MIB Viewer

CISCO-IETF-DOT11-QOS-MIB

45 objects
This MIB module provides network management support for QoS on wireless LAN devices. All objects defined in this MIB are listed (object names have been modified to adopt Cisco MIB object naming convention) in the IEEE 802.11E November 2001 draft. The original names of the objects in the standard are included in the REFERENCE clauses. The standard is still under development. The standard IEEE 802.11E MIB can replace some of the MIB objects in this MIB once the standard is finalized. GLOSSARY and ACRONYMS Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. AIFS Arbitration Interframe Space. It is one of the five different IFSs defined to provide priority levels for access to the wireless media. It shall be used by QSTAs to transmit data type frames (MPDUs) and management type frames (MMPDUs). BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. CW Contention Window. It is the time period between radio signal collisions caused by simultaneous broadcast from multiple wireless stations. The contention window is used to compute the random backoff of the radio broadcast. The IEEE 802.11b does not specify the unit for the time period. CWP Factor Contention Window Persistence Factor. It indicates the factor used in computing new CW values on every 15 unsuccessful attempt to transmit an MPDU or an MMPDU of a traffic category. It is a scaling factor in units of 1/16 ths. IFS Inter-Frame Space is the time interval between frames. A STA shall determine that the medium is idle through the use of the carrier sense function for the interval specified. In other words, the size of the IFS determines the length of the backoff time interval of a device to the medium. In this case, the medium is the radio wave spectrum. The IEEE 802.11b standard does not specify any unit for the time interval. BSS IEEE 802.11 Basic Service Set (Radio Cell). The MAC Medium Access Control. Layer 2 in the network model. MPDU MAC protocol data unit. The unit of data exchanged between two peer MAC entities using the services of the physical layer (PHY). MMPDU Management type MAC protocol data unit. MSDU MAC service data unit. Information that is delivered as a unit between MAC service access points. QBSS Quality of service basic service set. QSTA QoS station. STA (WSTA) A non-AP IEEE 802.11 wireless station.
Imported Objects
CISCO-SMIciscoExperiment
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCTEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.10.89IdentityciscoIetfDot11QosMIBThis MIB module provides network management support for QoS on wireless LAN devices. All objects defined in this MIB are listed (object names have been modifie…
1.3.6.1.4.1.9.10.89.1NodeciscoIetfDot11QosMIBObjects
1.3.6.1.4.1.9.10.89.1.1NodeciscoIetfDot11QosConfig
1.3.6.1.4.1.9.10.89.1.1.1Tablecid11QosConfigTablenot-accessiblecurrentThis table contains the basic set of attributes to configure QoS for a wireless LAN device. This table has a sparse dependent relationship with the ifTable. Ea…
1.3.6.1.4.1.9.10.89.1.1.1.1Rowcid11QosConfigEntrynot-accessiblecurrentEach entry contains parameters to configure traffic contention window, AIFS, priority and MSDU lifetime for each traffic category on an IEEE 802.11 interface.
1.3.6.1.4.1.9.10.89.1.1.1.1.1Columncid11TrafficCategorynot-accessiblecurrentThis object specifies the traffic category.
1.3.6.1.4.1.9.10.89.1.1.1.1.2Columncid11CWminread-writecurrentThis specifies the minimum contention window value for a traffic category. The backoff interval of a radio is calculated from a pseudo random integer drawn fro…
1.3.6.1.4.1.9.10.89.1.1.1.1.3Columncid11CWmaxread-writecurrentThis object specifies the maximum contention window value for a traffic category. The backoff interval of a radio is calculated from a pseudo random integer dr…
1.3.6.1.4.1.9.10.89.1.1.1.1.4Columncid11CWPFactorread-writecurrentThis object specifies the contention window persistence factor for a traffic category.
1.3.6.1.4.1.9.10.89.1.1.1.1.5Columncid11AIFSread-writecurrentThis object specifies the AIFS for a traffic category.
1.3.6.1.4.1.9.10.89.1.1.1.1.6Columncid11TrafficPriorityread-writecurrentThis object specifies the actual priority this agent is going to use to delivery packets for a traffic category. This allows multiple traffic categories to map…
1.3.6.1.4.1.9.10.89.1.1.1.1.7Columncid11MSDULifetimeread-writecurrentThis object specifies the MSDU lifetime for a traffic category.
1.3.6.1.4.1.9.10.89.1.1.2Tablecid11QosSupportTablenot-accessiblecurrentThis table contains the attributes indicating QoS support information on the IEEE 802.11 interfaces of the device. This table has a sparse dependent relationsh…
1.3.6.1.4.1.9.10.89.1.1.2.1Rowcid11QosSupportEntrynot-accessiblecurrentEach entry contains attributes to indicate if Qos and priority queue are supported for an IEEE 802.11 interface.
1.3.6.1.4.1.9.10.89.1.1.2.1.1Columncid11QosOptionImplementedread-onlycurrentThis object indicates if QoS is supported on this IEEE 802.11 network interface.
1.3.6.1.4.1.9.10.89.1.1.2.1.2Columncid11QueuesAvailableread-onlycurrentThis object shows the number of QoS priority queues are available on this IEEE 802.11 network interface.
1.3.6.1.4.1.9.10.89.1.2NodeciscoIetfDot11QosQueue
1.3.6.1.4.1.9.10.89.1.2.1Tablecid11QueueTablenot-accessiblecurrentThis table contains the queue weight and size information and statistics for each traffic category on each the IEEE 802.11 interface. This table has a sparse d…
1.3.6.1.4.1.9.10.89.1.2.1.1Rowcid11QueueEntrynot-accessiblecurrentEach entry contains the current queue weight, size, and peak size information for each traffic category on an IEEE 802.11 interface.
1.3.6.1.4.1.9.10.89.1.2.1.1.1Columncid11QueueSizeread-onlycurrentThis is the current QoS priority queue size for the traffic category.
1.3.6.1.4.1.9.10.89.1.2.1.1.2Columncid11QueuePeakSizeread-onlycurrentThis is the peak QoS priority queue size for the traffic category.
1.3.6.1.4.1.9.10.89.1.3NodeciscoIetfDot11QosStatistics
1.3.6.1.4.1.9.10.89.1.3.1Tablecid11QosStatisticsTablenot-accessiblecurrentThis table contains the QoS statistics by traffic category on each the IEEE 802.11 network interface. This table has a sparse dependent relationship with the i…
1.3.6.1.4.1.9.10.89.1.3.1.1Rowcid11QosStatisticsEntrynot-accessiblecurrentEach entry contain QoS statistics for data transmission and receive for each traffic category on an IEEE 802.11 interface.
1.3.6.1.4.1.9.10.89.1.3.1.1.1Columncid11QosReceivedMPDUsread-onlycurrentThis is the counter for QoS MPDUs received on this IEEE 802.11 interface for the traffic category.
1.3.6.1.4.1.9.10.89.1.3.1.1.2Columncid11QosReceivedRetriesread-onlycurrentThis is the counter for Qos retries received on this IEEE 802.11 interface for the traffic category.
1.3.6.1.4.1.9.10.89.1.3.1.1.3Columncid11QosDiscardedFramesread-onlycurrentThis is the counter for Qos discarded frames transmitting from this IEEE 802.11 interface for the traffic category.
1.3.6.1.4.1.9.10.89.1.3.1.1.4Columncid11QosTransmittedFragmentsread-onlycurrentThis is the counter for Qos fragments transmitted this IEEE 802.11 interface for the traffic category.
1.3.6.1.4.1.9.10.89.1.3.1.1.5Columncid11QosFailsread-onlycurrentThis is the counter for Qos failures on this IEEE 802.11 interface for the traffic category.
1.3.6.1.4.1.9.10.89.1.3.1.1.6Columncid11QosRetriesread-onlycurrentThis is the counter for Qos retries performed on this IEEE 802.11 interface for the traffic category.
1.3.6.1.4.1.9.10.89.1.3.1.1.7Columncid11QosMutipleRetriesread-onlycurrentThis is the counter for Qos multiple retries performed on this IEEE 802.11 interface for the traffic category.
1.3.6.1.4.1.9.10.89.1.3.1.1.8Columncid11QosFrameDuplicatesread-onlycurrentThis is the counter for Qos frame duplications performed on this IEEE 802.11 interface for the traffic category.
1.3.6.1.4.1.9.10.89.1.3.1.1.9Columncid11QosReceivedFragmentsread-onlycurrentThis is the counter for Qos fragments received on this IEEE 802.11 interface for the traffic category.
1.3.6.1.4.1.9.10.89.1.3.1.1.10Columncid11QosTransmittedFramesread-onlycurrentThis is the counter for Qos frames transmitted from this IEEE 802.11 interface for the traffic category.
1.3.6.1.4.1.9.10.89.1.3.2Tablecid11QosIfStatisticsTablenot-accessiblecurrentThis table contains the attributes indicating QoS statistics on the IEEE 802.11 interfaces of the device. This table has a sparse dependent relationship with t…
1.3.6.1.4.1.9.10.89.1.3.2.1Rowcid11QosIfStatisticsEntrynot-accessiblecurrentEach entry contains attributes to support QoS statistics on an IEEE 802.11 interface.
1.3.6.1.4.1.9.10.89.1.3.2.1.1Columncid11QosIfDiscardedFragmentsread-onlycurrentThis object counts the number of QoS discarded transmitting fragments.
1.3.6.1.4.1.9.10.89.2NodeciscoIetfDot11QosMIBConformance
1.3.6.1.4.1.9.10.89.2.1NodeciscoIetfDot11QosMIBCompliances
1.3.6.1.4.1.9.10.89.2.1.1ComplianceciscoIetfDot11QosMIBCompliancecurrentThe compliance statement for the configuration and status groups.
1.3.6.1.4.1.9.10.89.2.2NodeciscoIetfDot11QosMIBGroups
1.3.6.1.4.1.9.10.89.2.2.1GroupciscoIetfDot11QosConfigGroupcurrentConfigurations for IEEE 802.11 QoS.
1.3.6.1.4.1.9.10.89.2.2.2GroupciscoIetfDot11QosQueueGroupcurrentConfigurations and statistics for IEEE 802.11 QoS queue.
1.3.6.1.4.1.9.10.89.2.2.3GroupciscoIetfDot11QosStatsGroupcurrentStatus and statistics for IEEE 802.11 QoS.
Type Definitions
NameSyntaxStatusDescription
Cid11QosTrafficCategoryINTEGER { bestEffort(0), background(1), spare(2), excellentEffort(3), controlledLoad(4), interactiveVideo(5), interactiveVoice(6), networkControl(7) }currentThis is the 802.1D IP traffic category. There are a total of 8 categories. Each category can be mapped to a 802.1P priority level of IP packets. The priority levels are implemented using the Precedence Bits in the IP pa…