MIB Viewer

CISCO-ENTITY-EXT-MIB

73 objects
This MIB is an extension of the ENTITY-MIB specified in RFC2737. This MIB module contains Cisco-defined extensions to the entityPhysicalTable to represent information related to entities of class module(entPhysicalClass = 'module') which have a Processor. A processor module is defined as a physical entity that has a CPU, RAM and NVRAM so that it can independently - load a bootable image - save configuration. This module is the entry point for external applications like SNMP Manager, CLI, FTP etc. Line card is an interface card with at least a Processor and RAM. This might be referred to as Service Module in some cisco products. A configuration register is a 16 bit software register. The configuration register is mainly used to check for instructions on where to find the Cisco Operating System software. Some other functions of configuration register are: - To select a boot source and default boot filename. - To enable or disable the Break function. - To control broadcast addresses. - To set the console terminal baud rate. - To load operating software from Flash memory. - To allow us to manually boot the system using the boot command at the bootstrap program prompt. Booting is the process of initializing the hardware and starting the Operating System.
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.9.195IdentityciscoEntityExtMIBThis MIB is an extension of the ENTITY-MIB specified in RFC2737. This MIB module contains Cisco-defined extensions to the entityPhysicalTable to represent info…
1.3.6.1.4.1.9.9.195.1NodeciscoEntityExtMIBObjects
1.3.6.1.4.1.9.9.195.1.1TableceExtPhysicalProcessorTablenot-accessiblecurrentThe ceExtPhysicalProcessorTable extends the ENTITY-MIB entPhysicalTable for modules (Non FRUs(Field Replacable Units) or FRUs).
1.3.6.1.4.1.9.9.195.1.1.1RowceExtPhysicalProcessorEntrynot-accessiblecurrentA ceExtPhysicalProcessorTable entry extends a corresponding entPhysicalTable entry of class module(entPhysicalClass = 'module'). A processor module or line car…
1.3.6.1.4.1.9.9.195.1.1.1.1ColumnceExtProcessorRamread-onlycurrentTotal number of bytes of RAM available on the Processor.
1.3.6.1.4.1.9.9.195.1.1.1.2ColumnceExtNVRAMSizeread-onlycurrentTotal number of bytes of NVRAM in the entity. A value of 0 for this object means the entity does not support NVRAM or NVRAM information is not available.
1.3.6.1.4.1.9.9.195.1.1.1.3ColumnceExtNVRAMUsedread-onlycurrentNumber of bytes of NVRAM in use. This object is irrelevant if ceExtNVRAMSize is 0.
1.3.6.1.4.1.9.9.195.1.1.1.4ColumnceExtProcessorRamOverflowread-onlycurrentThis object represents the upper 32-bit of ceExtProcessorRam. This object needs to be supported only if the available RAM bytes exceeds 32-bit, otherwise this …
1.3.6.1.4.1.9.9.195.1.1.1.5ColumnceExtHCProcessorRamread-onlycurrentThis object represents the total number of bytes of RAM available on the Processor. This object is a 64-bit version of ceExtProcessorRam.
1.3.6.1.4.1.9.9.195.1.1.1.6ColumnceExtNVRAMSizeOverflowread-onlycurrentThis object represents the upper 32-bit of ceExtNVRAMSize. This object needs to be supported only if the available NVRAM bytes exceeds 32-bit, otherwise this o…
1.3.6.1.4.1.9.9.195.1.1.1.7ColumnceExtHCNVRAMSizeread-onlycurrentThis object represents the total number of bytes of NVRAM available on the Processor. This object is a 64-bit version of ceExtNVRAMSize.
1.3.6.1.4.1.9.9.195.1.1.1.8ColumnceExtNVRAMUsedOverflowread-onlycurrentThis object represents the upper 32-bit of ceExtNVRAMUsed. This object needs to be supported only if the used NVRAM bytes exceeds 32-bit, otherwise this object…
1.3.6.1.4.1.9.9.195.1.1.1.9ColumnceExtHCNVRAMUsedread-onlycurrentThis object represents the number of bytes of NVRAM used on the Processor. This object is a 64-bit version of ceExtHCNVRAMUsed.
1.3.6.1.4.1.9.9.195.1.2TableceExtConfigRegTablenot-accessiblecurrentThe ceExtConfigRegTable extends the ENTITY-MIB entPhysicalTable.
1.3.6.1.4.1.9.9.195.1.2.1RowceExtConfigRegEntrynot-accessiblecurrentA ceExtConfigRegTable entry extends a corresponding entPhysicalTable entry of class module which has a configuration register. Entries are created by the agent…
1.3.6.1.4.1.9.9.195.1.2.1.1ColumnceExtConfigRegisterread-onlycurrentThe value of configuration register with which the processor module booted.
1.3.6.1.4.1.9.9.195.1.2.1.2ColumnceExtConfigRegNextread-writecurrentThe value of configuration register in the processor module at next reboot. Just after the reboot this has the same value as ceExtConfigRegister.
1.3.6.1.4.1.9.9.195.1.2.1.3ColumnceExtSysBootImageListread-writecurrentThe list of system boot images which can be used for booting.
1.3.6.1.4.1.9.9.195.1.2.1.4ColumnceExtKickstartImageListread-writecurrentThe list of system kickstart images which can be used for booting.
1.3.6.1.4.1.9.9.195.1.3TableceExtEntityLEDTablenot-accessiblecurrentA table containing information of LED on an entity.
1.3.6.1.4.1.9.9.195.1.3.1RowceExtEntityLEDEntrynot-accessiblecurrentAn entry (conceptual row) in the ceExtEntityLEDTable, containing information about an LED on an entity, identified by entPhysicalIndex.
1.3.6.1.4.1.9.9.195.1.3.1.1ColumnceExtEntityLEDTypenot-accessiblecurrentThe type of LED on this entity. 'status' - indicates the entity status. 'system' - indicates the overall system status. 'active' - the redundancy status of a m…
1.3.6.1.4.1.9.9.195.1.3.1.2ColumnceExtEntityLEDColorread-onlycurrentThe color of the LED.
1.3.6.1.4.1.9.9.195.1.4TableceExtEntPhysicalTablenot-accessiblecurrentThis table contains additional information about a particular physical entity. This table augments the 'entPhysicalTable' of the ENTITY-MIB.
1.3.6.1.4.1.9.9.195.1.4.1RowceExtEntPhysicalEntrynot-accessiblecurrentAn entry (conceptual row) in the 'ceExtEntPhysicalTable', containing additional information about a physical entity, identified by 'entPhysicalIndex'.
1.3.6.1.4.1.9.9.195.1.4.1.1ColumnceEntPhysicalSecondSerialNumread-writecurrentThis object represents the vendor-specific second serial number string for the physical entity. The first serial number string of the physical entity is repres…
1.3.6.1.4.1.9.9.195.1.5NodeceExtNotificationControlObjects
1.3.6.1.4.1.9.9.195.1.5.1ScalarceExtEntDoorNotifEnableread-writecurrentThis object controls the generation of ceExtEntDoorCloseNotif and ceExtEntDoorOpenNotif notifications as follows: 'true(1)' - the generation of ceExtEntDoorClo…
1.3.6.1.4.1.9.9.195.1.5.2ScalarceExtEntBreakOutPortNotifEnableread-onlycurrentThis object controls the generation of ceExtBreakOutPortInserted and ceExtBreakOutPortRemoved as follows: 'true(1)' - the generation of ceExtBreakOutPortInsert…
1.3.6.1.4.1.9.9.195.1.5.3ScalarceExtEntUsbModemNotifEnableread-writecurrentThis object controls the generation of ceExtUSBModemPlugInNotif and ceExtUSBModemPlugOutNotif as follows: 'true(1)' - the generation of ceExtUSBModemPlugInNoti…
1.3.6.1.4.1.9.9.195.1.6TableceExtUSBModemTablenot-accessiblecurrentA table containing information of USB MODEMs on an entity.
1.3.6.1.4.1.9.9.195.1.6.1RowceExtUSBModemEntrynot-accessiblecurrentAn entry (conceptual row) in the ceExtUSBModemTable, containing information about an USB MODEM on an entity, identified by entPhysicalIndex.
1.3.6.1.4.1.9.9.195.1.6.1.1ColumnceExtUSBModemIMEIread-onlycurrentThe International Mobile Equipment Identifier (IMEI) of the USB-MODEM
1.3.6.1.4.1.9.9.195.1.6.1.2ColumnceExtUSBModemIMSIread-onlycurrentThe International Mobile Subscriber Identifier(IMSI) - for a GSM USB MODEM.
1.3.6.1.4.1.9.9.195.1.6.1.3ColumnceExtUSBModemServiceProviderread-onlycurrentThe Service Provider name for a USB MODEM.
1.3.6.1.4.1.9.9.195.1.6.1.4ColumnceExtUSBModemSignalStrengthread-onlycurrentThe signal strength of the USB MODEM.
1.3.6.1.4.1.9.9.195.2NodeceExtMIBNotificationPrefix
1.3.6.1.4.1.9.9.195.2.0NodeciscoEntityExtMIBNotifications
1.3.6.1.4.1.9.9.195.2.0.1NotificationceExtEntDoorCloseNotifcurrentA ceExtEntDoorCloseNotif is generated if the door of an entity has been closed.
1.3.6.1.4.1.9.9.195.2.0.2NotificationceExtEntDoorOpenNotifcurrentA ceExtEntDoorOpenNotif is generated if the door of an entity has been opened.
1.3.6.1.4.1.9.9.195.2.0.3NotificationceExtBreakOutPortInsertedcurrentThe ceExtBreakOutPortInserted notification indicates that a Breakout port was inserted. The varbind for this notification indicates the entPhysicalIndex of the…
1.3.6.1.4.1.9.9.195.2.0.4NotificationceExtBreakOutPortRemovedcurrentThe ceExtBreakOutPortRemoved notification indicates that a Breakout Port was removed. The varbind for this notification indicates the entPhysicalIndex of the r…
1.3.6.1.4.1.9.9.195.2.0.5NotificationceExtUSBModemPlugInNotifcurrentThe ceExtUSBModemPlugInNotif notification indicates that a USB MODEM was inserted. The varbind for this notification indicates the entPhysicalDescr of the inse…
1.3.6.1.4.1.9.9.195.2.0.6NotificationceExtUSBModemPlugOutNotifcurrentThe ceExtUSBModemPlugOutNotif notification indicates that a USB MODEM was removed. The varbind for this notification indicates the entPhysicalDescr of the remo…
1.3.6.1.4.1.9.9.195.3NodeciscoEntityExtMIBConformance
1.3.6.1.4.1.9.9.195.3.1NodeciscoEntityExtMIBCompliances
1.3.6.1.4.1.9.9.195.3.1.1ComplianceciscoEntityExtMIBCompliancedeprecatedCompliance for SNMP Entities which support modules with CPU, NVRAM and configuration register.
1.3.6.1.4.1.9.9.195.3.1.2ComplianceciscoEntityExtMIBComplianceRev1deprecatedCompliance for SNMP Entities which support modules with CPU, NVRAM and configuration register.
1.3.6.1.4.1.9.9.195.3.1.3ComplianceciscoEntityExtMIBComplianceRev2deprecatedCompliance for SNMP Entities which support modules with CPU, NVRAM and configuration register.
1.3.6.1.4.1.9.9.195.3.1.4ComplianceciscoEntityExtMIBComplianceRev3deprecatedCompliance for SNMP Entities which support modules with CPU, NVRAM and configuration register.
1.3.6.1.4.1.9.9.195.3.1.5ComplianceciscoEntityExtMIBComplianceRev4read-onlydeprecatedCompliance for SNMP Entities which support modules with CPU, NVRAM and configuration register.
1.3.6.1.4.1.9.9.195.3.1.6ComplianceciscoEntityExtMIBComplianceRev5read-onlydeprecatedCompliance for SNMP Entities which support modules with CPU, NVRAM and configuration register.
1.3.6.1.4.1.9.9.195.3.1.7ComplianceciscoEntityExtMIBComplianceRev6read-onlycurrentCompliance for SNMP Entities which support modules with CPU, NVRAM and configuration register.
1.3.6.1.4.1.9.9.195.3.2NodeciscoEntityExtMIBGroups
1.3.6.1.4.1.9.9.195.3.2.1GroupceExtPhysicalProcessorGroupcurrentThe collection of objects which give information about the Processor RAM and NVRAM.
1.3.6.1.4.1.9.9.195.3.2.2GroupciscoEntityExtConfigRegGroupcurrentThe collection of objects which give information about configuration register. Implementation of this group is optional.
1.3.6.1.4.1.9.9.195.3.2.3GroupceExtSysBootImageListGroupcurrentA group containing an object providing information about the system boot images. Implementation of this group is optional.
1.3.6.1.4.1.9.9.195.3.2.4GroupciscoEntityExtLEDGroupcurrentA collection of objects for giving led information.
1.3.6.1.4.1.9.9.195.3.2.5GroupceExtSysBootImageListGroupRev1currentA group containing an object providing information about the system boot images. Implementation of this group is optional.
1.3.6.1.4.1.9.9.195.3.2.6GroupciscoExtEntityPhysicalGroupcurrentThe collection of objects for providing additional information about the physical entity. Implementation of this group is optional.
1.3.6.1.4.1.9.9.195.3.2.7GroupceExtPhyProcessorOverflowGroupcurrentThe collection of Overflow (upper 32-bit) objects which provides information about physical processor, when the entity runs on 64-bit Operating System (OS). Th…
1.3.6.1.4.1.9.9.195.3.2.8GroupceExtPhyProcessorHCGroupcurrentThe collection of High Capacity (HC) objects which provides information about physical processor, when the entity runs on 64-bit Operating System (OS). This gr…
1.3.6.1.4.1.9.9.195.3.2.9GroupceExtEntDoorNotifGroupcurrentA collection of objects providing the notification information for door entitites.
1.3.6.1.4.1.9.9.195.3.2.10GroupceExtEntDoorNotifControlGroupcurrentA collection of objects providing control for entity door notifications.
1.3.6.1.4.1.9.9.195.3.2.11GroupceExtBreakOutPortNotifGroupcurrentA collection of objects providing the notification information for supporting Breakout port feature.
1.3.6.1.4.1.9.9.195.3.2.12GroupceExtBreakOutPortNotifControlGroupcurrentA collection of objects providing control for Breakout Port notifications.
1.3.6.1.4.1.9.9.195.3.2.13GroupceExtUSBModemGroupcurrentA collection of objects for giving USB MODEM config information.
1.3.6.1.4.1.9.9.195.3.2.14GroupceExtUsbModemNotificationsGroupcurrentA collection of notifications for USB MODEM removal and insertion.
1.3.6.1.4.1.9.9.195.3.2.15GroupceExtUsbModemNotifControlGroupcurrentA collection of objects providing control for USB MODEM notifications.
1.3.6.1.4.1.9.9.195.3.2.16GroupceExtNVRAMOverflowGroupcurrentThe collection of objects providing Overflow (upper 32-bit) objects for processor NVRAM information.
1.3.6.1.4.1.9.9.195.3.2.17GroupceExtHCNVRAMGroupcurrentThe collection of objects providing High Capacity (HC) objects for processor NVRAM information.
Type Definitions
NameSyntaxStatusDescription
BootImageListOCTET STRING (SIZE (0..255))currentThis contains a list of boot images, each separated by the ';' (semi-colon) character. The following provides a syntax for parsing a single boot image list item. <device>:[filename] | <URL> <device> can be (but not limi…
ConfigRegisterValueOCTET STRING (SIZE (2))currentAn Integer containing the value of config register. The definition of individual bits from right to left when set are as follows: 00 to 03 Boot Fields(Refer below for explanation). 04 to 05 Not Used. 06 Causes system so…