CISCO-ENTITY-FRU-CONTROL-MIB
171 objects
The CISCO-ENTITY-FRU-CONTROL-MIB is used to monitor and configure operational status of Field Replaceable Units (FRUs) and other managable physical entities of the system listed in the Entity-MIB (RFC 2737) entPhysicalTable. FRUs include assemblies such as power supplies, fans, processor modules, interface modules, etc.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| ENTITY-MIB | entPhysicalClass entPhysicalContainedIn entPhysicalIndex entPhysicalModelName entPhysicalName entPhysicalVendorType |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.117 | IdentityciscoEntityFRUControlMIB | of | The CISCO-ENTITY-FRU-CONTROL-MIB is used to monitor and configure operational status of Field Replaceable Units (FRUs) and other managable physical entities of… | |
| 1.3.6.1.4.1.9.9.117.1 | NodecefcMIBObjects | |||
| 1.3.6.1.4.1.9.9.117.1.1 | NodecefcFRUPower | |||
| 1.3.6.1.4.1.9.9.117.1.1.1 | TablecefcFRUPowerSupplyGroupTable | not-accessible | current | This table lists the redundancy mode and the operational status of the power supply groups in the system. |
| 1.3.6.1.4.1.9.9.117.1.1.1.1 | RowcefcFRUPowerSupplyGroupEntry | not-accessible | current | An cefcFRUPowerSupplyGroupTable entry lists the desired redundancy mode, the units of the power outputs and the available and drawn current for the power suppl… |
| 1.3.6.1.4.1.9.9.117.1.1.1.1.1 | ColumncefcPowerRedundancyMode | read-write | current | The administratively desired power supply redundancy mode. |
| 1.3.6.1.4.1.9.9.117.1.1.1.1.2 | ColumncefcPowerUnits | read-only | current | The units of primary supply to interpret cefcTotalAvailableCurrent and cefcTotalDrawnCurrent as power. For example, one 1000-watt power supply could deliver 10… |
| 1.3.6.1.4.1.9.9.117.1.1.1.1.3 | ColumncefcTotalAvailableCurrent | read-only | current | Total current available for FRU usage. |
| 1.3.6.1.4.1.9.9.117.1.1.1.1.4 | ColumncefcTotalDrawnCurrent | read-only | current | Total current drawn by powered-on FRUs. |
| 1.3.6.1.4.1.9.9.117.1.1.1.1.5 | ColumncefcPowerRedundancyOperMode | read-only | current | The power supply redundancy operational mode. |
| 1.3.6.1.4.1.9.9.117.1.1.1.1.6 | ColumncefcPowerNonRedundantReason | read-only | current | This object has the value of notApplicable(1) when cefcPowerRedundancyOperMode of the instance does not have the value of nonRedundant(4). The other values exp… |
| 1.3.6.1.4.1.9.9.117.1.1.1.1.7 | ColumncefcTotalDrawnInlineCurrent | read-only | current | Total inline current drawn for inline operation. |
| 1.3.6.1.4.1.9.9.117.1.1.2 | TablecefcFRUPowerStatusTable | not-accessible | current | This table lists the power-related administrative status and operational status of the manageable components in the system. |
| 1.3.6.1.4.1.9.9.117.1.1.2.1 | RowcefcFRUPowerStatusEntry | not-accessible | current | An cefcFRUPowerStatusTable entry lists the desired administrative status, the operational status of the power manageable component, and the current required by… |
| 1.3.6.1.4.1.9.9.117.1.1.2.1.1 | ColumncefcFRUPowerAdminStatus | read-write | current | Administratively desired FRU power state. |
| 1.3.6.1.4.1.9.9.117.1.1.2.1.2 | ColumncefcFRUPowerOperStatus | read-only | current | Operational FRU power state. |
| 1.3.6.1.4.1.9.9.117.1.1.2.1.3 | ColumncefcFRUCurrent | read-only | current | Current supplied by the FRU (positive values) or current required to operate the FRU (negative values). |
| 1.3.6.1.4.1.9.9.117.1.1.2.1.4 | ColumncefcFRUPowerCapability | read-only | current | This object indicates the set of supported power capabilities of the FRU. realTimeCurrent(0) - cefcFRURealTimeCurrent is supported by the FRU. |
| 1.3.6.1.4.1.9.9.117.1.1.2.1.5 | ColumncefcFRURealTimeCurrent | read-only | current | This object indicates the realtime value of current supplied by the FRU (positive values) or the realtime value of current drawn by the FRU (negative values). |
| 1.3.6.1.4.1.9.9.117.1.1.3 | ScalarcefcMaxDefaultInLinePower | read-write | deprecated | The system will provide power to the device connecting to the FRU if the device needs power, like an IP Phone. We call the providing power inline power. This M… |
| 1.3.6.1.4.1.9.9.117.1.1.4 | TablecefcFRUPowerSupplyValueTable | not-accessible | current | This table lists the power capacity of a power FRU in the system if it provides variable power. Power supplies usually provide either system or inline power. T… |
| 1.3.6.1.4.1.9.9.117.1.1.4.1 | RowcefcFRUPowerSupplyValueEntry | not-accessible | current | An cefcFRUPowerSupplyValueTable entry lists the current provided by the FRU for operation. Entries are created by the agent at system power-up or FRU insertion… |
| 1.3.6.1.4.1.9.9.117.1.1.4.1.1 | ColumncefcFRUTotalSystemCurrent | read-write | current | Total current that could be supplied by the FRU (positive values) for system operations. |
| 1.3.6.1.4.1.9.9.117.1.1.4.1.2 | ColumncefcFRUDrawnSystemCurrent | read-write | current | Amount of current drawn by the FRU's in the system towards system operations from this FRU |
| 1.3.6.1.4.1.9.9.117.1.1.4.1.3 | ColumncefcFRUTotalInlineCurrent | read-write | current | Total current supplied by the FRU (positive values) for inline operations. |
| 1.3.6.1.4.1.9.9.117.1.1.4.1.4 | ColumncefcFRUDrawnInlineCurrent | read-write | current | Amount of current that is being drawn from this FRU for inline operation. |
| 1.3.6.1.4.1.9.9.117.1.1.4.1.5 | ColumncefcFRUActualInputCurrent | read-only | current | Amount of actual input current of this power supply. |
| 1.3.6.1.4.1.9.9.117.1.1.4.1.6 | ColumncefcFRUActualOutputCurrent | read-only | current | Amount of actual output current of this power supply. |
| 1.3.6.1.4.1.9.9.117.1.1.5 | ScalarcefcMaxDefaultHighInLinePower | read-write | current | The system will provide power to the device connecting to the FRU if the device needs power, like an IP Phone. We call the providing power inline power. This M… |
| 1.3.6.1.4.1.9.9.117.1.2 | NodecefcModule | |||
| 1.3.6.1.4.1.9.9.117.1.2.1 | TablecefcModuleTable | not-accessible | current | A cefcModuleTable entry lists the operational and administrative status information for ENTITY-MIB entPhysicalTable entries for manageable components of type P… |
| 1.3.6.1.4.1.9.9.117.1.2.1.1 | RowcefcModuleEntry | not-accessible | current | A cefcModuleStatusTable entry lists the operational and administrative status information for ENTITY-MIB entPhysicalTable entries for manageable components of … |
| 1.3.6.1.4.1.9.9.117.1.2.1.1.1 | ColumncefcModuleAdminStatus | read-write | current | This object provides administrative control of the module. |
| 1.3.6.1.4.1.9.9.117.1.2.1.1.2 | ColumncefcModuleOperStatus | read-only | current | This object shows the module's operational state. |
| 1.3.6.1.4.1.9.9.117.1.2.1.1.3 | ColumncefcModuleResetReason | read-only | current | This object identifies the reason for the last reset performed on the module. |
| 1.3.6.1.4.1.9.9.117.1.2.1.1.4 | ColumncefcModuleStatusLastChangeTime | read-only | current | The value of sysUpTime at the time the cefcModuleOperStatus is changed. |
| 1.3.6.1.4.1.9.9.117.1.2.1.1.5 | ColumncefcModuleLastClearConfigTime | read-only | current | The value of sysUpTime when the configuration was most recently cleared. |
| 1.3.6.1.4.1.9.9.117.1.2.1.1.6 | ColumncefcModuleResetReasonDescription | read-only | current | A description qualifying the module reset reason specified in cefcModuleResetReason. Examples: command xyz missing task switch over watchdog timeout etc. cefcM… |
| 1.3.6.1.4.1.9.9.117.1.2.1.1.7 | ColumncefcModuleStateChangeReasonDescr | read-only | current | This object displays human-readable textual string which describes the cause of the last state change of the module. This object contains zero length string if… |
| 1.3.6.1.4.1.9.9.117.1.2.1.1.8 | ColumncefcModuleUpTime | read-only | current | This object provides the up time for the module since it was last re-initialized. This object is not persistent; if a module reset, restart, power off, the up … |
| 1.3.6.1.4.1.9.9.117.1.2.1.1.9 | ColumncefcVmModuleOperStatus | read-only | current | This object indicates the VM module's operational state. |
| 1.3.6.1.4.1.9.9.117.1.2.1.1.10 | ColumncefcVmModuleStatusLastChangeTime | read-only | current | The value of sysUpTime at the time the cefcVmModuleOperStatus is changed. |
| 1.3.6.1.4.1.9.9.117.1.2.2 | TablecefcIntelliModuleTable | not-accessible | current | This table sparsely augments the cefcModuleTable (i.e., every row in this table corresponds to a row in the cefcModuleTable but not necessarily vice-versa). A … |
| 1.3.6.1.4.1.9.9.117.1.2.2.1 | RowcefcIntelliModuleEntry | not-accessible | current | A cefcIntelliModuleTable entry lists the information specific to an intelligent module which cannot be provided by this module's corresponding instance in the … |
| 1.3.6.1.4.1.9.9.117.1.2.2.1.1 | ColumncefcIntelliModuleIPAddrType | read-only | current | The type of Internet address by which the intelligent module is reachable. |
| 1.3.6.1.4.1.9.9.117.1.2.2.1.2 | ColumncefcIntelliModuleIPAddr | read-only | current | The Internet address configured for the intelligent module. The type of this address is determined by the value of the object cefcIntelliModuleIPAddrType. |
| 1.3.6.1.4.1.9.9.117.1.2.3 | TablecefcModuleLocalSwitchingTable | not-accessible | current | This table sparsely augments the cefcModuleTable (i.e., every row in this table corresponds to a row in the cefcModuleTable but not necessarily vice-versa). A … |
| 1.3.6.1.4.1.9.9.117.1.2.3.1 | RowcefcModuleLocalSwitchingEntry | not-accessible | current | A cefcModuleLocalSwitchingTable entry lists the information specific to a local switching capable module which cannot be provided by this module's correspondin… |
| 1.3.6.1.4.1.9.9.117.1.2.3.1.1 | ColumncefcModuleLocalSwitchingMode | read-write | current | This object specifies the mode of local switching. enabled(1) - local switching is enabled. disabled(2) - local switching is disabled. |
| 1.3.6.1.4.1.9.9.117.1.3 | NodecefcMIBNotificationEnables | |||
| 1.3.6.1.4.1.9.9.117.1.3.1 | ScalarcefcMIBEnableStatusNotification | read-write | current | This variable indicates whether the system produces the following notifications: cefcModuleStatusChange, cefcPowerStatusChange, cefcFRUInserted, cefcFRURemoved… |
| 1.3.6.1.4.1.9.9.117.1.3.2 | ScalarcefcEnablePSOutputChangeNotif | read-write | current | This variable indicates whether the system produces the cefcPowerSupplyOutputChange notifications when the output capacity of a power supply has changed. A fal… |
| 1.3.6.1.4.1.9.9.117.1.4 | NodecefcFRUFan | |||
| 1.3.6.1.4.1.9.9.117.1.4.1 | TablecefcFanTrayStatusTable | not-accessible | current | This table contains the operational status information for all ENTITY-MIB entPhysicalTable entries which have an entPhysicalClass of 'fan'; specifically, all e… |
| 1.3.6.1.4.1.9.9.117.1.4.1.1 | RowcefcFanTrayStatusEntry | not-accessible | current | An cefcFanTrayStatusTable entry lists the operational status information for the ENTITY-MIB entPhysicalTable entry which is identified by the value of entPhysi… |
| 1.3.6.1.4.1.9.9.117.1.4.1.1.1 | ColumncefcFanTrayOperStatus | read-only | current | The operational state of the fan or fan tray. unknown(1) - unknown. up(2) - powered on. down(3) - powered down. warning(4) - partial failure, needs replacement… |
| 1.3.6.1.4.1.9.9.117.1.4.1.1.2 | ColumncefcFanTrayDirection | read-only | current | The air flow direction of the fan or fan tray. unknown(1) - unknown. frontToBack(2) - air flow from front to back backToFront(3) - air flow from back to front |
| 1.3.6.1.4.1.9.9.117.1.4.2 | TablecefcFanTable | not-accessible | current | This table contains a list of fan information for all the fans that have entPhysicalTable entries with 'fan' in the entPhysicalClass and capable of providing m… |
| 1.3.6.1.4.1.9.9.117.1.4.2.1 | RowcefcFanEntry | not-accessible | current | An entry containing management information applicable to a particular fan unit. Entries are created by the agent at system power-up or fan or fan tray insertio… |
| 1.3.6.1.4.1.9.9.117.1.4.2.1.1 | ColumncefcFanSpeed | read-only | current | The speed of the fan. |
| 1.3.6.1.4.1.9.9.117.1.4.2.1.2 | ColumncefcFanSpeedPercent | read-only | current | The percent of speed relative to the maximum speed of the fan. |
| 1.3.6.1.4.1.9.9.117.1.5 | NodecefcPhysical | |||
| 1.3.6.1.4.1.9.9.117.1.5.1 | TablecefcPhysicalTable | not-accessible | current | This table contains one row per physical entity. |
| 1.3.6.1.4.1.9.9.117.1.5.1.1 | RowcefcPhysicalEntry | not-accessible | current | Information about a particular physical entity. |
| 1.3.6.1.4.1.9.9.117.1.5.1.1.1 | ColumncefcPhysicalStatus | read-only | current | The status of this physical entity. other(1) - the status is not any of the listed below. supported(2) - this entity is supported. unsupported(3) - this entity… |
| 1.3.6.1.4.1.9.9.117.1.6 | NodecefcPowerCapacity | |||
| 1.3.6.1.4.1.9.9.117.1.6.1 | TablecefcPowerSupplyInputTable | not-accessible | current | This table contains the power input information for all the power supplies that have entPhysicalTable entries with 'powerSupply' in the entPhysicalClass. The e… |
| 1.3.6.1.4.1.9.9.117.1.6.1.1 | RowcefcPowerSupplyInputEntry | not-accessible | current | An entry containing power input management information applicable to a particular power supply and input. |
| 1.3.6.1.4.1.9.9.117.1.6.1.1.1 | ColumncefcPowerSupplyInputIndex | not-accessible | current | A unique value, greater than zero, for each input on a power supply. |
| 1.3.6.1.4.1.9.9.117.1.6.1.1.2 | ColumncefcPowerSupplyInputType | read-only | current | The type of an input power detected on the power supply. unknown(1): No input power is detected. acLow(2): Lower rating AC input power is detected. acHigh(3): … |
| 1.3.6.1.4.1.9.9.117.1.6.2 | TablecefcPowerSupplyOutputTable | not-accessible | current | This table contains a list of possible output mode for the power supplies, whose ENTITY-MIB entPhysicalTable entries have an entPhysicalClass of 'powerSupply'.… |
| 1.3.6.1.4.1.9.9.117.1.6.2.1 | RowcefcPowerSupplyOutputEntry | not-accessible | current | A cefcPowerSupplyOutputTable entry lists the power output capacity and its operational status for manageable components of type PhysicalClass 'powerSupply'. En… |
| 1.3.6.1.4.1.9.9.117.1.6.2.1.1 | ColumncefcPSOutputModeIndex | not-accessible | current | A unique value, greater than zero, for each possible output mode on a power supply. |
| 1.3.6.1.4.1.9.9.117.1.6.2.1.2 | ColumncefcPSOutputModeCurrent | read-only | current | The output capacity of the power supply. |
| 1.3.6.1.4.1.9.9.117.1.6.2.1.3 | ColumncefcPSOutputModeInOperation | read-only | current | A value of 'true' indicates that this mode is the operational mode of the power supply output capacity. A value of 'false' indicates that this mode is not the … |
| 1.3.6.1.4.1.9.9.117.1.7 | NodecefcCooling | |||
| 1.3.6.1.4.1.9.9.117.1.7.1 | TablecefcChassisCoolingTable | not-accessible | current | This table contains the cooling capacity information of the chassis whose ENTITY-MIB entPhysicalTable entries have an entPhysicalClass of 'chassis'. |
| 1.3.6.1.4.1.9.9.117.1.7.1.1 | RowcefcChassisCoolingEntry | not-accessible | current | A cefcChassisCoolingEntry lists the maximum cooling capacity that could be provided for one slot on the manageable components of type PhysicalClass 'chassis'. … |
| 1.3.6.1.4.1.9.9.117.1.7.1.1.1 | ColumncefcChassisPerSlotCoolingCap | read-only | current | The maximum cooling capacity that could be provided for any slot in this chassis. The default unit of the cooling capacity is 'cfm', if cefcChassisPerSlotCooli… |
| 1.3.6.1.4.1.9.9.117.1.7.1.1.2 | ColumncefcChassisPerSlotCoolingUnit | read-only | current | The unit of the maximum cooling capacity for any slot in this chassis. |
| 1.3.6.1.4.1.9.9.117.1.7.2 | TablecefcFanCoolingTable | not-accessible | current | This table contains the cooling capacity information of the fans whose ENTITY-MIB entPhysicalTable entries have an entPhysicalClass of 'fan'. |
| 1.3.6.1.4.1.9.9.117.1.7.2.1 | RowcefcFanCoolingEntry | not-accessible | current | A cefcFanCoolingEntry lists the cooling capacity that is provided by the manageable components of type PhysicalClass 'fan'. Entries are created by the agent if… |
| 1.3.6.1.4.1.9.9.117.1.7.2.1.1 | ColumncefcFanCoolingCapacity | read-only | current | The cooling capacity that is provided by this fan. The default unit of the fan cooling capacity is 'cfm', if cefcFanCoolingCapacityUnit is not supported. |
| 1.3.6.1.4.1.9.9.117.1.7.2.1.2 | ColumncefcFanCoolingCapacityUnit | read-only | current | The unit of the fan cooling capacity. |
| 1.3.6.1.4.1.9.9.117.1.7.3 | TablecefcModuleCoolingTable | not-accessible | current | This table contains the cooling requirement for all the manageable components of type entPhysicalClass 'module'. |
| 1.3.6.1.4.1.9.9.117.1.7.3.1 | RowcefcModuleCoolingEntry | not-accessible | current | A cefcModuleCoolingEntry lists the cooling requirement for a manageable components of type entPhysicalClass 'module'. Entries are created by the agent at the s… |
| 1.3.6.1.4.1.9.9.117.1.7.3.1.1 | ColumncefcModuleCooling | read-only | current | The cooling requirement of the module and its daughter cards. The default unit of the module cooling requirement is 'cfm', if cefcModuleCoolingUnit is not supp… |
| 1.3.6.1.4.1.9.9.117.1.7.3.1.2 | ColumncefcModuleCoolingUnit | read-only | current | The unit of the cooling requirement of the module and its daughter cards. |
| 1.3.6.1.4.1.9.9.117.1.7.4 | TablecefcFanCoolingCapTable | not-accessible | current | This table contains a list of the possible cooling capacity modes and properties of the fans, whose ENTITY-MIB entPhysicalTable entries have an entPhysicalClas… |
| 1.3.6.1.4.1.9.9.117.1.7.4.1 | RowcefcFanCoolingCapEntry | not-accessible | current | A cefcFanCoolingCapacityEntry lists the cooling capacity mode of a manageable components of type entPhysicalClass 'fan'. It also lists the corresponding coolin… |
| 1.3.6.1.4.1.9.9.117.1.7.4.1.1 | ColumncefcFanCoolingCapIndex | not-accessible | current | An arbitrary value that uniquely identifies a cooling capacity mode for a fan. |
| 1.3.6.1.4.1.9.9.117.1.7.4.1.2 | ColumncefcFanCoolingCapModeDescr | read-only | current | A textual description of the cooling capacity mode of the fan. |
| 1.3.6.1.4.1.9.9.117.1.7.4.1.3 | ColumncefcFanCoolingCapCapacity | read-only | current | The cooling capacity that could be provided when the fan is operating in this mode. The default unit of the cooling capacity is 'cfm', if cefcFanCoolingCapCapa… |
| 1.3.6.1.4.1.9.9.117.1.7.4.1.4 | ColumncefcFanCoolingCapCurrent | read-only | current | The power consumption of the fan when operating in in this mode. |
| 1.3.6.1.4.1.9.9.117.1.7.4.1.5 | ColumncefcFanCoolingCapCapacityUnit | read-only | current | The unit of the fan cooling capacity when operating in this mode. |
| 1.3.6.1.4.1.9.9.117.1.8 | NodecefcConnector | |||
| 1.3.6.1.4.1.9.9.117.1.8.1 | TablecefcConnectorRatingTable | not-accessible | current | This table contains the connector power ratings of FRUs. Only components with power connector rating management are listed in this table. |
| 1.3.6.1.4.1.9.9.117.1.8.1.1 | RowcefcConnectorRatingEntry | not-accessible | current | A cefcConnectorRatingEntry lists the power connector rating information of a component in the system. An entry or entries are created by the agent when an phys… |
| 1.3.6.1.4.1.9.9.117.1.8.1.1.1 | ColumncefcConnectorRating | read-only | current | The maximum power that the component's connector can withdraw. |
| 1.3.6.1.4.1.9.9.117.1.8.2 | TablecefcModulePowerConsumptionTable | not-accessible | current | This table contains the total power consumption information for modules whose ENTITY-MIB entPhysicalTable entries have an entPhysicalClass of 'module'. |
| 1.3.6.1.4.1.9.9.117.1.8.2.1 | RowcefcModulePowerConsumptionEntry | not-accessible | current | A cefcModulePowerConsumptionEntry lists the total power consumption of a manageable components of type entPhysicalClass 'module'. Entries are created by the ag… |
| 1.3.6.1.4.1.9.9.117.1.8.2.1.1 | ColumncefcModulePowerConsumption | read-only | current | The combined power consumption to operate the module and its submodule(s) and inline-power device(s). |
| 1.3.6.1.4.1.9.9.117.2 | NodecefcFRUMIBNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.117.2.0 | NodecefcMIBNotifications | |||
| 1.3.6.1.4.1.9.9.117.2.0.1 | NotificationcefcModuleStatusChange | current | This notification is generated when the value of cefcModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing. | |
| 1.3.6.1.4.1.9.9.117.2.0.2 | NotificationcefcPowerStatusChange | current | The cefcFRUPowerStatusChange notification indicates that the power status of a FRU has changed. The varbind for this notification indicates the entPhysicalInde… | |
| 1.3.6.1.4.1.9.9.117.2.0.3 | NotificationcefcFRUInserted | current | The cecfFRUInserted notification indicates that a FRU was inserted. The varbind for this notification indicates the entPhysicalIndex of the inserted FRU, and t… | |
| 1.3.6.1.4.1.9.9.117.2.0.4 | NotificationcefcFRURemoved | current | The cefcFRURemoved notification indicates that a FRU was removed. The varbind for this notification indicates the entPhysicalIndex of the removed FRU, and the … | |
| 1.3.6.1.4.1.9.9.117.2.0.5 | NotificationcefcUnrecognizedFRU | current | The cefcUnrecognizedFRU notification indicates that a FRU was inserted whose product ID is not supported. The varbind for this notification indicates the entPh… | |
| 1.3.6.1.4.1.9.9.117.2.0.6 | NotificationcefcFanTrayStatusChange | current | This notification is generated when the value of cefcFanTrayOperStatus changes. | |
| 1.3.6.1.4.1.9.9.117.2.0.7 | NotificationcefcPowerSupplyOutputChange | current | The notification indicates that the power supply's output capacity has changed. This notification is triggered whenever one instance of the power supply's cefc… | |
| 1.3.6.1.4.1.9.9.117.2.0.8 | NotificationcefcVmModuleStatusChangeNotif | current | This notification is generated when the value of cefcVmModuleOperStatus changes. It can be utilized by an NMS to update the status of the module it is managing. | |
| 1.3.6.1.4.1.9.9.117.3 | NodecefcMIBConformance | |||
| 1.3.6.1.4.1.9.9.117.3.1 | NodecefcMIBCompliances | |||
| 1.3.6.1.4.1.9.9.117.3.1.1 | CompliancecefcMIBPowerCompliance | obsolete | An Entity-MIB implementation can implement this group to provide FRU power status and control. | |
| 1.3.6.1.4.1.9.9.117.3.1.2 | CompliancecefcMIBPowerCompliance2 | deprecated | An Entity-MIB implementation can implement this group to provide FRU power status and control. | |
| 1.3.6.1.4.1.9.9.117.3.1.3 | CompliancecefcMIBPowerCompliance3 | deprecated | An Entity-MIB implementation can implement this group to provide FRU power status and control. | |
| 1.3.6.1.4.1.9.9.117.3.1.4 | CompliancecefcMIBPowerCompliance4 | read-only | deprecated | An Entity-MIB implementation can implement this group to provide FRU power status and control. |
| 1.3.6.1.4.1.9.9.117.3.1.5 | CompliancecefcMIBPowerCompliance5 | read-only | deprecated | An Entity-MIB implementation can implement this group to provide FRU power status and control. |
| 1.3.6.1.4.1.9.9.117.3.1.6 | CompliancecefcMIBPowerCompliance6 | read-only | current | An Entity-MIB implementation can implement this group to provide FRU power status and control. |
| 1.3.6.1.4.1.9.9.117.3.1.7 | CompliancecefcMIBPowerCompliance7 | read-only | deprecated | An Entity-MIB implementation can implement this group to provide FRU power status and control. |
| 1.3.6.1.4.1.9.9.117.3.1.8 | CompliancecefcMIBPowerCompliance8 | read-only | deprecated | An Entity-MIB implementation can implement this group to provide FRU power status and control. |
| 1.3.6.1.4.1.9.9.117.3.1.9 | CompliancecefcMIBPowerCompliance9 | read-only | deprecated | An Entity-MIB implementation can implement this group to provide FRU power status and control. |
| 1.3.6.1.4.1.9.9.117.3.1.10 | CompliancecefcMIBPowerCompliance10 | read-only | current | An Entity-MIB implementation can implement this group to provide FRU power status and control. |
| 1.3.6.1.4.1.9.9.117.3.2 | NodecefcMIBGroups | |||
| 1.3.6.1.4.1.9.9.117.3.2.1 | GroupcefcMIBPowerModeGroup | current | The collection of objects which are used to configure and monitor power-control for FRUs. | |
| 1.3.6.1.4.1.9.9.117.3.2.2 | GroupcefcMIBPowerFRUControlGroup | current | The collection of objects which are used to configure and monitor power-control for FRUs. | |
| 1.3.6.1.4.1.9.9.117.3.2.3 | GroupcefcMIBModuleGroup | current | The collection of objects which are used to get the operational state and redundancy state of the modules | |
| 1.3.6.1.4.1.9.9.117.3.2.4 | GroupcefcMIBInLinePowerControlGroup | deprecated | The collection of objects which are used to configure and monitor inline power control for FRUs. | |
| 1.3.6.1.4.1.9.9.117.3.2.5 | GroupcefcMIBNotificationEnablesGroup | current | The collection of objects which are used to enable notification. | |
| 1.3.6.1.4.1.9.9.117.3.2.6 | GroupcefcMgmtNotificationsGroup | current | The notifications which a FRU Management entity is required to implement. | |
| 1.3.6.1.4.1.9.9.117.3.2.7 | GroupcefcModuleGroupRev1 | current | The collection of objects which are used to get the operational state and redundancy state of the modules | |
| 1.3.6.1.4.1.9.9.117.3.2.8 | GroupcefcMIBPowerFRUValueGroup | current | The collection of objects which are used to retrieve the total and used capacity of a power supply for both system and inline power. | |
| 1.3.6.1.4.1.9.9.117.3.2.9 | GroupcefcMIBFanTrayStatusGroup | current | The collection of objects which show information of the status of Fan Tray FRUs. | |
| 1.3.6.1.4.1.9.9.117.3.2.10 | GroupcefcMIBPhysicalGroup | current | The collection of objects which show information of the Physical Entity. | |
| 1.3.6.1.4.1.9.9.117.3.2.11 | GroupcefcMgmtNotificationsGroup2 | current | The additional notifications for FRU status. | |
| 1.3.6.1.4.1.9.9.117.3.2.12 | GroupcefcMIBPowerOperModeGroup | current | The collection of objects which are used to monitor the device's power supply operational redundancy mode. | |
| 1.3.6.1.4.1.9.9.117.3.2.13 | GroupcefcMIBInLinePowerControlGroupRev1 | current | The collection of objects which are used to configure and monitor inline power control for FRUs. | |
| 1.3.6.1.4.1.9.9.117.3.2.14 | GroupcefcModuleExtGroup | current | The collection of objects which are used to get the state change reason and up time of the modules. | |
| 1.3.6.1.4.1.9.9.117.3.2.15 | GroupcefcIntelliModuleGroup | current | The collection of objects which are used to get the information specific to intelligent modules. | |
| 1.3.6.1.4.1.9.9.117.3.2.16 | GroupcefcPowerCapacityGroup | current | The collection of objects which are used to get the power capacity information | |
| 1.3.6.1.4.1.9.9.117.3.2.17 | GroupcefcCoolingGroup | deprecated | The collection of objects which are used to get the cooling capacity information. | |
| 1.3.6.1.4.1.9.9.117.3.2.18 | GroupcefcConnectorRatingGroup | current | The collection of objects which are used to get the power connector rating and module power total consumption information. | |
| 1.3.6.1.4.1.9.9.117.3.2.19 | GroupcefcMIBNotificationEnablesGroup2 | current | The collection of objects which are used to enable additional group of notifications. | |
| 1.3.6.1.4.1.9.9.117.3.2.20 | GroupcefcMgmtNotificationsGroup3 | current | The additional notification for notify the power capacity mode change. | |
| 1.3.6.1.4.1.9.9.117.3.2.21 | GroupcefcMIBInLinePowerCurrentGroup | current | The collection of objects which are used to monitor inline power usage for FRUs. | |
| 1.3.6.1.4.1.9.9.117.3.2.22 | GroupcefcMIBPowerRedundancyInfoGroup | current | The collection of objects provide additional information about the device's power supply redundancy. | |
| 1.3.6.1.4.1.9.9.117.3.2.23 | GroupcefcFanCoolingCapGroup | current | The collection of objects provide the cooling capacity modes and properties of the fans. | |
| 1.3.6.1.4.1.9.9.117.3.2.24 | GroupcefcMIBModuleLocalSwitchingGroup | current | The collection of objects which show information of the local switching status of modules. | |
| 1.3.6.1.4.1.9.9.117.3.2.25 | GroupcefcFRUPowerRealTimeStatusGroup | current | The collection of objects provide the power-related realtime information of the manageable entities. | |
| 1.3.6.1.4.1.9.9.117.3.2.26 | GroupcefcFRUPowerCapabilityGroup | current | The collection of objects provide the power-related capability information of the manageable entities. | |
| 1.3.6.1.4.1.9.9.117.3.2.27 | GroupcefcFRUCoolingUnitGroup | current | The collection of objects provide the cooling unit information of the manageable entities. | |
| 1.3.6.1.4.1.9.9.117.3.2.28 | GroupcefcFRUFanCoolingUnitGroup | current | The collection of objects provide the cooling unit information of the manageable fan entities. | |
| 1.3.6.1.4.1.9.9.117.3.2.29 | GroupcefcCoolingGroup2 | current | The collection of objects which are used to get the cooling capacity or requirement information. | |
| 1.3.6.1.4.1.9.9.117.3.2.30 | GroupcefcFanCoolingGroup | current | The collection of objects provide the cooling capacity modes and properties of the fans. | |
| 1.3.6.1.4.1.9.9.117.3.2.31 | GroupcefcFanDirectionGroup | current | The collection of objects provide the direction information of the manageable fan entities. | |
| 1.3.6.1.4.1.9.9.117.3.2.32 | GroupcefcFanSpeedGroup | current | The collection of objects provide the speed information of the manageable fan entities. | |
| 1.3.6.1.4.1.9.9.117.3.2.33 | GroupcefcPowerSupplyActualGroup | current | The collection of objects which are used to retrieve the actual input and output current of a power supply. | |
| 1.3.6.1.4.1.9.9.117.3.2.34 | GroupcefcVmModuleGroup | current | The collection of objects which povide the VM module opertional status information. | |
| 1.3.6.1.4.1.9.9.117.3.2.35 | GroupcefcVmModuleNotifsGroup | current | A collection of notifications for VM module status change. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CefcPercentOrMinusOne | Integer32 (-1 | 0..100) | current | An integer that is in the range of a percent value. A value of -1 means that the percentage is not available. |
| CefcVmModuleOperType | INTEGER { down(1), up(2), unknown(3), goingDown(4) } | current | Operational VM module states. Valid values are : down(1) module is down. up(2) module is operational. unknown(3) module is unknown. goingDown(4) module is goingDown from Up. |
| FRUCoolingUnit | INTEGER { cfm(1), watts(2) } | current | The unit for the cooling capacity and requirement. cfm(1) Cubic feet per minute watts(2) Watts |
| FRUCurrentType | Integer32 (-1000000000..1000000000) | current | a current measurement, on the system power supply primary output, expressed in cefcPowerUnits. Range is from negative 1 million to positive one million amperes. A negative value expresses current used by the FRU. A posi… |
| FRUTimeSeconds | Unsigned32 | current | This is a non-negative integer which represents the time in second between two epochs. Since time is not discrete, it is rounded up to the nearest second. For example, if the elapsed time is greater than zero and less o… |
| ModuleAdminType | INTEGER { enabled(1), disabled(2), reset(3), outOfServiceAdmin(4) } | current | Administratively desired module states. Valid values are: enabled(1) module is operational. disabled(2) module is not operational. reset(3) module is reset. This value may be specified in a management protocol set opera… |
| ModuleOperType | INTEGER { unknown(1), ok(2), disabled(3), okButDiagFailed(4), boot(5), selfTest(6), failed(7), missing(8), mismatchWithParent(9), mismatchConfig(10), diagFailed(11), dormant(12), outOfServiceAdmin(13), outOfServiceEnvTemp(14), poweredDown(15), poweredUp(16), powerDenied(17), powerCycled(18), okButPowerOverWarning(19), okButPowerOverCritical(20), syncInProgress(21), upgrading(22), okButAuthFailed(23), mdr(24), fwMismatchFound(25), fwDownloadSuccess(26), fwDownloadFailure(27) } | current | Operational module states. Valid values are : unknown(1) Module is not in one of other states normal operational states: ok(2) Module is operational. disabled(3) Module is administratively disabled. okButDiagFailed(4) M… |
| ModuleResetReasonType | INTEGER { unknown(1), powerUp(2), parityError(3), clearConfigReset(4), manualReset(5), watchDogTimeoutReset(6), resourceOverflowReset(7), missingTaskReset(8), lowVoltageReset(9), controllerReset(10), systemReset(11), switchoverReset(12), upgradeReset(13), downgradeReset(14), cacheErrorReset(15), deviceDriverReset(16), softwareExceptionReset(17), restoreConfigReset(18), abortRevReset(19), burnBootReset(20), standbyCdHealthierReset(21), nonNativeConfigClearReset(22), memoryProtectionErrorReset(23) } | current | Describes the reason for the last module reset operation. unknown(1) source of the reset is not identified powerUp(2) system power up operation parityError(3) parity error during system bring up operation clearConfigRes… |
| PowerAdminType | INTEGER { on(1), off(2), inlineAuto(3), inlineOn(4), powerCycle(5) } | current | Administratively desired FRU power state types. valid values are: on(1): Turn FRU on. off(2): Turn FRU off. The inline power means that the FRU itself won't cost any power, but the external device connecting to the FRU … |
| PowerOperType | INTEGER { offEnvOther(1), on(2), offAdmin(3), offDenied(4), offEnvPower(5), offEnvTemp(6), offEnvFan(7), failed(8), onButFanFail(9), offCooling(10), offConnectorRating(11), onButInlinePowerFail(12) } | current | Operational FRU Status types. valid values are: offEnvOther(1) FRU is powered off because of a problem not listed below. on(2): FRU is powered on. offAdmin(3): Administratively off. offDenied(4): FRU is powered off beca… |
| PowerRedundancyType | INTEGER { notsupported(1), redundant(2), combined(3), nonRedundant(4), psRedundant(5), inPwrSrcRedundant(6), psRedundantSingleInput(7) } | current | power supply redundancy modes. valid values are: notsupported(1): Read-only operational state, indicates that the requested administrative state (redundant(2), combined(3), psRedundant(5), inPwrSrcRedundant(6) or psRedu… |