | entPhysicalIndex PhysicalIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | -- NOTIFICATION-GROUP MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | AutonomousType DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.138 | IdentityciscoEntityAlarmMIB | This MIB module defines the managed objects that support the monitoring of alarms generated by physical entities contained by the system, including chassis, sl… | ||
| 1.3.6.1.4.1.9.9.138.1 | NodeciscoEntityAlarmMIBObjects | |||
| 1.3.6.1.4.1.9.9.138.1.1 | NodeceAlarmDescription | |||
| 1.3.6.1.4.1.9.9.138.1.1.1 | TableceAlarmDescrMapTable | not-accessible | current | For each type of entity (represented entPhysicalVendorType OID), this table contains a mapping between a unique ceAlarmDescrIndex and entPhysicalvendorType OID. |
| 1.3.6.1.4.1.9.9.138.1.1.1.1 | RowceAlarmDescrMapEntry | not-accessible | current | A mapping between an alarm description and a vendor type. |
| 1.3.6.1.4.1.9.9.138.1.1.1.1.1 | ColumnceAlarmDescrIndex | not-accessible | current | This object uniquely identifies an alarm description. |
| 1.3.6.1.4.1.9.9.138.1.1.1.1.2 | ColumnceAlarmDescrVendorType | read-only | current | This object specifies an object identifier (typically an enterprise-specific OID) that uniquely identifies the vendor type of those physical entities that this… |
| 1.3.6.1.4.1.9.9.138.1.1.2 | TableceAlarmDescrTable | not-accessible | current | This table contains a description for each alarm type defined by each vendor type employed by the system. Observe that this table is sparse in nature, as it is… |
| 1.3.6.1.4.1.9.9.138.1.1.2.1 | RowceAlarmDescrEntry | not-accessible | current | A collection of attributes that describe an alarm type. |
| 1.3.6.1.4.1.9.9.138.1.1.2.1.1 | ColumnceAlarmDescrAlarmType | not-accessible | current | This object specifies the alarm type being described. |
| 1.3.6.1.4.1.9.9.138.1.1.2.1.2 | ColumnceAlarmDescrSeverity | read-write | current | This object specifies the severity associated with the alarm type. An implementation may chose to not allow dynamic severity assignment, in which case it would… |
| 1.3.6.1.4.1.9.9.138.1.1.2.1.3 | ColumnceAlarmDescrText | read-only | current | This object specifies a human-readable message describing the alarm. |
| 1.3.6.1.4.1.9.9.138.1.2 | NodeceAlarmMonitoring | |||
| 1.3.6.1.4.1.9.9.138.1.2.1 | ScalarceAlarmCriticalCount | read-only | current | The value of this object specifies the number of alarms currently asserted with a severity of 'critical'. |
| 1.3.6.1.4.1.9.9.138.1.2.2 | ScalarceAlarmMajorCount | read-only | current | The value of this object specifies the number of alarms currently asserted with a severity of 'major'. |
| 1.3.6.1.4.1.9.9.138.1.2.3 | ScalarceAlarmMinorCount | read-only | current | The value of this object specifies the number of alarms currently asserted with a severity of 'minor'. |
| 1.3.6.1.4.1.9.9.138.1.2.4 | ScalarceAlarmCutOff | read-write | current | If the management client writes a value of 'true' to this object, the agent stops signalling all external audible alarms under the control of the agent. Readin… |
| 1.3.6.1.4.1.9.9.138.1.2.5 | TableceAlarmTable | not-accessible | current | This table specifies alarm control and status information related to each physical entity contained by the system, including the alarms currently being asserte… |
| 1.3.6.1.4.1.9.9.138.1.2.5.1 | RowceAlarmEntry | not-accessible | current | Alarm control and status information related to the corresponding physical entity, including a list of those alarms currently being asserted by that physical e… |
| 1.3.6.1.4.1.9.9.138.1.2.5.1.1 | ColumnceAlarmFilterProfile | read-write | current | This object specifies the alarm filter profile associated with the corresponding physical entity. An alarm filter profile controls which alarm types the agent … |
| 1.3.6.1.4.1.9.9.138.1.2.5.1.2 | ColumnceAlarmSeverity | read-only | current | This object specifies the highest severity alarm currently being asserted by the corresponding physical entity. A value of '0' indicates that there the corresp… |
| 1.3.6.1.4.1.9.9.138.1.2.5.1.3 | ColumnceAlarmList | read-only | current | This object specifies those alarms currently being asserted by the corresponding physical entity. Note, an alarm indicates a condition, not an event. An alarm … |
| 1.3.6.1.4.1.9.9.138.1.3 | NodeceAlarmHistory | |||
| 1.3.6.1.4.1.9.9.138.1.3.1 | ScalarceAlarmHistTableSize | read-write | current | This object specifies the number of entries that the ceAlarmHistTable can contain. When a physical entity generates an unfiltered alarm, and the capacity of th… |
| 1.3.6.1.4.1.9.9.138.1.3.2 | ScalarceAlarmHistLastIndex | read-only | current | This object specifies the value of the ceAlarmHistIndex object corresponding to the last entry added to the table by the agent. If the management client uses t… |
| 1.3.6.1.4.1.9.9.138.1.3.3 | TableceAlarmHistTable | not-accessible | current | This table contains a history of ceAlarmIndicate and ceAlarmClear traps generated by the agent. |
| 1.3.6.1.4.1.9.9.138.1.3.3.1 | RowceAlarmHistEntry | not-accessible | current | The information conveyed by a ceAlarmIndicate or ceAlarmClear trap. |
| 1.3.6.1.4.1.9.9.138.1.3.3.1.1 | ColumnceAlarmHistIndex | not-accessible | current | An integer value uniquely identifying the entry in the table. The value of this object starts at '1' and monotonically increases for each alarm condition trans… |
| 1.3.6.1.4.1.9.9.138.1.3.3.1.2 | ColumnceAlarmHistType | read-only | current | This object specifies whether the agent created the entry as the result of an alarm being asserted or cleared. |
| 1.3.6.1.4.1.9.9.138.1.3.3.1.3 | ColumnceAlarmHistEntPhysicalIndex | read-only | current | This object specifies the physical entity that generated the alarm. |
| 1.3.6.1.4.1.9.9.138.1.3.3.1.4 | ColumnceAlarmHistAlarmType | read-only | current | This object specifies the type of alarm generated. |
| 1.3.6.1.4.1.9.9.138.1.3.3.1.5 | ColumnceAlarmHistSeverity | read-only | current | This object specifies the severity of the alarm generated. |
| 1.3.6.1.4.1.9.9.138.1.3.3.1.6 | ColumnceAlarmHistTimeStamp | read-only | current | This object specifies the value of the sysUpTime object at the time the alarm was generated. |
| 1.3.6.1.4.1.9.9.138.1.4 | NodeceAlarmFiltering | |||
| 1.3.6.1.4.1.9.9.138.1.4.1 | ScalarceAlarmNotifiesEnable | read-write | current | This object specifies a severity threshold governing the generation of ceAlarmAsserted and ceAlarmCleared notifications. For example, if the value of this obje… |
| 1.3.6.1.4.1.9.9.138.1.4.2 | ScalarceAlarmSyslogEnable | read-write | current | This object specifies a severity threshold governing the generation of syslog messages corresponding to alarms. For example, if the value of this object is set… |
| 1.3.6.1.4.1.9.9.138.1.4.3 | ScalarceAlarmFilterProfileIndexNext | read-only | current | This object contains an appropriate value to be used for ceAlarmFilterIndex when creating entries in the ceAlarmFilterProfileTable. The value '0' indicates tha… |
| 1.3.6.1.4.1.9.9.138.1.4.4 | TableceAlarmFilterProfileTable | not-accessible | current | This table contains a list of alarm filter profiles. |
| 1.3.6.1.4.1.9.9.138.1.4.4.1 | RowceAlarmFilterProfileEntry | not-accessible | current | When a physical entity asserts/clears an alarm AND the ceAlarmFilterProfile object is not '0', the agent applies the specified alarm filter profile in processi… |
| 1.3.6.1.4.1.9.9.138.1.4.4.1.1 | ColumnceAlarmFilterIndex | not-accessible | current | This object uniquely identifies the alarm filter profile. |
| 1.3.6.1.4.1.9.9.138.1.4.4.1.2 | ColumnceAlarmFilterStatus | read-create | current | This object facilitates the creation, modification, or deletion of a conceptual row in this table. A management client can create a conceptual row in this tabl… |
| 1.3.6.1.4.1.9.9.138.1.4.4.1.3 | ColumnceAlarmFilterAlias | read-create | current | This object specifies an arbitrary name associated with the alarm filter profile by the management client, and provides a non-volatile 'handle' for the alarm f… |
| 1.3.6.1.4.1.9.9.138.1.4.4.1.4 | ColumnceAlarmFilterAlarmsEnabled | read-create | current | This object specifies a list of alarms that are enabled. |
| 1.3.6.1.4.1.9.9.138.1.4.4.1.5 | ColumnceAlarmFilterNotifiesEnabled | read-create | current | This object specifies a list of alarms for which notification generation is enabled. |
| 1.3.6.1.4.1.9.9.138.1.4.4.1.6 | ColumnceAlarmFilterSyslogEnabled | read-create | current | This object specifies a list of alarms for which syslog message generation is enabled. |
| 1.3.6.1.4.1.9.9.138.2 | NodeciscoEntityAlarmMIBNotificationsPrefix | |||
| 1.3.6.1.4.1.9.9.138.2.0 | NodeciscoEntityAlarmMIBNotifications | |||
| 1.3.6.1.4.1.9.9.138.2.0.1 | NotificationceAlarmAsserted | current | The agent generates this trap when a physical entity asserts an alarm. | |
| 1.3.6.1.4.1.9.9.138.2.0.2 | NotificationceAlarmCleared | current | The agent generates this trap when a physical entity clears a previously asserted alarm. | |
| 1.3.6.1.4.1.9.9.138.3 | NodeciscoEntityAlarmMIBConformance | |||
| 1.3.6.1.4.1.9.9.138.3.1 | NodeciscoEntityAlarmMIBCompliances | |||
| 1.3.6.1.4.1.9.9.138.3.1.1 | ComplianceceAlarmMIBCompliance | current | The compliance statement for entities that implement the CISCO-ALARM-MIB. Implementation of this MIB module is strongly recommended for any platform targeted f… | |
| 1.3.6.1.4.1.9.9.138.3.2 | NodeciscoEntityAlarmMIBGroups | |||
| 1.3.6.1.4.1.9.9.138.3.2.1 | GroupceAlarmDescriptionGroup | current | A collection of managed objects defining the description of alarms. | |
| 1.3.6.1.4.1.9.9.138.3.2.2 | GroupceAlarmGroup | current | A collection of managed objects defining alarm reporting by physical entity. | |
| 1.3.6.1.4.1.9.9.138.3.2.3 | GroupceAlarmHistGroup | current | A collection of managed objects defining alarm logging. | |
| 1.3.6.1.4.1.9.9.138.3.2.4 | GroupceAlarmFilterGroup | current | A collection of managed objects that control the generation of all notifications and syslog messages. | |
| 1.3.6.1.4.1.9.9.138.3.2.5 | GroupceAlarmFilterProfileGroup | current | A collection of managed objects that support alarm filtering. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlarmFilterProfileType | Unsigned32 | current | An integer value that uniquely identifies an alarm filter profile. |
| AlarmList | OCTET STRING (SIZE (0..32)) | current | For each unique type of physical entity (i.e., for each set of physical entities sharing a unique entPhysicalVendorType OID), there an exists unique alarm space. Observe that it is not necessary that all the alarms with… |
| AlarmSeverity | INTEGER { critical(1), major(2), minor(3), info(4) } | current | Each alarm type defined by a vendor type employed by the system has an associated severity. Bellcore TR-NWT-000474 defines these severities as follows: 'critical' An alarm used to indicate a severe, service- affecting c… |
| AlarmSeverityOrZero | INTEGER (0..4) | current | A value of either '0' or a valid alarm severity. |
| AlarmType | INTEGER (0..255) | current | An arbitrary integer value that uniquely identifies an event relative to a physical entity contained by a system. |