MIB Viewer

CISCO-ENTITY-DIAG-MIB

127 objects
This MIB module defines the managed objects that describe the online diagnostics capabilities supported by the physical entities contained by the system, including chassis, modules, ports, power supplies, fans, and sensors. In order to manage the online diagnostic capabilities supported by a physical entity, it must be represented by a conceptual row in the entPhysicalTable of the ENTITY-MIB (RFC-2737). GLOSSARY Boot-up Diagnostic - a diagnostic consisting of tests intended to be executed in a reasonable timeframe when a physical entity boots. Diagnostic - a suite of tests intended to exercise the functional integrity of a physical entity. Diagnostic Level - the degree of completeness that a diagnostic will exercise a physical entity. Field Diagnostic - a special suite of tests intended to exercise the functional integrity of a physical entity in a manner that is possible when a physical entity is operational or running an operational image. Field Diagnostic Image - an image supporting field diagnostics. A physical entity has to be loaded with a field diagnostic image before field diagnostics can be executed on the physical entity. Health Monitoring - the process of running special non-intrusive online tests periodically on a physical entity for the purpose of tracking the overall condition of a physical entity. On-Demand Diagnostic - a diagnostic intended to be executed immediately upon request. Offline Diagnostic - a diagnostic that consists of tests that are disruptive in nature, and thus requires the physical entity being evaluated to be taken offline for the duration. Online Diagnostic - a diagnostic that consists of tests that are not disruptive in nature, and thus can be done without taking the physical entity offline. Physical Entity - an identifiable physical resource, such as a chassis, line card, power supply, or communication port. See RFC-2737, 'Entity MIB (Version 2)', K. McCloghrie and A. Bierman. Scheduled Diagnostic - a diagnostic intended to execute at some time in the future. There exist two types of scheduled diagnostics: 1) one-shot, which execute only once; and 2) periodic, which executes at a specific interval. Test - an exercise intended to determine the functional integrity of a component comprising a physical entity (e.g., a port might support an internal loopback test). Diagnostic Job - Consists of a diagnostic suite (i.e., a collection of tests) to be executed by a physical entity.
Imported Objects
CISCO-ENTITY-DIAG-TC-MIBCeDiagDiagnosticLevel CeDiagDiagnosticMethod CeDiagErrorIdentifier CeDiagErrorIdentifierOrZero CeDiagJobIdentifier CeDiagJobSuite CeDiagPortList CeDiagTestIdentifier CeDiagTestList
CISCO-SMIciscoMgmt
CISCO-TCEntPhysicalIndexOrZero
ENTITY-MIBentPhysicalDescr entPhysicalIndex PhysicalIndex
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime RowStatus TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.9.350IdentityciscoEntityDiagMIBThis MIB module defines the managed objects that describe the online diagnostics capabilities supported by the physical entities contained by the system, inclu…
1.3.6.1.4.1.9.9.350.0NodeciscoEntityDiagMIBNotifs
1.3.6.1.4.1.9.9.350.0.1NotificationceDiagBootUpFailedNotifcurrentA ceDiagBootUpFailedNotif is sent if the online diagnostic discovers a boot up failure for a physical entity.
1.3.6.1.4.1.9.9.350.0.2NotificationceDiagHMThresholdReachedNotifcurrentA ceDiagHMThresholdReachedNotif is sent if the number of consecutive failure of a Health Monitoring test reaches the configured threshold.
1.3.6.1.4.1.9.9.350.0.3NotificationceDiagHMTestRecoverNotifcurrentA ceDiagHMTestRecoverNotif is sent when no error is detected for the first time on the same Health Monitoring test which previously triggered ceDiagHMThreshold…
1.3.6.1.4.1.9.9.350.0.4NotificationceDiagScheduledTestFailedNotifcurrentA ceDiagScheduledTestFailedNotif is sent if a scheduled test failed.
1.3.6.1.4.1.9.9.350.1NodeciscoEntityDiagMIBObjects
1.3.6.1.4.1.9.9.350.1.1NodeceDiagDescriptions
1.3.6.1.4.1.9.9.350.1.1.1TableceDiagTestInfoTablenot-accessiblecurrentThis table describes the tests supported by each physical entity supporting online diagnostics. The table organizes tests into sets associated with the physica…
1.3.6.1.4.1.9.9.350.1.1.1.1RowceDiagTestInfoEntrynot-accessiblecurrentThe description of a single test supported by a corresponding physical entity.
1.3.6.1.4.1.9.9.350.1.1.1.1.1ColumnceDiagTestIdnot-accessiblecurrentThis object indicates an arbitrary positive integer arbitrarily identifying the test.
1.3.6.1.4.1.9.9.350.1.1.1.1.2ColumnceDiagTestTextread-onlycurrentThis object indicates a human-readable description of the test. Examples include: 'Marching Pattern DRAM Test' 'Data Pins DRAM Test' 'Internal Loopback Test' '…
1.3.6.1.4.1.9.9.350.1.1.1.1.3ColumnceDiagTestAttributesread-onlycurrentThis object indicates a set of attributes characterizing the test: 'minimal' - indicates that this test will be executed during boot-up if ceDiagBootupLevel is…
1.3.6.1.4.1.9.9.350.1.1.2TableceDiagTestCustomAttributeTablenot-accessiblecurrentThis table describes the additional custom based attributes of the tests listed in ceDiagTestInfoTable. These are attributes which have been customized by the …
1.3.6.1.4.1.9.9.350.1.1.2.1RowceDiagTestCustomAttributeEntrynot-accessiblecurrentThe description of a single custom based attribute for a test supported by a corresponding physical entity.
1.3.6.1.4.1.9.9.350.1.1.2.1.1ColumnceDiagTestCustomAttributeIndexnot-accessiblecurrentAn arbitrary integer which identifies the custom based attribute of a test.
1.3.6.1.4.1.9.9.350.1.1.2.1.2ColumnceDiagTestCustomAttributeDescread-onlycurrentThis object provides a textual description of the custom based attribute of this test.
1.3.6.1.4.1.9.9.350.1.1.3TableceDiagErrorInfoTablenot-accessiblecurrentThis table describes the errors indicated by a system supporting online diagnostics.
1.3.6.1.4.1.9.9.350.1.1.3.1RowceDiagErrorInfoEntrynot-accessiblecurrentThe description of a single online error.
1.3.6.1.4.1.9.9.350.1.1.3.1.1ColumnceDiagErrorIdnot-accessiblecurrentThis object indicates an arbitrary positive integer arbitrarily identifying the error.
1.3.6.1.4.1.9.9.350.1.1.3.1.2ColumnceDiagErrorTextread-onlycurrentThis object indicates a human-readable description of the error. Examples include: 'DIAG_SUCCESS' 'DIAG_FAILURE' 'DIAG_NOT_SUPPORT' 'DIAG_SKIPPED'
1.3.6.1.4.1.9.9.350.1.2NodeceDiagGlobalConfig
1.3.6.1.4.1.9.9.350.1.2.1ScalarceDiagBootupLevelread-writecurrentThis object specifies the level that physical entities will execute their boot-up diagnostic.
1.3.6.1.4.1.9.9.350.1.3NodeceDiagEntity
1.3.6.1.4.1.9.9.350.1.3.1TableceDiagEntityTablenot-accessiblecurrentThis table supports online diagnostic control and status for each physical entity that supporting the feature. The SNMP entity adds a conceptual row to this ta…
1.3.6.1.4.1.9.9.350.1.3.1.1RowceDiagEntityEntrynot-accessiblecurrentOnline diagnostic control and status for a single physical entity supporting the feature. Observe that this data may not be accurate if the corresponding cefcM…
1.3.6.1.4.1.9.9.350.1.3.1.1.1ColumnceDiagEntityBootLevelread-onlycurrentThis object indicates the level that the physical entity executed its boot-up diagnostic.
1.3.6.1.4.1.9.9.350.1.3.1.1.2ColumnceDiagEntityImageAdminStatusread-writecurrentThis object specifies the desired image the physical entity should be running: 'operational' - the physical entity should be running the operational image. 'fi…
1.3.6.1.4.1.9.9.350.1.3.1.1.3ColumnceDiagEntityImageOperStatusread-onlycurrentThis object indicates the actual image the physical entity is running: 'operational' - the physical entity is running the operational image. 'fieldDiagnostic' …
1.3.6.1.4.1.9.9.350.1.3.1.1.4ColumnceDiagEntityFieldDiagnosticUrlread-writecurrentThis object specifies a URL (see RFC-1630) that specifies the location of the field diagnostic image. The following list provides some examples of URLs for the…
1.3.6.1.4.1.9.9.350.1.3.2TableceDiagEntityCurrentTestTablenot-accessiblecurrentThis table contains the information about the current test executing on a physical entity.
1.3.6.1.4.1.9.9.350.1.3.2.1RowceDiagEntityCurrentTestEntrynot-accessiblecurrentA test which is currently executing on a particular physical entity.
1.3.6.1.4.1.9.9.350.1.3.2.1.1ColumnceDiagEntityCurrentTestMethodread-onlycurrentThis object indicates the method used to invoke the diagnostic that is executing this test.
1.3.6.1.4.1.9.9.350.1.4NodeceDiagOnDemand
1.3.6.1.4.1.9.9.350.1.4.1ScalarceDiagOnDemandErrorAllowedread-writecurrentThis object specifies the number of errors the physical entities will allow before aborting an on demand diagnostic job. A value of '0' indicates that the an u…
1.3.6.1.4.1.9.9.350.1.4.2ScalarceDiagOnDemandErrorActionread-writecurrentThis object specifies how the physical entities in the system are to proceed when they encounter an error during an on demand diagnostic job. 'continue' - indi…
1.3.6.1.4.1.9.9.350.1.4.3ScalarceDiagOnDemandIterationsread-writecurrentThis object specifies the maximum number of iterations of an on demand job.
1.3.6.1.4.1.9.9.350.1.4.4TableceDiagOnDemandJobTablenot-accessiblecurrentThis table contains a list of on demand jobs currently in the system. A row in this table can be created by setting the corresponding instance of ceDiagOnDeman…
1.3.6.1.4.1.9.9.350.1.4.4.1RowceDiagOnDemandJobEntrynot-accessiblecurrentA on demand job currently executing on a particular physical entity which supports on demand diagnostics.
1.3.6.1.4.1.9.9.350.1.4.4.1.1ColumnceDiagOnDemandJobSuiteread-createcurrentThis object indicates the various system predefined test suites the on demand job can choose from. If the value of this object is 'none', this job will run the…
1.3.6.1.4.1.9.9.350.1.4.4.1.2ColumnceDiagOnDemandJobTestListread-createcurrentThis object specifies the user specified diagnostic suite (i.e., a set of tests) to be executed by the corresponding physical entity. The set of tests supporte…
1.3.6.1.4.1.9.9.350.1.4.4.1.3ColumnceDiagOnDemandJobPortListread-createcurrentThis object specifies the list of ports to be exercised by the corresponding physical entity when executing the diagnostic suite specified for the job.
1.3.6.1.4.1.9.9.350.1.4.4.1.4ColumnceDiagOnDemandJobRowStatusread-createcurrentThe status object used to manage the rows in this table. When set to active(1) the on demand job is submitted. When set to destroy(6) the on demand job is stop…
1.3.6.1.4.1.9.9.350.1.5NodeceDiagScheduled
1.3.6.1.4.1.9.9.350.1.5.1TableceDiagScheduledJobTablenot-accessiblecurrentThis table contains a list of scheduled jobs on the system. A row in this table can be created by setting the corresponding instance of ceDiagScheduledJobRowSt…
1.3.6.1.4.1.9.9.350.1.5.1.1RowceDiagScheduledJobEntrynot-accessiblecurrentA job currently scheduled on a particular physical entity.
1.3.6.1.4.1.9.9.350.1.5.1.1.1ColumnceDiagScheduledJobIndexnot-accessiblecurrentAn arbitrary non-zero integer value that uniquely identifies a single scheduled job with respect to a physical entity.
1.3.6.1.4.1.9.9.350.1.5.1.1.2ColumnceDiagScheduledJobTyperead-createcurrentThis object specifies the type of the scheduled job. 'scheduledOneShot' - the physical entity will invoke this job at the time specified by ceDiagScheduledJobS…
1.3.6.1.4.1.9.9.350.1.5.1.1.3ColumnceDiagScheduledJobStartread-createcurrentThis object specifies when a scheduled job will be executed. If the value of ceDiagScheduledJobType is 'scheduledOneShot', then this object only applies to the…
1.3.6.1.4.1.9.9.350.1.5.1.1.4ColumnceDiagScheduledJobDayOfWeekread-createcurrentThis object specifies the day of the week for a weekly periodic scheduled job. The value of of this object must be specified if the value of ceDiagScheduledJob…
1.3.6.1.4.1.9.9.350.1.5.1.1.5ColumnceDiagScheduledJobTestListread-createcurrentThis object specifies the diagnostic suite (i.e., a set of tests) to be executed by the corresponding physical entity. The set of tests supported by this physi…
1.3.6.1.4.1.9.9.350.1.5.1.1.6ColumnceDiagScheduledJobPortListread-createcurrentThis object specifies the list of ports to be tested by the corresponding physical entity when executing the diagnostic suite specified for the job.
1.3.6.1.4.1.9.9.350.1.5.1.1.7ColumnceDiagScheduledJobRowStatusread-createcurrentThe status object used to manage the rows in this table. When set to 'active' the scheduled job is submitted. When set to destroy(6) the scheduled job is clear…
1.3.6.1.4.1.9.9.350.1.5.1.1.8ColumnceDiagScheduledJobSuiteread-createcurrentThis object indicates the various system predefined test suites the on scheduled job can choose from. If the value of this object is 'none', this job will run …
1.3.6.1.4.1.9.9.350.1.6NodeceDiagTest
1.3.6.1.4.1.9.9.350.1.6.1TableceDiagTestPerfTablenot-accessiblecurrentThis table maintains data concerning the performance of tests executed by each physical entity supporting the online diagnostic feature. The table organizes te…
1.3.6.1.4.1.9.9.350.1.6.1.1RowceDiagTestPerfEntrynot-accessiblecurrentData concerning the performance of a single test.
1.3.6.1.4.1.9.9.350.1.6.1.1.1ColumnceDiagTestPerfLastResultread-onlycurrentThis object indicates the result the last time this test was executed by the corresponding physical entity: 'unknown' - the corresponding physical entity has n…
1.3.6.1.4.1.9.9.350.1.6.1.1.2ColumnceDiagTestPerfLastErrorIDread-onlycurrentThis object indicates the last error code of this test. Details of the non-zero error code can be found in the corresponding entry in ceDiagErrorInfoTable.
1.3.6.1.4.1.9.9.350.1.6.1.1.3ColumnceDiagTestPerfLastRunread-onlycurrentThis object indicates the last time the corresponding physical entity executed this test. If the value of ceDiagTestPerfLastResult is 'unknown', then the value…
1.3.6.1.4.1.9.9.350.1.6.1.1.4ColumnceDiagTestPerfFirstFailread-onlycurrentThis object indicates the first time the corresponding physical entity executed this test and it failed. The value of this object is irrelevant if the value of…
1.3.6.1.4.1.9.9.350.1.6.1.1.5ColumnceDiagTestPerfLastSuccessread-onlycurrentThis object indicates the last time the corresponding physical entity executed this test and it passed. The value 0x0000010100000000 indicates that the corresp…
1.3.6.1.4.1.9.9.350.1.6.1.1.6ColumnceDiagTestPeffLastFailread-onlycurrentThis object indicates the last time the corresponding physical entity executed this test and it failed. If the value of ceDiagTestPerfTotalFails is 0, then the…
1.3.6.1.4.1.9.9.350.1.6.1.1.7ColumnceDiagTestPerfTotalRunsread-onlycurrentThis object indicates the total number of times the corresponding physical entity has executed the test.
1.3.6.1.4.1.9.9.350.1.6.1.1.8ColumnceDiagTestPerfTotalFailsread-onlycurrentThis object indicates the total number of times the corresponding physical entity has executed the test and the test resulted with a failure.
1.3.6.1.4.1.9.9.350.1.6.1.1.9ColumnceDiagTestPerfConsecutiveFailsread-onlycurrentThis object indicates the consecutive number of times the corresponding physical entity has executed the test and it has failed. The value of this object will …
1.3.6.1.4.1.9.9.350.1.6.1.1.10ColumnceDiagTestPerfLastTestMethodread-onlycurrentThis object indicates the testing method used for the last time this test was executed by the corresponding physical entity.
1.3.6.1.4.1.9.9.350.1.7NodeceDiagHealthMonitor
1.3.6.1.4.1.9.9.350.1.7.1ScalarceDiagHMSyslogEnabledread-writecurrentThis object specifies whether the system will generate syslog messages due to the tests run by health monitor.
1.3.6.1.4.1.9.9.350.1.7.2TableceDiagHMTestTablenot-accessiblecurrentThis table describes attributes specific to the health monitor for tests supported by a physical entity.
1.3.6.1.4.1.9.9.350.1.7.2.1RowceDiagHMTestEntrynot-accessiblecurrentThe attributes of a single test specific to the health monitor.
1.3.6.1.4.1.9.9.350.1.7.2.1.1ColumnceDiagHMTestEnabledread-writecurrentThis object specifies whether this test is enabled for health monitor.
1.3.6.1.4.1.9.9.350.1.7.2.1.2ColumnceDiagHMTestIntervalMinread-onlycurrentThis object indicates the minimum interval which the health monitor can periodically invoke this test.
1.3.6.1.4.1.9.9.350.1.7.2.1.3ColumnceDiagHMTestIntervalDefaultread-onlycurrentThis object indicates the default interval which the health monitor will periodically invoke this test. A value of '0' indicates that the health monitor will n…
1.3.6.1.4.1.9.9.350.1.7.2.1.4ColumnceDiagHMTestIntervalread-writecurrentThis object specifies the interval at which the health monitor periodically invokes this test. A value of '0' indicates that the health monitor will not invoke…
1.3.6.1.4.1.9.9.350.1.7.2.1.5ColumnceDiagHMTestThresholdDefaultread-onlycurrentThis object indicates the default consecutive failure count threshold. When the specified failure count threshold is reached, the diagnostic test result is set…
1.3.6.1.4.1.9.9.350.1.7.2.1.6ColumnceDiagHMTestThresholdread-writecurrentThis object specifies the consecutive failure count threshold for this test. When the specified failure count threshold is reached, the diagnostic test result …
1.3.6.1.4.1.9.9.350.1.7.2.1.7ColumnceDiagHMTestThreshWindowSuiteread-writecurrentThis object specifies a sliding history window parameter which is used in combination with ceDiagHMTestThreshold. When the specified failure count threshold is…
1.3.6.1.4.1.9.9.350.1.7.2.1.8ColumnceDiagHMTestThreshWindowSizeread-writecurrentThis object indicates the sliding history window size. When the value of ceDiagHMTestThreshWindowSuite is 'default', the user cannot set any value for this obj…
1.3.6.1.4.1.9.9.350.1.8NodeceDiagEvents
1.3.6.1.4.1.9.9.350.1.8.1ScalarceDiagEventLogSizeread-writecurrentThis object specifies the maximum number of entries which the event log buffer can contain.
1.3.6.1.4.1.9.9.350.1.8.2ScalarceDiagEventCountread-onlycurrentThis object specifies the number of entries currently stored in the event log buffer.
1.3.6.1.4.1.9.9.350.1.8.3ScalarceDiagEventMaxQueriesread-onlycurrentMaximum number of query entries allowed in the ceDiagEventQueryTable.
1.3.6.1.4.1.9.9.350.1.8.4TableceDiagEventQueryTablenot-accessiblecurrentA control table used to query the event log buffer. Each row instance in the table represents a query with its parameters. The resulting data for each instance…
1.3.6.1.4.1.9.9.350.1.8.4.1RowceDiagEventQueryEntrynot-accessiblecurrentA conceptual row of the ceDiagEventQueryTable used to setup a event log buffer query to search for diagnostic events. The actual search is started by when the …
1.3.6.1.4.1.9.9.350.1.8.4.1.1ColumnceDiagEventQueryIndexnot-accessiblecurrentAn arbitrary integer in the range of 1 to ceDiagEventMaxQueries to identify this control query.
1.3.6.1.4.1.9.9.350.1.8.4.1.2ColumnceDiagEventQueryPhysicalIndexread-createcurrentThis object specifies the physical entity for the event log buffer query. A value of zero indicates that the query will return events of all physical entities.
1.3.6.1.4.1.9.9.350.1.8.4.1.3ColumnceDiagEventQuerySeverityread-createcurrentThis object specifies the severity of the event log buffer query. A value of 'all' indicates that the search will return events of all severities.
1.3.6.1.4.1.9.9.350.1.8.4.1.4ColumnceDiagEventQueryOwnerread-createcurrentThe manager entity that configured this entry and is therefore using the resources assigned to it. It is used to model an administratively assigned name of the…
1.3.6.1.4.1.9.9.350.1.8.4.1.5ColumnceDiagEventQueryResultingRowsread-onlycurrentThe result status of the query. Possible values are: -1 - Either the query has not been initiated or the agent is busy processing this query instance. Time to …
1.3.6.1.4.1.9.9.350.1.8.4.1.6ColumnceDiagEventQueryStatusread-createcurrentThe status object used to manage rows in this table. When set to 'active', the query to search for diagnostic events is initiated. Once a row becomes active, v…
1.3.6.1.4.1.9.9.350.1.8.5TableceDiagEventResultTablenot-accessiblecurrentA table containing event log information corresponding to all the completed queries set up in ceDiagEventQueryTable. The query result will not become available…
1.3.6.1.4.1.9.9.350.1.8.5.1RowceDiagEventResultEntrynot-accessiblecurrentA conceptual row in ceDiagEventResultTable, containing information about an event that matches the search criteria set in the corresponding row of ceDiagEventQ…
1.3.6.1.4.1.9.9.350.1.8.5.1.1ColumnceDiagEventResultIndexnot-accessiblecurrentA positive integer which uniquely identifies a result entry matching a particular query.
1.3.6.1.4.1.9.9.350.1.8.5.1.2ColumnceDiagEventResultPhysicalIndexread-onlycurrentThis object specifies the physical entity corresponding to this event.
1.3.6.1.4.1.9.9.350.1.8.5.1.3ColumnceDiagEventResultPhysicalDescrread-onlycurrentThis object specifies a textual description of physical entity corresponding to this event.
1.3.6.1.4.1.9.9.350.1.8.5.1.4ColumnceDiagEventResultTimeread-onlycurrentThis object specifies the time at which this event occurred.
1.3.6.1.4.1.9.9.350.1.8.5.1.5ColumnceDiagEventResultSeverityread-onlycurrentThis object indicates the severity of this event.
1.3.6.1.4.1.9.9.350.1.8.5.1.6ColumnceDiagEventResultLogTextread-onlycurrentThe text message of this event.
1.3.6.1.4.1.9.9.350.1.8.6ScalarceDiagEventErrorMsgaccessible-for-notifycurrentThe error message related to the notification.
1.3.6.1.4.1.9.9.350.1.9NodeceDiagNotificationControl
1.3.6.1.4.1.9.9.350.1.9.1ScalarceDiagEnableBootUpFailedNotifread-writecurrentThis variable specifies whether the system produces the ceDiagBootUpFailedNotif. A 'false' value will prevent ceDiagBootUpFailedNotif notifications from being …
1.3.6.1.4.1.9.9.350.1.9.2ScalarceDiagEnableHMThreshReachedNotifread-writecurrentThis variable specifies whether the system produces the ceDiagHMThresholdReachedNotif. A 'false' value will prevent ceDiagHMThresholdReachedNotif notifications…
1.3.6.1.4.1.9.9.350.1.9.3ScalarceDiagEnableHMTestRecoverNotifread-writecurrentThis variable specifies whether the system produces the ceDiagHMTestRecoverNotif. A 'false' value will prevent ceDiagHMTestRecoverNotif notifications from bein…
1.3.6.1.4.1.9.9.350.1.9.4ScalarceDiagEnableSchedTestFailedNotifread-writecurrentThis variable specifies whether the system produces the ceDiagScheduledTestFailedNotif. A 'false' value will prevent ceDiagScheduledTestFailedNotif notificatio…
1.3.6.1.4.1.9.9.350.2NodeciscoEntityDiagMIBConform
1.3.6.1.4.1.9.9.350.2.1NodeciscoEntityDiagMIBCompliances
1.3.6.1.4.1.9.9.350.2.1.1ComplianceciscoEntityDiagMIBComplianceRev1deprecatedThe compliance statement for SNMP entities that implement the CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is strongly recommended for any platform…
1.3.6.1.4.1.9.9.350.2.1.2ComplianceciscoEntityDiagMIBComplianceRev2deprecatedThe compliance statement for SNMP entities that implement the CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is strongly recommended for any platform…
1.3.6.1.4.1.9.9.350.2.1.3ComplianceciscoEntityDiagMIBComplianceRev3deprecatedThe compliance statement for SNMP entities that implement the CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is strongly recommended for any platform…
1.3.6.1.4.1.9.9.350.2.1.4ComplianceciscoEntityDiagMIBComplianceRev4read-onlycurrentThe compliance statement for SNMP entities that implement the CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is strongly recommended for any platform…
1.3.6.1.4.1.9.9.350.2.2NodeciscoEntityDiagMIBGroups
1.3.6.1.4.1.9.9.350.2.2.1GroupceDiagDescrGroupcurrentA collection of managed objects that describe tests and errors supported by each physical entity.
1.3.6.1.4.1.9.9.350.2.2.2GroupceDiagGlobalConfigGroupcurrentA collection of managed objects that describe global configuration of the online diagnostic feature.
1.3.6.1.4.1.9.9.350.2.2.3GroupceDiagEntityGroupcurrentA collection of managed objects that describe the state of a physical entity with respect ot the online diagnostic feature.
1.3.6.1.4.1.9.9.350.2.2.4GroupceDiagEntityImageGroupcurrentA collection of managed objects that describe the diagnostic image which the physical entity is running.
1.3.6.1.4.1.9.9.350.2.2.5GroupceDiagOnDemandGroupcurrentA collection of managed objects that describe the diagnostic on demand diagnostic jobs on the system.
1.3.6.1.4.1.9.9.350.2.2.6GroupceDiagScheduledGroupcurrentA collection of managed objects that describe the diagnostic on demand diagnostic jobs on the system.
1.3.6.1.4.1.9.9.350.2.2.7GroupceDiagTestPerfGroupcurrentA collection of managed objects that describe the performance of tests supported by each physical entity.
1.3.6.1.4.1.9.9.350.2.2.8GroupceDiagHealthMonitorGroupcurrentA collection of managed objects that describe tests and test configuration with relating to the health monitor.
1.3.6.1.4.1.9.9.350.2.2.9GroupceDiagEventGroupcurrentA collection of managed objects that describe online diagnostic event history.
1.3.6.1.4.1.9.9.350.2.2.10GroupceDiagScheduledJobSuiteGroupcurrentA collection of managed objects that describe the test suite information for a diagnostic scheduled job.
1.3.6.1.4.1.9.9.350.2.2.11GroupceDiagNotifControlGroupcurrentA collection of objects providing enabling/disabling of the boot up failed, health monitoring, and scheduled job notifications for online diagnostics.
1.3.6.1.4.1.9.9.350.2.2.12GroupceDiagNotifErrorMsgGroupcurrentA collection of objects providing error message used by various notifications.
1.3.6.1.4.1.9.9.350.2.2.13GroupceDiagNotificationGroupcurrentA collection of notifications providing for boot up failed, health monitoring, and scheduled job within online diagnostics.
1.3.6.1.4.1.9.9.350.2.2.14GroupceDiagTestPerfLastTestMethodGroupcurrentA collection of managed objects that describe the last testing method for a diagnostic test.
1.3.6.1.4.1.9.9.350.2.2.15GroupceDiagHMTestThreshWindowGroupcurrentA collection of managed objects that describe the sliding history window parameters for a Health Monitor diagnostic test.
MIB Viewer