MIB Viewer

CISCO-IETF-PIM-MIB

71 objects
Address family independent MIB module for management of PIM routers. This MIB module is based on RFC 2934 with additional MIB objects added to make it address family independent MIB. This Cisco MIB was created due to non availability of RFC or an Internet Draft, which can provide address family independent MIB for management of PIM routers. This MIB may later be deprecated with a stable RFC or an Internet Draft.
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.10.119IdentityciscoIetfPimMIBAddress family independent MIB module for management of PIM routers. This MIB module is based on RFC 2934 with additional MIB objects added to make it address …
1.3.6.1.4.1.9.10.119.0NodecPimNotifs
1.3.6.1.4.1.9.10.119.0.2NotificationcPimNbrLosscurrentA cPimNbrLoss trap signifies the loss of an adjacency with a neighbor. This trap should be generated when the neighbor timer expires, and the router has no oth…
1.3.6.1.4.1.9.10.119.1NodecPimMIBObjects
1.3.6.1.4.1.9.10.119.1.1NodecPim
1.3.6.1.4.1.9.10.119.1.1.1ScalarcPimJoinPruneIntervalread-writecurrentThe default interval at which periodic PIM-SM Join/Prune messages are to be sent.
1.3.6.1.4.1.9.10.119.1.1.2TablecPimIfTablenot-accessiblecurrentThe (conceptual) table listing the router's PIM interfaces. Along with PIM IGMP or MLD is enabled on all interfaces listed in this table.
1.3.6.1.4.1.9.10.119.1.1.2.1RowcPimIfEntrynot-accessiblecurrentAn entry (conceptual row) in the pimIfTable.
1.3.6.1.4.1.9.10.119.1.1.2.1.1ColumncPimIfIndexnot-accessiblecurrentThe ifIndex value of this PIM interface.
1.3.6.1.4.1.9.10.119.1.1.2.1.2ColumncPimIfInetVersionnot-accessiblecurrentThe Inet version of this row.
1.3.6.1.4.1.9.10.119.1.1.2.1.3ColumncPimIfAddressTyperead-createcurrentThis objects identifies type of InetAddress presented in cPimIfAddress and cPimIfDR
1.3.6.1.4.1.9.10.119.1.1.2.1.4ColumncPimIfAddressread-createcurrentThe Inet address of the PIM interface.
1.3.6.1.4.1.9.10.119.1.1.2.1.5ColumncPimIfNetMaskread-onlycurrentThe network mask for the IP address of the PIM interface.
1.3.6.1.4.1.9.10.119.1.1.2.1.6ColumncPimIfModeread-createcurrentThe configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1. dense (1): indicates interface is running PIM dense mode sparse (2):…
1.3.6.1.4.1.9.10.119.1.1.2.1.7ColumncPimIfDRread-onlycurrentThe Designated Router on this PIM interface. For point-to- point interfaces, this object has the value 0.0.0.0 or 0::0
1.3.6.1.4.1.9.10.119.1.1.2.1.8ColumncPimIfHelloIntervalread-createcurrentThe frequency at which PIM Hello messages are transmitted on this interface.
1.3.6.1.4.1.9.10.119.1.1.2.1.9ColumncPimIfJoinPruneIntervalread-createcurrentThe frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pimJoinPruneInterval.
1.3.6.1.4.1.9.10.119.1.1.2.1.10ColumncPimIfCBSRPreferenceread-createcurrentThe preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate B…
1.3.6.1.4.1.9.10.119.1.1.2.1.11ColumncPimIfStatusread-createcurrentThe status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface.
1.3.6.1.4.1.9.10.119.1.1.3TablecPimNbrTablenot-accessiblecurrentThe (conceptual) table listing the router's PIM neighbors.
1.3.6.1.4.1.9.10.119.1.1.3.1RowcPimNbrEntrynot-accessiblecurrentAn entry (conceptual row) in the pimNbrTable.
1.3.6.1.4.1.9.10.119.1.1.3.1.1ColumncPimNbrIfIndexnot-accessiblecurrentThe value of ifIndex for the interface used to reach this PIM neighbor.
1.3.6.1.4.1.9.10.119.1.1.3.1.2ColumncPimNbrAddressTypenot-accessiblecurrentThis objects identifies type of InetAddress presented in cPimNbrAddress.
1.3.6.1.4.1.9.10.119.1.1.3.1.3ColumncPimNbrAddressnot-accessiblecurrentThe IP address of the PIM neighbor for which this entry contains information.
1.3.6.1.4.1.9.10.119.1.1.3.1.4ColumncPimNbrUpTimeread-onlycurrentThe time since this PIM neighbor (last) became a neighbor of the local router.
1.3.6.1.4.1.9.10.119.1.1.3.1.5ColumncPimNbrExpiryTimeread-onlycurrentThe minimum time remaining before this PIM neighbor will be aged out.
1.3.6.1.4.1.9.10.119.1.1.4TablecPimInetMRouteTablenot-accessiblecurrentThe (conceptual) table listing PIM-specific information on a subset of the rows of the cIpMRouteTable defined in the IP Multicast MIB.
1.3.6.1.4.1.9.10.119.1.1.4.1RowcPimInetMRouteEntrynot-accessiblecurrentAn entry (conceptual row) in the cPimInetMRouteTable. There is one entry per entry in the cIpMRouteTable whose incoming interface is running PIM.
1.3.6.1.4.1.9.10.119.1.1.4.1.1ColumncPimInetMRouteUpstreamAssertTimeread-onlycurrentThe time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense …
1.3.6.1.4.1.9.10.119.1.1.4.1.2ColumncPimInetMRouteAssertMetricread-onlycurrentThe metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received.
1.3.6.1.4.1.9.10.119.1.1.4.1.3ColumncPimInetMRouteAssertMetricPrefread-onlycurrentThe preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect.
1.3.6.1.4.1.9.10.119.1.1.4.1.4ColumncPimInetMRouteAssertRPTBitread-onlycurrentThe value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect.
1.3.6.1.4.1.9.10.119.1.1.4.1.5ColumncPimInetMRouteFlagsread-onlycurrentThis object describes PIM-specific flags related to a multicast state entry. rpt (0): indicates the route is a shared-tree or RP-tree route. spt (1): indicates…
1.3.6.1.4.1.9.10.119.1.1.5TablecPimInetMRouteNextHopTablenot-accessiblecurrentThe (conceptual) table listing PIM-specific information on a subset of the rows of the cIpMRouteNextHopTable defined in the IP Multicast MIB.
1.3.6.1.4.1.9.10.119.1.1.5.1RowcPimInetMRouteNextHopEntrynot-accessiblecurrentAn entry (conceptual row) in the cPimInetMRouteNextHopTable. There is one entry per entry in the cIpMRouteNextHopTable whose interface is running PIM and whose…
1.3.6.1.4.1.9.10.119.1.1.5.1.2ColumncPimInetMRouteNextHopPruneReasonread-onlycurrentThis object indicates the reason why downstream interface was pruned, prune (1): indicates downstream interface was pruned in response to a PIM prune message. …
1.3.6.1.4.1.9.10.119.1.1.6TablecPimRPMapTablenot-accessiblecurrentThe (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IP multicast groups. When the local router is the BSR, this informatio…
1.3.6.1.4.1.9.10.119.1.1.6.1RowcPimRPMapEntrynot-accessiblecurrentAn entry (conceptual row) in the pimRPsTable.
1.3.6.1.4.1.9.10.119.1.1.6.1.1ColumncPimRPMapComponentnot-accessiblecurrentA number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.
1.3.6.1.4.1.9.10.119.1.1.6.1.2ColumncPimRPMapAddrTypenot-accessiblecurrentType of Inet address presented in this row. This includes cPimRPMapGroupAddress and cPimRPMapAddress
1.3.6.1.4.1.9.10.119.1.1.6.1.3ColumncPimRPMapGroupAddressnot-accessiblecurrentThe IP multicast group address which, when combined with pimRPsGroupMask, gives the group prefix for which this entry contains information about the Candidate-…
1.3.6.1.4.1.9.10.119.1.1.6.1.4ColumncPimRPMapGroupMasknot-accessiblecurrentThe multicast group address mask which, when combined with pimRPsGroupAddress, gives the group prefix for which this entry contains information about the Candi…
1.3.6.1.4.1.9.10.119.1.1.6.1.5ColumncPimRPMapAddressnot-accessiblecurrentThe IP address of the Candidate-RP.
1.3.6.1.4.1.9.10.119.1.1.6.1.6ColumncPimRPMapHoldTimeread-onlycurrentThe holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0.
1.3.6.1.4.1.9.10.119.1.1.6.1.7ColumncPimRPMapExpiryTimeread-onlycurrentThe minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0.
1.3.6.1.4.1.9.10.119.1.1.7TablecPimCRPTablenot-accessiblecurrentThe (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of cPimComponentCRPHo…
1.3.6.1.4.1.9.10.119.1.1.7.1RowcPimCRPEntrynot-accessiblecurrentAn entry (conceptual row) in the cPimCRPTable.
1.3.6.1.4.1.9.10.119.1.1.7.1.1ColumncPimCRPAddrTypenot-accessiblecurrentType of Inet address presented in this row. This includes cPimCRPGroupAddress and cPimCRPAddress
1.3.6.1.4.1.9.10.119.1.1.7.1.2ColumncPimCRPGroupAddressnot-accessiblecurrentThe IP multicast group address which, when combined with cPimCRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Cand…
1.3.6.1.4.1.9.10.119.1.1.7.1.3ColumncPimCRPGroupMasknot-accessiblecurrentThe multicast group address mask which, when combined with cPimCRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Ca…
1.3.6.1.4.1.9.10.119.1.1.7.1.4ColumncPimCRPAddressread-createcurrentThe (unicast) address of the interface which will be advertised as a Candidate-RP.
1.3.6.1.4.1.9.10.119.1.1.7.1.5ColumncPimCRPRowStatusread-createcurrentThe status of this row, by which new entries may be created, or old entries deleted from this table.
1.3.6.1.4.1.9.10.119.1.1.8TablecPimComponentTablenot-accessiblecurrentThe (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected. A PIM-SM domain is defined…
1.3.6.1.4.1.9.10.119.1.1.8.1RowcPimComponentEntrynot-accessiblecurrentAn entry (conceptual row) in the cPimComponentTable.
1.3.6.1.4.1.9.10.119.1.1.8.1.1ColumncPimComponentIndexnot-accessiblecurrentA number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Routers that only suppo…
1.3.6.1.4.1.9.10.119.1.1.8.1.2ColumncPimComponentBSRAddrTyperead-createcurrentType of Inet address presented in cPimComponentBSRAddress.
1.3.6.1.4.1.9.10.119.1.1.8.1.3ColumncPimComponentBSRAddressread-createcurrentThe IP address of the bootstrap router (BSR) for the local PIM region.
1.3.6.1.4.1.9.10.119.1.1.8.1.4ColumncPimComponentBSRExpiryTimeread-createcurrentThe minimum time remaining before the bootstrap router in the local domain will be declared down. For candidate BSRs, this is the time until the component send…
1.3.6.1.4.1.9.10.119.1.1.8.1.5ColumncPimComponentCRPHoldTimeread-createcurrentThe holdtime of the component when it is a candidate RP in the local domain. The value of 0 is used to indicate that the local system is not a Candidate-RP.
1.3.6.1.4.1.9.10.119.1.1.8.1.6ColumncPimComponentStatusread-createcurrentThe status of this entry. Creating the entry creates another protocol instance; destroying the entry disables a protocol instance.
1.3.6.1.4.1.9.10.119.2NodecPimMIBConformance
1.3.6.1.4.1.9.10.119.2.1NodecPimMIBCompliances
1.3.6.1.4.1.9.10.119.2.1.1CompliancecPimSparseV2MIBComplianceread-onlycurrentThe compliance statement for routers running PIM Sparse Mode and implementing the PIM MIB.
1.3.6.1.4.1.9.10.119.2.1.2CompliancecPimDenseV2MIBComplianceread-onlycurrentThe compliance statement for routers running PIM Dense Mode and implementing the PIM MIB.
1.3.6.1.4.1.9.10.119.2.2NodecPimMIBGroups
1.3.6.1.4.1.9.10.119.2.2.1GroupcPimNotificationGroupcurrentA collection of notifications for signaling important PIM events.
1.3.6.1.4.1.9.10.119.2.2.2GroupcPimV2MIBGroupcurrentA collection of objects to support management of PIM Sparse Mode (version 2) routers.
1.3.6.1.4.1.9.10.119.2.2.3GroupcPimDenseV2MIBGroupcurrentA collection of objects to support management of PIM Dense Mode (version 2) routers.
1.3.6.1.4.1.9.10.119.2.2.4GroupcPimV2CRPMIBGroupcurrentA collection of objects to support configuration of which groups a router is to advertise itself as a Candidate-RP.
1.3.6.1.4.1.9.10.119.2.2.5GroupcPimNextHopGroupcurrentA collection of optional objects to provide per-next hop information for diagnostic purposes. Supporting this group may add a large number of instances to a tr…
1.3.6.1.4.1.9.10.119.2.2.6GroupcPimAssertGroupcurrentA collection of optional objects to provide extra information about the assert election process. There is no protocol reason to keep such information, but some…