CISCO-ENTITY-PERFORMANCE-MIB
62 objects
This MIB module defines managed objects that facilitate to monitor performance of any physical entity, which are listed in the ENTITY-MIB (RFC 4133) entPhysicalTable. The performance monitoring includes utilization, input/output packet/byte rates, etc. This monitoring is through the measurement periods of current, 1-minute, 5-minutes, 15-minutes. The performance data calculation method would vary for each entity for a specific interval, hence users of this MIB should obtain the information using the object cepStatsAlgorithm for a specific interval. The performance statistics can be accumulated for the 1-minute, 5-minutes and 15-minutes (recommended) intervals. At any one time, an agent maintains one current (incomplete) interval for each interval type and up to 96 completed interval number. Fewer than 96 interval number of data will be available if the agent has been restarted within the last 24 hours for 15 minutes interval, 8 hours for 5 minutes interval, and 1.36 hours for 1 minute interval. There is no requirement for an agent to ensure fixed relationship between the start of a one/five/fifteen minute intervals and wall clock, however some agents may align the fifteen minutes interval with quarter hours. The following terminologies apply within the scope of this MIB. o entity - Any physical entity which can support performance monitoring as specified in this MIB o Utilization - The ratio of current usage to the maximum capacity the entity can handle o Input - Communication channel where packets arrive on the entity o Output - Communication channel where packets leave the entity Acronyms ======== SMA - Simple Moving Average
Imported Objects
| CISCO-SMI | ciscoMgmt |
| ENTITY-MIB | entPhysicalIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.756 | IdentityciscoEntityPerformanceMIB | This MIB module defines managed objects that facilitate to monitor performance of any physical entity, which are listed in the ENTITY-MIB (RFC 4133) entPhysica… | ||
| 1.3.6.1.4.1.9.9.756.0 | NodeciscoEntityPerformanceMIBNotifs | |||
| 1.3.6.1.4.1.9.9.756.0.1 | NotificationcepPerfThreshRisingEvent | current | A notification indicating that the specific performance measurement is rising the configured threshold on this physical entity at a specific performance interv… | |
| 1.3.6.1.4.1.9.9.756.0.2 | NotificationcepPerfThreshFallingEvent | current | A notification indicating that the specific performance measurement is falling the configured threshold on this physical entity at a specific performance inter… | |
| 1.3.6.1.4.1.9.9.756.0.3 | NotificationcepThroughputNotif | current | A notification indicating that the average throughput rate for the configured interval has exceeded the threshold or reached maximum bandwidth allowed. This no… | |
| 1.3.6.1.4.1.9.9.756.1 | NodeciscoEntityPerformanceMIBObjects | |||
| 1.3.6.1.4.1.9.9.756.1.1 | TablecepEntityTable | not-accessible | current | This table maintains the specific performance information for each physical entity, which supports performance monitoring. An agent creates a conceptual row to… |
| 1.3.6.1.4.1.9.9.756.1.1.1 | RowcepEntityEntry | not-accessible | current | A conceptual row in the cepEntityTable. There is an entry in this table for each entity which supports performance monitoring, as defined by a value of entPhys… |
| 1.3.6.1.4.1.9.9.756.1.1.1.1 | ColumncepEntityNumReloads | read-only | current | This object provides the number of times the entity is reloaded, since the entity host is up. |
| 1.3.6.1.4.1.9.9.756.1.1.1.2 | ColumncepEntityLastReloadTime | read-only | current | This object provides the entity last reload time. |
| 1.3.6.1.4.1.9.9.756.1.2 | TablecepConfigTable | not-accessible | current | This table maintains the performance configuration information for each physical entity at various performance time intervals such as current, 1 minute, etc. A… |
| 1.3.6.1.4.1.9.9.756.1.2.1 | RowcepConfigEntry | not-accessible | current | A conceptual row in the cepConfigTable. There is an entry in this table for each entity by a value of entPhysicalIndex, the supported performance time interval… |
| 1.3.6.1.4.1.9.9.756.1.2.1.1 | ColumncepConfigInterval | not-accessible | current | This object identifies the time interval for which the performance configuration being applied. The interval values can be current, 1 minute, etc. as specified… |
| 1.3.6.1.4.1.9.9.756.1.2.1.2 | ColumncepConfigPerfType | not-accessible | current | This object identifies the performance measurement type for which the performance configuration being applied. |
| 1.3.6.1.4.1.9.9.756.1.2.1.3 | ColumncepConfigPerfRange | read-only | current | This object indicates the range used by the performance configuration objects such as cepConfigRisingThreshold, etc. for the specific performance measurement t… |
| 1.3.6.1.4.1.9.9.756.1.2.1.4 | ColumncepConfigRisingThreshold | read-write | current | This object contains the rising threshold value for a specific performance measurement type at a specific performance time interval. The value of this object m… |
| 1.3.6.1.4.1.9.9.756.1.2.1.5 | ColumncepConfigFallingThreshold | read-write | current | This object contains the falling threshold value for a specific performance measurement type at a specific performance interval. The value of this object must … |
| 1.3.6.1.4.1.9.9.756.1.2.1.6 | ColumncepConfigThresholdNotifEnabled | read-write | current | This object provides the control to the threshold notification for a specific entity performance type at a specific interval. The notification will be sent bas… |
| 1.3.6.1.4.1.9.9.756.1.3 | TablecepStatsTable | not-accessible | current | This table maintains entity running performance, which are collected at various performance intervals. An agent creates a conceptual row to this table correspo… |
| 1.3.6.1.4.1.9.9.756.1.3.1 | RowcepStatsEntry | not-accessible | current | A conceptual row in the cepStatsTable. There is an entry in this table for each entity by a value of entPhysicalIndex, the supported performance time interval … |
| 1.3.6.1.4.1.9.9.756.1.3.1.1 | ColumncepStatsAlgorithm | read-only | current | This object provides the algorithm used to calculate the entity performance statistics over the specified interval. |
| 1.3.6.1.4.1.9.9.756.1.3.1.2 | ColumncepStatsMeasurement | read-only | current | This object provides a specific performance measurement of the entity over the specified interval. The range of this object can be identified by the object 'ce… |
| 1.3.6.1.4.1.9.9.756.1.4 | TablecepEntityIntervalTable | not-accessible | current | This table maintains the interval information for each entity at various interval period. An agent creates a conceptual row to this table corresponding to a ph… |
| 1.3.6.1.4.1.9.9.756.1.4.1 | RowcepEntityIntervalEntry | not-accessible | current | A conceptual row in the cepEntityIntervalTable. There is an entry in this table for each entity by a value of entPhysicalIndex, and the supported performance h… |
| 1.3.6.1.4.1.9.9.756.1.4.1.1 | ColumncepHistInterval | not-accessible | current | This object identifies the time interval for which the performance history being applied. The interval values can be 1 minute, 5 minutes, etc. as specified in … |
| 1.3.6.1.4.1.9.9.756.1.4.1.2 | ColumncepIntervalTimeElapsed | read-only | current | This object provides the number of seconds that have elapsed since the beginning of the chosen interval on this entity. If for some reason, such as an adjustme… |
| 1.3.6.1.4.1.9.9.756.1.4.1.3 | ColumncepValidIntervalCount | read-only | current | This object provides the number of completed intervals for which valid entity performance data has been collected for the chosen interval. The value will be 96… |
| 1.3.6.1.4.1.9.9.756.1.5 | TablecepIntervalStatsTable | not-accessible | current | This table contains specific performance statistics collected by each entity over the specified interval. The table has the maximum of 96 buckets for all the s… |
| 1.3.6.1.4.1.9.9.756.1.5.1 | RowcepIntervalStatsEntry | not-accessible | current | A conceptual row in the cepIntervalStatsTable. There is an entry in this table for each entity by a value of entPhysicalIndex, the supported performance histor… |
| 1.3.6.1.4.1.9.9.756.1.5.1.1 | ColumncepIntervalNumber | not-accessible | current | An interval number between 1 and 96, where 1 is the most recently completed interval and 96 is the least recently completed interval. For example, if it is 15 … |
| 1.3.6.1.4.1.9.9.756.1.5.1.2 | ColumncepIntervalStatsValidData | read-only | current | This object indicates whether the performance statistics for this interval is valid. The value 'true' means the performance statistics is valid, otherwise the … |
| 1.3.6.1.4.1.9.9.756.1.5.1.3 | ColumncepIntervalStatsRange | read-only | current | This object provides the range information for the object 'cepIntervalStatsMeasurement'. |
| 1.3.6.1.4.1.9.9.756.1.5.1.4 | ColumncepIntervalStatsMeasurement | read-only | current | This object provides the specific performance statistics of an entity over the specified interval. The range of this object can be identified by object 'cepInt… |
| 1.3.6.1.4.1.9.9.756.1.5.1.5 | ColumncepIntervalStatsCreateTime | read-only | current | This object provides the time stamp at which the specific performance statistics gets created. |
| 1.3.6.1.4.1.9.9.756.1.6 | NodeciscoEntityPerformanceMIBNotifObjects | |||
| 1.3.6.1.4.1.9.9.756.1.6.1 | ScalarcepThresholdNotifEnabled | read-write | current | This object controls the entity performance measurement rising/falling threshold notification. When this object contains a value of 'true', then generation of … |
| 1.3.6.1.4.1.9.9.756.1.6.2 | ScalarcepThroughputNotifEnabled | read-write | current | This object controls throughput rate notification. When this object contains a value 'true', then generation of cepThroughputNotif is enabled. If this object c… |
| 1.3.6.1.4.1.9.9.756.1.7 | TablecepThroughputTable | not-accessible | current | This table maintains the specific throughput information for each physical entity, which supports throughput monitoring. An agent creates a conceptual row to t… |
| 1.3.6.1.4.1.9.9.756.1.7.1 | RowcepThroughputEntry | not-accessible | current | A conceptual row in the cepThroughputTable. There is an entry in this table for each entity which supports throughput monitoring, as defined by a value of entP… |
| 1.3.6.1.4.1.9.9.756.1.7.1.1 | ColumncepThroughputLicensedBW | read-only | current | This object represents the bandwidth for installed throughput license of the entity. |
| 1.3.6.1.4.1.9.9.756.1.7.1.2 | ColumncepThroughputLevel | read-only | current | This object represents the current throughput level for installed throughput license of the entity. normal (1) - Throughput usage is normal warning (2) - Throu… |
| 1.3.6.1.4.1.9.9.756.1.7.1.3 | ColumncepThroughputInterval | read-write | current | The object represents the configured time interval at which the cepThroughputLevel is checked for this entity. |
| 1.3.6.1.4.1.9.9.756.1.7.1.4 | ColumncepThroughputThreshold | read-write | current | The object represents the configured throughput threshold for this entity. |
| 1.3.6.1.4.1.9.9.756.1.7.1.5 | ColumncepThroughputAvgRate | read-only | current | The object represents the average throughput rate in the interval cepThroughputInterval for this entity. |
| 1.3.6.1.4.1.9.9.756.2 | NodeciscoEntityPerformanceMIBConform | |||
| 1.3.6.1.4.1.9.9.756.2.1 | NodeciscoEntityPerformanceMIBCompliances | |||
| 1.3.6.1.4.1.9.9.756.2.1.1 | ComplianceciscoEntityPerformanceMIBCompliance | read-only | current | The compliance statement for CISCO-ENTITY-PERFORMANCE-MIB. |
| 1.3.6.1.4.1.9.9.756.2.2 | NodeciscoEntityPerformanceMIBGroups | |||
| 1.3.6.1.4.1.9.9.756.2.2.1 | GroupciscoEntityPerformanceMIBEntityGroup | current | This group contains collection of entity information objects. | |
| 1.3.6.1.4.1.9.9.756.2.2.2 | GroupciscoEntityPerformanceMIBConfigGroup | current | This group contains collection of configuration objects related to performance. | |
| 1.3.6.1.4.1.9.9.756.2.2.3 | GroupciscoEntityPerformanceMIBPerfStatsGroup | current | This group contains collection of performance statistics information objects. | |
| 1.3.6.1.4.1.9.9.756.2.2.4 | GroupciscoEntityPerformanceMIBEntityIntervalGroup | current | This group contains collection of performance interval data objects. | |
| 1.3.6.1.4.1.9.9.756.2.2.5 | GroupciscoEntityPerformanceMIBIntervalStatsGroup | current | This group contains collection of performance interval statistics objects. | |
| 1.3.6.1.4.1.9.9.756.2.2.6 | GroupciscoEntityPerformanceMIBNotifControlGroup | current | This group contains collection of notification control objects. | |
| 1.3.6.1.4.1.9.9.756.2.2.7 | GroupciscoEntityPerformanceMIBNotificationGroup | current | This group contains collection of performance notification objects. | |
| 1.3.6.1.4.1.9.9.756.2.2.8 | GroupciscoEntityPerformanceMIBThroughputGroup | current | This group contains collection of throughput rate objects. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CiscoEntPerfHistInterval | INTEGER { oneMinute(1), fiveMinutes(2), fifteenMinutes(3) } | current | This textual convention denotes an enumerated integer-value that represents the available interval values for which the historic performance statistics are to be collected. oneMinute (1) - Last 1 minute statistics fiveM… |
| CiscoEntPerfInterval | INTEGER { current(1), oneMinute(2), fiveMinutes(3), fifteenMinutes(4) } | current | This textual convention denotes an enumerated integer-value that represents the available interval values for which the periodic statistics are to be collected. current (1) - Current interval to collect statistics. In c… |
| CiscoEntPerfIntervalAlgo | INTEGER { unknown(1), other(2), current(3), algoSMA(4) } | current | This textual convention denotes an enumerated integer-value that represents the method used to calculate the specific interval data. unknown (1) - The calculation method is unknown other (2) - The calculation method is … |
| CiscoEntPerfMeasurement | Counter64 | current | This textual convention indicates the measurement of entity performance. |
| CiscoEntPerfRange | INTEGER { rangePercentage(1), rangeInt32(2), rangeInt64(3) } | current | This textual convention indicates the allowed range for the specified measurement of entity performance. rangePercentage(1) 0 - 100 rangeInt32(2) 0 - 4294967295 rangeInt64(3) 0 - 18446744073709551615 |
| CiscoEntPerfType | INTEGER { utilization(1), bitInputRate(2), bitOutputRate(3), bitDropRate(4), packetInputRate(5), packetOutputRate(6), packetDropRate(7) } | current | This textual convention denotes an enumerated integer-value that represents the available various measurement types. utilization(1) - The ratio of current usage to the maximum capacity the entity can handle bitInputRate… |