CISCO-IETF-MEGACO-MIB
76 objects
This MIB module is based on the Internet Draft draft-ietf-megaco-mib-05.txt. It defines the attributes of Megaco protocol. Reference: ITU H.248 (Rev. COM16-107).
Imported Objects
| CISCO-SMI | ciscoExperiment |
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | AutonomousType RowStatus TestAndIncr TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.99999 | IdentityciscoIetfMegacoMIB | This MIB module is based on the Internet Draft draft-ietf-megaco-mib-05.txt. It defines the attributes of Megaco protocol. Reference: ITU H.248 (Rev. COM16-107… | ||
| 1.3.6.1.4.1.9.10.99999.0 | NodeciscoIetfMegacoMIBNotifs | |||
| 1.3.6.1.4.1.9.10.99999.1 | NodeciscoIetfMegacoMIBObjects | |||
| 1.3.6.1.4.1.9.10.99999.1.1 | NodecmedConfiguration | |||
| 1.3.6.1.4.1.9.10.99999.1.1.1 | TablecmedLinkIdTable | not-accessible | current | This table contains a nextLinkId for each Gateway. It provides the manager with the nextLinkId for use in creating new Gateway Table Entries. |
| 1.3.6.1.4.1.9.10.99999.1.1.1.1 | RowcmedLinkIdEntry | not-accessible | current | This table contains the NextLinkId for this Gateway and is indexed by mediaGatewayId. |
| 1.3.6.1.4.1.9.10.99999.1.1.1.1.1 | ColumncmedNextLinkId | read-write | current | The Next Value for a cmedGatewayLinkId. Assists the manager in selecting a value for cmedGatewayLinkId. Using the TestAndIncr syntax, A Manager will 'lock' thi… |
| 1.3.6.1.4.1.9.10.99999.1.1.2 | TablecmedGatewayConfigTable | not-accessible | current | A list of cmedGatewayConfigEntry objects. |
| 1.3.6.1.4.1.9.10.99999.1.1.2.1 | RowcmedGatewayConfigEntry | not-accessible | current | Entry holding configuration information about a group of Media Gateway Controllers sharing the same signaling link. |
| 1.3.6.1.4.1.9.10.99999.1.1.2.1.1 | ColumncmedGatewayId | not-accessible | current | The unique Media Gateway Id which identifies this media gateway |
| 1.3.6.1.4.1.9.10.99999.1.1.2.1.2 | ColumncmedGatewayLinkId | not-accessible | current | The unique link id which identifies the signaling link that this gateway uses to communicate with the Gateway Controllers to form an H.248 association. |
| 1.3.6.1.4.1.9.10.99999.1.1.2.1.3 | ColumncmedGatewayLinkName | read-create | current | A descriptive name of this signaling link / media gateway combination |
| 1.3.6.1.4.1.9.10.99999.1.1.2.1.4 | ColumncmedGatewayIPAddress | read-create | current | The IP address that the Media Gateway Controller will use to communicate with the Media Gateway. This object reflects the IP address over control PVC that user… |
| 1.3.6.1.4.1.9.10.99999.1.1.2.1.5 | ColumncmedGatewayPort | read-create | current | TCP/UDP port number that the Media Gateway Controller will use to communicate with the Media Gateway. The value 0 is returned if the entry is invalid. |
| 1.3.6.1.4.1.9.10.99999.1.1.2.1.6 | ColumncmedGatewayEncodingScheme | read-create | current | The encoding scheme that would be used to encode the H.248 messages that are sent/received to/from the gateway controller |
| 1.3.6.1.4.1.9.10.99999.1.1.2.1.7 | ColumncmedGatewayProtocol | read-create | current | Type of the control protocol in use notApplicable (1) - other (2) - Other (none from the list below) dss1-ip (3) - Q931+ ipdc (4) - IPDC megacov1 (5) - MEGACO/… |
| 1.3.6.1.4.1.9.10.99999.1.1.2.1.8 | ColumncmedGatewaySigTptProtocol | read-create | current | Type of the transport protocol that is being used to transport the H.248 signaling traffic |
| 1.3.6.1.4.1.9.10.99999.1.1.2.1.9 | ColumncmedGatewayAdminStatus | read-create | current | The desired state of the gateway. The testing(3) state indicates that no signaling packets can be passed. When a managed system initializes, all gateways start… |
| 1.3.6.1.4.1.9.10.99999.1.1.2.1.10 | ColumncmedGatewayOperStatus | read-only | current | The current operational state of the gateway. up (1) - ready to communicate with MGC down (2) testing(3) - in some test mode unknown(4) - status can not be det… |
| 1.3.6.1.4.1.9.10.99999.1.1.2.1.11 | ColumncmedGatewayLastStatusChange | read-only | current | The value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re-initializ… |
| 1.3.6.1.4.1.9.10.99999.1.1.2.1.12 | ColumncmedGatewayResetStatistics | read-create | current | This object can be used to reset all statistics collected for this media gateway link so far. Statistics will be reset when the object is SET to 'reset'. Upon … |
| 1.3.6.1.4.1.9.10.99999.1.1.2.1.13 | ColumncmedGatewayRowStatus | read-create | current | This is used to create new rows, modify existing rows and to delete existing rows. |
| 1.3.6.1.4.1.9.10.99999.1.1.3 | TablecmedGwyControllerTable | not-accessible | current | List of the Media Gateway Controllers that are managed in the network |
| 1.3.6.1.4.1.9.10.99999.1.1.3.1 | RowcmedGwyControllerEntry | not-accessible | current | Entry holding information about an individual Media Gateway Controller. |
| 1.3.6.1.4.1.9.10.99999.1.1.3.1.1 | ColumncmedGwyControllerId | not-accessible | current | An unique identification number that is assigned to the gateway controller by the manager |
| 1.3.6.1.4.1.9.10.99999.1.1.3.1.2 | ColumncmedGwyControllerIPAddress | read-write | current | The IP address of the Media Gateway Controller. The value 0.0.0.0 is returned if the entry is invalid. |
| 1.3.6.1.4.1.9.10.99999.1.1.3.1.3 | ColumncmedGwyControllerPort | read-write | current | TCP port of the Media Gateway Controller. The value 0 is returned if the entry is invalid. |
| 1.3.6.1.4.1.9.10.99999.1.1.3.1.4 | ColumncmedGwyControllerAdminStatus | read-write | current | The desired state of the gateway. The testing(3) state indicates that no signaling packets can be passed. When a managed system initializes, all gateways start… |
| 1.3.6.1.4.1.9.10.99999.1.1.3.1.5 | ColumncmedGwyControllerOperStatus | read-only | current | The current operational state of the gateway controller. The standby(3) state indicates that it is in the standby mode and no signaling packets can be passed. … |
| 1.3.6.1.4.1.9.10.99999.1.2 | NodecmedStatistics | |||
| 1.3.6.1.4.1.9.10.99999.1.2.1 | TablecmedGatewayStatsTable | not-accessible | current | A list of mediaGatewayTableEntry objects. |
| 1.3.6.1.4.1.9.10.99999.1.2.1.1 | RowcmedGatewayStatsEntry | not-accessible | current | Entry holding statistics about a group of media Gateway/signaling link pair |
| 1.3.6.1.4.1.9.10.99999.1.2.1.1.1 | ColumncmedNumInMessages | read-only | current | Total number of messages received on the link. |
| 1.3.6.1.4.1.9.10.99999.1.2.1.1.2 | ColumncmedNumInOctets | read-only | current | Total number of octets received on the link. |
| 1.3.6.1.4.1.9.10.99999.1.2.1.1.3 | ColumncmedNumOutMessages | read-only | current | Total number of messages sent on the link. |
| 1.3.6.1.4.1.9.10.99999.1.2.1.1.4 | ColumncmedNumOutOctets | read-only | current | Total number of octets sent on the link. |
| 1.3.6.1.4.1.9.10.99999.1.2.1.1.5 | ColumncmedNumErrors | read-only | current | Total number of signaling-level errors encountered. Includes, but is not limited to, number of bad messages received, number of failures to sent a message and … |
| 1.3.6.1.4.1.9.10.99999.1.2.1.1.6 | ColumncmedNumTimerRecovery | read-only | current | Total Number of timer recovery events since the statistics was last reset. This reflects all protocol timers that are supported (For H.248, T - start timer, S … |
| 1.3.6.1.4.1.9.10.99999.1.2.1.1.7 | ColumncmedTransportNumLosses | read-only | current | Number of times a transport link was lost (excluding switch-over cases). A link loss is defined as loss of communication with the entity (MGC) due to hardware/… |
| 1.3.6.1.4.1.9.10.99999.1.2.1.1.8 | ColumncmedTransportNumSwitchover | read-only | current | Number of times when the signaling was switched over to an alternative link. This includes switchover due to the Handoffs initiated by the gateway controllers |
| 1.3.6.1.4.1.9.10.99999.1.2.1.1.9 | ColumncmedTransportTotalNumAlarms | read-only | current | Total number of all alarms issued for the transport layer. |
| 1.3.6.1.4.1.9.10.99999.1.2.1.1.10 | ColumncmedTransportLastEvent | read-only | current | Last event reported by the transport layer. notApplicable (1) - Invalid/unknown. other (2) - None from the list below. linkUp (3) - Transport link is up. linkL… |
| 1.3.6.1.4.1.9.10.99999.1.2.1.1.11 | ColumncmedTransportLastEventTime | read-only | current | The value of sysUpTime at the time when the event specified by cmedTransportLastEvent occurred. If the last event occurred prior to the last re-initialization … |
| 1.3.6.1.4.1.9.10.99999.1.2.1.1.12 | ColumncmedLastStatisticsReset | read-only | current | The value of sysUpTime at the time when the statistics were reset. If the reset occurred prior to the last re-initialization of the local network management su… |
| 1.3.6.1.4.1.9.10.99999.1.3 | NodecmedConnections | |||
| 1.3.6.1.4.1.9.10.99999.1.3.1 | TablecmedTermIdTable | not-accessible | current | This table contains a nextTerminationId for each Gateway. It provides the manager with the nextTerminationId for use in creating a new TerminationsTable Entry. |
| 1.3.6.1.4.1.9.10.99999.1.3.1.1 | RowcmedTermIdEntry | not-accessible | current | This table contains a nextTerminationId for each Gateway, and is indexed by mediaGatewayId. |
| 1.3.6.1.4.1.9.10.99999.1.3.1.1.1 | ColumncmedNextTerminationId | read-write | current | The Next Value for a MediaGateway TerminationId. Assists the manager in selecting a value for cmedTermId. Using the TestAndIncr syntax, A Manager will 'lock' t… |
| 1.3.6.1.4.1.9.10.99999.1.3.2 | TablecmedTerminationsTable | not-accessible | current | This table contains information about terminations in a media gateway. It is a list of terminations. The number of entries equals to the total number of termin… |
| 1.3.6.1.4.1.9.10.99999.1.3.2.1 | RowcmedTerminationsEntry | not-accessible | current | It contains objects that describe a termination. |
| 1.3.6.1.4.1.9.10.99999.1.3.2.1.1 | ColumncmedTermId | not-accessible | current | An unique identification number that is assigned to the termination by a media gateway. This is the TerminationId that would be used in the protocol messages t… |
| 1.3.6.1.4.1.9.10.99999.1.3.2.1.2 | ColumncmedTermName | read-create | current | A descriptive name that would describe this termination and its use. For example, 'emergency-ds0-1' indicating that this termination is reserved as an emergenc… |
| 1.3.6.1.4.1.9.10.99999.1.3.2.1.3 | ColumncmedTermAdminStatus | read-create | current | The desired state of the termination. The testing(3) state indicates that no connections can be created for this termination. When a managed system initializes… |
| 1.3.6.1.4.1.9.10.99999.1.3.2.1.4 | ColumncmedTermOperStatus | read-only | current | The current operational state of the termination. The testing(3) state indicates that it is in the testing mode and no connections can be created on it. If cme… |
| 1.3.6.1.4.1.9.10.99999.1.3.2.1.5 | ColumncmedTermInterfaceIdentifier | read-create | current | A number that uniquely identifies the interface in the physical gateway. This is the ifIndex in the ifTable, that this termination would be using to communicat… |
| 1.3.6.1.4.1.9.10.99999.1.3.2.1.6 | ColumncmedTermPropertyProfileId | read-create | current | This determines the profile of the termination which determines what kind of capabilities this termination has. This is an index into the cmedPropertyProfileTa… |
| 1.3.6.1.4.1.9.10.99999.1.3.2.1.7 | ColumncmedTermRowStatus | read-create | current | This is used to create new rows in this table, Modify existing rows, and to delete existing rows. |
| 1.3.6.1.4.1.9.10.99999.1.3.3 | TablecmedPropertyProfileTable | not-accessible | current | This table contains a list of the properties supported in a Profile. A Manager builds a Profile of properties, then ties each termination to a defined profile |
| 1.3.6.1.4.1.9.10.99999.1.3.3.1 | RowcmedPropertyProfileEntry | not-accessible | current | Each row represents a default property of the Property Profile N-entries per mediaGatewayId/PropertyId, one entry per property. |
| 1.3.6.1.4.1.9.10.99999.1.3.3.1.1 | ColumncmedPropertyProfileId | not-accessible | current | This PropertyProfile Identifier uniquely identifies this set of properties. This is the value each termination would refer, when they would like to support all… |
| 1.3.6.1.4.1.9.10.99999.1.3.3.1.2 | ColumncmedPropertyProfileIndex | not-accessible | current | This is the index to the PropertyProfile This is just a 'counter' through the cmedPropertyProfile Table. ie, property=1 property=2 etc. |
| 1.3.6.1.4.1.9.10.99999.1.3.3.1.3 | ColumncmedPropertyProfileProperty | read-create | current | The Property supported by this Profile. This is an Object ID (OID) defined in a package MIB to identify a Particular property (such as AnalogLines, Tones etc). |
| 1.3.6.1.4.1.9.10.99999.1.3.3.1.4 | ColumncmedPropertyProfileRowStatus | read-create | current | It is used to create new rows in this table, modify existing rows, and to delete existing rows. |
| 1.3.6.1.4.1.9.10.99999.1.4 | NodecmedProperties | |||
| 1.3.6.1.4.1.9.10.99999.3 | NodeciscoIetfMegacoMIBConformance | |||
| 1.3.6.1.4.1.9.10.99999.3.1 | NodecmedCompliances | |||
| 1.3.6.1.4.1.9.10.99999.3.1.1 | CompliancecmedCompliance | current | Compliance statement for entities which implement the CISCO-IETF-MEGACO-MIB. | |
| 1.3.6.1.4.1.9.10.99999.3.2 | NodecmedConfigGroups | |||
| 1.3.6.1.4.1.9.10.99999.3.2.1 | GroupcmedConfig | current | This group contains of all the configuration Information for a Media Gateway. This group is mandatory for any implementation managing a media gateway or a grou… | |
| 1.3.6.1.4.1.9.10.99999.3.2.2 | GroupcmedStatsGroup | current | This group contains of all the statistics Information for a Media Gateway. This group is mandatory for any implementation managing a media gateway or a group o… | |
| 1.3.6.1.4.1.9.10.99999.3.2.3 | GroupcmedGwyControllerGroup | current | This group contains of all the configuration Information for a Media Gateway Controller. This group is mandatory for any implementation managing a media gatewa… | |
| 1.3.6.1.4.1.9.10.99999.3.2.4 | GroupcmedNextIdGroup | current | Agent provides NextId's to the Manager to assist in selecting and creating new table entries. This group is optional for all the implementations. But when it i… | |
| 1.3.6.1.4.1.9.10.99999.3.2.5 | GroupcmedTermGroup | current | This group contains of all the configuration Information for a termination. This group is mandatory for any implementation managing termination. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CMediaGatewayId | INTEGER (1..2147483647) | current | Possible Media Gateway Id that can be used to identify any media gateway uniquely |
| CMediaGatewayLinkId | Unsigned32 (1..2147483647) | current | Possible Media Gateway Link Id that can be used to identify any media gateway link uniquely |
| CMediaGatewayTermId | Unsigned32 (1..2147483647) | current | Possible Termination Id that can be used to identify any media gateway termination uniquely |