CISCO-FLASH-MIB
167 objects
Added new object ciscoFlashDeviceChangeExtTrap Added new object ciscoFlashDeviceInsertedExtNotif Added new object ciscoFlashDeviceRemovedExtNotif to support flash devices of sizes greater than 4 GB
Imported Objects
| CISCO-QOS-PIB-MIB | Percent |
| CISCO-SMI | ciscoMgmt |
| ENTITY-MIB | PhysicalIndex |
| HCNUM-TC | CounterBasedGauge64 |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString InstancePointer RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.10 | IdentityciscoFlashMIB | of | Added new object ciscoFlashDeviceChangeExtTrap Added new object ciscoFlashDeviceInsertedExtNotif Added new object ciscoFlashDeviceRemovedExtNotif to support fl… | |
| 1.3.6.1.4.1.9.9.10.1 | NodeciscoFlashMIBObjects | |||
| 1.3.6.1.4.1.9.9.10.1.1 | NodeciscoFlashDevice | |||
| 1.3.6.1.4.1.9.9.10.1.1.1 | ScalarciscoFlashDevicesSupported | read-only | current | Number of Flash devices supported by the system. If the system does not support any Flash devices, this MIB will not be loaded on that system. The value of thi… |
| 1.3.6.1.4.1.9.9.10.1.1.2 | TableciscoFlashDeviceTable | not-accessible | current | Table of Flash device properties for each initialized Flash device. Each Flash device installed in a system is detected, sized, and initialized when the system… |
| 1.3.6.1.4.1.9.9.10.1.1.2.1 | RowciscoFlashDeviceEntry | not-accessible | current | An entry in the table of flash device properties for each initialized flash device. Each entry can be randomly accessed by using ciscoFlashDeviceIndex as an in… |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.1 | ColumnciscoFlashDeviceIndex | not-accessible | current | Flash device sequence number to index within the table of initialized flash devices. The lowest value should be 1. The highest should be less than or equal to … |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.2 | ColumnciscoFlashDeviceSize | read-only | current | Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. If the total size of the flash device is greater … |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.3 | ColumnciscoFlashDeviceMinPartitionSize | read-only | current | This object will give the minimum partition size supported for this device. For systems that execute code directly out of Flash, the minimum partition size nee… |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.4 | ColumnciscoFlashDeviceMaxPartitions | read-only | current | Max number of partitions supported by the system for this Flash device. Default will be 1, which actually means that partitioning is not supported. Note that t… |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.5 | ColumnciscoFlashDevicePartitions | read-only | current | Flash device partitions actually present. Number of partitions cannot exceed the minimum of ciscoFlashDeviceMaxPartitions and (ciscoFlashDeviceSize / ciscoFlas… |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.6 | ColumnciscoFlashDeviceChipCount | read-only | current | Total number of chips within the Flash device. The purpose of this object is to provide information upfront to a management station on how much chip info to ex… |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.7 | ColumnciscoFlashDeviceName | read-only | deprecated | Flash device name. This name is used to refer to the device within the system. Flash operations get directed to a device based on this name. The system has a c… |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.8 | ColumnciscoFlashDeviceDescr | read-only | current | Description of a Flash device. The description is meant to explain what the Flash device and its purpose is. Current values are: System flash - for the primary… |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.9 | ColumnciscoFlashDeviceController | read-only | current | Flash device controller. The h/w card that actually controls Flash read/write/erase. Relevant for the AGS+ systems where Flash may be controlled by the MC+, ST… |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.10 | ColumnciscoFlashDeviceCard | read-only | deprecated | This object will point to an instance of a card entry in the cardTable. The card entry will give details about the card on which the Flash device is actually l… |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.11 | ColumnciscoFlashDeviceProgrammingJumper | read-only | current | This object gives the state of a jumper (if present and can be determined) that controls the programming voltage called Vpp to the Flash device. Vpp is require… |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.12 | ColumnciscoFlashDeviceInitTime | read-only | current | System time at which device was initialized. For fixed devices, this will be the system time at boot up. For removable devices, it will be the time at which th… |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.13 | ColumnciscoFlashDeviceRemovable | read-only | current | Whether Flash device is removable. Generally, only PCMCIA Flash cards will be treated as removable. Socketed Flash chips and Flash SIMM modules will not be tre… |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.14 | ColumnciscoFlashPhyEntIndex | read-only | current | This object indicates the physical entity index of a physical entity in entPhysicalTable which the flash device actually located. |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.15 | ColumnciscoFlashDeviceNameExtended | read-only | current | Extended Flash device name whose size can be upto 255 characters. This name is used to refer to the device within the system. Flash operations get directed to … |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.16 | ColumnciscoFlashDeviceSizeExtended | read-only | current | Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. This object is a 64-bit version of ciscoFlashDevi… |
| 1.3.6.1.4.1.9.9.10.1.1.2.1.17 | ColumnciscoFlashDeviceMinPartitionSizeExtended | read-only | current | This object provides the minimum partition size supported for this device. This object is a 64-bit version of ciscoFlashDeviceMinPatitionSize. |
| 1.3.6.1.4.1.9.9.10.1.1.3 | NodeciscoFlashChips | |||
| 1.3.6.1.4.1.9.9.10.1.1.3.1 | TableciscoFlashChipTable | not-accessible | current | Table of Flash device chip properties for each initialized Flash device. This table is meant primarily for aiding error diagnosis. |
| 1.3.6.1.4.1.9.9.10.1.1.3.1.1 | RowciscoFlashChipEntry | not-accessible | current | An entry in the table of chip info for each flash device initialized in the system. An entry is indexed by two objects - the device index and the chip index wi… |
| 1.3.6.1.4.1.9.9.10.1.1.3.1.1.1 | ColumnciscoFlashChipIndex | not-accessible | current | Chip sequence number within selected flash device. Used to index within chip info table. Value starts from 1 and should not be greater than ciscoFlashDeviceChi… |
| 1.3.6.1.4.1.9.9.10.1.1.3.1.1.2 | ColumnciscoFlashChipCode | read-only | current | Manufacturer and device code for a chip. Lower byte will contain the device code. Upper byte will contain the manufacturer code. If a chip code is unknown beca… |
| 1.3.6.1.4.1.9.9.10.1.1.3.1.1.3 | ColumnciscoFlashChipDescr | read-only | current | Flash chip name corresponding to the chip code. The name will contain the manufacturer and the chip type. It will be of the form : Intel 27F008SA. In the case … |
| 1.3.6.1.4.1.9.9.10.1.1.3.1.1.4 | ColumnciscoFlashChipWriteRetries | read-only | current | This object will provide a cumulative count (since last system boot up or initialization) of the number of write retries that were done in the chip. If no writ… |
| 1.3.6.1.4.1.9.9.10.1.1.3.1.1.5 | ColumnciscoFlashChipEraseRetries | read-only | current | This object will provide a cumulative count (since last system boot up or initialization) of the number of erase retries that were done in the chip. Typically,… |
| 1.3.6.1.4.1.9.9.10.1.1.3.1.1.6 | ColumnciscoFlashChipMaxWriteRetries | read-only | current | The maximum number of write retries done at any single location before declaring a write failure. |
| 1.3.6.1.4.1.9.9.10.1.1.3.1.1.7 | ColumnciscoFlashChipMaxEraseRetries | read-only | current | The maximum number of erase retries done within an erase sector before declaring an erase failure. |
| 1.3.6.1.4.1.9.9.10.1.1.4 | NodeciscoFlashPartitions | |||
| 1.3.6.1.4.1.9.9.10.1.1.4.1 | TableciscoFlashPartitionTable | not-accessible | current | Table of flash device partition properties for each initialized flash partition. Whenever there is no explicit partitioning done, a single partition spanning t… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1 | RowciscoFlashPartitionEntry | not-accessible | current | An entry in the table of flash partition properties for each initialized flash partition. Each entry will be indexed by a device number and a partition number … |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.1 | ColumnciscoFlashPartitionIndex | not-accessible | current | Flash partition sequence number used to index within table of initialized flash partitions. |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.2 | ColumnciscoFlashPartitionStartChip | read-only | current | Chip sequence number of first chip in partition. Used as an index into the chip table. |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.3 | ColumnciscoFlashPartitionEndChip | read-only | current | Chip sequence number of last chip in partition. Used as an index into the chip table. |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.4 | ColumnciscoFlashPartitionSize | read-only | current | Flash partition size. It should be an integral multiple of ciscoFlashDeviceMinPartitionSize. If there is a single partition, this size will be equal to ciscoFl… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.5 | ColumnciscoFlashPartitionFreeSpace | read-only | current | Free space within a Flash partition. Note that the actual size of a file in Flash includes a small overhead that represents the file system's file header. Cert… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.6 | ColumnciscoFlashPartitionFileCount | read-only | current | Count of all files in a flash partition. Both good and bad (deleted or invalid checksum) files will be included in this count. |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.7 | ColumnciscoFlashPartitionChecksumAlgorithm | read-only | current | Checksum algorithm identifier for checksum method used by the file system. Normally, this would be fixed for a particular file system. When a file system write… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.8 | ColumnciscoFlashPartitionStatus | read-only | current | Flash partition status can be : * readOnly if device is not programmable either because chips could not be recognized or an erroneous mismatch of chips was det… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.9 | ColumnciscoFlashPartitionUpgradeMethod | read-only | current | Flash partition upgrade method, ie., method by which new files can be downloaded into the partition. FLH stands for Flash Load Helper, a feature provided on ru… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.10 | ColumnciscoFlashPartitionName | read-only | current | Flash partition name used to refer to a partition by the system. This can be any alpha-numeric character string of the form AAAAAAAAnn, where A represents an o… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.11 | ColumnciscoFlashPartitionNeedErasure | read-only | current | This object indicates whether a partition requires erasure before any write operations can be done in it. A management station should therefore retrieve this o… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.12 | ColumnciscoFlashPartitionFileNameLength | read-only | current | Maximum file name length supported by the file system. Max file name length will depend on the file system implemented. Today, all file systems support a max l… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.13 | ColumnciscoFlashPartitionSizeExtended | read-only | current | Flash partition size. It should be an integral multiple of ciscoFlashDeviceMinPartitionSize. If there is a single partition, this size will be equal to ciscoFl… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.14 | ColumnciscoFlashPartitionFreeSpaceExtended | read-only | current | Free space within a Flash partition. Note that the actual size of a file in Flash includes a small overhead that represents the file system's file header. Cert… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.15 | ColumnciscoFlashPartitionLowSpaceNotifThreshold | read-write | current | This object specifies the minimum threshold value in percentage of free space for each partition. If the free space available goes below this threshold value a… |
| 1.3.6.1.4.1.9.9.10.1.1.4.2 | NodeciscoFlashFiles | |||
| 1.3.6.1.4.1.9.9.10.1.1.4.2.1 | TableciscoFlashFileTable | not-accessible | current | Table of information for files in a Flash partition. |
| 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1 | RowciscoFlashFileEntry | not-accessible | current | An entry in the table of Flash file properties for each initialized Flash partition. Each entry represents a file and gives details about the file. An entry is… |
| 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.1 | ColumnciscoFlashFileIndex | not-accessible | current | Flash file sequence number used to index within a Flash partition directory table. |
| 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.2 | ColumnciscoFlashFileSize | read-only | current | Size of the file in bytes. Note that this size does not include the size of the filesystem file header. File size will always be non-zero. |
| 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.3 | ColumnciscoFlashFileChecksum | read-only | current | File checksum stored in the file header. This checksum is computed and stored when the file is written into Flash. It serves to validate the data written into … |
| 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.4 | ColumnciscoFlashFileStatus | read-only | current | Status of a file. A file could be explicitly deleted if the file system supports such a user command facility. Alternately, an existing good file would be auto… |
| 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.5 | ColumnciscoFlashFileName | read-only | current | Flash file name as specified by the user copying in the file. The name should not include the colon (:) character as it is a special separator character used t… |
| 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.6 | ColumnciscoFlashFileType | read-only | current | Type of the file. |
| 1.3.6.1.4.1.9.9.10.1.1.4.2.1.1.7 | ColumnciscoFlashFileDate | read-only | current | The time at which this file was created. |
| 1.3.6.1.4.1.9.9.10.1.1.4.2.2 | TableciscoFlashFileByTypeTable | not-accessible | current | Table of information for files on the manageable flash devices sorted by File Types. |
| 1.3.6.1.4.1.9.9.10.1.1.4.2.2.1 | RowciscoFlashFileByTypeEntry | not-accessible | current | An entry in the table of Flash file properties for each initialized Flash partition. Each entry represents a file sorted by file type. This table contains exac… |
| 1.3.6.1.4.1.9.9.10.1.1.4.2.2.1.1 | ColumnciscoFlashFileByTypeSize | read-only | current | This object represents exactly the same info as ciscoFlashFileSize object in ciscoFlashFileTable. |
| 1.3.6.1.4.1.9.9.10.1.1.4.2.2.1.2 | ColumnciscoFlashFileByTypeChecksum | read-only | current | This object represents exactly the same info as ciscoFlashFileChecksum object in ciscoFlashFileTable. |
| 1.3.6.1.4.1.9.9.10.1.1.4.2.2.1.3 | ColumnciscoFlashFileByTypeStatus | read-only | current | This object represents exactly the same info as ciscoFlashFileStatus object in ciscoFlashFileTable. |
| 1.3.6.1.4.1.9.9.10.1.1.4.2.2.1.4 | ColumnciscoFlashFileByTypeName | read-only | current | This object represents exactly the same info as ciscoFlashFileName object in ciscoFlashFileTable. |
| 1.3.6.1.4.1.9.9.10.1.1.4.2.2.1.5 | ColumnciscoFlashFileByTypeDate | read-only | current | This object represents exactly the same info as ciscoFlashFileDate object in ciscoFlashFileTable. |
| 1.3.6.1.4.1.9.9.10.1.2 | NodeciscoFlashOps | |||
| 1.3.6.1.4.1.9.9.10.1.2.1 | TableciscoFlashCopyTable | not-accessible | current | A table of Flash copy operation entries. Each entry represents a Flash copy operation (to or from Flash) that has been initiated. |
| 1.3.6.1.4.1.9.9.10.1.2.1.1 | RowciscoFlashCopyEntry | not-accessible | current | A Flash copy operation entry. Each entry consists of a command, a source, and optional parameters such as protocol to be used, a destination, a server address,… |
| 1.3.6.1.4.1.9.9.10.1.2.1.1.1 | ColumnciscoFlashCopySerialNumber | not-accessible | current | Object which specifies a unique entry in the table. A management station wishing to initiate a copy operation should use a pseudo-random value for this object … |
| 1.3.6.1.4.1.9.9.10.1.2.1.1.2 | ColumnciscoFlashCopyCommand | read-create | current | The copy command to be executed. Mandatory. Note that it is possible for a system to support multiple file systems (different file systems on different Flash d… |
| 1.3.6.1.4.1.9.9.10.1.2.1.1.3 | ColumnciscoFlashCopyProtocol | read-create | current | The protocol to be used for any copy. Optional. Will default to tftp if not specified. Since feature support depends on a software release, version number with… |
| 1.3.6.1.4.1.9.9.10.1.2.1.1.4 | ColumnciscoFlashCopyServerAddress | read-create | deprecated | The server address to be used for any copy. Optional. Will default to 'FFFFFFFF'H (or 255.255.255.255). Since this object can just hold only IPv4 Transport typ… |
| 1.3.6.1.4.1.9.9.10.1.2.1.1.5 | ColumnciscoFlashCopySourceName | read-create | current | Source file name, either in Flash or on a server, depending on the type of copy command. Mandatory. For a copy from Flash: File name must be of the form [devic… |
| 1.3.6.1.4.1.9.9.10.1.2.1.1.6 | ColumnciscoFlashCopyDestinationName | read-create | current | Destination file name. For a copy to Flash: File name must be of the form {device>:][<partition>:]<file> where <device> is a value obtained from FlashDeviceNam… |
| 1.3.6.1.4.1.9.9.10.1.2.1.1.7 | ColumnciscoFlashCopyRemoteUserName | read-create | current | Remote user name for copy via rcp protocol. Optional. This object will be ignored for protocols other than rcp. If specified, it will override the remote user-… |
| 1.3.6.1.4.1.9.9.10.1.2.1.1.8 | ColumnciscoFlashCopyStatus | read-only | current | The status of the specified copy operation. copyOperationPending : operation request is received and pending for validation and process copyInProgress : specif… |
| 1.3.6.1.4.1.9.9.10.1.2.1.1.9 | ColumnciscoFlashCopyNotifyOnCompletion | read-create | current | Specifies whether or not a notification should be generated on the completion of the copy operation. If specified, ciscoFlashCopyCompletionTrap will be generat… |
| 1.3.6.1.4.1.9.9.10.1.2.1.1.10 | ColumnciscoFlashCopyTime | read-only | current | Time taken for the copy operation. This object will be like a stopwatch, starting when the operation starts, stopping when the operation completes. If a manage… |
| 1.3.6.1.4.1.9.9.10.1.2.1.1.11 | ColumnciscoFlashCopyEntryStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.9.9.10.1.2.1.1.12 | ColumnciscoFlashCopyVerify | read-create | current | Specifies whether the file that is copied need to be verified for integrity / authenticity, after copy succeeds. If it is set to true, and if the file that is … |
| 1.3.6.1.4.1.9.9.10.1.2.1.1.13 | ColumnciscoFlashCopyServerAddrType | read-create | current | This object indicates the transport type of the address contained in ciscoFlashCopyServerAddrRev1. Optional. Will default to '1' (IPv4 address type). |
| 1.3.6.1.4.1.9.9.10.1.2.1.1.14 | ColumnciscoFlashCopyServerAddrRev1 | read-create | current | The server address to be used for any copy. Optional. Will default to 'FFFFFFFF'H (or 255.255.255.255). The Format of this address depends on the value of the … |
| 1.3.6.1.4.1.9.9.10.1.2.1.1.15 | ColumnciscoFlashCopyRemotePassword | read-create | current | Password used by ftp, sftp or scp for copying a file to/from an ftp/sftp/scp server. This object must be created when the ciscoFlashCopyProtocol is ftp, sftp o… |
| 1.3.6.1.4.1.9.9.10.1.2.2 | TableciscoFlashPartitioningTable | not-accessible | current | A table of Flash partitioning operation entries. Each entry represents a Flash partitioning operation that has been initiated. |
| 1.3.6.1.4.1.9.9.10.1.2.2.1 | RowciscoFlashPartitioningEntry | not-accessible | current | A Flash partitioning operation entry. Each entry consists of the command, the target device, the partition count, and optionally the partition sizes. A managem… |
| 1.3.6.1.4.1.9.9.10.1.2.2.1.1 | ColumnciscoFlashPartitioningSerialNumber | not-accessible | current | Object which specifies a unique entry in the partitioning operations table. A management station wishing to initiate a partitioning operation should use a pseu… |
| 1.3.6.1.4.1.9.9.10.1.2.2.1.2 | ColumnciscoFlashPartitioningCommand | read-create | current | The partitioning command to be executed. Mandatory. If the command is unsupported, the partitioningInvalidOperation error will be reported in the operation sta… |
| 1.3.6.1.4.1.9.9.10.1.2.2.1.3 | ColumnciscoFlashPartitioningDestinationName | read-create | current | Destination device name. This name will be the value obtained from FlashDeviceName. If the name is not specified, the default Flash device will be assumed. |
| 1.3.6.1.4.1.9.9.10.1.2.2.1.4 | ColumnciscoFlashPartitioningPartitionCount | read-create | current | This object is used to specify the number of partitions to be created. Its value cannot exceed the value of ciscoFlashDeviceMaxPartitions. To undo partitioning… |
| 1.3.6.1.4.1.9.9.10.1.2.2.1.5 | ColumnciscoFlashPartitioningPartitionSizes | read-create | current | This object is used to explicitly specify the size of each partition to be created. The size of each partition will be in units of ciscoFlashDeviceMinPartition… |
| 1.3.6.1.4.1.9.9.10.1.2.2.1.6 | ColumnciscoFlashPartitioningStatus | read-only | current | The status of the specified partitioning operation. partitioningInProgress : specified operation is active partitioningOperationSuccess : specified operation i… |
| 1.3.6.1.4.1.9.9.10.1.2.2.1.7 | ColumnciscoFlashPartitioningNotifyOnCompletion | read-create | current | Specifies whether or not a notification should be generated on the completion of the partitioning operation. If specified, ciscoFlashPartitioningCompletionTrap… |
| 1.3.6.1.4.1.9.9.10.1.2.2.1.8 | ColumnciscoFlashPartitioningTime | read-only | current | Time taken for the operation. This object will be like a stopwatch, starting when the operation starts, stopping when the operation completes. If a management … |
| 1.3.6.1.4.1.9.9.10.1.2.2.1.9 | ColumnciscoFlashPartitioningEntryStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.9.9.10.1.2.3 | TableciscoFlashMiscOpTable | not-accessible | current | A table of misc Flash operation entries. Each entry represents a Flash operation that has been initiated. |
| 1.3.6.1.4.1.9.9.10.1.2.3.1 | RowciscoFlashMiscOpEntry | not-accessible | current | A Flash operation entry. Each entry consists of a command, a target, and any optional parameters. A management station wishing to create an entry should first … |
| 1.3.6.1.4.1.9.9.10.1.2.3.1.1 | ColumnciscoFlashMiscOpSerialNumber | not-accessible | current | Object which specifies a unique entry in the table. A management station wishing to initiate a flash operation should use a pseudo-random value for this object… |
| 1.3.6.1.4.1.9.9.10.1.2.3.1.2 | ColumnciscoFlashMiscOpCommand | read-create | current | The command to be executed. Mandatory. Note that it is possible for a system to support multiple file systems (different file systems on different Flash device… |
| 1.3.6.1.4.1.9.9.10.1.2.3.1.3 | ColumnciscoFlashMiscOpDestinationName | read-create | current | Destination file, or partition name. File name must be of the form [device>:][<partition>:]<file> where <device> is a value obtained from FlashDeviceName, <par… |
| 1.3.6.1.4.1.9.9.10.1.2.3.1.4 | ColumnciscoFlashMiscOpStatus | read-only | current | The status of the specified operation. miscOpInProgress : specified operation is active miscOpOperationSuccess : specified operation is supported and completed… |
| 1.3.6.1.4.1.9.9.10.1.2.3.1.5 | ColumnciscoFlashMiscOpNotifyOnCompletion | read-create | current | Specifies whether or not a notification should be generated on the completion of an operation. If specified, ciscoFlashMiscOpCompletionTrap will be generated. … |
| 1.3.6.1.4.1.9.9.10.1.2.3.1.6 | ColumnciscoFlashMiscOpTime | read-only | current | Time taken for the operation. This object will be like a stopwatch, starting when the operation starts, stopping when the operation completes. If a management … |
| 1.3.6.1.4.1.9.9.10.1.2.3.1.7 | ColumnciscoFlashMiscOpEntryStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.9.9.10.1.3 | NodeciscoFlashMIBTrapPrefix | |||
| 1.3.6.1.4.1.9.9.10.1.3.0 | NodeciscoFlashMIBTraps | |||
| 1.3.6.1.4.1.9.9.10.1.3.0.1 | NotificationciscoFlashCopyCompletionTrap | current | A ciscoFlashCopyCompletionTrap is sent at the completion of a flash copy operation if such a trap was requested when the operation was initiated. | |
| 1.3.6.1.4.1.9.9.10.1.3.0.2 | NotificationciscoFlashPartitioningCompletionTrap | current | A ciscoFlashPartitioningCompletionTrap is sent at the completion of a partitioning operation if such a trap was requested when the operation was initiated. | |
| 1.3.6.1.4.1.9.9.10.1.3.0.3 | NotificationciscoFlashMiscOpCompletionTrap | current | A ciscoFlashMiscOpCompletionTrap is sent at the completion of a miscellaneous flash operation (enumerated in ciscoFlashMiscOpCommand) if such a trap was reques… | |
| 1.3.6.1.4.1.9.9.10.1.3.0.4 | NotificationciscoFlashDeviceChangeTrap | deprecated | A ciscoFlashDeviceChangeTrap is sent whenever a removable Flash device is inserted or removed. | |
| 1.3.6.1.4.1.9.9.10.1.3.0.5 | NotificationciscoFlashDeviceInsertedNotif | deprecated | A ciscoFlashDeviceInsertedNotif notification is sent whenever a removable Flash device is inserted. | |
| 1.3.6.1.4.1.9.9.10.1.3.0.6 | NotificationciscoFlashDeviceRemovedNotif | deprecated | A ciscoFlashDeviceRemovedNotif notification is sent whenever a removable Flash device is removed. | |
| 1.3.6.1.4.1.9.9.10.1.3.0.7 | NotificationciscoFlashDeviceInsertedNotifRev1 | current | A ciscoFlashDeviceInsertedNotif notification is sent whenever a removable Flash device is inserted ciscoFlashDeviceInsertedNotifRev1 depcrecates ciscoFlashDevi… | |
| 1.3.6.1.4.1.9.9.10.1.3.0.8 | NotificationciscoFlashDeviceRemovedNotifRev1 | current | A ciscoFlashDeviceRemovedNotif notification is sent whenever a removable Flash device is removed. ciscoFlashDeviceRemovedNotifRev1 depcrecates ciscoFlashDevice… | |
| 1.3.6.1.4.1.9.9.10.1.3.0.9 | NotificationciscoFlashPartitionLowSpaceNotif | current | A ciscoFlashPartitionLowSpaceNotif notification is sent when the percentage of free space in a flash partition falls below ciscoFlashPartitionLowSpaceNotifThre… | |
| 1.3.6.1.4.1.9.9.10.1.3.0.10 | NotificationciscoFlashPartitionLowSpaceRecoveryNotif | current | A ciscoFlashPartitionLowSpaceRecoveryNotif notification is sent whenever the free space in a flash partition becomes normal once it has gone low. This notifica… | |
| 1.3.6.1.4.1.9.9.10.1.3.0.11 | NotificationciscoFlashDeviceChangeExtTrap | current | A ciscoFlashDeviceChangeExtTrap is sent whenever a removable Flash device is inserted or removed. | |
| 1.3.6.1.4.1.9.9.10.1.3.0.12 | NotificationciscoFlashDeviceInsertedExtNotif | current | A ciscoFlashDeviceInsertedExtNotif notification is sent whenever a removable Flash device is inserted. | |
| 1.3.6.1.4.1.9.9.10.1.3.0.13 | NotificationciscoFlashDeviceRemovedExtNotif | current | A ciscoFlashDeviceRemovedExtNotif notification is sent whenever a removable Flash device removed. | |
| 1.3.6.1.4.1.9.9.10.1.4 | NodeciscoFlashCfg | |||
| 1.3.6.1.4.1.9.9.10.1.4.1 | ScalarciscoFlashCfgDevInsNotifEnable | read-write | current | Specifies whether or not a notification should be generated on the insertion of a Flash device. If the value of this object is 'true' then the ciscoFlashDevice… |
| 1.3.6.1.4.1.9.9.10.1.4.2 | ScalarciscoFlashCfgDevRemNotifEnable | read-write | current | Specifies whether or not a notification should be generated on the removal of a Flash device. If the value of this object is 'true' then the ciscoFlashDeviceRe… |
| 1.3.6.1.4.1.9.9.10.1.4.3 | ScalarciscoFlashPartitionLowSpaceNotifEnable | read-write | current | This object specifies whether or not a notification should be generated when the free space falls below the threshold value on a flash partition and on recover… |
| 1.3.6.1.4.1.9.9.10.2 | NodeciscoFlashMIBConformance | |||
| 1.3.6.1.4.1.9.9.10.2.1 | NodeciscoFlashMIBCompliances | |||
| 1.3.6.1.4.1.9.9.10.2.1.1 | ComplianceciscoFlashMIBCompliance | deprecated | The compliance statement for entities that support the Cisco Flash MIB. | |
| 1.3.6.1.4.1.9.9.10.2.1.2 | ComplianceciscoFlashMIBComplianceRev1 | deprecated | The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev2. | |
| 1.3.6.1.4.1.9.9.10.2.1.3 | ComplianceciscoFlashMIBComplianceRev2 | deprecated | The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev3. | |
| 1.3.6.1.4.1.9.9.10.2.1.4 | ComplianceciscoFlashMIBComplianceRev3 | deprecated | The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev4. | |
| 1.3.6.1.4.1.9.9.10.2.1.5 | ComplianceciscoFlashMIBComplianceRev4 | deprecated | The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev5. | |
| 1.3.6.1.4.1.9.9.10.2.1.6 | ComplianceciscoFlashMIBComplianceRev5 | deprecated | The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev6. | |
| 1.3.6.1.4.1.9.9.10.2.1.7 | ComplianceciscoFlashMIBComplianceRev6 | deprecated | The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev7. | |
| 1.3.6.1.4.1.9.9.10.2.1.8 | ComplianceciscoFlashMIBComplianceRev7 | deprecated | The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev8. | |
| 1.3.6.1.4.1.9.9.10.2.1.9 | ComplianceciscoFlashMIBComplianceRev8 | deprecated | The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev9. | |
| 1.3.6.1.4.1.9.9.10.2.1.10 | ComplianceciscoFlashMIBComplianceRev9 | deprecated | The compliance statement for entities that support the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev10. | |
| 1.3.6.1.4.1.9.9.10.2.1.11 | ComplianceciscoFlashMIBComplianceRev10 | deprecated | The compliance statement for entities that supports the Cisco Flash MIB. This compliance is deprecated by ciscoFlashMIBComplianceRev11. | |
| 1.3.6.1.4.1.9.9.10.2.1.12 | ComplianceciscoFlashMIBComplianceRev11 | current | The compliance statement for entities that supports the Cisco Flash MIB. | |
| 1.3.6.1.4.1.9.9.10.2.2 | NodeciscoFlashMIBGroups | |||
| 1.3.6.1.4.1.9.9.10.2.2.1 | GroupciscoFlashDeviceInfoGroup | deprecated | A collection of objects providing mandatory Flash device level information. | |
| 1.3.6.1.4.1.9.9.10.2.2.2 | GroupciscoFlashDeviceOptionalInfoGroup | deprecated | A collection of optional objects providing Flash device level information. | |
| 1.3.6.1.4.1.9.9.10.2.2.3 | GroupciscoFlashChipInfoGroup | current | A collection of objects providing Flash chip level information. | |
| 1.3.6.1.4.1.9.9.10.2.2.4 | GroupciscoFlashPartitionInfoGroup | deprecated | A collection of objects providing Flash partition level information. Where a Flash device has not been partitioned or does not support partitioning, a partitio… | |
| 1.3.6.1.4.1.9.9.10.2.2.5 | GroupciscoFlashFileInfoGroup | deprecated | A collection of objects providing Flash file level information. | |
| 1.3.6.1.4.1.9.9.10.2.2.6 | GroupciscoFlashCopyOpGroup | deprecated | A collection of objects providing the ability to copy files to and from a Flash partition. | |
| 1.3.6.1.4.1.9.9.10.2.2.7 | GroupciscoFlashPartitioningOpGroup | current | A collection of objects providing the ability to partition a Flash device. | |
| 1.3.6.1.4.1.9.9.10.2.2.8 | GroupciscoFlashMiscOpGroup | current | A collection of objects providing the ability to perform misc operations (erase, file verification, etc) in a Flash device. | |
| 1.3.6.1.4.1.9.9.10.2.2.9 | GroupciscoFlashNotifGroup | deprecated | The set of notification defined by this MIB. | |
| 1.3.6.1.4.1.9.9.10.2.2.10 | GroupciscoFlashFileInfoGroupRev1 | current | A collection of objects providing Flash file level information. | |
| 1.3.6.1.4.1.9.9.10.2.2.11 | GroupciscoFlashNotifGroupRev1 | deprecated | The set of notification defined by this MIB. | |
| 1.3.6.1.4.1.9.9.10.2.2.12 | GroupciscoFlashDeviceInfoGroupRev1 | deprecated | A collection of objects providing mandatory Flash device level information. | |
| 1.3.6.1.4.1.9.9.10.2.2.13 | GroupciscoFlashDeviceOptionalInfoGroupRev1 | current | A collection of optional objects providing Flash device level information. This deprecates ciscoFlashDeviceOptionalInfoGroup object group. | |
| 1.3.6.1.4.1.9.9.10.2.2.14 | GroupciscoFlashCopyOpGroupRev1 | deprecated | A collection of objects providing the ability to copy files to and from a Flash partition. This group is deprecated by new group ciscoFlashCopyOpGroupRev2. | |
| 1.3.6.1.4.1.9.9.10.2.2.15 | GroupciscoFlashDeviceInfoGroupRev2 | current | A collection of objects providing mandatory Flash device level information. | |
| 1.3.6.1.4.1.9.9.10.2.2.16 | GroupciscoFlashCopyOpGroupRev2 | current | A collection of objects providing the ability to copy files to and from a Flash partition. This Group deprecates ciscoFlashCopyOpGroupRev1. | |
| 1.3.6.1.4.1.9.9.10.2.2.17 | GroupciscoFlashNotifGroupRev2 | deprecated | The set of notification defined by this MIB. ciscoFlashNotifGroupRev2 object is superseded by ciscoFlashNotifGroupRev3. | |
| 1.3.6.1.4.1.9.9.10.2.2.18 | GroupciscoFlashCopyOpGroupRev3 | current | A collection of objects providing the ability to copy files to and from a Flash partition. This Group supplements ciscoFlashCopyOpGroupRev2. | |
| 1.3.6.1.4.1.9.9.10.2.2.19 | GroupciscoFlashFileInfoGroupSupp1 | current | A collection of objects providing Flash file level information in addition to the objects found in ciscoFlashFileInfoGroupRev1. | |
| 1.3.6.1.4.1.9.9.10.2.2.20 | GroupciscoFlashFileTypeInfoGroup | current | A collection of objects providing Flash file information which are sorted by file type. | |
| 1.3.6.1.4.1.9.9.10.2.2.21 | GroupciscoFlashDeviceInfoExtGroup | current | A collection of objects providing high capacity mandatory Flash device level information. | |
| 1.3.6.1.4.1.9.9.10.2.2.22 | GroupciscoFlashPartitionInfoExtGroup | current | A collection of objects providing haigh capacity Flash partition level information. | |
| 1.3.6.1.4.1.9.9.10.2.2.23 | GroupciscoFlashDeviceInfoExtGroupSupRev1 | current | A collection of objects providing high capacity mandatory Flash device level information. This Group is supplement to ciscoFlashDeviceInfoExtGroup. | |
| 1.3.6.1.4.1.9.9.10.2.2.24 | GroupciscoFlashPartitionInfoGroupRev1 | current | A collection of objects providing Flash partition level information. Where a Flash device has not been partitioned or does not support partitioning, a partitio… | |
| 1.3.6.1.4.1.9.9.10.2.2.25 | GroupciscoFlashNotifGroupRev3 | current | The set of notification defined by this MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ChecksumString | OCTET STRING | current | Represents the checksum of a file. |
| FlashFileType | INTEGER { unknown(1), config(2), image(3), directory(4), crashinfo(5) } | current | File types for files in a flash. unknown - file type is not one of the following. config - configuration file like startup configuration or running configuration. image - image file. directory - directory entry. crashin… |