MIB Viewer

CISCO-IETF-PW-MPLS-MIB

60 objects
This MIB complements the CISCO-IETF-PW-MIB for PW operation over MPLS.
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.10.107IdentitycpwVcMplsMIBThis MIB complements the CISCO-IETF-PW-MIB for PW operation over MPLS.
1.3.6.1.4.1.9.10.107.0NodecpwVcMplsNotifications
1.3.6.1.4.1.9.10.107.0.0NodecpwVcMplsNotifyPrefix
1.3.6.1.4.1.9.10.107.1NodecpwVcMplsObjects
1.3.6.1.4.1.9.10.107.1.1TablecpwVcMplsTablenot-accessiblecurrentThis table specifies information for VC to be carried over MPLS PSN.
1.3.6.1.4.1.9.10.107.1.1.1RowcpwVcMplsEntrynot-accessiblecurrentA row in this table represents parameters specific to MPLS PSN for a pseudo wire connection (VC). The row is created automatically by the local agent if the cp…
1.3.6.1.4.1.9.10.107.1.1.1.1ColumncpwVcMplsMplsTyperead-writecurrentSet by the operator to indicate the outer tunnel types, if exists. mplsTe is used if the outer tunnel was set-up by MPLS-TE, and mplsNonTe is used the outer tu…
1.3.6.1.4.1.9.10.107.1.1.1.2ColumncpwVcMplsExpBitsModeread-writecurrentSet by the operator to indicate the way the VC shim label EXP bits are to be determined. The value of outerTunnel(1) is used where there is an outer tunnel - c…
1.3.6.1.4.1.9.10.107.1.1.1.3ColumncpwVcMplsExpBitsread-writecurrentSet by the operator to indicate the MPLS EXP bits to be used on the VC shim label if cpwVcMplsExpBitsMode is specifiedValue(2), zero otherwise.
1.3.6.1.4.1.9.10.107.1.1.1.4ColumncpwVcMplsTtlread-writecurrentSet by the operator to indicate the VC TTL bits to be used on the VC shim label.
1.3.6.1.4.1.9.10.107.1.1.1.5ColumncpwVcMplsLocalLdpIDread-writecurrentThe local LDP identifier of the LDP entity creating this VC in the local node. As the VC labels are always set from the per platform label space, the last two …
1.3.6.1.4.1.9.10.107.1.1.1.6ColumncpwVcMplsLocalLdpEntityIDread-writecurrentThe local LDP Entity index of the LDP entity to be used for this VC on the local node. Should be set to all zeros if not used.
1.3.6.1.4.1.9.10.107.1.1.1.7ColumncpwVcMplsPeerLdpIDread-onlycurrentThe peer LDP identifier as identified from the LDP session. Should be zero if not relevant or not known yet.
1.3.6.1.4.1.9.10.107.1.1.1.8ColumncpwVcMplsStorageTyperead-writecurrentThis variable indicates the storage type for this row.
1.3.6.1.4.1.9.10.107.1.2ScalarcpwVcMplsOutboundIndexNextread-onlycurrentThis object contains an appropriate value to be used for cpwVcMplsOutboundIndex when creating entries in the cpwVcMplsOutboundTable. The value 0 indicates that…
1.3.6.1.4.1.9.10.107.1.3TablecpwVcMplsOutboundTablenot-accessiblecurrentThis table associates VCs using MPLS PSN with the outbound MPLS tunnels (i.e. toward the PSN) or the physical interface in case of VC only.
1.3.6.1.4.1.9.10.107.1.3.1RowcpwVcMplsOutboundEntrynot-accessiblecurrentA row in this table represents a link between PW VC (that require MPLS tunnels) and MPLS tunnel toward the PSN. In the case of VC only, it associate the VC wit…
1.3.6.1.4.1.9.10.107.1.3.1.1ColumncpwVcMplsOutboundIndexnot-accessiblecurrentArbitrary index for enabling multiple rows per VC in this table. Next available free index can be retrieved using cpwVcMplsOutboundIndexNext.
1.3.6.1.4.1.9.10.107.1.3.1.2ColumncpwVcMplsOutboundLsrXcIndexread-createcurrentThis object will be set by the operator. If the outer label is defined in the MPL-LSR-MIB, i.e. set by LDP or manually, this object points to the XC index of t…
1.3.6.1.4.1.9.10.107.1.3.1.3ColumncpwVcMplsOutboundTunnelIndexread-createcurrentPart of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.
1.3.6.1.4.1.9.10.107.1.3.1.4ColumncpwVcMplsOutboundTunnelInstanceread-createcurrentPart of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.
1.3.6.1.4.1.9.10.107.1.3.1.5ColumncpwVcMplsOutboundTunnelLclLSRread-createcurrentPart of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.
1.3.6.1.4.1.9.10.107.1.3.1.6ColumncpwVcMplsOutboundTunnelPeerLSRread-createcurrentPart of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.
1.3.6.1.4.1.9.10.107.1.3.1.7ColumncpwVcMplsOutboundIfIndexread-createcurrentIn case of VC only (no outer tunnel), this object holds the ifIndex of the outbound port, otherwise set to zero.
1.3.6.1.4.1.9.10.107.1.3.1.8ColumncpwVcMplsOutboundRowStatusread-createcurrentFor creating, modifying, and deleting this row.
1.3.6.1.4.1.9.10.107.1.3.1.9ColumncpwVcMplsOutboundStorageTyperead-createcurrentThis variable indicates the storage type for this object.
1.3.6.1.4.1.9.10.107.1.4ScalarcpwVcMplsInboundIndexNextread-onlycurrentThis object contains an appropriate value to be used for cpwVcMplsInboundIndex when creating entries in the cpwVcMplsInboundTable. The value 0 indicates that n…
1.3.6.1.4.1.9.10.107.1.5TablecpwVcMplsInboundTablenot-accessiblecurrentThis table associates VCs using MPLS PSN with the inbound MPLS tunnels (i.e. for packets coming from the PSN), if such association is desired (mainly for secur…
1.3.6.1.4.1.9.10.107.1.5.1RowcpwVcMplsInboundEntrynot-accessiblecurrentA row in this table represents a link between PW VCs (that require MPLS tunnels) and MPLS tunnel for packets arriving from the PSN. This table is indexed by th…
1.3.6.1.4.1.9.10.107.1.5.1.1ColumncpwVcMplsInboundIndexnot-accessiblecurrentArbitrary index for enabling multiple rows per VC in this table. Next available free index can be retrieved using cpwVcMplsInboundIndexNext.
1.3.6.1.4.1.9.10.107.1.5.1.2ColumncpwVcMplsInboundLsrXcIndexread-createcurrentIf the outer label is defined in the MPL-LSR-MIB, i.e. set by LDP or manually, this object points to the XC index of the outer tunnel. Otherwise, it is set to …
1.3.6.1.4.1.9.10.107.1.5.1.3ColumncpwVcMplsInboundTunnelIndexread-createcurrentPart of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.
1.3.6.1.4.1.9.10.107.1.5.1.4ColumncpwVcMplsInboundTunnelInstanceread-createcurrentPart of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.
1.3.6.1.4.1.9.10.107.1.5.1.5ColumncpwVcMplsInboundTunnelLclLSRread-createcurrentPart of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.
1.3.6.1.4.1.9.10.107.1.5.1.6ColumncpwVcMplsInboundTunnelPeerLSRread-createcurrentPart of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.
1.3.6.1.4.1.9.10.107.1.5.1.7ColumncpwVcMplsInboundIfIndexread-createcurrentIn case of VC only (no outer tunnel), this object holds the ifIndex of the inbound port, otherwise set to zero.
1.3.6.1.4.1.9.10.107.1.5.1.8ColumncpwVcMplsInboundRowStatusread-createcurrentFor creating, modifying, and deleting this row.
1.3.6.1.4.1.9.10.107.1.5.1.9ColumncpwVcMplsInboundStorageTyperead-createcurrentThis variable indicates the storage type for this row.
1.3.6.1.4.1.9.10.107.1.6TablecpwVcMplsNonTeMappingTablenot-accessiblecurrentThis table maps an inbound/outbound Tunnel to a VC in non- TE applications.
1.3.6.1.4.1.9.10.107.1.6.1RowcpwVcMplsNonTeMappingEntrynot-accessiblecurrentA row in this table represents the association between the PW VC and it's non TE MPLS outer Tunnel it's physical interface if there is no outer tunnel (VC only…
1.3.6.1.4.1.9.10.107.1.6.1.1ColumncpwVcMplsNonTeMappingTunnelDirectionnot-accessiblecurrentIdentifies if the row represent an outbound or inbound mapping.
1.3.6.1.4.1.9.10.107.1.6.1.2ColumncpwVcMplsNonTeMappingXcTunnelIndexnot-accessiblecurrentIndex for the conceptual XC row identifying Tunnel to VC mappings when the outer tunnel is created by the MPLS-LSR- MIB, Zero otherwise.
1.3.6.1.4.1.9.10.107.1.6.1.3ColumncpwVcMplsNonTeMappingIfIndexnot-accessiblecurrentIdentify the port on which the VC is carried for VC only case.
1.3.6.1.4.1.9.10.107.1.6.1.4ColumncpwVcMplsNonTeMappingVcIndexread-onlycurrentThe value that represent the VC in the cpwVcTable.
1.3.6.1.4.1.9.10.107.1.7TablecpwVcMplsTeMappingTablenot-accessiblecurrentThis table maps an inbound/outbound Tunnel to a VC in MPLS-TE applications.
1.3.6.1.4.1.9.10.107.1.7.1RowcpwVcMplsTeMappingEntrynot-accessiblecurrentA row in this table represents the association between a PW VC and it's MPLS-TE outer Tunnel. An application can use this table to quickly retrieve the PW carr…
1.3.6.1.4.1.9.10.107.1.7.1.1ColumncpwVcMplsTeMappingTunnelDirectionnot-accessiblecurrentIdentifies if the row represent an outbound or inbound mapping.
1.3.6.1.4.1.9.10.107.1.7.1.2ColumncpwVcMplsTeMappingTunnelIndexnot-accessiblecurrentPrimary index for the conceptual row identifying the MPLS-TE tunnel.
1.3.6.1.4.1.9.10.107.1.7.1.3ColumncpwVcMplsTeMappingTunnelInstancenot-accessiblecurrentIdentifies an instance of the MPLS-TE tunnel.
1.3.6.1.4.1.9.10.107.1.7.1.4ColumncpwVcMplsTeMappingTunnelPeerLsrIDnot-accessiblecurrentIdentifies an Peer LSR when the outer tunnel is MPLS-TE based.
1.3.6.1.4.1.9.10.107.1.7.1.5ColumncpwVcMplsTeMappingTunnelLocalLsrIDnot-accessiblecurrentIdentifies the local LSR.
1.3.6.1.4.1.9.10.107.1.7.1.6ColumncpwVcMplsTeMappingVcIndexread-onlycurrentThe value that represent the VC in the cpwVcTable.
1.3.6.1.4.1.9.10.107.2NodecpwVcMplsConformance
1.3.6.1.4.1.9.10.107.2.1NodecpwVcMplsGroups
1.3.6.1.4.1.9.10.107.2.1.1GroupcpwVcMplsGroupcurrentCollection of objects needed for PW VC over MPLS PSN configuration.
1.3.6.1.4.1.9.10.107.2.1.2GroupcpwVcMplsOutboundGroupcurrentCollection of objects needed for outbound association of VC and MPLS tunnel.
1.3.6.1.4.1.9.10.107.2.1.3GroupcpwVcMplsInboundGroupcurrentCollection of objects needed for inbound association of VC and MPLS tunnel. This group is mandatory if strict mode is implemented.
1.3.6.1.4.1.9.10.107.2.1.4GroupcpwVcMplsMappingGroupcurrentCollection of objects used for mapping of tunnels and VC labels to VC index.
1.3.6.1.4.1.9.10.107.2.2NodecpwVcMplsCompliances
1.3.6.1.4.1.9.10.107.2.2.1CompliancecpwMplsModuleCompliancecurrentThe compliance statement for agent that support PW over MPLS PSN operation.