CISCO-IETF-VPLS-BGP-EXT-MIB
36 objects
This MIB module enables the use of any underlying Pseudo Wire network. This MIB extends the MIB module published in the RFC 4188 to manage object definitions for BGP signalled VPLS. GLOSSARY PE The term PE refers to Provider-Edge devices. Pseudo Wire An emulation of a native service over a Packet Switched Network. RD (Route Distinguisher) They are used to create VPN-IPv4 addresses, as specified in [RFC4364]. RT (Route Target) A Route Target attribute can be thought of as identifying a set of sites. More description specified in [RFC4364]. u-PE A Layer 2 PE device used for Layer 2 aggregation. The notion of u-PE is described further in [RFC4761]. VE The term VE refers to a VPLS Edge device, which could be either a PE or a u-PE. VPLS Virtual private LAN service. A type of layer 2 VPN.
Imported Objects
| CISCO-IETF-VPLS-GENERIC-MIB | cvplsConfigIndex cvplsPwBindIndex |
| CISCO-SMI | ciscoExperiment |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.140 | IdentityciscoIetfVplsBgpExtMIB | This MIB module enables the use of any underlying Pseudo Wire network. This MIB extends the MIB module published in the RFC 4188 to manage object definitions f… | ||
| 1.3.6.1.4.1.9.10.140.0 | NodeciscoIetfVplsBgpExtMIBNotifs | |||
| 1.3.6.1.4.1.9.10.140.1 | NodeciscoIetfVplsBgpExtMIBObjects | |||
| 1.3.6.1.4.1.9.10.140.1.1 | TableciVplsBgpExtConfigTable | not-accessible | current | This table specifies information for configuring and monitoring BGP-specific parameters for VPLS. A row is automatically created when a VPLS is configured usin… |
| 1.3.6.1.4.1.9.10.140.1.1.1 | RowciVplsBgpExtConfigEntry | not-accessible | current | Each Entry represents a conceptual row in ciVplsBgpExtConfigTable and provides the information about BGP-specific information for VPLS in a packet network. |
| 1.3.6.1.4.1.9.10.140.1.1.1.1 | ColumnciVplsBgpExtConfigRouteDistinguisher | read-write | current | This object represents the Route Distingiusher for this VPLS. |
| 1.3.6.1.4.1.9.10.140.1.1.1.4 | ColumnciVplsBgpExtConfigVERangeSize | read-write | current | This object represents the size of the range of VE identifiers in this VPLS. This number controls the size of the label block advertised for this VE by the PE.… |
| 1.3.6.1.4.1.9.10.140.1.2 | TablecivplsBgpExtRTTable | not-accessible | current | This table specifies information for the list of RTs imported or exported by BGP during auto-discovery of VPLS. |
| 1.3.6.1.4.1.9.10.140.1.2.1 | RowcivplsBgpExtRTEntry | not-accessible | current | Each Entry represents a conceptual row in civplsBgpExtRTTable and provides the information about the value of the RT being used by BGP. Depending on the value … |
| 1.3.6.1.4.1.9.10.140.1.2.1.1 | ColumnciVplsBgpExtRTType | read-create | current | This object represents the type of a RT usage. RTs can be specified to be imported, exported, or both. |
| 1.3.6.1.4.1.9.10.140.1.2.1.2 | ColumnciVplsBgpExtRT | read-create | current | The RT associated with the VPLS service. |
| 1.3.6.1.4.1.9.10.140.1.2.1.3 | ColumnciVplsBgpExtRTStorageType | read-create | current | This object indicates the storage type for this row. |
| 1.3.6.1.4.1.9.10.140.1.2.1.4 | ColumnciVplsBgpExtRTRowStatus | read-create | current | This object is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modifie… |
| 1.3.6.1.4.1.9.10.140.1.3 | TableciVplsBgpExtVETable | not-accessible | current | This table associates VPLS Edge devices to a VPLS. The VEs assigned to a VPLS can be configured on a PE. This table has an expansion dependant relationship wit… |
| 1.3.6.1.4.1.9.10.140.1.3.1 | RowciVplsBgpExtVEEntry | not-accessible | current | Each Entry represents a conceptual row in ciVplsBgpExtVETable and provides the information about VPLS Edge devices. |
| 1.3.6.1.4.1.9.10.140.1.3.1.1 | ColumnciVplsBgpExtVEId | not-accessible | current | This object identifies a VE associated with a VPLS. |
| 1.3.6.1.4.1.9.10.140.1.3.1.2 | ColumnciVplsBgpExtVEName | read-create | current | This object represents the name of the site or u-PE associated with this VE. |
| 1.3.6.1.4.1.9.10.140.1.3.1.3 | ColumnciVplsBgpExtVEPreference | read-create | current | This object represents the preference of the VE if the site is multi-homed and VE Id is used. |
| 1.3.6.1.4.1.9.10.140.1.3.1.5 | ColumnciVplsBgpExtVEStorageType | read-create | current | This object indicates the storage type for this row. |
| 1.3.6.1.4.1.9.10.140.1.3.1.6 | ColumnciVplsBgpExtVERowStatus | read-create | current | This object is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modifie… |
| 1.3.6.1.4.1.9.10.140.1.4 | TableciVplsBgpExtPwBindTable | not-accessible | current | This table provides BGP-specific information for an association between a VPLS and the corresponding Pseudo Wires. A service can have more than one Pseudo Wire… |
| 1.3.6.1.4.1.9.10.140.1.4.1 | RowciVplsBgpExtPwBindEntry | not-accessible | current | Each Entry represents a conceptual row in ciVplsBgpExtPwBindTable and provides the information about BGP-specific information for an association between a VPLS… |
| 1.3.6.1.4.1.9.10.140.1.4.1.1 | ColumnciVplsBgpExtPwBindLocalVEId | read-only | current | This object represents the local VE this Pseudo Wire is associated with. |
| 1.3.6.1.4.1.9.10.140.1.4.1.2 | ColumnciVplsBgpExtPwBindRemoteVEId | read-only | current | This object represents the remote VE this Pseudo Wire is associated with. |
| 1.3.6.1.4.1.9.10.140.2 | NodeciscoIetfVplsBgpExtMIBConform | |||
| 1.3.6.1.4.1.9.10.140.2.1 | NodeciscoIetfVplsBgpExtMIBCompliances | |||
| 1.3.6.1.4.1.9.10.140.2.1.1 | ComplianceciscoIetfVplsBgpExtMIBCompliance | read-only | current | Compliance statement for the entities that implement the ciscoIetfVplsBgpExtMIB module. |
| 1.3.6.1.4.1.9.10.140.2.2 | NodeciscoIetfVplsBgpExtMIBGroups | |||
| 1.3.6.1.4.1.9.10.140.2.2.1 | GroupciVplsBgpExtConfigGroup | current | This group of objects help to configure L2VPN VPLS using BGP. | |
| 1.3.6.1.4.1.9.10.140.2.2.2 | GroupciVplsBgpExtRTGroup | current | The group of objects help to manage RTs for L2VPN VPLS using BGP. | |
| 1.3.6.1.4.1.9.10.140.2.2.3 | GroupciVplsBgpExtVEGroup | current | The group of objects help to manage VE devices for L2VPN VPLS using BGP. | |
| 1.3.6.1.4.1.9.10.140.2.2.4 | GroupciVplsBgpExtPwBindGroup | current | The group of objects help to manage Pseudo Wires for L2VPN VPLS using BGP. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CiVplsBgpExtRouteDistinguisher | OCTET STRING (SIZE (0..256)) | current | This textual convention represents a Route Distinguisher. Please refer to RFC 4364 for more details about the Route Distinguisher. Please refer to draft-ietf-l2vpn-vpls-bgp-08 on the use of a Route Distinguisher for a V… |
| CiVplsBgpExtRouteTarget | OCTET STRING (SIZE (0..256)) | current | This textual convention represents a Route Target. Please refer to RFC 4364 for more details about the Route Target. Please refer to draft-ietf-l2vpn-vpls-bgp-08 on the use of a Route Target for a VPLS. |
| CiVplsBgpExtRouteTargetType | INTEGER { import(1), export(2), both(3) } | current | This textual convention represents the type of a route target usage. Route targets can be specified to be imported, exported, or both. |
| CiVplsBgpExtVEID | Unsigned32 | current | This textual convention represents a VE id. |