CISCO-IETF-BFD-MIB
71 objects
This document contains the Management information base for Bidirectional Forwarding Detection(BFD) Protocol as defined in draft-ietf-bfd-base-06.txt. BFD is a protocol intended to detect faults in the bidirectional path between two forwarding engines, including interfaces, data link(s), and to the extent possible the forwarding engines themselves, with potentially very low latency. It operates independently of media, data protocols, and routing protocols. This MIB module is based on the Internet Draft draft-ietf-bfd-mib-03.txt and draft-ietf-bfd-mib-04.txt
Imported Objects
| CISCO-SMI | ciscoExperiment |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.137 | IdentityciscoIetfBfdMIB | This document contains the Management information base for Bidirectional Forwarding Detection(BFD) Protocol as defined in draft-ietf-bfd-base-06.txt. BFD is a … | ||
| 1.3.6.1.4.1.9.10.137.0 | NodeciscoBfdNotifications | |||
| 1.3.6.1.4.1.9.10.137.0.1 | NotificationciscoBfdSessUp | current | This notification is generated when the ciscoBfdSessState object for one or more contiguous entries in ciscoBfdSessTable are about to enter the up(4) state fro… | |
| 1.3.6.1.4.1.9.10.137.0.2 | NotificationciscoBfdSessDown | current | This notification is generated when the ciscoBfdSessState object for one or more contiguous entries in ciscoBfdSessTable are about to enter the down(2) or admi… | |
| 1.3.6.1.4.1.9.10.137.1 | NodeciscoBfdObjects | |||
| 1.3.6.1.4.1.9.10.137.1.1 | NodeciscoBfdScalarObjects | |||
| 1.3.6.1.4.1.9.10.137.1.1.1 | ScalarciscoBfdAdminStatus | read-write | current | The global administrative status of BFD in this router. The value 'enabled' denotes that the BFD Process is active on at least one interface; 'disabled' disabl… |
| 1.3.6.1.4.1.9.10.137.1.1.3 | ScalarciscoBfdVersionNumber | read-only | current | The current version number of the BFD protocol. |
| 1.3.6.1.4.1.9.10.137.1.1.4 | ScalarciscoBfdSessNotificationsEnable | read-write | current | If this object is set to true(1), then it enables the emission of ciscoBfdSessUp and ciscoBfdSessDown notifications; otherwise these notifications are not emit… |
| 1.3.6.1.4.1.9.10.137.1.2 | TableciscoBfdSessTable | not-accessible | current | The BFD Session Table describes the BFD sessions. |
| 1.3.6.1.4.1.9.10.137.1.2.1 | RowciscoBfdSessEntry | not-accessible | current | The BFD Session Entry describes BFD session. |
| 1.3.6.1.4.1.9.10.137.1.2.1.1 | ColumnciscoBfdSessIndex | not-accessible | current | This object contains an index used to represent a unique BFD session on this device. |
| 1.3.6.1.4.1.9.10.137.1.2.1.2 | ColumnciscoBfdSessApplicationId | read-only | current | This object contains an index used to indicate a local application which owns or maintains this BFD session. For instance, the MPLS VPN process may maintain a … |
| 1.3.6.1.4.1.9.10.137.1.2.1.3 | ColumnciscoBfdSessDiscriminator | read-only | current | This object specifies the local discriminator for this BFD session, used to uniquely identify it. |
| 1.3.6.1.4.1.9.10.137.1.2.1.4 | ColumnciscoBfdSessRemoteDiscr | read-only | current | This object specifies the session discriminator chosen by the remote system for this BFD session. |
| 1.3.6.1.4.1.9.10.137.1.2.1.5 | ColumnciscoBfdSessUdpPort | read-create | current | The destination UDP Port for BFD. The default value is the well-known value for this port. BFD State failing(5) is only applicable if this BFD session is runni… |
| 1.3.6.1.4.1.9.10.137.1.2.1.6 | ColumnciscoBfdSessState | read-only | current | The perceived state of the BFD session. |
| 1.3.6.1.4.1.9.10.137.1.2.1.7 | ColumnciscoBfdSessRemoteHeardFlag | read-only | current | This object specifies status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local system is actively receiving BFD p… |
| 1.3.6.1.4.1.9.10.137.1.2.1.8 | ColumnciscoBfdSessDiag | read-only | current | A diagnostic code specifying the local system's reason for the last transition of the session from up(1) to some other state. |
| 1.3.6.1.4.1.9.10.137.1.2.1.9 | ColumnciscoBfdSessOperMode | read-only | current | This object specifies current operating mode that BFD session is operating in. |
| 1.3.6.1.4.1.9.10.137.1.2.1.10 | ColumnciscoBfdSessDemandModeDesiredFlag | read-create | current | This object indicates that the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or fa… |
| 1.3.6.1.4.1.9.10.137.1.2.1.11 | ColumnciscoBfdSessEchoFuncModeDesiredFlag | read-create | current | This object indicates that the local system's desire to use Echo mode. Specifically, it is set to true(1) if the local system wishes to use Echo mode or false(… |
| 1.3.6.1.4.1.9.10.137.1.2.1.12 | ColumnciscoBfdSessControlPlanIndepFlag | read-create | current | This object indicates that the local system's ability to continue to function through a disruption of the control plane. Specifically, it is set to true(1) if … |
| 1.3.6.1.4.1.9.10.137.1.2.1.13 | ColumnciscoBfdSessAddrType | read-create | current | This object specifies IP address type of the neighboring IP address which is being monitored with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) … |
| 1.3.6.1.4.1.9.10.137.1.2.1.14 | ColumnciscoBfdSessAddr | read-create | current | This object specifies the neighboring IP address which is being monitored with this BFD session. It can also be used to enabled BFD on a specific interface. Th… |
| 1.3.6.1.4.1.9.10.137.1.2.1.15 | ColumnciscoBfdSessDesiredMinTxInterval | read-create | current | This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. |
| 1.3.6.1.4.1.9.10.137.1.2.1.16 | ColumnciscoBfdSessReqMinRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. |
| 1.3.6.1.4.1.9.10.137.1.2.1.17 | ColumnciscoBfdSessReqMinEchoRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting. |
| 1.3.6.1.4.1.9.10.137.1.2.1.18 | ColumnciscoBfdSessDetectMult | read-create | current | This object specifies the Detect time multiplier. |
| 1.3.6.1.4.1.9.10.137.1.2.1.19 | ColumnciscoBfdSessStorType | read-create | current | This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in t… |
| 1.3.6.1.4.1.9.10.137.1.2.1.20 | ColumnciscoBfdSessRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row c… |
| 1.3.6.1.4.1.9.10.137.1.2.1.21 | ColumnciscoBfdSessAuthPresFlag | read-create | current | This object indicates that the local system's desire to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be aut… |
| 1.3.6.1.4.1.9.10.137.1.2.1.22 | ColumnciscoBfdSessAuthenticationType | read-create | current | The Authentication Type used for this BFD session. This field is valid only when the Authentication Present bit is set |
| 1.3.6.1.4.1.9.10.137.1.2.1.23 | ColumnciscoBfdSessVersionNumber | read-only | current | The version number of the BFD protocol that this session is running in. |
| 1.3.6.1.4.1.9.10.137.1.2.1.24 | ColumnciscoBfdSessType | read-only | current | The type of this BFD session. |
| 1.3.6.1.4.1.9.10.137.1.2.1.25 | ColumnciscoBfdSessInterface | read-only | current | This object contains an interface index used to indicate the interface which this BFD session is running on. |
| 1.3.6.1.4.1.9.10.137.1.3 | TableciscoBfdSessPerfTable | not-accessible | current | This table specifies BFD Session performance counters. |
| 1.3.6.1.4.1.9.10.137.1.3.1 | RowciscoBfdSessPerfEntry | not-accessible | current | An entry in this table is created by a BFD-enabled node for every BFD Session. ciscoBfdCounterDiscontinuityTime is used to indicate potential discontinuity for… |
| 1.3.6.1.4.1.9.10.137.1.3.1.1 | ColumnciscoBfdSessPerfPktIn | read-only | current | The total number of BFD messages received for this BFD session. |
| 1.3.6.1.4.1.9.10.137.1.3.1.2 | ColumnciscoBfdSessPerfPktOut | read-only | current | The total number of BFD messages sent for this BFD session. |
| 1.3.6.1.4.1.9.10.137.1.3.1.3 | ColumnciscoBfdSessUpTime | read-only | current | The value of sysUpTime on the most recent occasion at which the session came up. If no such up event exists this object contains a zero value. |
| 1.3.6.1.4.1.9.10.137.1.3.1.4 | ColumnciscoBfdSessPerfLastSessDownTime | read-only | current | The value of sysUpTime on the most recent occasion at which the last time communication was lost with the neighbor. If no such down event exist this object con… |
| 1.3.6.1.4.1.9.10.137.1.3.1.5 | ColumnciscoBfdSessPerfLastCommLostDiag | read-only | current | The BFD diag code for the last time communication was lost with the neighbor. If no such down event exists this object contains a zero value. |
| 1.3.6.1.4.1.9.10.137.1.3.1.6 | ColumnciscoBfdSessPerfSessUpCount | read-only | current | The number of times this session has gone into the Up state since the router last rebooted. |
| 1.3.6.1.4.1.9.10.137.1.3.1.7 | ColumnciscoBfdSessPerfDiscTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of the session counters suffered a discontinuity. The relevant counters are the spe… |
| 1.3.6.1.4.1.9.10.137.1.3.1.8 | ColumnciscoBfdSessPerfPktInHC | read-only | current | This value represents the total number of BFD messages received for this BFD session. It MUST be equal to the least significant 32 bits of ciscoBfdSessPerfPktI… |
| 1.3.6.1.4.1.9.10.137.1.3.1.9 | ColumnciscoBfdSessPerfPktOutHC | read-only | current | This value represents the total number of total number of BFD messages transmitted for this BFD session. It MUST be equal to the least significant 32 bits of c… |
| 1.3.6.1.4.1.9.10.137.1.4 | TableciscoBfdSessMapTable | not-accessible | current | The BFD Session Mapping Table maps the complex indexing of the BFD sessions to the flat CiscoBfdSessIndexTC used in the ciscoBfdSessTable. |
| 1.3.6.1.4.1.9.10.137.1.4.1 | RowciscoBfdSessMapEntry | not-accessible | current | The BFD Session Entry describes BFD session that is mapped to this index. |
| 1.3.6.1.4.1.9.10.137.1.4.1.1 | ColumnciscoBfdSessMapBfdIndex | read-only | current | This object indicates the CiscoBfdSessIndexTC referred to by the indices of this row. In essence, a mapping is provided between these indices and the ciscoBfdS… |
| 1.3.6.1.4.1.9.10.137.1.5 | TableciscoBfdSessDiscMapTable | not-accessible | current | The BFD Session Discriminator Mapping Table maps a local discriminator value to associated BFD sessions' CiscoBfdSessIndexTC used in the ciscoBfdSessTable. |
| 1.3.6.1.4.1.9.10.137.1.5.1 | RowciscoBfdSessDiscMapEntry | not-accessible | current | Each row contains a mapping between a local discriminator value to an entry in ciscoBfdSessTable. |
| 1.3.6.1.4.1.9.10.137.1.5.1.1 | ColumnciscoBfdSessDiscMapIndex | read-only | current | This object indicates the CiscoBfdSessIndexTC referred to by the index of this row. In essence, a mapping is provided between this index and the ciscoBfdSessTa… |
| 1.3.6.1.4.1.9.10.137.1.6 | TableciscoBfdSessIpMapTable | not-accessible | current | The BFD Session IP Mapping Table maps given ciscoBfdSessInterface, ciscoBfdSessAddrType, and ciscoBbfdSessAddr to an associated BFD sessions' CiscoBfdSessIndex… |
| 1.3.6.1.4.1.9.10.137.1.6.1 | RowciscoBfdSessIpMapEntry | not-accessible | current | Each row contains a mapping between ciscoBfdSessInterface, ciscoBfdSessAddrType and ciscoBfdSessAddr values to an entry in ciscoBfdSessTable. |
| 1.3.6.1.4.1.9.10.137.1.6.1.1 | ColumnciscoBfdSessIpMapIndex | read-only | current | This object indicates the CiscoBfdSessIndexTC referred to by the indices of this row. In essence, a mapping is provided between these indices and an entry in c… |
| 1.3.6.1.4.1.9.10.137.3 | NodeciscoBfdConformance | |||
| 1.3.6.1.4.1.9.10.137.3.1 | NodeciscoBfdGroups | |||
| 1.3.6.1.4.1.9.10.137.3.1.1 | GroupciscoBfdSessionGroup | deprecated | Collection of objects needed for BFD sessions. | |
| 1.3.6.1.4.1.9.10.137.3.1.2 | GroupciscoBfdSessionPerfGroup | current | Collection of objects needed to monitor the performance of BFD sessions. | |
| 1.3.6.1.4.1.9.10.137.3.1.3 | GroupciscoBfdSessionPerfHCGroup | current | Collection of objects needed to monitor the performance of BFD sessions for which the values of ciscoBfdSessPerfPktIn, ciscoBfdSessPerfPktOut wrap around too q… | |
| 1.3.6.1.4.1.9.10.137.3.1.4 | GroupciscoBfdNotificationGroup | current | Set of notifications implemented in this module. | |
| 1.3.6.1.4.1.9.10.137.3.1.5 | GroupciscoBfdSession0304Group | current | Collection of objects needed for BFD sessions for both draft-ietf-bfd-mib-03.txt and draft-ietf-bfd-mib-04.txt. | |
| 1.3.6.1.4.1.9.10.137.3.1.6 | GroupciscoBfdSession03Group | current | Collection of objects needed for BFD sessions to support draft-ietf-bfd-mib-03.txt. | |
| 1.3.6.1.4.1.9.10.137.3.1.7 | GroupciscoBfdSession04Group | current | Collection of objects needed for BFD sessions to support draft-ietf-bfd-mib-04.txt. | |
| 1.3.6.1.4.1.9.10.137.3.2 | NodeciscoBfdCompliances | |||
| 1.3.6.1.4.1.9.10.137.3.2.1 | ComplianceciscoBfdModuleFullCompliance | deprecated | Compliance statement for agents that provide full support for CISCO-IETF-BFD-MIB of draft-ietf-bfd-mib-03.txt. Such devices can then be monitored and also be c… | |
| 1.3.6.1.4.1.9.10.137.3.2.2 | ComplianceciscoBfdModuleFullComplianceRev2 | current | Compliance statement for agents that provide full support for CISCO-IETF-BFD-MIB of draft-ietf-bfd-mib-04.txt. Such devices can then be monitored and also be c… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CiscoBfdDiag | INTEGER { noDiagnostic(0), controlDetectionTimeExpired(1), echoFunctionFailed(2), neighborSignaledSessionDown(3), forwardingPlaneReset(4), pathDown(5), concatenatedPathDown(6), administrativelyDown(7), reverseConcatenatedPathDown(8) } | current | A common BFD diagnostic code. |
| CiscoBfdInterval | Unsigned32 (0..4294967295) | current | The BFD interval delay in microseconds. |
| CiscoBfdSessIndexTC | Unsigned32 (1..4294967295) | current | An index used to uniquely identify BFD sessions. |