CISCO-FCOE-MIB
45 objects
This MIB module is for configuring and monitoring Fibre Channel over Ethernet (FCoE) related entities. This MIB defines the Virtual FC (VFC) Interface as an object that represents either a VF_Port or a VE_Port on the FCF. Virtual FC interfaces can be either statically created or dynamically created at the time of FIP based FLOGI or ELP request. In this document the term VSAN ID is used interchangeably with Fabric Index defined in the T11 standards. Terminologies used in this MIB are defined by the T11 FCoE standard. Refer to www.t11.org. This MIB also supports configuration of the following objects: - Mapping of FCoE VLAN ID used to carry traffic for a VSAN ID - FC-MAP value used by the FCF operating in FPMA mode - FIP snooping related objects
Imported Objects
| CISCO-SMI | ciscoMgmt |
| FC-MGMT-MIB | fcmInstanceIndex fcmSwitchIndex |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| Q-BRIDGE-MIB | VlanIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| T11-TC-MIB | T11FabricIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.673 | IdentityciscoFCoEMIB | This MIB module is for configuring and monitoring Fibre Channel over Ethernet (FCoE) related entities. This MIB defines the Virtual FC (VFC) Interface as an ob… | ||
| 1.3.6.1.4.1.9.9.673.1 | NodeciscoFCoEMIBObjects | |||
| 1.3.6.1.4.1.9.9.673.1.1 | NodecfcoeConfig | |||
| 1.3.6.1.4.1.9.9.673.1.1.1 | TablecfcoeCfgTable | not-accessible | current | This table facilitates configuration of FCoE parameters on a per Fibre Channel management instance. |
| 1.3.6.1.4.1.9.9.673.1.1.1.1 | RowcfcoeCfgEntry | not-accessible | current | There is one entry in this table for each Fibre Channel management instance. |
| 1.3.6.1.4.1.9.9.673.1.1.1.1.1 | ColumncfcoeCfgFcmap | read-write | current | This object configures the FC-MAP value used by the FCF when operating in FPMA mode. The default value is 0EFC00h, as written in the standard. |
| 1.3.6.1.4.1.9.9.673.1.1.1.1.2 | ColumncfcoeCfgDynamicVfcCreation | read-write | current | This object allows the user to enable (TRUE) or disable (FALSE) dynamic VFC interface creation on the FCF. When set to TRUE VFC interfaces are dynamically crea… |
| 1.3.6.1.4.1.9.9.673.1.1.1.1.3 | ColumncfcoeCfgDynamicVfcAgeTimer | read-write | current | This ageing timer (in seconds) is used by the FCF to age out dynamically created VFC interfaces. The default value is 300 seconds. |
| 1.3.6.1.4.1.9.9.673.1.1.1.1.4 | ColumncfcoeCfgDefaultFCFPriority | read-write | current | The FIP priority value advertised by the FCF to ENodes by default. cfcoeStaticVfcFCFPriority configured for a VFC interface overrides this setting for the ENod… |
| 1.3.6.1.4.1.9.9.673.1.1.1.1.5 | ColumncfcoeCfgDATov | read-write | current | The Discovery_Advertisement_Timeout value configured for the FCF. This is used as the timeout value in seconds by the FCF to send periodic Discovery Advertisem… |
| 1.3.6.1.4.1.9.9.673.1.1.1.1.6 | ColumncfcoeCfgAddressingMode | read-write | current | Addressing mode(s) supported by the FCF. Implementations should fail set requests for unsupported modes. |
| 1.3.6.1.4.1.9.9.673.1.1.2 | TablecfcoeVLANTable | not-accessible | current | This table facilitates configuration of VLAN and Fabric (VSAN) associations in an FCoE network. FCoE forwarding for a fabric is over a VLAN in a L2 Ethernet ne… |
| 1.3.6.1.4.1.9.9.673.1.1.2.1 | RowcfcoeVLANEntry | not-accessible | current | There is one entry in this table for each VLAN that is designated to transport FCoE traffic for a given fabric (VSAN). |
| 1.3.6.1.4.1.9.9.673.1.1.2.1.1 | ColumncfcoeVLANIndex | not-accessible | current | This object identifies the VLAN ID that FCoE FCF function is being enabled for. |
| 1.3.6.1.4.1.9.9.673.1.1.2.1.2 | ColumncfcoeFabricIndex | not-accessible | current | This object identifies the Fabric Index of the VSAN traffic for which can be transported over the VLAN identified by cfcoeVLANIndex. |
| 1.3.6.1.4.1.9.9.673.1.1.2.1.3 | ColumncfcoeVLANOperState | read-only | current | Operational state of this VLAN-VSAN association entry. The 'up' state is achieved when both the VSAN and VLAN are valid. |
| 1.3.6.1.4.1.9.9.673.1.1.2.1.4 | ColumncfcoeVLANRowStatus | read-create | current | The status of this conceptual row. The RowStatus becomes active on successful creation of an entry. |
| 1.3.6.1.4.1.9.9.673.1.1.3 | TablecfcoeStaticVfcTable | not-accessible | current | This table facilitates the creation and deletion of static VFC interfaces. While VFCs can be dynamically created based on FIP FLOGI/ELP requests users may want… |
| 1.3.6.1.4.1.9.9.673.1.1.3.1 | RowcfcoeStaticVfcEntry | not-accessible | current | There is one entry in this table for each statically created VFC Interface. |
| 1.3.6.1.4.1.9.9.673.1.1.3.1.1 | ColumncfcoeStaticVfcIndex | not-accessible | current | This index uniquely identifies a static VFC entry in this table. |
| 1.3.6.1.4.1.9.9.673.1.1.3.1.2 | ColumncfcoeStaticVfcFCFPriority | read-create | current | If this VFC is for a VF_Port this object is used to configure FCF priority to be advertised to the ENode associated with the VFC. |
| 1.3.6.1.4.1.9.9.673.1.1.3.1.3 | ColumncfcoeStaticVfcBindType | read-create | current | The mechanism to identify the ENode associated with this VFC if it is of type VF_Port or to identify the remote-FCF associated with this VFC if it is of type V… |
| 1.3.6.1.4.1.9.9.673.1.1.3.1.4 | ColumncfcoeStaticVfcBindIfIndex | read-create | current | This object allows for configuration of ifIndex of the ethernet interface over which the FCF reaches the ENode or the remote-FCF that this VFC identifies. This… |
| 1.3.6.1.4.1.9.9.673.1.1.3.1.5 | ColumncfcoeStaticVfcBindMACAddress | read-create | current | This object allows the user to configure MAC address of the ENode or the remote-FCF that this VFC interface identifies. An ENode or remote-FCF is associated to… |
| 1.3.6.1.4.1.9.9.673.1.1.3.1.6 | ColumncfcoeStaticVfcIfIndex | read-only | current | The ifIndex of this virtual FC interface. |
| 1.3.6.1.4.1.9.9.673.1.1.3.1.7 | ColumncfcoeStaticVfcCreationTime | read-only | current | The timestamp of this entry's creation time. |
| 1.3.6.1.4.1.9.9.673.1.1.3.1.8 | ColumncfcoeStaticVfcFailureCause | read-only | current | The cause of failure for the last bind operation. This object will be zero length if and only if the bind is successful. |
| 1.3.6.1.4.1.9.9.673.1.1.3.1.9 | ColumncfcoeStaticVfcRowStatus | read-create | current | The status of this conceptual row. The RowStatus becomes active on successful creation of a virtual interface. The VFC must be bound before it can become opera… |
| 1.3.6.1.4.1.9.9.673.1.2 | NodecfcoeFipSnoopingObjects | |||
| 1.3.6.1.4.1.9.9.673.1.2.1 | ScalarcfcoeFipSnoopingEnable | read-write | current | This object is used to enable or disable FIP Snooping on an Ethernet Bridge. |
| 1.3.6.1.4.1.9.9.673.1.2.2 | ScalarcfcoeFipSnoopingFcmap | read-write | current | This object configures the FC-MAP value associated with the FIP snooping Ethernet bridge. |
| 1.3.6.1.4.1.9.9.673.1.2.3 | TablecfcoeEnodeIntfTable | not-accessible | current | The (conceptual) table containing the interfaces on an Ethernet bridge that are directly connected to ENodes. A FIP Snooping bridge will automatically configur… |
| 1.3.6.1.4.1.9.9.673.1.2.3.1 | RowcfcoeEnodeIntfEntry | not-accessible | current | An entry (conceptual row) in the cfcoeEnodeIntfTable, representing an interface directly connected to an ENode on the Ethernet Bridge. |
| 1.3.6.1.4.1.9.9.673.1.2.3.1.1 | ColumncfcoeEnodeIntfIfIndex | not-accessible | current | The ifIndex of the interface on the Ethernet bridge connected to an Enode. |
| 1.3.6.1.4.1.9.9.673.1.2.3.1.2 | ColumncfcoeEnodeIntfRowStatus | read-create | current | The status of this conceptual row. |
| 1.3.6.1.4.1.9.9.673.2 | NodeciscoFCoEMIBConformance | |||
| 1.3.6.1.4.1.9.9.673.2.1 | NodecFCoEMIBCompliances | |||
| 1.3.6.1.4.1.9.9.673.2.1.1 | CompliancecFCoEMIBCompliance | read-only | current | The compliance statement for entities which implement the CISCO-FCOE-MIB mib. |
| 1.3.6.1.4.1.9.9.673.2.2 | NodecFCoEMIBGroups | |||
| 1.3.6.1.4.1.9.9.673.2.2.1 | GroupcfcoeCfgConformanceObjects | current | A collection of objects related to all implementations of FCoE. | |
| 1.3.6.1.4.1.9.9.673.2.2.2 | GroupcfcoeVLANConformanceObjects | current | A collection of objects related to implementation of FCoE VLANs. | |
| 1.3.6.1.4.1.9.9.673.2.2.3 | GroupcfcoeStaticVfcConformanceObjects | current | A collection of objects related to implementation of static VFC interfaces. | |
| 1.3.6.1.4.1.9.9.673.2.2.4 | GroupcfcoeFipSnoopingConformanceObjects | current | A collection of objects related to implementation of FIP Snooping. | |
| 1.3.6.1.4.1.9.9.673.2.2.5 | GroupcfcoeEnodeIntfObjects | current | A collection of objects related to implementation of ENode interfaces on a FIP snooping bridge. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VfcBindType | INTEGER { interfaceIndex(1), macAddress(2) } | current | Defines the different methods to identify (or bind to) - the ENode associated with a particular VF_Port VFC - the remote-FCF associated with a particular VE_Port VFC interfaceIndex(1) - This type is used when the ifInde… |