CISCO-GPRS-L2RLY-MIB
34 objects
The MIB Module for managing the General Packet Radio Service(GPRS) L2RLY related information on Servicing GPRS Support Node(SGSN). In GPRS network, a SGSN is typically implemented as a single node; in cisco-Alcatel joint development, it's split into Telecom part (T-node) and Datacom part (D-node). T-nodes and D-nodes are connected by two fast ethernets. A simple connectionless protocol called L2RLY is used to provide service of forwarding packet between T-unit and D-unit, flow control and defending against the failure of a FE subnet.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.9993 | IdentityciscoGprsL2rlyMIB | The MIB Module for managing the General Packet Radio Service(GPRS) L2RLY related information on Servicing GPRS Support Node(SGSN). In GPRS network, a SGSN is t… | ||
| 1.3.6.1.4.1.9.9.9993.1 | NodeciscoGprsL2rlyObjects | |||
| 1.3.6.1.4.1.9.9.9993.1.1 | NodeciscoGprsL2rlyConfig | |||
| 1.3.6.1.4.1.9.9.9993.1.1.1 | ScalarcgprsL2rlyUid | read-write | current | L2 Relay unit identification. |
| 1.3.6.1.4.1.9.9.9993.1.1.2 | ScalarcgprsL2rlyUnitType | read-write | current | The type can be either a datacom unit, or a telecom unit. |
| 1.3.6.1.4.1.9.9.9993.1.1.3 | ScalarcgprsL2rlyEchoTimer | read-write | current | The frequency of transmission of self_id packet. This packet is transmitted periodically, for keep-alive and auto discovery purposes. |
| 1.3.6.1.4.1.9.9.9993.1.1.4 | ScalarcgprsL2rlyFlowControlFlag | read-write | current | L2 Relay flow control function flag. 'on' means that the flow control has been enabled, and 'off' means the converse. |
| 1.3.6.1.4.1.9.9.9993.1.1.5 | ScalarcgprsL2rlyDroppedPktsMonTime | read-write | current | The configurable time duration for monitoring the excessive rate at which packets are dropped by the L2 Relay on SGSN due to traffic congestion problem. |
| 1.3.6.1.4.1.9.9.9993.1.1.6 | ScalarcgprsL2rlyNoRespToKeepAliveMsgNotificationEnable | read-write | current | The object indicates whether the system produces the cgprsL2rlyNoRespToKeepAliveMsgNotification. A false value will prevent the cgprsL2rlyNoRespToKeepAliveMsgN… |
| 1.3.6.1.4.1.9.9.9993.1.1.7 | ScalarcgprsL2rlyUnitJoinNotificationEnable | read-write | current | The object indicates whether the system produces the cgprsL2rlyUnitJoinNotification. A false value will prevent the cgprsL2rlyUnitJoinNotificationcgprs from be… |
| 1.3.6.1.4.1.9.9.9993.1.1.8 | TablecgprsL2rlyInterfaceTable | not-accessible | current | The table that lists the interfaces which l2rly is using. Currently the table has just two and always two entries. There is only one l2rly T or D unit on each … |
| 1.3.6.1.4.1.9.9.9993.1.1.8.1 | RowcgprsL2rlyInterfaceEntry | not-accessible | current | The l2rly interface table entry. |
| 1.3.6.1.4.1.9.9.9993.1.1.8.1.1 | ColumncgprsL2rlyInterfaceId | not-accessible | current | The ifIndex for the corresponding interface which l2rly is using. |
| 1.3.6.1.4.1.9.9.9993.1.1.8.1.2 | ColumncgprsL2rlyInterfaceRowStatus | read-create | current | The status for row creation and deletion. |
| 1.3.6.1.4.1.9.9.9993.1.2 | NodeciscoGprsL2rlyStats | |||
| 1.3.6.1.4.1.9.9.9993.1.2.1 | ScalarcgprsL2rlyFlowControlTriggerCount | read-only | current | A running count indicating how many times L2 Relay flow control has been trigerred. |
| 1.3.6.1.4.1.9.9.9993.1.2.2 | ScalarcgprsL2rlyInputQLen | read-only | current | The L2 Relay input queue length. |
| 1.3.6.1.4.1.9.9.9993.1.2.3 | ScalarcgprsL2rlyTotalPacketsDropped | read-only | current | Total number of packets dropped by L2 Relay due to unknown headers since system startup. |
| 1.3.6.1.4.1.9.9.9993.1.2.4 | ScalarcgprsL2rlyDroppedPktsTimeFrame | read-only | current | The time frame within which the number of L2 Relay packets, defined by cgprsL2rlyDroppedPktsCount, are dropped. |
| 1.3.6.1.4.1.9.9.9993.1.2.5 | ScalarcgprsL2rlyDroppedPktsCount | read-only | current | The number of packets dropped by L2 Relay on the SGSN within cgprsL2rlyDroppedPktsTimeFrame. |
| 1.3.6.1.4.1.9.9.9993.1.2.6 | TablecgprsL2rlyPeerTable | not-accessible | current | The table lists all the l2rly units on the peer nodes that directly connect with this l2rly units through two fast ethernets. |
| 1.3.6.1.4.1.9.9.9993.1.2.6.1 | RowcgprsL2rlyPeerEntry | not-accessible | current | L2rly unit peer entries. |
| 1.3.6.1.4.1.9.9.9993.1.2.6.1.1 | ColumncgprsL2rlyPeerUid | not-accessible | current | The Uid that uniquely identify the peer l2rly unit that connects to the same fast ethernets as this l2rly unit. |
| 1.3.6.1.4.1.9.9.9993.1.2.6.1.2 | ColumncgprsL2rlyPeerUnitType | read-only | current | The type of the peer l2rly on other devices which connects to the same fast ethernets as this one. |
| 1.3.6.1.4.1.9.9.9993.2 | NodeciscoGprsL2rlyNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.9993.2.0 | NodeciscoGprsL2rlyNotifications | |||
| 1.3.6.1.4.1.9.9.9993.2.0.1 | NotificationcgprsL2rlyUnitJoinNotification | current | This trap indicates that a new 'SGSN T-node' joins the service. This happens when a new SGSN node restarts or the network problem (fast ethernets among the uni… | |
| 1.3.6.1.4.1.9.9.9993.2.0.2 | NotificationcgprsL2rlyNoRespToKeepAliveMsgNotification | current | This trap indicates that the 'SGSN T-node' failed to respond to the L2 Relay 'Keep Alive' message. The cgprsL2rlyUid variable identifies the 'SGSN T-node' that… | |
| 1.3.6.1.4.1.9.9.9993.3 | NodeciscoGprsL2rlyConformances | |||
| 1.3.6.1.4.1.9.9.9993.3.1 | NodecgprsL2rlyCompliances | |||
| 1.3.6.1.4.1.9.9.9993.3.1.1 | CompliancecgprsL2rlyCompliance | current | The compliance statement for entities which implement the CISCO GPRS L2RLY MIB. | |
| 1.3.6.1.4.1.9.9.9993.3.2 | NodecgprsL2rlyGroups | |||
| 1.3.6.1.4.1.9.9.9993.3.2.1 | GroupcgprsL2rlyConfigGroup | current | A collection of configurable parameters for L2RLY. | |
| 1.3.6.1.4.1.9.9.9993.3.2.2 | GroupcgprsL2rlyStatsGroup | current | A collection of stats for L2RLY. |