CISCO-FASTHUB-MIB
84 objects
No module-level DESCRIPTION found.
Imported Objects
| CISCO-SMI | local |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter IpAddress TimeTicks |
| RFC1213-MIB | DisplayString sysName |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.2.11 | NodeciscoFastHubMIB | |||
| 1.3.6.1.4.1.9.2.11.1 | NodeciscoFastHubMIBObjects | |||
| 1.3.6.1.4.1.9.2.11.1.0 | NodelogonIntruder | A user is repeatedly trying to log on to the Management Console using an invalid password. The number of attempts exceeds the preset limit given in mrNetMgmtCo… | ||
| 1.3.6.1.4.1.9.2.11.1.1 | NodehubStackDiagnostic | FastHub issues this trap when its Power On Self Test (POST) code does not pass all tests. Some failures are catastrophic and may prevent the generation of this… | ||
| 1.3.6.1.4.1.9.2.11.1.1 | NodemrStack | |||
| 1.3.6.1.4.1.9.2.11.1.1.1 | ScalarmrStackUnitCapacity | read-only | mandatory | This object returns the maximum number of repeater units that can be stacked in the system and managed as one repeater. |
| 1.3.6.1.4.1.9.2.11.1.1.2 | ScalarmrStackNumberOfUnitsPresent | read-only | mandatory | This object returns the current number of repeater units in the stack. |
| 1.3.6.1.4.1.9.2.11.1.1.3 | ScalarmrStackSelectPrimarySupervisorUnit | read-write | mandatory | In a multi-unit FastHub stack with more than one Supervisor management module installed, this object selects which unit and hence, which Supervisor module, sho… |
| 1.3.6.1.4.1.9.2.11.1.1.4 | ScalarmrStackPOSTSelect | read-write | mandatory | normal(1), abbreviated(2) This object configures the type of Supervisor Power On Self Test FastHub will run upon power up. The normal(1) setting runs the lengt… |
| 1.3.6.1.4.1.9.2.11.1.1.5 | ScalarmrStackReset | read-write | mandatory | reset(1) noReset(2), A write to this object with reset(1) causes a complete reset of the repeater hardware and the Supervisor but does not run the POST. All Fa… |
| 1.3.6.1.4.1.9.2.11.1.1.6 | ScalarmrStackDefaultReset | read-write | mandatory | reset(1) noReset(2), A write to this object with reset(1) causes a complete reset of the repeater hardware and the Supervisor but does not run the POST. All Fa… |
| 1.3.6.1.4.1.9.2.11.1.1.7 | ScalarmrStackClearStatistics | read-write | obsolete | clear(1) noClear(2), A write to this object with noClear(2) results in no action. A write of clear(1) will cause FastHub to reset all repeater statistics to ze… |
| 1.3.6.1.4.1.9.2.11.1.1.8 | ScalarmrStackShortJabberLoopCorrections | read-only | mandatory | |
| 1.3.6.1.4.1.9.2.11.1.2 | NodemrSupervisorLog | |||
| 1.3.6.1.4.1.9.2.11.1.2 | NoderpsFailed | A redundant power source is connected to FastHub but a failure exists in the power system. | ||
| 1.3.6.1.4.1.9.2.11.1.2.1 | ScalarmrSupervisorLogTableClear | read-write | mandatory | clear(1) noClear(2), A write to this object with noClear(2) results in no action. A write of clear(1) will clear all current entries in the mrSupervisorLogTabl… |
| 1.3.6.1.4.1.9.2.11.1.2.2 | TablemrSupervisorLogTable | not-accessible | mandatory | The mrSupervisorLogTable provides read access to the Supervisor log. Each table entry, identified by a unique index, holds one DisplayString object containing … |
| 1.3.6.1.4.1.9.2.11.1.2.2.1 | RowmrSupervisorLogEntry | not-accessible | mandatory | Supervisor Log entry. |
| 1.3.6.1.4.1.9.2.11.1.2.2.1.1 | ColumnmrSupervisorLogIndex | read-only | mandatory | A value identifying a unique entry in the mrSupervisorLogTable. |
| 1.3.6.1.4.1.9.2.11.1.2.2.1.2 | ColumnmrSupervisorLogTime | read-only | obsolete | Text string containing the date and time this log entry was created. |
| 1.3.6.1.4.1.9.2.11.1.2.2.1.3 | ColumnmrSupervisorLogInfo | read-only | mandatory | A free formatted display string containing some descriptive text about a certain system state change. |
| 1.3.6.1.4.1.9.2.11.1.2.2.1.4 | ColumnmrSupervisorLogRelativeTime | read-only | mandatory | The value of sysUpTime when this log entry was created. A value of 0 indicates that the entry was logged before the last reset. |
| 1.3.6.1.4.1.9.2.11.1.3 | NodeipAddressChange | The ipAddressChange trap is issued when the FastHub Supervisor is unable to complete its DHCPDISCOVER/ DHCPREQUEST process, or when it fails to extend the leas… | ||
| 1.3.6.1.4.1.9.2.11.1.3 | NodemrStackUnit | |||
| 1.3.6.1.4.1.9.2.11.1.3.1 | TablemrStackUnitTable | not-accessible | mandatory | The mrStackUnitTable provides configuration information about hot-insertable enclosures. Each table entry, identified by a unique index, describes one such enc… |
| 1.3.6.1.4.1.9.2.11.1.3.1.1 | RowmrStackUnitEntry | not-accessible | mandatory | Stack unit table entry. |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.1 | ColumnmrStackUnitIndex | read-only | mandatory | A number identifying a unique FastHub unit. This number corresponds to the physical box unit number in the stack. |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.2 | ColumnmrStackUnitPresent | read-only | mandatory | This object contains true(1) if the unit identified by mrStackUnitIndex is present in the stack. The object contains false(2) otherwise. Default value: false(2… |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.3 | ColumnmrStackUnitFirstGroupIndex | read-only | mandatory | This object contains a value which corresponds to an RFC-1516 group index. It identifies the first of the one or more repeater groups present in this unit. All… |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.4 | ColumnmrStackUnitLastGroupIndex | read-only | mandatory | This object contains a value which corresponds to an RFC-1516 group index. It identifies the last of the one or more repeater groups present in this unit. All … |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.5 | ColumnmrStackUnitSupervisorPresent | read-only | mandatory | This object contains true(1) if a Supervisor module is installed in the unit. The object contains false(2) otherwise. Default value: false(2). |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.6 | ColumnmrStackUnitSupervisorMajorVersion | read-only | mandatory | If a Supervisor module is installed in the unit, this object returns its major firmware version number. This object contains 0 if the unit does not have a Supe… |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.7 | ColumnmrStackUnitSupervisorMinorVersion | read-only | mandatory | If a Supervisor module is installed in the unit, this object returns its minor firmware version number. This object contains 0 if the unit does not have a Supe… |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.8 | ColumnmrStackUnitSupervisorBootstrapMajorVersion | read-only | mandatory | If a Supervisor module is installed in the unit, this object returns its major bootstrap version number. This object contains 0 if the unit does not have a Sup… |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.9 | ColumnmrStackUnitSupervisorBootstrapMinorVersion | read-only | mandatory | If a Supervisor module is installed in the unit, this object returns its minor bootstrap version number. This object contains 0 if the unit does not have a Sup… |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.10 | ColumnmrStackUnitPOSTResult | read-only | mandatory | A bit array where the presence of a particular bit indicates a failure of a particular Power On Self Test (POST). Each octet within the value of this object sp… |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.11 | ColumnmrStackUnitSupervisorIsPrimary | read-only | mandatory | true(1), false(2) If the current unit has a management module installed (mrStackUnitSupervisorPresent is true), this object indicates whether the module is act… |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.12 | ColumnmrStackUnitExpansionModulePresent | read-only | mandatory | This object contains true(1) if an expansion module is installed in the unit. The object contains false(2) otherwise. Default value: false(2). |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.13 | ColumnmrStackUnitPortVisualIndicatorSelect | read-only | mandatory | portStatus(1), unitNumber(2), utilization(3) This object reflects what is currently selected as the port visual indication mode. The portStatus(1) mode uses th… |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.14 | ColumnmrStackUnitBasePortVisualIndicatorGreenMap | read-only | mandatory | The current value of the green visual LED map, representing link or activity, for ports on the unit's main board. Default value: string of length 0. |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.15 | ColumnmrStackUnitBasePortVisualIndicatorAmberMap | read-only | mandatory | The current value of the amber visual LED map, representing disabled status, for ports on the unit's main board. Default value: string of length 0. |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.16 | ColumnmrStackUnitExpansionPortVisualIndicatorGreenMap | read-only | mandatory | The current value of the green visual LED map, representing link or activity, for ports on the unit's expansion module. Default value: string of length 0. |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.17 | ColumnmrStackUnitExpansionPortVisualIndicatorAmberMap | read-only | mandatory | The current value of the amber visual LED map, representing disabled status, for ports on the unit's expansion module. Default value: string of length 0. |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.18 | ColumnmrStackUnitActivityVisualIndicator | read-only | mandatory | This object has the value true(1) when the unit activity visual LED is lit. Otherwise, it has the value false(2). Initial value: false(2). |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.19 | ColumnmrStackUnitCollisionVisualIndicator | read-only | mandatory | This object has the value true(1) when the unit collision visual LED is lit. Otherwise, it has the value false(2). Initial value: false(2). |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.20 | ColumnmrStackUnitRPSStatus | read-only | mandatory | notPresent(1), connectedFunctional(2), supplying power conectedNotFunctional(3), functionalPrimaryFailed(4) This object shows the status of the remote redundan… |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.21 | ColumnmrStackUnitRPSVisualIndicator | read-only | mandatory | This object has one of the following values: off(1), green(2), amber(3) Initial value: off(1). |
| 1.3.6.1.4.1.9.2.11.1.3.1.1.22 | ColumnmrStackUnitSerialNumber | read-only | mandatory | This object has the serial number of the unit. |
| 1.3.6.1.4.1.9.2.11.1.4 | NodemrNetMgmt | |||
| 1.3.6.1.4.1.9.2.11.1.4.1 | ScalarmrNetMgmtIpAddress | read-write | mandatory | The FastHub Supervisor IP address. FastHub may automatically discover a value for this object using BOOTP, or DHCP. The object value is also duplicated in the … |
| 1.3.6.1.4.1.9.2.11.1.4.2 | ScalarmrNetMgmtIpSubnetMask | read-write | mandatory | The FastHub Supervisor IP subnet mask. The firmware may automatically discover a value for this object using BOOTP, DHCP or RARP. The object value is also dupl… |
| 1.3.6.1.4.1.9.2.11.1.4.3 | ScalarmrNetMgmtDefaultGateway | read-write | mandatory | The IP address of a default gateway. A write to this object will take effect immediately, replacing the previous address, if any. Default value: 0.0.0.0, or no… |
| 1.3.6.1.4.1.9.2.11.1.4.4 | ScalarmrNetMgmtEnableAuthenTraps | read-write | mandatory | enabled(1), disabled(2) Indicates whether the SNMP Agent is allowed to generate authenticationFailure traps. The value of this object overrides any configurati… |
| 1.3.6.1.4.1.9.2.11.1.4.6 | ScalarmrNetMgmtEnableRIP | read-write | mandatory | enabled(1), disabled(2) This object controls whether the FastHub Supervisor will run the Routing Information Protocol listener to automatically discover IP gat… |
| 1.3.6.1.4.1.9.2.11.1.4.7 | ScalarmrNetMgmtConsoleInactTime | read-write | mandatory | The number of seconds (minimum of 30) of Management Console session inactivity to wait before ending the session. Once a session has ended, the user must resup… |
| 1.3.6.1.4.1.9.2.11.1.4.8 | ScalarmrNetMgmtConsolePasswordThreshold | read-write | mandatory | The number of consecutive invalid password attempts allowed before the Management Console is shut down for a configured duration. A zero value permits unlimite… |
| 1.3.6.1.4.1.9.2.11.1.4.9 | ScalarmrNetMgmtConsoleSilentTime | read-write | mandatory | The number of minutes during which the Management Console will be unavailable after repeated failed attempts to log on. A zero value specifies no silent time. … |
| 1.3.6.1.4.1.9.2.11.1.4.10 | ScalarmrNetMgmtModemInitString | read-write | mandatory | A string of up to 48 characters used to configured a modem connected to the RS-232 port. Specify this string if the modem is not Hayes compatible. Only the ini… |
| 1.3.6.1.4.1.9.2.11.1.4.11 | ScalarmrNetMgmtModemDialString | read-write | mandatory | This string of up to 48 characters contains a phone number used to establish a modem connection with a remote site. Only the phone number needs be specified (i… |
| 1.3.6.1.4.1.9.2.11.1.4.12 | ScalarmrNetMgmtModemDialDelay | read-write | mandatory | Specifies a delay in seconds between every dial-out failure. The value zero indicates an infinite delay (no retry after the first failure). Normally, FastHub w… |
| 1.3.6.1.4.1.9.2.11.1.4.13 | ScalarmrNetMgmtModemAutoAnswer | read-write | mandatory | Specifies whether the system should be in auto-answer mode and only accepts incoming calls. Note that the system will always attempt a dial-out first if mrNetM… |
| 1.3.6.1.4.1.9.2.11.1.4.14 | ScalarmrNetMgmtDomainServer1IpAddress | read-write | mandatory | The IP address of a Domain Name Server (DNS) which FastHub uses to resolve domain names to IP addresses. A set on this object takes effect the next time FastHu… |
| 1.3.6.1.4.1.9.2.11.1.4.15 | ScalarmrNetMgmtDomainServer2IpAddress | read-write | mandatory | The IP address of a second Domain Name Server (DNS) which FastHub uses to resolve domain names to IP addresses. A set on this object takes effect the next time… |
| 1.3.6.1.4.1.9.2.11.1.4.16 | ScalarmrNetMgmtDefaultSearchDomain | read-write | mandatory | A string of up to 63 characters specifying a default domain search path. When FastHub needs to resolve a domain name that is not fully specified, it appends th… |
| 1.3.6.1.4.1.9.2.11.1.4.17 | TablemrNetMgmtSetClientTable | not-accessible | mandatory | Table (4 entries) containing a list of names/IP addresses of workstations permitted to issue SET requests. Such a workstation is called a Set client. If this t… |
| 1.3.6.1.4.1.9.2.11.1.4.17.1 | RowmrNetMgmtSetClientEntry | not-accessible | mandatory | A name/IP address of a manager station allowed to issue SET requests to this management agent. |
| 1.3.6.1.4.1.9.2.11.1.4.17.1.1 | ColumnmrNetMgmtSetClientIndex | read-only | mandatory | Identifier of a particular table entry. |
| 1.3.6.1.4.1.9.2.11.1.4.17.1.2 | ColumnmrNetMgmtSetClientName | read-write | mandatory | The Set Client's name or IP address. Default value: string of length 0. |
| 1.3.6.1.4.1.9.2.11.1.4.17.1.3 | ColumnmrNetMgmtSetClientStatus | read-write | mandatory | other(1) invalid(2) permanent(3) Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry. That is, it effectively di… |
| 1.3.6.1.4.1.9.2.11.1.4.18 | TablemrNetMgmtTrapClientTable | not-accessible | mandatory | Table (4 entries) containing a list of Network Management Stations that are to receive traps generated by this Network Management Agent. Such an NMS is called … |
| 1.3.6.1.4.1.9.2.11.1.4.18.1 | RowmrNetMgmtTrapClientEntry | not-accessible | mandatory | A destination address and community string to a particular trap client. |
| 1.3.6.1.4.1.9.2.11.1.4.18.1.1 | ColumnmrNetMgmtTrapClientIndex | read-only | mandatory | Identifier of a particular table entry. |
| 1.3.6.1.4.1.9.2.11.1.4.18.1.2 | ColumnmrNetMgmtTrapClientName | read-write | mandatory | The Trap Client's name or IP address. Default value: string of length 0. |
| 1.3.6.1.4.1.9.2.11.1.4.18.1.3 | ColumnmrNetMgmtTrapClientComm | read-write | mandatory | The community string (up to 32 characters) used for traps sent to this Trap Client. Default value: string of length 0. |
| 1.3.6.1.4.1.9.2.11.1.4.18.1.4 | ColumnmrNetMgmtTrapClientStatus | read-write | mandatory | other(1) invalid(2) permanent(3) Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry. That is, it effectively di… |
| 1.3.6.1.4.1.9.2.11.1.5 | NodemrUpgrade | |||
| 1.3.6.1.4.1.9.2.11.1.5.1 | ScalarmrUpgradeFlashSize | read-only | mandatory | The size in kilobytes of FLASH memory installed in the system. For example: 128 equals 131072 bytes (128 times 1024 bytes). Default value: 1024 (one megabyte). |
| 1.3.6.1.4.1.9.2.11.1.5.2 | ScalarmrUpgradeLastUpgradeTime | read-only | obsolete | A string containing the date and time of the last upgrade of the primary Supervisor firmware. The string is in net ASCII and conforms exactly to one of the fol… |
| 1.3.6.1.4.1.9.2.11.1.5.3 | ScalarmrUpgradeLastUpgradeSource | read-only | mandatory | The name or IP address of the TFTP node which last sent a Supervisor firmware image to upgrade the FLASH memory contents. If the last upgrade was from the RS-2… |
| 1.3.6.1.4.1.9.2.11.1.5.4 | ScalarmrUpgradeLastUpgradeStatus | read-only | mandatory | Indicates the status of the last upgrade. The object can have one of the following values: none(1), inProgress(2), success(3), failure(4) Default value: none(1… |
| 1.3.6.1.4.1.9.2.11.1.5.5 | ScalarmrUpgradeTFTPServerAddress | read-write | mandatory | This object names the TFTP server from which a firmware file can be downloaded using the built-in TFTP protocol. This is the in-band system-directed upgrade me… |
| 1.3.6.1.4.1.9.2.11.1.5.6 | ScalarmrUpgradeTFTPLoadFilename | read-write | mandatory | The name of the file containing a firmware upgrade image on the host whose address is given by mrUpgradeTFTPServerAddress. Default value: string of length 0. |
| 1.3.6.1.4.1.9.2.11.1.5.7 | ScalarmrUpgradeTFTPInitiate | read-write | mandatory | upgrade(1), noUpgrade(2) Setting this object to noUpgrade(2) results in no action. When set to upgrade(1), FastHub will attempt to download a firmware file who… |
| 1.3.6.1.4.1.9.2.11.1.5.8 | ScalarmrUpgradeTFTPAccept | read-write | mandatory | enabled(1), disabled(2) When set to disabled(2), FastHub will refuse TFTP write requests from workstations. When enabled(1), a user at a workstations may send … |