CISCO-IETF-PW-TDM-MIB
86 objects
This MIB contains managed object definitions for encapsulating TDM (T1,E1, T3, E3, NxDS0) as pseudo-wires over packet-switching networks (PSN). This MIB supplements the CISCO-IETF-PW-MIB. The CISCO-IETF-PW-MIB contains structures and MIB associations generic to Pseudo-Wire (PW) emulation. PW-specific MIBs (such as this) contain config and stats for specific PW types.
Imported Objects
| CISCO-IETF-PW-MIB | cpwVcIndex |
| CISCO-SMI | ciscoExperiment |
| IF-MIB | InterfaceIndexOrZero |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.131 | IdentitycpwCTDMMIB | This MIB contains managed object definitions for encapsulating TDM (T1,E1, T3, E3, NxDS0) as pseudo-wires over packet-switching networks (PSN). This MIB supple… | ||
| 1.3.6.1.4.1.9.10.131.0 | NodecpwCTDMNotifications | |||
| 1.3.6.1.4.1.9.10.131.1 | NodecpwCTDMObjects | |||
| 1.3.6.1.4.1.9.10.131.1.1 | TablecpwCTDMTable | not-accessible | current | This table contains basic information including ifIndex, and pointers to entries in the relevant TDM config tables for this TDM PW. |
| 1.3.6.1.4.1.9.10.131.1.1.1 | RowcpwCTDMEntry | not-accessible | current | This table is indexed by the same index that was created for the associated entry in the VC Table (in the CISCO-IETF-PW-MIB). - The CpwVcIndex. An entry is cre… |
| 1.3.6.1.4.1.9.10.131.1.1.1.1 | ColumncpwCTDMRate | read-write | current | The parameter represents the bit-rate of the TDM service in multiples of the 'basic' 64 Kbit/s rate. It complements the definition of cpwVcType used in CISCO-I… |
| 1.3.6.1.4.1.9.10.131.1.1.1.2 | ColumncpwCTDMIfIndex | read-write | current | This is a unique index within the ifTable. It represents the interface index of the full link or the interface index for the bundle holding the group of time s… |
| 1.3.6.1.4.1.9.10.131.1.1.1.3 | ColumncpwCGenTDMCfgIndex | read-write | current | Index to the generic parameters in the TDM configuration table that appears in this MIB module. It is likely that multiple TDM PWs of the same characteristic w… |
| 1.3.6.1.4.1.9.10.131.1.1.1.4 | ColumncpwCRelTDMCfgIndex | read-write | current | Index to the relevant TDM configuration table entry that appears in one of the related MIB modules such as TDMoIP or CESoPSN. It is likely that multiple TDM PW… |
| 1.3.6.1.4.1.9.10.131.1.1.1.5 | ColumncpwCTDMConfigError | read-only | current | Any of the bits are set if the local configuration is not compatible with the peer configuration as available from the various parameters options. -tdmTypeInco… |
| 1.3.6.1.4.1.9.10.131.1.1.1.6 | ColumncpwCTDMTimeElapsed | read-only | current | The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adju… |
| 1.3.6.1.4.1.9.10.131.1.1.1.7 | ColumncpwCTDMValidIntervals | read-only | current | The number of previous 15-minute intervals for which data was collected. An agent with TDM capability must be capable of supporting at least n intervals. The m… |
| 1.3.6.1.4.1.9.10.131.1.1.1.8 | ColumncpwCTDMValidDayIntervals | read-only | current | The number of previous days for which data was collected. An agent with TDM capability must be capable of supporting at least n intervals. The minimum value of… |
| 1.3.6.1.4.1.9.10.131.1.1.1.9 | ColumncpwCTDMCurrentIndications | read-only | current | The following defects should be detected and reported upon request: -Stray packets MAY be detected by the PSN and multiplexing layers. Stray packets MUST be di… |
| 1.3.6.1.4.1.9.10.131.1.1.1.10 | ColumncpwCTDMLatchedIndications | read-only | current | The state of TDM indicators when the TDM PW last declared an error second (either as ES, SES or a second with errors inside a UAS) condition. At this time, onl… |
| 1.3.6.1.4.1.9.10.131.1.1.1.11 | ColumncpwCTDMLastEsTimeStamp | read-only | current | The value of sysUpTime at the most recent occasion at which the TDM PW entered the ES or SES state. |
| 1.3.6.1.4.1.9.10.131.1.2 | ScalarcpwCTDMCfgIndexNext | read-only | current | This object contains the value to be used for cpwCTDMCfgIndex when creating entries in the cpwCTDMCfgTable. The value 0 indicates that no unassigned entries ar… |
| 1.3.6.1.4.1.9.10.131.1.3 | TablecpwCTDMCfgTable | not-accessible | current | This table contains a set of parameters that may be referenced by one or more TDM PWs in cpwCTDMTable. |
| 1.3.6.1.4.1.9.10.131.1.3.1 | RowcpwCTDMCfgEntry | not-accessible | current | These parameters define the characteristics of a TDM PW. They are grouped here to ease NMS burden. Once an entry is created here it may be re-used by many PWs. |
| 1.3.6.1.4.1.9.10.131.1.3.1.1 | ColumncpwCTDMCfgIndex | not-accessible | current | Index to an entry in this table. The value is a copy of the assigned cpwCTDMCfgIndexNext. |
| 1.3.6.1.4.1.9.10.131.1.3.1.2 | ColumncpwCTDMCfgConfErr | read-only | current | This object indicates the various configuration errors, illegal settings within the cpwCTDMCfg table. The errors can be due to several reasons, like Payload si… |
| 1.3.6.1.4.1.9.10.131.1.3.1.3 | ColumncpwCTDMCfgPayloadSize | read-create | current | The value of this object indicates the PayLoad Size (in bytes) to be defined during the PW setUp. Upon TX, implementation must be capable of carrying that amou… |
| 1.3.6.1.4.1.9.10.131.1.3.1.4 | ColumncpwCTDMCfgPktReorder | read-create | current | If set to true, CE bound packets are queued in the jitter buffer, out of order packets are re-ordered. The maximum sequence number differential (i.e., the rang… |
| 1.3.6.1.4.1.9.10.131.1.3.1.5 | ColumncpwCTDMCfgRtpHdrUsed | read-create | current | If the value of this object is set to false, then a RTP header is not pre-pended to the TDM packet. |
| 1.3.6.1.4.1.9.10.131.1.3.1.6 | ColumncpwCTDMCfgJtrBfrDepth | read-create | current | The size of this buffer SHOULD be locally configured to allow accommodation to the PSN-specific packet delay variation. If configured to a value not supported … |
| 1.3.6.1.4.1.9.10.131.1.3.1.7 | ColumncpwCTDMCfgPayloadSuppression | read-create | current | This object indicates whether the Payload suppression is eanbled or disabled. Payload MAY be omitted in order to conserve bandwidth. enable - Payload suppressi… |
| 1.3.6.1.4.1.9.10.131.1.3.1.8 | ColumncpwCTDMCfgConsecPktsInSynch | read-create | current | The number of consecutive packets with sequential sequence numbers that are required to exit the Loss of Packets (LOPS) state. |
| 1.3.6.1.4.1.9.10.131.1.3.1.9 | ColumncpwCTDMCfgConsecMissPktsOutSynch | read-create | current | The number of consecutive missing packets that are required to enter the LOPS state. |
| 1.3.6.1.4.1.9.10.131.1.3.1.10 | ColumncpwCTDMCfgSetUp2SynchTimeOut | read-create | current | The amount of time the host should wait before declaring the pseudo wire in down state, if the number of consecutive TDM packets that have been received after … |
| 1.3.6.1.4.1.9.10.131.1.3.1.11 | ColumncpwCTDMCfgPktReplacePolicy | read-create | current | This parameter determines the value to be played when CE bound packets have over/underflow the jitter buffer, or are missing for any reason. This AIS (Alarm In… |
| 1.3.6.1.4.1.9.10.131.1.3.1.12 | ColumncpwCTDMCfgAvePktLossTimeWindow | read-create | current | The length of time over which the average packet loss rate should be computed to detect Excessive packet loss rate |
| 1.3.6.1.4.1.9.10.131.1.3.1.13 | ColumncpwCTDMCfgExcessivePktLossThreshold | read-create | current | Excessive packet loss rate is detected by computing the average packetloss rate over a cpwCTDMCfgAvePktLossTimeWindow amount of time and comparing it with this… |
| 1.3.6.1.4.1.9.10.131.1.3.1.14 | ColumncpwCTDMCfgAlarmThreshold | read-create | current | Alarms are only reported when the defect state persists for the length of time specified by this object. The object's unit is millisec |
| 1.3.6.1.4.1.9.10.131.1.3.1.15 | ColumncpwCTDMCfgClearAlarmThreshold | read-create | current | Alarm MUST be cleared after the corresponding defect is undetected for the amount of time specified by this object. The object's unit is millisec |
| 1.3.6.1.4.1.9.10.131.1.3.1.16 | ColumncpwCTDMCfgMissingPktsToSes | read-create | current | Number of missing packets detected (consecutive or not) within a 1 second window to cause a Severely Error Second (SES) to be counted. |
| 1.3.6.1.4.1.9.10.131.1.3.1.17 | ColumncpwCTDMCfgTimestampMode | read-create | current | Timestamp generation MAY be used in one of the following modes: 1. Absolute mode: the PSN-bound IWF sets timestamps using the clock recovered from the incoming… |
| 1.3.6.1.4.1.9.10.131.1.3.1.18 | ColumncpwCTDMCfgStorageType | read-create | current | This variable indicates the storage type for this row. The following are the read-write objects in permanent(4) rows, that an agent must allow to be writable: … |
| 1.3.6.1.4.1.9.10.131.1.3.1.19 | ColumncpwCTDMCfgRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). All of the colum… |
| 1.3.6.1.4.1.9.10.131.1.5 | TablecpwCTDMPerfCurrentTable | not-accessible | current | This table provides TDM PW performance information. This includes current 15 minute interval counts. The table includes counters that work together to integrat… |
| 1.3.6.1.4.1.9.10.131.1.5.1 | RowcpwCTDMPerfCurrentEntry | not-accessible | current | An entry in this table is created by the agent for every cpwCTDMTable entry. After 15 minutes, the contents of this table entry are copied to a new entry in th… |
| 1.3.6.1.4.1.9.10.131.1.5.1.1 | ColumncpwCTDMPerfCurrentMissingPkts | read-only | current | Number of missing packets (as detected via control word sequence number gaps). |
| 1.3.6.1.4.1.9.10.131.1.5.1.2 | ColumncpwCTDMPerfCurrentPktsReOrder | read-only | current | Number of packets detected out of sequence (via control word sequence number), but successfully re-ordered. |
| 1.3.6.1.4.1.9.10.131.1.5.1.3 | ColumncpwCTDMPerfCurrentJtrBfrUnderruns | read-only | current | Number of times a packet needed to be played out and the jitter buffer was empty. |
| 1.3.6.1.4.1.9.10.131.1.5.1.4 | ColumncpwCTDMPerfCurrentMisOrderDropped | read-only | current | Number of packets detected out of order(via control word sequence numbers), and could not be re-ordered, or could not fit in the jitter buffer. |
| 1.3.6.1.4.1.9.10.131.1.5.1.5 | ColumncpwCTDMPerfCurrentMalformedPkt | read-only | current | Number of packets detected with unexpected size, or bad headers' stack |
| 1.3.6.1.4.1.9.10.131.1.5.1.6 | ColumncpwCTDMPerfCurrentESs | read-only | current | The counter associated with the number of Error Seconds encountered. Any malformed packet, sequence error and similar are considered as error second |
| 1.3.6.1.4.1.9.10.131.1.5.1.7 | ColumncpwCTDMPerfCurrentSESs | read-only | current | The counter associated with the number of Severely Error Seconds encountered. |
| 1.3.6.1.4.1.9.10.131.1.5.1.8 | ColumncpwCTDMPerfCurrentUASs | read-only | current | The counter associated with the number of Unavailable Seconds encountered. Any consequtive five seconds of SES are counted as one UAS |
| 1.3.6.1.4.1.9.10.131.1.5.1.9 | ColumncpwCTDMPerfCurrentFC | read-only | current | This object represents the number of TDM failure events. A failure event begins when the LOPS failure is declared, and ends when the failure is cleared. A fail… |
| 1.3.6.1.4.1.9.10.131.1.6 | TablecpwCTDMPerfIntervalTable | not-accessible | current | This table provides performance information per TDM PW similar to the cpwCTDMPerfCurrentTable above. However, these counts represent historical 15 minute inter… |
| 1.3.6.1.4.1.9.10.131.1.6.1 | RowcpwCTDMPerfIntervalEntry | not-accessible | current | An entry in this table is created by the agent for every cpwCTDMPerfCurrentEntry that is 15 minutes old. The contents of the Current entry are copied to the ne… |
| 1.3.6.1.4.1.9.10.131.1.6.1.1 | ColumncpwCTDMPerfIntervalNumber | not-accessible | current | This object indicates a number (normally between 1 and 96 to cover a 24 hour period) which identifies the interval for which the set of statistics is available… |
| 1.3.6.1.4.1.9.10.131.1.6.1.2 | ColumncpwCTDMPerfIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.9.10.131.1.6.1.3 | ColumncpwCTDMPerfIntervalDuration | read-only | current | The duration of a particular interval in seconds. Adjustments in the system's time-of-day clock, may cause the interval to be greater or less than, the normal … |
| 1.3.6.1.4.1.9.10.131.1.6.1.4 | ColumncpwCTDMPerfIntervalMissingPkts | read-only | current | Number of missing packets (as detected via control word sequence number gaps). |
| 1.3.6.1.4.1.9.10.131.1.6.1.5 | ColumncpwCTDMPerfIntervalPktsReOrder | read-only | current | Number of packets detected out of sequence (via control word sequence number), but successfully re-ordered. |
| 1.3.6.1.4.1.9.10.131.1.6.1.6 | ColumncpwCTDMPerfIntervalJtrBfrUnderruns | read-only | current | Number of times a packet needed to be played out and the jitter buffer was empty. |
| 1.3.6.1.4.1.9.10.131.1.6.1.7 | ColumncpwCTDMPerfIntervalMisOrderDropped | read-only | current | Number of packets detected out of order(via control word sequence numbers), and could not be re-ordered, or could not fit in the jitter buffer. |
| 1.3.6.1.4.1.9.10.131.1.6.1.8 | ColumncpwCTDMPerfIntervalMalformedPkt | read-only | current | Number of packets detected with unexpected size, or bad headers' stack |
| 1.3.6.1.4.1.9.10.131.1.6.1.9 | ColumncpwCTDMPerfIntervalESs | read-only | current | The counter associated with the number of Error Seconds encountered. |
| 1.3.6.1.4.1.9.10.131.1.6.1.10 | ColumncpwCTDMPerfIntervalSESs | read-only | current | The counter associated with the number of Severely Error Seconds encountered. |
| 1.3.6.1.4.1.9.10.131.1.6.1.11 | ColumncpwCTDMPerfIntervalUASs | read-only | current | The counter associated with the number of Unavailable Seconds encountered. |
| 1.3.6.1.4.1.9.10.131.1.6.1.12 | ColumncpwCTDMPerfIntervalFC | read-only | current | This object represents the number of TDM failure events. A failure event begins when the LOPS failure is declared, and ends when the failure is cleared. A fail… |
| 1.3.6.1.4.1.9.10.131.1.7 | TablecpwCTDMPerf1DayIntervalTable | not-accessible | current | This table provides performance information per TDM PW similar to the cpwCTDMPerfIntervalTable above. However, these counters represent historical 1 day interv… |
| 1.3.6.1.4.1.9.10.131.1.7.1 | RowcpwCTDMPerf1DayIntervalEntry | not-accessible | current | An entry is created in this table by the agent for every entry in the cpwCTDMTable table. |
| 1.3.6.1.4.1.9.10.131.1.7.1.1 | ColumncpwCTDMPerf1DayIntervalNumber | not-accessible | current | The number of interval, where 1 indicates current day measured period and 2 and above indicate previous days respectively |
| 1.3.6.1.4.1.9.10.131.1.7.1.2 | ColumncpwCTDMPerf1DayIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.9.10.131.1.7.1.3 | ColumncpwCTDMPerf1DayIntervalDuration | read-only | current | The duration of a particular interval in seconds, Adjustments in the system's time-of-day clock, may cause the interval to be greater or less than, the normal … |
| 1.3.6.1.4.1.9.10.131.1.7.1.4 | ColumncpwCTDMPerf1DayIntervalMissingPkts | read-only | current | Number of missing packets (as detected via control word sequence number gaps). |
| 1.3.6.1.4.1.9.10.131.1.7.1.5 | ColumncpwCTDMPerf1DayIntervalPktsReOrder | read-only | current | Number of packets detected out of sequence (via control word sequence number), but successfully re-ordered. |
| 1.3.6.1.4.1.9.10.131.1.7.1.6 | ColumncpwCTDMPerf1DayIntervalJtrBfrUnderruns | read-only | current | Number of times a packet needed to be played out and the jitter buffer was empty. |
| 1.3.6.1.4.1.9.10.131.1.7.1.7 | ColumncpwCTDMPerf1DayIntervalMisOrderDropped | read-only | current | Number of packets detected out of order(via control word sequence numbers), and could not be re-ordered, or could not fit in the jitter buffer. |
| 1.3.6.1.4.1.9.10.131.1.7.1.8 | ColumncpwCTDMPerf1DayIntervalMalformedPkt | read-only | current | Number of packets detected with unexpected size, or bad headers' stack. |
| 1.3.6.1.4.1.9.10.131.1.7.1.9 | ColumncpwCTDMPerf1DayIntervalESs | read-only | current | The counter associated with the number of Error Seconds encountered. |
| 1.3.6.1.4.1.9.10.131.1.7.1.10 | ColumncpwCTDMPerf1DayIntervalSESs | read-only | current | The counter associated with the number of Severely Error Seconds. |
| 1.3.6.1.4.1.9.10.131.1.7.1.11 | ColumncpwCTDMPerf1DayIntervalUASs | read-only | current | The counter associated with the number of UnAvailable Seconds. When first entering the UAS state, the number of SES To UAS is added to this object, then as eac… |
| 1.3.6.1.4.1.9.10.131.1.7.1.12 | ColumncpwCTDMPerf1DayIntervalFC | read-only | current | This object represents the number of TDM failure events. A failure event begins when the LOPS failure is declared, and ends when the failure is cleared. |
| 1.3.6.1.4.1.9.10.131.2 | NodecpwCTDMConformance | |||
| 1.3.6.1.4.1.9.10.131.2.1 | NodecpwCTDMGroups | |||
| 1.3.6.1.4.1.9.10.131.2.1.1 | GroupcpwCTDMGroup | current | Collection of objects for basic TDM PW config and status. | |
| 1.3.6.1.4.1.9.10.131.2.1.2 | GroupcpwCTDMPerfCurrentGroup | current | Collection of current statistics objects for TDM PWs. | |
| 1.3.6.1.4.1.9.10.131.2.1.3 | GroupcpwCTDMPerfIntervalGroup | current | Collection of Interval statistics objects for TDM PWs. | |
| 1.3.6.1.4.1.9.10.131.2.1.4 | GroupcpwCTDMPerf1DayIntervalGroup | current | Collection of Daily statistics objects for TDM PWs. | |
| 1.3.6.1.4.1.9.10.131.2.2 | NodecpwCTDMCompliances | |||
| 1.3.6.1.4.1.9.10.131.2.2.1 | CompliancecpwTDMModuleCompliance | read-only | current | The compliance statement for agent that support TDM PW over PSN operation. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CpwTDMCfgIndex | Unsigned32 | current | Index into any of the relevant pwCXXXCfgTable. |