CISCO-ENTITY-QFP-MIB
80 objects
This MIB module defines managed objects that facilitate the management of Quantum Flow Processors (QFP), which are listed in the ENTITY-MIB (RFC 4133) entPhysicalTable as an entPhysicalClass of 'cpu'. The Quantum Flow Processors (QFP) technology is an architecture family developed by Cisco, which has fully integrated and programmable networking chip set that controls different functions of a system such as packet forwarding. This module contains objects to monitor various QFP statistics such as system, utilization, memory, etc. The utilization statistics can be used for future capacity planning. The calculation of this statistics may vary by devices which host QFPs, hence the user must refer to the specific device document of interest for the exact method of calculation. The utilization statistics have the following terminology. o Input - Communication channel where packets arrive on the QFP. o Output - Communication channel where packets leave the QFP. o Priority - A classification applied to packets indicating they should be treated with greater urgency. o Non-Priority - A classification applied to packets indicating they should be treated with lesser urgency. o Processing Load - The percentage of time over some interval that the QFP has spent forwarding packets, relative to the total time spent both forwarding packets and being idle.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| ENTITY-MIB | entPhysicalIndex |
| HCNUM-TC | CounterBasedGauge64 |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.715 | IdentityciscoEntityQfpMIB | This MIB module defines managed objects that facilitate the management of Quantum Flow Processors (QFP), which are listed in the ENTITY-MIB (RFC 4133) entPhysi… | ||
| 1.3.6.1.4.1.9.9.715.0 | NodeciscoEntityQfpMIBNotifs | |||
| 1.3.6.1.4.1.9.9.715.0.1 | NotificationceqfpMemoryResRisingThreshNotif | current | A notification indicating that the QFP memory usage is rising the threshold on this memory resource. This notification will be sent, whenever the QFP memory us… | |
| 1.3.6.1.4.1.9.9.715.0.2 | NotificationceqfpMemoryResFallingThreshNotif | current | A notification indicating that the QFP memory usage is equal to or below the falling threshold on this memory resource. This notification will be sent, wheneve… | |
| 1.3.6.1.4.1.9.9.715.0.3 | NotificationceqfpThroughputNotif | current | A notification indicating that the average throughput rate for the configured interval has exceeded the threshold or reached maximum bandwidth allowed. This no… | |
| 1.3.6.1.4.1.9.9.715.1 | NodeciscoEntityQfpMIBObjects | |||
| 1.3.6.1.4.1.9.9.715.1.1 | NodeciscoEntityQfp | |||
| 1.3.6.1.4.1.9.9.715.1.1.1 | TableceqfpSystemTable | not-accessible | current | This table maintains the QFP system information for each QFP physical entity. An agent creates a conceptual row to this table corresponding to a QFP physical e… |
| 1.3.6.1.4.1.9.9.715.1.1.1.1 | RowceqfpSystemEntry | not-accessible | current | A conceptual row in the ceqfpSystemTable. There is an entry in this table for each QFP entity, as defined by a value of entPhysicalIndex. |
| 1.3.6.1.4.1.9.9.715.1.1.1.1.1 | ColumnceqfpSystemTrafficDirection | read-only | current | This object represents the traffic direction that this QFP is assigned to process. The enumerated values are described below. none (1) - The QFP is not assigne… |
| 1.3.6.1.4.1.9.9.715.1.1.1.1.2 | ColumnceqfpSystemState | read-only | current | This object represents the current QFP state. The enumerated values are described below. unknown (1) - The state of the QFP is unknown reset (2) - The QFP is r… |
| 1.3.6.1.4.1.9.9.715.1.1.1.1.3 | ColumnceqfpNumberSystemLoads | read-only | current | This object represents the number of times the QFP is loaded, since the QFP host is up. |
| 1.3.6.1.4.1.9.9.715.1.1.1.1.4 | ColumnceqfpSystemLastLoadTime | read-only | current | This object represents the QFP last load time. |
| 1.3.6.1.4.1.9.9.715.1.1.2 | ScalarceqfpFiveSecondUtilAlgo | read-only | current | This objects represents the method used to calculate 5 Second interval utilization data. The enumerated values are described below. unknown (1) - The calculati… |
| 1.3.6.1.4.1.9.9.715.1.1.3 | ScalarceqfpOneMinuteUtilAlgo | read-only | current | This objects represents the method used to calculate 1 Minute interval utilization data. The enumerated values are described below. unknown (1) - The calculati… |
| 1.3.6.1.4.1.9.9.715.1.1.4 | ScalarceqfpFiveMinutesUtilAlgo | read-only | current | This objects represents the method used to calculate 5 Minutes interval utilization data. The enumerated values are described below. unknown (1) - The calculat… |
| 1.3.6.1.4.1.9.9.715.1.1.5 | ScalarceqfpSixtyMinutesUtilAlgo | read-only | current | This objects represents the method used to calculate 60 Minutes interval utilization data. The enumerated values are described below. unknown (1) - The calcula… |
| 1.3.6.1.4.1.9.9.715.1.1.6 | TableceqfpUtilizationTable | not-accessible | current | This table maintains the utilization statistics collected by each QFP physical entity at various time interval such as last 5 seconds, 1 minute, etc. An agent … |
| 1.3.6.1.4.1.9.9.715.1.1.6.1 | RowceqfpUtilizationEntry | not-accessible | current | A conceptual row in the ceqfpUtilizationTable. There is an entry in this table for each QFP entity by a value of entPhysicalIndex and the supported time interv… |
| 1.3.6.1.4.1.9.9.715.1.1.6.1.1 | ColumnceqfpUtilTimeInterval | not-accessible | current | This object identifies the time interval for which the utilization statistics being collected. The interval values can be 5 second, 1 minute, etc. as specified… |
| 1.3.6.1.4.1.9.9.715.1.1.6.1.2 | ColumnceqfpUtilInputPriorityPktRate | read-only | current | This object represents the QFP input channel priority packet rate during this interval. |
| 1.3.6.1.4.1.9.9.715.1.1.6.1.3 | ColumnceqfpUtilInputPriorityBitRate | read-only | current | This object represents the QFP input channel priority bit rate during this interval. |
| 1.3.6.1.4.1.9.9.715.1.1.6.1.4 | ColumnceqfpUtilInputNonPriorityPktRate | read-only | current | This object represents the QFP input channel non-priority packet rate during this interval. |
| 1.3.6.1.4.1.9.9.715.1.1.6.1.5 | ColumnceqfpUtilInputNonPriorityBitRate | read-only | current | This object represents the QFP input channel non-priority bit rate during this interval. |
| 1.3.6.1.4.1.9.9.715.1.1.6.1.6 | ColumnceqfpUtilInputTotalPktRate | read-only | current | This object represents the QFP input channel total packet rate during this interval, which includes both priority and non-priority input packet rate. |
| 1.3.6.1.4.1.9.9.715.1.1.6.1.7 | ColumnceqfpUtilInputTotalBitRate | read-only | current | This object represents the QFP input channel total bit rate during this interval, which includes both priority and non-priority input bit rate. |
| 1.3.6.1.4.1.9.9.715.1.1.6.1.8 | ColumnceqfpUtilOutputPriorityPktRate | read-only | current | This object represents the QFP output channel priority packet rate during this interval. |
| 1.3.6.1.4.1.9.9.715.1.1.6.1.9 | ColumnceqfpUtilOutputPriorityBitRate | read-only | current | This object represents the QFP output channel priority bit rate during this interval. |
| 1.3.6.1.4.1.9.9.715.1.1.6.1.10 | ColumnceqfpUtilOutputNonPriorityPktRate | read-only | current | This object represents the QFP output channel non-priority packet rate during this interval. |
| 1.3.6.1.4.1.9.9.715.1.1.6.1.11 | ColumnceqfpUtilOutputNonPriorityBitRate | read-only | current | This object represents the QFP output channel non-priority bit rate during this interval. |
| 1.3.6.1.4.1.9.9.715.1.1.6.1.12 | ColumnceqfpUtilOutputTotalPktRate | read-only | current | This object represents the QFP output channel total packet rate during this interval, which includes both priority and non-priority output packet rate. |
| 1.3.6.1.4.1.9.9.715.1.1.6.1.13 | ColumnceqfpUtilOutputTotalBitRate | read-only | current | This object represents the QFP output channel total bit rate during this interval, which includes both priority and non-priority bit rate. |
| 1.3.6.1.4.1.9.9.715.1.1.6.1.14 | ColumnceqfpUtilProcessingLoad | read-only | current | This object represents the QFP processing load during this interval. |
| 1.3.6.1.4.1.9.9.715.1.1.7 | TableceqfpMemoryResourceTable | not-accessible | current | This table maintains the memory resources statistics for each QFP physical entity. An agent creates a conceptual row to this table corresponding to a QFP physi… |
| 1.3.6.1.4.1.9.9.715.1.1.7.1 | RowceqfpMemoryResourceEntry | not-accessible | current | A conceptual row in the ceqfpMemoryResourceTable. There is an entry in this table for each QFP entity by a value of entPhysicalIndex and the supported memory r… |
| 1.3.6.1.4.1.9.9.715.1.1.7.1.1 | ColumnceqfpMemoryResType | not-accessible | current | This object indicates the type of the memory resource used by the QFP. This object is one of the indices to uniquely identify the QFP memory resource type. |
| 1.3.6.1.4.1.9.9.715.1.1.7.1.2 | ColumnceqfpMemoryResTotal | read-only | current | This object represents total memory available on this memory resource. |
| 1.3.6.1.4.1.9.9.715.1.1.7.1.3 | ColumnceqfpMemoryResInUse | read-only | current | This object represents the memory which is currently under use on this memory resource. |
| 1.3.6.1.4.1.9.9.715.1.1.7.1.4 | ColumnceqfpMemoryResFree | read-only | current | This object represents the memory which is currently free on this memory resource. |
| 1.3.6.1.4.1.9.9.715.1.1.7.1.5 | ColumnceqfpMemoryResLowFreeWatermark | read-only | current | This object represents lowest free water mark on this memory resource. |
| 1.3.6.1.4.1.9.9.715.1.1.7.1.6 | ColumnceqfpMemoryResRisingThreshold | read-write | current | This object represents the rising threshold value for this memory resource. A value of zero means that the rising threshold is not supported for this memory re… |
| 1.3.6.1.4.1.9.9.715.1.1.7.1.7 | ColumnceqfpMemoryResFallingThreshold | read-write | current | This object represents the falling threshold value for this memory resource. A value of zero means that the falling threshold is not supported for this memory … |
| 1.3.6.1.4.1.9.9.715.1.1.7.1.8 | ColumnceqfpMemoryResTotalOvrflw | read-only | current | This object represents the upper 32-bit of ceqfpMemoryResTotal. This object needs to be supported only when the value of ceqfpMemoryResTotal exceeds 32-bit, ot… |
| 1.3.6.1.4.1.9.9.715.1.1.7.1.9 | ColumnceqfpMemoryHCResTotal | read-only | current | This object is a 64-bit version of ceqfpMemoryResTotal. |
| 1.3.6.1.4.1.9.9.715.1.1.7.1.10 | ColumnceqfpMemoryResInUseOvrflw | read-only | current | This object represents the upper 32-bit of ceqfpMemoryResInUse. This object needs to be supported only when the value of ceqfpMemoryResInUse exceeds 32-bit, ot… |
| 1.3.6.1.4.1.9.9.715.1.1.7.1.11 | ColumnceqfpMemoryHCResInUse | read-only | current | This object is a 64-bit version of ceqfpMemoryInRes. |
| 1.3.6.1.4.1.9.9.715.1.1.7.1.12 | ColumnceqfpMemoryResFreeOvrflw | read-only | current | This object represents the upper 32-bit of ceqfpMemoryResFree. This object needs to be supported only when the value of ceqfpMemoryResFree exceeds 32-bit, othe… |
| 1.3.6.1.4.1.9.9.715.1.1.7.1.13 | ColumnceqfpMemoryHCResFree | read-only | current | This object is a 64-bit version of ceqfpMemoryResFree. |
| 1.3.6.1.4.1.9.9.715.1.1.7.1.14 | ColumnceqfpMemoryResLowFreeWatermarkOvrflw | read-only | current | This object represents the upper 32-bit of ceqfpMemoryResLowFreeWatermark. This object needs to be supported only when the value of ceqfpMemoryResLowFreeWaterm… |
| 1.3.6.1.4.1.9.9.715.1.1.7.1.15 | ColumnceqfpMemoryHCResLowFreeWatermark | read-only | current | This object is a 64-bit version of ceqfpMemoryResLowFreeWatermark. |
| 1.3.6.1.4.1.9.9.715.1.1.8 | TableceqfpThroughputTable | not-accessible | current | This table maintains the throughput information for each QFP physical entity. An agent creates a conceptual row to this table corresponding to a QFP physical e… |
| 1.3.6.1.4.1.9.9.715.1.1.8.1 | RowceqfpThroughputEntry | not-accessible | current | A conceptual row in the ceqfpThroughputTable. There is an entry in this table for each QFP entity, as defined by a value of entPhysicalIndex. |
| 1.3.6.1.4.1.9.9.715.1.1.8.1.1 | ColumnceqfpThroughputLicensedBW | read-only | current | This object represents the bandwidth for installed throughput license. |
| 1.3.6.1.4.1.9.9.715.1.1.8.1.2 | ColumnceqfpThroughputLevel | read-only | current | This object represents the current throughput level for installed throughput license. normal (1) - Throughput usage is normal warning (2) - Throughput usage ha… |
| 1.3.6.1.4.1.9.9.715.1.1.8.1.3 | ColumnceqfpThroughputInterval | read-write | current | The object represents the configured time interval at which the ceqfpThroughputLevel is checked. |
| 1.3.6.1.4.1.9.9.715.1.1.8.1.4 | ColumnceqfpThroughputThreshold | read-write | current | The object represents the configured throughput threshold. |
| 1.3.6.1.4.1.9.9.715.1.1.8.1.5 | ColumnceqfpThroughputAvgRate | read-only | current | The object represents the average throughput rate in the interval ceqfpThroughputInterval. |
| 1.3.6.1.4.1.9.9.715.1.2 | NodeciscoEntityQfpNotif | |||
| 1.3.6.1.4.1.9.9.715.1.2.1 | ScalarceqfpMemoryResThreshNotifEnabled | read-write | current | This object controls memory resource rising and falling threshold notification. When this object contains a value 'true', then generation of memory resource th… |
| 1.3.6.1.4.1.9.9.715.1.2.2 | ScalarceqfpMemoryResCurrentRisingThresh | accessible-for-notify | current | This object represents the current rising threshold value, which triggers the rising threshold notification (ceqfpMemoryResRisingThreshNotif). |
| 1.3.6.1.4.1.9.9.715.1.2.3 | ScalarceqfpMemoryResCurrentFallingThresh | accessible-for-notify | current | This object represents the current falling threshold value, which triggers the falling threshold notification (ceqfpMemoryResFallingThreshNotif). |
| 1.3.6.1.4.1.9.9.715.1.2.4 | ScalarceqfpThroughputNotifEnabled | read-write | current | This object controls throughput rate notification. When this object contains a value 'true', then generation of ceqfpThroughputNotif is enabled. If this object… |
| 1.3.6.1.4.1.9.9.715.2 | NodeciscoEntityQfpMIBConform | |||
| 1.3.6.1.4.1.9.9.715.2.1 | NodeciscoEntityQfpMIBCompliances | |||
| 1.3.6.1.4.1.9.9.715.2.1.1 | ComplianceciscoEntityQfpMIBComplianceRev1 | read-only | deprecated | The compliance statement for CISCO-ENTITY-QFP-MIB |
| 1.3.6.1.4.1.9.9.715.2.1.2 | ComplianceciscoEntityQfpMIBComplianceRev2 | read-only | current | The compliance statement for CISCO-ENTITY-QFP-MIB. This compliance module deprecates ciscoEntityQfpMIBComplianceRev1. |
| 1.3.6.1.4.1.9.9.715.2.2 | NodeciscoEntityQfpMIBGroups | |||
| 1.3.6.1.4.1.9.9.715.2.2.1 | GroupciscoEntityQfpSystemGroup | current | This group contains collection of QFP system information. | |
| 1.3.6.1.4.1.9.9.715.2.2.2 | GroupciscoEntityQfpUtilizationAlgoGroup | current | This group contains collection of QFP utilization algorithm objects. | |
| 1.3.6.1.4.1.9.9.715.2.2.3 | GroupciscoEntityQfpUtilizationGroup | current | This group contains collection of QFP utilization information. | |
| 1.3.6.1.4.1.9.9.715.2.2.4 | GroupciscoEntityQfpMemoryResourceGroup | current | This group contains collection of QFP memory resource information. | |
| 1.3.6.1.4.1.9.9.715.2.2.5 | GroupciscoEntityQfpNotifGroup | current | This group contains collection of QFP notifications. | |
| 1.3.6.1.4.1.9.9.715.2.2.6 | GroupciscoEntityQfpMemoryResNotifGroup | current | This group contains memory resource notification control objects. | |
| 1.3.6.1.4.1.9.9.715.2.2.7 | GroupciscoEntityQfpMemoryResourceOvrflwGroup | current | This group contains collection of upper 32-bit QFP memory resource information. | |
| 1.3.6.1.4.1.9.9.715.2.2.8 | GroupciscoEntityQfpMemoryHCResourceGroup | current | This group contains collection of high capacity(HC) objects of QFP memory resource information. | |
| 1.3.6.1.4.1.9.9.715.2.2.9 | GroupceqfpThroughputGroup | current | This group contains collection of throughput rate information. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CiscoQfpBitRate | Counter64 | current | An estimate of throughput in units of bits per second. The CiscoQfpBitRate type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value o… |
| CiscoQfpMemoryResource | INTEGER { dram(1) } | current | An enumerated integer-value describing various memory resources used by the QFP. dram (1) - Dynamic Random Access Memory (DRAM) memory resource |
| CiscoQfpPacketRate | Counter64 | current | An estimate of throughput in units of packets per second. The CiscoQfpPacketRate type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum v… |
| CiscoQfpTimeInterval | INTEGER { fiveSeconds(1), oneMinute(2), fiveMinutes(3), sixtyMinutes(4) } | current | An enumerated integer-value describing the available interval values for which the periodic statistics are to be collected. fiveSeconds (1) - Interval to collect last 5 seconds statistics oneMinute(2) - Interval to coll… |