CISCO-ENTITY-REDUNDANCY-MIB
89 objects
This management information module supports configuration, control and monitoring of redundancy protection for various kinds of components on Cisco managed devices. It is meant to be generic enough to handle basic redundancy control and monitoring for many types of redundant member components and redundancy architectures as long as there is an Entity MIB entPhysicalIndex and entPhysicalVendorType assigned to each member component. It is designed so that the tables can be augmented in other extension MIBS which build upon this MIB by adding additional objects that may be specific to a particular type of redundancy or member component. This MIB can also be used in cases where some types of redundancy groups and members don't require explicit user configuration. One example may be redundant fan assemblies. In those cases, the managed system should internally assign group and member indexes, so that it can provide read-only access to the group and member tables. This allows MIB monitoring for these types of redundant entities.
Imported Objects
| CISCO-ENTITY-REDUNDANCY-TC-MIB | CeRedunArch CeRedunMbrStatus CeRedunMode CeRedunReasonCategories CeRedunScope CeRedunStateCategories CeRedunSwitchCommand CeRedunType |
| CISCO-SMI | ciscoMgmt |
| ENTITY-MIB | PhysicalIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | AutonomousType RowStatus StorageType TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.498 | IdentityciscoEntityRedunMIB | This management information module supports configuration, control and monitoring of redundancy protection for various kinds of components on Cisco managed dev… | ||
| 1.3.6.1.4.1.9.9.498.0 | NodeciscoEntityRedunMIBNotifs | |||
| 1.3.6.1.4.1.9.9.498.0.1 | NotificationceRedunEventSwitchover | current | A ceRedunEventSwitchover notification is sent when the ceRedunMbrProtectingMbr object changes value for a secondary member. The objects should correspond to th… | |
| 1.3.6.1.4.1.9.9.498.0.2 | NotificationceRedunProtectStatusChange | current | A ceRedunProtectStatusChange notification is sent when a protectionProvided bit gets set or cleared for an active member. This is intended to allow notificatio… | |
| 1.3.6.1.4.1.9.9.498.1 | NodeciscoEntityRedunMIBObjects | |||
| 1.3.6.1.4.1.9.9.498.1.1 | NodeceRedunGroup | |||
| 1.3.6.1.4.1.9.9.498.1.1.1 | TableceRedunGroupTypesTable | not-accessible | current | This table lists the basic types of redundancy groups supported on the managed device along with additional information about each group type. |
| 1.3.6.1.4.1.9.9.498.1.1.1.1 | RowceRedunGroupTypesEntry | not-accessible | current | A conceptual row in the ceRedunGroupTypesTable. |
| 1.3.6.1.4.1.9.9.498.1.1.1.1.1 | ColumnceRedunGroupTypeIndex | not-accessible | current | An index assigned for each type of redundancy group supported on a managed system that requires its own table listing entPhysicalVendorTypes allowed as members… |
| 1.3.6.1.4.1.9.9.498.1.1.1.1.2 | ColumnceRedunGroupTypeName | read-only | current | The textual name of the redundancy group type. The value of this object should be the name of the redundancy group type assigned by the local device as it woul… |
| 1.3.6.1.4.1.9.9.498.1.1.1.1.3 | ColumnceRedunGroupCounts | read-only | current | The current count of redundancy groups for a specific ceRedunGroupTypeIndex. This count indicates the number of rows in the ceRedunGroupTable for a specific ce… |
| 1.3.6.1.4.1.9.9.498.1.1.1.1.4 | ColumnceRedunNextUnusedGroupIndex | read-only | current | The next unused group index available for configuring a new redundancy group for this group type. In order to avoid unnecessary collisions between competing ma… |
| 1.3.6.1.4.1.9.9.498.1.1.1.1.5 | ColumnceRedunMaxMbrsInGroup | read-only | current | The maximum number of primary plus secondary members allowed in a group for a specific ceRedunGroupTypeIndex. If only 1:1 or 1+1 is supported, this should be 2… |
| 1.3.6.1.4.1.9.9.498.1.1.1.1.6 | ColumnceRedunUsesGroupName | read-only | current | Boolean to indicate whether this type of redundancy group uses the ceRedunGroupString object as a group name identifier. If it is reported as 'true', the ceRed… |
| 1.3.6.1.4.1.9.9.498.1.1.1.1.7 | ColumnceRedunGroupDefinitionChanged | read-only | current | The value of sysUpTime when there was the most recent change to any objects in the ceRedunGroupTypesTable except for ceRedunGroupCounts or ceRedunNextUnusedGro… |
| 1.3.6.1.4.1.9.9.498.1.1.2 | TableceRedunVendorTypesTable | not-accessible | current | This table lists all entPhysicalVendorTypes allowed as members for a specific ceRedunGroupTypeIndex on the managed device, inclusive for all configurable value… |
| 1.3.6.1.4.1.9.9.498.1.1.2.1 | RowceRedunVendorTypesEntry | not-accessible | current | A conceptual row in the ceRedunVendorTypesTable. |
| 1.3.6.1.4.1.9.9.498.1.1.2.1.1 | ColumnceRedunVendorType | read-only | current | Each row lists a specific entPhysicalVendorType which is allowed as a member for groups of the type specified by the ceRedunGroupTypeIndex. Note: Normally an i… |
| 1.3.6.1.4.1.9.9.498.1.1.3 | TableceRedunInternalStatesTable | not-accessible | current | This table allows the managed system to report a read-only list of internal state numbers and the corresponding descriptions which apply for the members of a p… |
| 1.3.6.1.4.1.9.9.498.1.1.3.1 | RowceRedunInternalStatesEntry | not-accessible | current | A conceptual row in the ceRedunInternalStatesTable. |
| 1.3.6.1.4.1.9.9.498.1.1.3.1.1 | ColumnceRedunInternalStateIndex | not-accessible | current | This is an index corresponding to an internal state of a member for a redundancy group of type ceRedunGroupTypeIndex. The state may include any of the initiali… |
| 1.3.6.1.4.1.9.9.498.1.1.3.1.2 | ColumnceRedunStateCategory | read-only | current | This places the specific internal state into one of several categories of internal states which are significant for redundancy. |
| 1.3.6.1.4.1.9.9.498.1.1.3.1.3 | ColumnceRedunInternalStateDescr | read-only | current | This is a string description for the specific internal member state. |
| 1.3.6.1.4.1.9.9.498.1.1.4 | TableceRedunSwitchoverReasonTable | not-accessible | current | This table allows the managed system to report a read-only list of switchover reason indexes and the corresponding descriptions. If the ceRedunGroupDefinitionC… |
| 1.3.6.1.4.1.9.9.498.1.1.4.1 | RowceRedunSwitchoverReasonEntry | not-accessible | current | A conceptual row in the ceRedunSwitchoverReasonTable. |
| 1.3.6.1.4.1.9.9.498.1.1.4.1.1 | ColumnceRedunSwitchoverReasonIndex | not-accessible | current | This is an index corresponding to a switchover reason code. |
| 1.3.6.1.4.1.9.9.498.1.1.4.1.2 | ColumnceRedunReasonCategory | read-only | current | This categorizes the specific switchover reason into one of several categories. |
| 1.3.6.1.4.1.9.9.498.1.1.4.1.3 | ColumnceRedunSwitchoverReasonDescr | read-only | current | This is a string description for the specific switchover reason. |
| 1.3.6.1.4.1.9.9.498.1.1.5 | ScalarceRedunGroupLastChanged | read-only | current | The value of sysUpTime corresponding to the last change for any object in the ceRedunGroupTable. The source of the change can be due to either an SNMP message … |
| 1.3.6.1.4.1.9.9.498.1.1.6 | TableceRedunGroupTable | not-accessible | current | This table lists group configuration and status objects for a specific redundancy group. However, the members are configured separately in the ceRedunMbrTable. |
| 1.3.6.1.4.1.9.9.498.1.1.6.1 | RowceRedunGroupEntry | not-accessible | current | A conceptual row in the ceRedunGroupTable. |
| 1.3.6.1.4.1.9.9.498.1.1.6.1.1 | ColumnceRedunGroupIndex | not-accessible | current | A group number assigned to a particular redundancy group. A group consists of one or more primary members which are protected by one or more secondary members. |
| 1.3.6.1.4.1.9.9.498.1.1.6.1.2 | ColumnceRedunGroupString | read-create | current | If ceRedunUsesGroupName is 'true' for this redundancy group type, this object is a group name identifier and the value of this object has to be specified and s… |
| 1.3.6.1.4.1.9.9.498.1.1.6.1.3 | ColumnceRedunGroupRedunType | read-create | current | The intended type of redundancy protection such as 'yCable' or 'aps' for this redundancy group. |
| 1.3.6.1.4.1.9.9.498.1.1.6.1.4 | ColumnceRedunGroupScope | read-create | current | This object determines the local/remote scope of the redundancy group. This object may not be modified if the associated ceRedunGroupRowStatus object is equal … |
| 1.3.6.1.4.1.9.9.498.1.1.6.1.5 | ColumnceRedunGroupArch | read-create | current | The architecture of the redundancy group, such as 1:1 or 1:n, etc. This object may not be modified if the associated ceRedunGroupRowStatus object is equal to a… |
| 1.3.6.1.4.1.9.9.498.1.1.6.1.6 | ColumnceRedunGroupRevert | read-create | current | The revertive mode of the redundancy group. nonrevertive(1) The secondary member remains active until another switchable event takes place. revertive(2) When t… |
| 1.3.6.1.4.1.9.9.498.1.1.6.1.7 | ColumnceRedunGroupWaitToRestore | read-create | current | The Wait To Restore period in seconds. This object is only applicable to groups which are configured as revertive and does not need to be instantiated for grou… |
| 1.3.6.1.4.1.9.9.498.1.1.6.1.8 | ColumnceRedunGroupDirection | read-create | current | This object is applicable only for those types of redundancy such as APS where switchovers can take place independently at near and far ends of a pair of inter… |
| 1.3.6.1.4.1.9.9.498.1.1.6.1.9 | ColumnceRedunGroupStorageType | read-create | current | The storage type for this conceptual row. By default, the row will not be saved into non-volatile memory unless this object is set to the value nonVolatile. No… |
| 1.3.6.1.4.1.9.9.498.1.1.6.1.10 | ColumnceRedunGroupRowStatus | read-create | current | The configuration status of this redundancy group entry. An entry may not exist in the active RowStatus state unless all configurable read-create objects in th… |
| 1.3.6.1.4.1.9.9.498.1.2 | NodeceRedunMembers | |||
| 1.3.6.1.4.1.9.9.498.1.2.1 | ScalarceRedunMbrLastChanged | read-only | current | The value of sysUpTime corresponding to the last change to any read-create objects in this table. The source of the change can be due to either an SNMP message… |
| 1.3.6.1.4.1.9.9.498.1.2.2 | TableceRedunMbrConfigTable | not-accessible | current | This table lists the group members and generic redundancy objects which are associated with configuring redundancy group members. The switchover granularity sh… |
| 1.3.6.1.4.1.9.9.498.1.2.2.1 | RowceRedunMbrConfigEntry | not-accessible | current | A conceptual row in the ceRedunMbrConfigTable. |
| 1.3.6.1.4.1.9.9.498.1.2.2.1.1 | ColumnceRedunMbrNumber | not-accessible | current | This field should be assigned as a unique member number within a redundancy group. The value 0 always indicates a secondary member. Primary members should have… |
| 1.3.6.1.4.1.9.9.498.1.2.2.1.2 | ColumnceRedunMbrPhysIndex | read-create | current | This field specifies the entity PhysicalIndex which is being configured as a redundancy member. It is the responsibility of the managed device to enforce any r… |
| 1.3.6.1.4.1.9.9.498.1.2.2.1.3 | ColumnceRedunMbrMode | read-create | current | This field is set to the 'primary' (working) or 'secondary' (protection) role within the redundancy group. The designation as 'primary' or 'secondary' is confi… |
| 1.3.6.1.4.1.9.9.498.1.2.2.1.4 | ColumnceRedunMbrAddressType | read-create | current | This field specifies the type of address used for the ceRedunMbrAddress object. It does not need to be instantiated when the ceRedunGroupScope value is 'remote… |
| 1.3.6.1.4.1.9.9.498.1.2.2.1.5 | ColumnceRedunMbrRemoteAddress | read-create | current | This field specifies the remote management address of the shelf or system where the peer member is expected to be configured. It does not need to be instantiat… |
| 1.3.6.1.4.1.9.9.498.1.2.2.1.6 | ColumnceRedunMbrPriority | read-create | current | The priority of the member. For 1:n architectures if the secondary member has already become active for a primary member with a lower priority, it can instead … |
| 1.3.6.1.4.1.9.9.498.1.2.2.1.8 | ColumnceRedunMbrStorageType | read-create | current | The storage type for this conceptual row. By default, the row will not be saved into non-volatile memory unless this object is set to the value nonVolatile. No… |
| 1.3.6.1.4.1.9.9.498.1.2.2.1.9 | ColumnceRedunMbrRowStatus | read-create | current | The configuration status of this member entry. A row in the ceRedunMbrConfigTable may not be created, deleted, or set to notInService if the associated ceRedun… |
| 1.3.6.1.4.1.9.9.498.1.2.3 | ScalarceRedunMbrStatusLastChanged | read-only | current | The value of sysUpTime corresponding to the last change to any objects in the ceRedunMbrStatusTable table. If there has been no change since the last time the … |
| 1.3.6.1.4.1.9.9.498.1.2.4 | TableceRedunMbrStatusTable | not-accessible | current | This table lists the redundancy status and other read-only redundancy objects which are associated with redundancy group members. Status associated with member… |
| 1.3.6.1.4.1.9.9.498.1.2.4.1 | RowceRedunMbrStatusEntry | not-accessible | current | A conceptual row in the ceRedunMbrStatusTable. |
| 1.3.6.1.4.1.9.9.498.1.2.4.1.1 | ColumnceRedunMbrStatusCurrent | read-only | current | Indicates the current status bitflags for the member. |
| 1.3.6.1.4.1.9.9.498.1.2.4.1.2 | ColumnceRedunMbrProtectingMbr | read-only | current | This field is valid only for a secondary member. When the secondary member is active, this value indicates the primary member it has taken over for. When the s… |
| 1.3.6.1.4.1.9.9.498.1.2.4.1.3 | ColumnceRedunMbrInternalState | read-only | current | This is the current internal state index for a member. The corresponding state category and description can be found in the ceRedunInternalStatesTable. It may … |
| 1.3.6.1.4.1.9.9.498.1.2.4.1.4 | ColumnceRedunMbrSwitchoverCounts | read-only | current | The number of times this primary or secondary member has changed from being active to being standby due to a switchover. The counter should monotonically incre… |
| 1.3.6.1.4.1.9.9.498.1.2.4.1.5 | ColumnceRedunMbrLastSwitchover | read-only | current | The value of sysUpTime when this primary member last completed a switchover to the secondary member. If this member has never switched to standby, or this is a… |
| 1.3.6.1.4.1.9.9.498.1.2.4.1.6 | ColumnceRedunMbrSwitchoverReason | read-only | current | The reported reason code for the last switchover. The corresponding reason category and description can be found from the ceRedunSwitchoverReasonTable. |
| 1.3.6.1.4.1.9.9.498.1.2.4.1.8 | ColumnceRedunMbrSwitchoverSeconds | read-only | current | The cumulative switching duration time in seconds. For a primary member, this is the cumulative number of seconds that service was carried by the secondary mem… |
| 1.3.6.1.4.1.9.9.498.1.3 | TableceRedunCommandTable | not-accessible | current | This table allows switchover commands to be sent to members of configured redundancy groups. |
| 1.3.6.1.4.1.9.9.498.1.3.1 | RowceRedunCommandEntry | not-accessible | current | A conceptual row in the ceRedunCommandTable. This row exists only if the associated ceRedunGroupEntry is active and has at least one primary and secondary memb… |
| 1.3.6.1.4.1.9.9.498.1.3.1.1 | ColumnceRedunCommandMbrNumber | read-write | current | Specifies the redundancy group member to which the switch command applies. The value -1 for this object is only valid for a clear command and indicates the cle… |
| 1.3.6.1.4.1.9.9.498.1.3.1.2 | ColumnceRedunCommandSwitch | read-write | current | Allows the initiation of a redundancy switchover command for the redundant member. When a valid member is specified, the command applies to the specified membe… |
| 1.3.6.1.4.1.9.9.498.1.4 | ScalarceRedunEnableSwitchoverNotifs | read-write | current | This object controls whether the system produces ceRedunEventSwitchover notifications. A false value will prevent ceRedunEventSwitchover notifications from bei… |
| 1.3.6.1.4.1.9.9.498.1.5 | ScalarceRedunEnableStatusChangeNotifs | read-write | current | This object controls whether the system produces ceRedunProtectStatusChange notifications. A false value will prevent ceRedunProtectStatusChange notifications … |
| 1.3.6.1.4.1.9.9.498.2 | NodeciscoEntityRedunMIBConform | |||
| 1.3.6.1.4.1.9.9.498.2.1 | NodeceRedunCompliances | |||
| 1.3.6.1.4.1.9.9.498.2.1.1 | ComplianceceRedunCompliance | read-only | current | The compliance statement for Cisco entity redundancy groups. |
| 1.3.6.1.4.1.9.9.498.2.2 | NodeceRedunGroups | |||
| 1.3.6.1.4.1.9.9.498.2.2.1 | GroupceRedunGroupTypeGroup | current | A collection of mandatory objects providing configuration information applicable to redundancy entity group types. | |
| 1.3.6.1.4.1.9.9.498.2.2.2 | GroupceRedunOptionalGroupTypes | current | A collection of optional objects from the ceRedunGroupTypesTable. | |
| 1.3.6.1.4.1.9.9.498.2.2.3 | GroupceRedunInternalStates | current | A collection of objects giving internal redundancy state information. | |
| 1.3.6.1.4.1.9.9.498.2.2.4 | GroupceRedunSwitchoverReason | current | A collection of objects giving switchover reason information. | |
| 1.3.6.1.4.1.9.9.498.2.2.5 | GroupceRedunGroupObjects | current | A collection of mandatory objects providing information applicable to redundancy entity groups. | |
| 1.3.6.1.4.1.9.9.498.2.2.6 | GroupceRedunRevertiveGroup | current | A collection of objects providing revertive switchover capability. | |
| 1.3.6.1.4.1.9.9.498.2.2.7 | GroupceRedunBidirectional | current | The objects which provide information which is applicable to groups supporting bi-directional operation. | |
| 1.3.6.1.4.1.9.9.498.2.2.8 | GroupceRedunMemberConfig | current | A collection of mandatory member objects providing configuration information applicable to all redundancy members. | |
| 1.3.6.1.4.1.9.9.498.2.2.9 | GroupceRedunRemoteSystem | current | The objects which provide information which is only applicable to 'remoteSystem' or 'remoteChassis' groups. | |
| 1.3.6.1.4.1.9.9.498.2.2.10 | GroupceRedunOneToN | current | The objects which provide information which is only applicable to groups implementing the 1:n architecture. | |
| 1.3.6.1.4.1.9.9.498.2.2.11 | GroupceRedunMemberStatus | current | A collection of mandatory ceRedunStatusTable objects providing status information applicable to redundancy members. | |
| 1.3.6.1.4.1.9.9.498.2.2.12 | GroupceRedunOptionalMbrStatus | current | A collection of objects providing additional member status. | |
| 1.3.6.1.4.1.9.9.498.2.2.13 | GroupceRedunCommandsGroup | current | A collection of objects providing commanded switchover capability. | |
| 1.3.6.1.4.1.9.9.498.2.2.14 | GroupceRedunNotifEnables | current | A collection of objects providing configuration information applicable to all redundancy entity groups. | |
| 1.3.6.1.4.1.9.9.498.2.2.15 | GroupceRedunSwitchNotifGroup | current | A collection of entity redundancy notifications that may optionally be implemented. | |
| 1.3.6.1.4.1.9.9.498.2.2.16 | GroupceRedunProtectStatusNotifGroup | current | A collection of entity redundancy notifications that may optionally be implemented. |