CISCO-IETF-NAT-MIB
130 objects
This MIB module defines the generic managed objects for NAT.
Imported Objects
| CISCO-SMI | ciscoExperiment |
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.77 | IdentityciscoIetfNatMIB | This MIB module defines the generic managed objects for NAT. | ||
| 1.3.6.1.4.1.9.10.77.1 | NodeciscoNatMIBObjects | |||
| 1.3.6.1.4.1.9.10.77.1.1 | NodecnatConfig | |||
| 1.3.6.1.4.1.9.10.77.1.1.1 | TablecnatConfTable | not-accessible | current | This table specifies the configuration attributes for a device supporting NAT function. |
| 1.3.6.1.4.1.9.10.77.1.1.1.1 | RowcnatConfEntry | not-accessible | current | Each entry in the cnatConfTable holds a set of configuration parameters associated with an instance of NAT. Entries in the cnatConfTable are created and delete… |
| 1.3.6.1.4.1.9.10.77.1.1.1.1.1 | ColumncnatConfName | not-accessible | current | The locally arbitrary, but unique identifier associated with this cnatConfEntry. |
| 1.3.6.1.4.1.9.10.77.1.1.1.1.2 | ColumncnatConfServiceType | read-create | current | An indication of the direction in which new sessions are permitted and the extent of translation done within the IP and transport headers. |
| 1.3.6.1.4.1.9.10.77.1.1.1.1.3 | ColumncnatConfTimeoutIcmpIdle | read-create | current | The interval of time for which an ICMP protocol session, associated with this configuration, is allowed to remain valid without any activity. |
| 1.3.6.1.4.1.9.10.77.1.1.1.1.4 | ColumncnatConfTimeoutUdpIdle | read-create | current | The interval of time for which a UDP protocol session, associated with this configuration, is allowed to remain valid without any activity. |
| 1.3.6.1.4.1.9.10.77.1.1.1.1.5 | ColumncnatConfTimeoutTcpIdle | read-create | current | The interval of time for which a TCP protocol session, associated with this configuration, is allowed to remain valid without any activity. This timeout value … |
| 1.3.6.1.4.1.9.10.77.1.1.1.1.6 | ColumncnatConfTimeoutTcpNeg | read-create | current | The interval of time for which a TCP protocol session, associated with this configuration, is allowed to remain valid without any activity. This timeout value … |
| 1.3.6.1.4.1.9.10.77.1.1.1.1.7 | ColumncnatConfTimeoutOther | read-create | current | The interval of time for which a protocol session other than ICMP, UDP and TCP, associated with this configuration, is allowed to remain valid, without any act… |
| 1.3.6.1.4.1.9.10.77.1.1.1.1.8 | ColumncnatConfMaxBindLeaseTime | read-create | current | The maximum lease time for the BIND, associated with this configuration. Unless the lease time is renewed, a BIND will not be valid past the lease time. As a s… |
| 1.3.6.1.4.1.9.10.77.1.1.1.1.9 | ColumncnatConfMaxBindIdleTime | read-create | current | The maximum time, associated with this configuration, to allow a dynamic BIND to remain valid with no NAT session hanging off this BIND. By default for NATIVE … |
| 1.3.6.1.4.1.9.10.77.1.1.1.1.10 | ColumncnatConfStorageType | read-create | current | The storage type for this conceptual row. |
| 1.3.6.1.4.1.9.10.77.1.1.1.1.11 | ColumncnatConfStatus | read-create | current | The status of this conceptual row. |
| 1.3.6.1.4.1.9.10.77.1.1.2 | TablecnatConfStaticAddrMapTable | not-accessible | current | This table lists configuration for static NAT entries. This table has an expansion dependent relationship on the cnatConfTable. When an SNMP entity deletes a c… |
| 1.3.6.1.4.1.9.10.77.1.1.2.1 | RowcnatConfStaticAddrMapEntry | not-accessible | current | A description of a static NAT entry. This entry contributes to the static NAT table of the device. |
| 1.3.6.1.4.1.9.10.77.1.1.2.1.1 | ColumncnatConfStaticAddrMapName | not-accessible | current | An arbitrary, but unique identifier associated with this cnatConfStaticAddrMapEntry. The value of this object is unique across both the static address map and … |
| 1.3.6.1.4.1.9.10.77.1.1.2.1.2 | ColumncnatConfStaticAddrMapType | read-create | current | Address (and Transport-ID) maps may be defined for both inbound and outbound direction. Outbound address map refers to mapping a selected set of addresses from… |
| 1.3.6.1.4.1.9.10.77.1.1.2.1.3 | ColumncnatConfStaticLocalAddrFrom | read-create | current | This object specifies the first IP address of the range of IP addresses mapped by this translation entry. |
| 1.3.6.1.4.1.9.10.77.1.1.2.1.4 | ColumncnatConfStaticLocalAddrTo | read-create | current | This object specifies the last IP address of the range of IP addresses mapped by this translation entry. If only a single address being mapped, the value of th… |
| 1.3.6.1.4.1.9.10.77.1.1.2.1.5 | ColumncnatConfStaticLocalPortFrom | read-create | current | If this conceptual row describes a basic NAT, then the value of this object is '0'. If this conceptual row describes NAPT, then the value of this object specif… |
| 1.3.6.1.4.1.9.10.77.1.1.2.1.6 | ColumncnatConfStaticLocalPortTo | read-create | current | If this conceptual row describes a basic NAT, then the value of this object is '0'. If this conceptual row describes NAPT, then the value of this object specif… |
| 1.3.6.1.4.1.9.10.77.1.1.2.1.7 | ColumncnatConfStaticGlobalAddrFrom | read-create | current | This object specifies the first IP address of the range of IP addresses being mapped to. |
| 1.3.6.1.4.1.9.10.77.1.1.2.1.8 | ColumncnatConfStaticGlobalAddrTo | read-create | current | This object specifies the last IP address of the range of IP addresses being mapped to. If only a single address is being mapped to, the value of this object i… |
| 1.3.6.1.4.1.9.10.77.1.1.2.1.9 | ColumncnatConfStaticGlobalPortFrom | read-create | current | If this conceptual row describes a basic NAT, then the value of this object is '0'. If this conceptual row describes NAPT, then the value of this object specif… |
| 1.3.6.1.4.1.9.10.77.1.1.2.1.10 | ColumncnatConfStaticGlobalPortTo | read-create | current | If this conceptual row describes a basic NAT, then the value of this object is '0'. If this conceptual describes NAPT, then the value of this object specifies … |
| 1.3.6.1.4.1.9.10.77.1.1.2.1.11 | ColumncnatConfStaticProtocol | read-create | current | This object specifies a protocol identifier. If the value of this object is '0', then this basic NAT entry applies to all IP traffic. If the value of this obje… |
| 1.3.6.1.4.1.9.10.77.1.1.2.1.12 | ColumncnatConfStaticAddrMapStorageType | read-create | current | The storage type for this conceptual row. |
| 1.3.6.1.4.1.9.10.77.1.1.2.1.13 | ColumncnatConfStaticAddrMapStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). |
| 1.3.6.1.4.1.9.10.77.1.1.3 | TablecnatConfDynAddrMapTable | not-accessible | current | This table lists dynamic NAT entries. This table has an expansion dependent relationship on the cnatConfTable. When an SNMP entity deletes a conceptual row fro… |
| 1.3.6.1.4.1.9.10.77.1.1.3.1 | RowcnatConfDynAddrMapEntry | not-accessible | current | A description of a dynamic NAT entry. This entry contributes to the dynamic NAT table of the device. |
| 1.3.6.1.4.1.9.10.77.1.1.3.1.1 | ColumncnatConfDynAddrMapName | not-accessible | current | An arbitrary, but unique identifier associated with this cnatConfDynAddrMapEntry. The value of this object is unique across both the static address map and the… |
| 1.3.6.1.4.1.9.10.77.1.1.3.1.2 | ColumncnatConfDynAddressMapType | read-create | current | Address (and Transport-ID) maps may be defined for both inbound and outbound direction. Outbound address map refers to mapping a selected set of addresses from… |
| 1.3.6.1.4.1.9.10.77.1.1.3.1.3 | ColumncnatConfDynLocalAddrFrom | read-create | current | This object specifies the first IP address of the range of IP addresses mapped by this translation entry. |
| 1.3.6.1.4.1.9.10.77.1.1.3.1.4 | ColumncnatConfDynLocalAddrTo | read-create | current | This object specifies the last IP address of the range of IP addresses mapped by this translation entry. |
| 1.3.6.1.4.1.9.10.77.1.1.3.1.5 | ColumncnatConfDynLocalPortFrom | read-create | current | If this conceptual row describes a basic NAT, then the value of this object is '0'. If this conceptual row describes NAPT, then the value of this object specif… |
| 1.3.6.1.4.1.9.10.77.1.1.3.1.6 | ColumncnatConfDynLocalPortTo | read-only | current | If this conceptual row describes a basic NAT, then the value of this object is '0'. If this conceptual row describes NAPT, then the value of this object specif… |
| 1.3.6.1.4.1.9.10.77.1.1.3.1.7 | ColumncnatConfDynGlobalAddrFrom | read-create | current | This object specifies the first IP address of the range of IP addresses being mapped to. |
| 1.3.6.1.4.1.9.10.77.1.1.3.1.8 | ColumncnatConfDynGlobalAddrTo | read-create | current | This object specifies the last IP address of the range of IP addresses being mapped to. |
| 1.3.6.1.4.1.9.10.77.1.1.3.1.9 | ColumncnatConfDynGlobalPortFrom | read-create | current | If this conceptual row describes a basic NAT, then the value of this object is '0'. If this conceptual row describes NAPT, then the value of this object specif… |
| 1.3.6.1.4.1.9.10.77.1.1.3.1.10 | ColumncnatConfDynGlobalPortTo | read-create | current | If this conceptual row describes a basic NAT, then the value of this object is '0'. If this conceptual row describes NAPT, then the value of this object specif… |
| 1.3.6.1.4.1.9.10.77.1.1.3.1.11 | ColumncnatConfDynProtocol | read-create | current | This object specifies a protocol identifier. If the value of this object is '0', then this basic NAT entry applies to all IP traffic. If the value of this obje… |
| 1.3.6.1.4.1.9.10.77.1.1.3.1.12 | ColumncnatConfDynAddrMapStorageType | read-create | current | The storage type for this conceptual row. |
| 1.3.6.1.4.1.9.10.77.1.1.3.1.13 | ColumncnatConfDynAddrMapStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). |
| 1.3.6.1.4.1.9.10.77.1.1.4 | TablecnatInterfaceTable | not-accessible | current | This table holds information regarding the interface on which NAT is enabled. |
| 1.3.6.1.4.1.9.10.77.1.1.4.1 | RowcnatInterfaceEntry | not-accessible | current | Each entry in the NAT Interface Table holds information regarding an interface on which NAT is enabled. |
| 1.3.6.1.4.1.9.10.77.1.1.4.1.1 | ColumncnatInterfaceIndex | not-accessible | current | The ifIndex of the interface on which NAT is enabled. |
| 1.3.6.1.4.1.9.10.77.1.1.4.1.2 | ColumncnatInterfaceRealm | read-create | current | This object identifies whether this interface is connected to the private or the public realm. |
| 1.3.6.1.4.1.9.10.77.1.1.4.1.3 | ColumncnatInterfaceStorageType | read-create | current | The storage type for this conceptual row. |
| 1.3.6.1.4.1.9.10.77.1.1.4.1.4 | ColumncnatInterfaceStatus | read-create | current | Status of NAT on this interface. An active status indicates that NAT is enabled on this interface. |
| 1.3.6.1.4.1.9.10.77.1.2 | NodecnatBind | |||
| 1.3.6.1.4.1.9.10.77.1.2.1 | ScalarcnatAddrBindNumberOfEntries | read-only | current | This object maintains a count of the number of entries that currently exist in the cnatAddrBindTable. |
| 1.3.6.1.4.1.9.10.77.1.2.2 | TablecnatAddrBindTable | not-accessible | current | This table holds information about the currently active NAT BINDs. |
| 1.3.6.1.4.1.9.10.77.1.2.2.1 | RowcnatAddrBindEntry | not-accessible | current | Each entry in the NAT BIND table holds information about a NAT BIND that is currently active. |
| 1.3.6.1.4.1.9.10.77.1.2.2.1.1 | ColumncnatAddrBindLocalAddr | not-accessible | current | This object represents the private-realm specific network layer address, which maps to the public-realm address represented by cnatAddrBindGlobalAddr. |
| 1.3.6.1.4.1.9.10.77.1.2.2.1.2 | ColumncnatAddrBindGlobalAddr | read-only | current | This object represents the public-realm network layer address that maps to the private-realm network layer address represented by cnatAddrBindLocalAddr. |
| 1.3.6.1.4.1.9.10.77.1.2.2.1.3 | ColumncnatAddrBindId | read-only | current | This object represents a BIND id that is dynamically assigned to each BIND by a NAT enabled device. Each BIND is represented by a unique BIND id across both, t… |
| 1.3.6.1.4.1.9.10.77.1.2.2.1.4 | ColumncnatAddrBindDirection | read-only | current | This object represents the direction of the BIND. A BIND may be either uni-directional or bi-directional, same as the orientation of the address map, based on … |
| 1.3.6.1.4.1.9.10.77.1.2.2.1.5 | ColumncnatAddrBindType | read-only | current | This object indicates whether the BIND is static or dynamic. |
| 1.3.6.1.4.1.9.10.77.1.2.2.1.6 | ColumncnatAddrBindConfName | read-only | current | This object is a pointer to the cnatConfTable entry (and the parameters of that entry) which was used in creating this BIND. |
| 1.3.6.1.4.1.9.10.77.1.2.2.1.7 | ColumncnatAddrBindSessionCount | read-only | current | Number of sessions currently using this BIND. |
| 1.3.6.1.4.1.9.10.77.1.2.2.1.8 | ColumncnatAddrBindCurrentIdleTime | read-only | current | At any given instance of time, this object indicates the time that this BIND has been idle with no sessions attached to it. The value represented by this objec… |
| 1.3.6.1.4.1.9.10.77.1.2.2.1.9 | ColumncnatAddrBindInTranslate | read-only | current | The number of inbound packets that were translated as per this BIND entry. |
| 1.3.6.1.4.1.9.10.77.1.2.2.1.10 | ColumncnatAddrBindOutTranslate | read-only | current | The number of outbound packets that were translated as per this BIND entry. |
| 1.3.6.1.4.1.9.10.77.1.2.3 | ScalarcnatAddrPortBindNumberOfEntries | read-only | current | This object maintains a count of the number of entries that currently exist in the cnatAddrPortBindTable. |
| 1.3.6.1.4.1.9.10.77.1.2.4 | TablecnatAddrPortBindTable | not-accessible | current | This table holds information about the currently active NAPT BINDs. |
| 1.3.6.1.4.1.9.10.77.1.2.4.1 | RowcnatAddrPortBindEntry | not-accessible | current | Each entry in the this table holds information a NAPT BIND that is currently active. |
| 1.3.6.1.4.1.9.10.77.1.2.4.1.1 | ColumncnatAddrPortBindLocalAddr | not-accessible | current | This object represents the private-realm specific network layer address which, in conjunction with cnatAddrPortBindLocalPort, maps to the public-realm network … |
| 1.3.6.1.4.1.9.10.77.1.2.4.1.2 | ColumncnatAddrPortBindLocalPort | not-accessible | current | This object represents the private-realm specific port number (or query ID in case of ICMP messages) which, in conjunction with cnatAddrPortBindLocalAddr, maps… |
| 1.3.6.1.4.1.9.10.77.1.2.4.1.3 | ColumncnatAddrPortBindProtocol | not-accessible | current | This object specifies a protocol identifier. If the value of this object is '0', then this BIND entry applies to all IP traffic. If the value of this object is… |
| 1.3.6.1.4.1.9.10.77.1.2.4.1.4 | ColumncnatAddrPortBindGlobalAddr | read-only | current | This object represents the public-realm specific network layer address that, in conjunction with cnatAddrPortBindGlobalPort, maps to the private-realm network … |
| 1.3.6.1.4.1.9.10.77.1.2.4.1.5 | ColumncnatAddrPortBindGlobalPort | read-only | current | This object represents the port number (or query id in case of ICMP) that, in conjunction with cnatAddrPortBindGlobalAddr, maps to the private-realm network la… |
| 1.3.6.1.4.1.9.10.77.1.2.4.1.6 | ColumncnatAddrPortBindId | read-only | current | This object represents a BIND id that is dynamically assigned to each BIND by a NAT enabled device. Each BIND is represented by a unique BIND id across both, t… |
| 1.3.6.1.4.1.9.10.77.1.2.4.1.7 | ColumncnatAddrPortBindDirection | read-only | current | This object represents the direction of the BIND. A BIND may be either uni-directional or bi-directional, same as the orientation of the address map, based on … |
| 1.3.6.1.4.1.9.10.77.1.2.4.1.8 | ColumncnatAddrPortBindType | read-only | current | This object indicates whether the BIND is static or dynamic. |
| 1.3.6.1.4.1.9.10.77.1.2.4.1.9 | ColumncnatAddrPortBindConfName | read-only | current | This object is a pointer to the cnatConfTable entry (and the parameters of that entry) which was used in creating this BIND. |
| 1.3.6.1.4.1.9.10.77.1.2.4.1.10 | ColumncnatAddrPortBindSessionCount | read-only | current | Number of sessions currently using this BIND. |
| 1.3.6.1.4.1.9.10.77.1.2.4.1.11 | ColumncnatAddrPortBindCurrentIdleTime | read-only | current | At any given instance of time, this object indicates the time that this BIND has been idle with no sessions attached to it. The value represented by this objec… |
| 1.3.6.1.4.1.9.10.77.1.2.4.1.12 | ColumncnatAddrPortBindInTranslate | read-only | current | The number of inbound packets that were translated as per this BIND entry. |
| 1.3.6.1.4.1.9.10.77.1.2.4.1.13 | ColumncnatAddrPortBindOutTranslate | read-only | current | The number of outbound packets that were translated as per this BIND entry. |
| 1.3.6.1.4.1.9.10.77.1.2.5 | TablecnatSessionTable | not-accessible | current | The (conceptual) table containing one entry for each NAT session currently active on this NAT device. |
| 1.3.6.1.4.1.9.10.77.1.2.5.1 | RowcnatSessionEntry | not-accessible | current | An entry (conceptual row) containing information about an active NAT session on this NAT device. |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.1 | ColumncnatSessionBindId | not-accessible | current | This object represents a BIND id that is dynamically assigned to each BIND by a NAT enabled device. This bind id is that same as represented by the BindId obje… |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.2 | ColumncnatSessionId | not-accessible | current | The session ID for this NAT session. |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.3 | ColumncnatSessionDirection | read-only | current | The direction of this session with respect to the local network. 'inbound' indicates that this session was initiated from the public network into the private n… |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.4 | ColumncnatSessionUpTime | read-only | current | The up time of this session in one-hundredths of a second. |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.5 | ColumncnatSessionProtocolType | read-only | current | The protocol type of this session. TCP and UDP sessions are uniquely identified by the tuple of (source IP address, source UDP/TCP port, destination IP address… |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.6 | ColumncnatSessionOrigPrivateAddr | read-only | current | The original IP address of the session endpoint that lies in the private network. |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.7 | ColumncnatSessionTransPrivateAddr | read-only | current | The translated IP address of the session endpoint that lies in the private network. The value of this object is equal to that of the original public IP Address… |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.8 | ColumncnatSessionOrigPrivatePort | read-only | current | The original transport port of the session endpoint that belongs to the private network. If this is an ICMP session then the value is the ICMP request ID. |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.9 | ColumncnatSessionTransPrivatePort | read-only | current | The translated transport port of the session that lies in the private network. The value of this object is equal to that of the original transport port (cnatSe… |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.10 | ColumncnatSessionOrigPublicAddr | read-only | current | The original IP address of the session endpoint that lies in the public network. |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.11 | ColumncnatSessionTransPublicAddr | read-only | current | The translated IP address of the session endpoint that belongs to the public network. The value of this object is equal to that of the original public IP Addre… |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.12 | ColumncnatSessionOrigPublicPort | read-only | current | The original transport port of the session endpoint that belongs to the public network. If this is an ICMP session then the value contains the ICMP request ID. |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.13 | ColumncnatSessionTransPublicPort | read-only | current | The translated transport port of the session endpoint that belongs to the public network. The value of this object is equal to that of the original transport p… |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.14 | ColumncnatSessionCurrentIdletime | read-only | current | The time in one-hundredths of a second since a packet belonging to this session was last detected. |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.15 | ColumncnatSessionSecondBindId | read-only | current | The natBindId of the 'other' NAT binding incase of Twice NAT. An instance of this object contains a valid value only if the binding type for this session is Tw… |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.16 | ColumncnatSessionInTranslate | read-only | current | The number of inbound packets that were translated by this session. |
| 1.3.6.1.4.1.9.10.77.1.2.5.1.17 | ColumncnatSessionOutTranslate | read-only | current | The number of outbound packets that were translated by this session. |
| 1.3.6.1.4.1.9.10.77.1.3 | NodecnatStatistics | |||
| 1.3.6.1.4.1.9.10.77.1.3.1 | TablecnatProtocolStatsTable | not-accessible | current | The (conceptual) table containing per protocol NAT statistics. |
| 1.3.6.1.4.1.9.10.77.1.3.1.1 | RowcnatProtocolStatsEntry | not-accessible | current | An entry (conceptual row) containing NAT statistics pertaining to a particular protocol. |
| 1.3.6.1.4.1.9.10.77.1.3.1.1.1 | ColumncnatProtocolStatsName | not-accessible | current | This object represents the protocol pertaining to which statistics are reported. |
| 1.3.6.1.4.1.9.10.77.1.3.1.1.2 | ColumncnatProtocolStatsInTranslate | read-only | current | The number of inbound packets, pertaining to the protocol identified by cnatProtocolStatsName, that underwent NAT. |
| 1.3.6.1.4.1.9.10.77.1.3.1.1.3 | ColumncnatProtocolStatsOutTranslate | read-only | current | The number of outbound packets, pertaining to the protocol identified by cnatProtocolStatsName, that underwent NAT. |
| 1.3.6.1.4.1.9.10.77.1.3.1.1.4 | ColumncnatProtocolStatsRejectCount | read-only | current | The number of packets, pertaining to the protocol identified by cnatProtocolStatsName, that had to be rejected/dropped due to lack of resources. These rejectio… |
| 1.3.6.1.4.1.9.10.77.1.3.2 | TablecnatAddrMapStatsTable | not-accessible | current | The (conceptual) table containing per address map NAT statistics. |
| 1.3.6.1.4.1.9.10.77.1.3.2.1 | RowcnatAddrMapStatsEntry | not-accessible | current | An entry (conceptual row) containing NAT statistics per address map. |
| 1.3.6.1.4.1.9.10.77.1.3.2.1.1 | ColumncnatAddrMapStatsConfName | not-accessible | current | The name of the configuration (from the cnatConfTable), regarding which statistics are being reported. The configuration name along with Map name uniquely iden… |
| 1.3.6.1.4.1.9.10.77.1.3.2.1.2 | ColumncnatAddrMapStatsMapName | not-accessible | current | The name of the Address Map (from the cnatConfStaticAddrMapTable/cnatConfDynAddrMapTable), regarding which statistics are being reported. The configuration nam… |
| 1.3.6.1.4.1.9.10.77.1.3.2.1.3 | ColumncnatAddrMapStatsInTranslate | read-only | current | The number of inbound packets, pertaining to this address map entry, that were translated. |
| 1.3.6.1.4.1.9.10.77.1.3.2.1.4 | ColumncnatAddrMapStatsOutTranslate | read-only | current | The number of outbound packets, pertaining to this address map entry, that were translated. |
| 1.3.6.1.4.1.9.10.77.1.3.2.1.5 | ColumncnatAddrMapStatsNoResource | read-only | current | The number of packets, pertaining to this address map entry, that were dropped due to lack of addresses in the address pool identified by this address map. The… |
| 1.3.6.1.4.1.9.10.77.1.3.2.1.6 | ColumncnatAddrMapStatsAddrUsed | read-only | current | The number of addresses, pertaining to this address map, that are currently being used from the nat pool. The value of this object is irrelevant if the address… |
| 1.3.6.1.4.1.9.10.77.1.3.3 | TablecnatInterfaceStatsTable | not-accessible | current | This table augments the cnatInterfaceTable and provides statistics information pertaining to the specified interface. |
| 1.3.6.1.4.1.9.10.77.1.3.3.1 | RowcnatInterfaceStatsEntry | not-accessible | current | Each entry of the cnatInterfaceStatsTable represents stats pertaining to one interface, which is identified by its ifIndex. |
| 1.3.6.1.4.1.9.10.77.1.3.3.1.1 | ColumncnatInterfacePktsIn | read-only | current | Number of packets received on this interface that were translated. |
| 1.3.6.1.4.1.9.10.77.1.3.3.1.2 | ColumncnatInterfacePktsOut | read-only | current | Number of translated packets that were sent out this interface. |
| 1.3.6.1.4.1.9.10.77.2 | NodeciscoNatMIBNotificationPrefix | |||
| 1.3.6.1.4.1.9.10.77.2.0 | NodeciscoNatMIBNotifications | |||
| 1.3.6.1.4.1.9.10.77.3 | NodeciscoNatMIBConformance | |||
| 1.3.6.1.4.1.9.10.77.3.1 | NodeciscoNatMIBCompliances | |||
| 1.3.6.1.4.1.9.10.77.3.1.1 | ComplianceciscoNatMIBCompliance | current | The compliance statement for devices running NAT. | |
| 1.3.6.1.4.1.9.10.77.3.2 | NodeciscoNatMIBGroups | |||
| 1.3.6.1.4.1.9.10.77.3.2.1 | GroupcnatConfigGroup | current | A collection of configuration-related information required to support management of devices supporting NAT. | |
| 1.3.6.1.4.1.9.10.77.3.2.2 | GroupcnatBindGroup | current | A collection of BIND-related objects required to support management of devices supporting NAT. | |
| 1.3.6.1.4.1.9.10.77.3.2.3 | GroupcnatStatsGroup | current | A collection of NAT statistics related objects required to support troubleshooting/monitoring NAT operation. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| NATProtocolType | INTEGER { other (1), icmp (2), udp (3), tcp (4) } | current | A list of protocols that are affected by NAT. Inclusion of values is not intended to imply that those protocols need be supported. |