CISCO-IF-EXTENSION-MIB
144 objects
A MIB module for extending the IF-MIB (RFC2863) to add objects which provide additional information about interfaces not available in other MIBS. This MIB replaces the OLD-CISCO-INTERFACES-MIB. GLOSSARY : Virtual Switch - A physical switch partitioned into multiple logical switches. Interface Sharing - An interface can be shared among multiple virtual switches. Speed Group - An interface is capable of operating in any one of the speed range depending on the capability of the hardware. Virtual Link (VL) - Virtual Link is a logical connectivity between two end points. A physical interface can have multiple Virtual Links. No Drop Virtual Link - According to 802.3 standard, No drop specifies lossless service on a virtual link. Drop Virtual Link - According to 802.3 standard, Traffic drop may occur on this virtual Link.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | IfOperStatusReason |
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifAdminStatus ifIndex ifName ifOperStatus ifType InterfaceIndexOrZero |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.276 | IdentityciscoIfExtensionMIB | A MIB module for extending the IF-MIB (RFC2863) to add objects which provide additional information about interfaces not available in other MIBS. This MIB repl… | ||
| 1.3.6.1.4.1.9.9.276.0 | NodeciscoIfExtensionMIBNotifications | |||
| 1.3.6.1.4.1.9.9.276.0.1 | NotificationcieLinkDown | current | A cisco specific linkDown notification signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its commun… | |
| 1.3.6.1.4.1.9.9.276.0.2 | NotificationcieLinkUp | current | A cisco specific linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication li… | |
| 1.3.6.1.4.1.9.9.276.0.3 | NotificationcieDelayedLinkUpDownNotif | current | This notification indicates when an interface's operational status has transitioned and remained in that state for a time specified by cieDelayedLinkUpDownDela… | |
| 1.3.6.1.4.1.9.9.276.1 | NodeciscoIfExtensionMIBObjects | |||
| 1.3.6.1.4.1.9.9.276.1.1 | NodeciscoIfExtensionStats | |||
| 1.3.6.1.4.1.9.9.276.1.1.1 | TablecieIfPacketStatsTable | not-accessible | current | This table contains interface packet statistics which are not available in IF-MIB(RFC2863). As an example, some interfaces to which objects in this table are a… |
| 1.3.6.1.4.1.9.9.276.1.1.1.1 | RowcieIfPacketStatsEntry | not-accessible | current | An entry into the cieIfPacketStatsTable. |
| 1.3.6.1.4.1.9.9.276.1.1.1.1.1 | ColumncieIfLastInTime | read-only | current | This object represents the elapsed time in milliseconds since last protocol input packet was received. Discontinuities in the value of this variable can occur … |
| 1.3.6.1.4.1.9.9.276.1.1.1.1.2 | ColumncieIfLastOutTime | read-only | current | This object represents the elapsed time in milliseconds since last protocol output packet was transmitted. Discontinuities in the value of this variable can oc… |
| 1.3.6.1.4.1.9.9.276.1.1.1.1.3 | ColumncieIfLastOutHangTime | read-only | current | This object represents the elapsed time in milliseconds since last protocol output packet could not be successfully transmitted. Discontinuities in the value o… |
| 1.3.6.1.4.1.9.9.276.1.1.1.1.4 | ColumncieIfInRuntsErrs | read-only | current | The number of packets input on a particular physical interface which were dropped as they were smaller than the minimum allowable physical media limit. Discont… |
| 1.3.6.1.4.1.9.9.276.1.1.1.1.5 | ColumncieIfInGiantsErrs | read-only | current | The number of input packets on a particular physical interface which were dropped as they were larger than the ifMtu (largest permitted size of a packet which … |
| 1.3.6.1.4.1.9.9.276.1.1.1.1.6 | ColumncieIfInFramingErrs | read-only | current | The number of input packets on a physical interface which were misaligned or had framing errors. This happens when the format of the incoming packet on a physi… |
| 1.3.6.1.4.1.9.9.276.1.1.1.1.7 | ColumncieIfInOverrunErrs | read-only | current | The number of input packets which arrived on a particular physical interface which were too quick for the hardware to receive and hence the receiver ran out of… |
| 1.3.6.1.4.1.9.9.276.1.1.1.1.8 | ColumncieIfInIgnored | read-only | current | The number of input packets which were simply ignored by this physical interface due to insufficient resources to handle the incoming packets. For example, thi… |
| 1.3.6.1.4.1.9.9.276.1.1.1.1.9 | ColumncieIfInAbortErrs | read-only | current | Number of input packets which were dropped because the receiver aborted. Examples of this could be when an abort sequence aborted the input frame or when there… |
| 1.3.6.1.4.1.9.9.276.1.1.1.1.10 | ColumncieIfInputQueueDrops | read-only | current | The number of input packets which were dropped. Some reasons why this object could be incremented are: o Input queue is full. o Errors at the receiver hardware… |
| 1.3.6.1.4.1.9.9.276.1.1.1.1.11 | ColumncieIfOutputQueueDrops | read-only | current | This object indicates the number of output packets dropped by the interface even though no error had been detected to prevent them being transmitted. The packe… |
| 1.3.6.1.4.1.9.9.276.1.1.1.1.12 | ColumncieIfPacketDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which this interface's counters suffered a discontinuity. If no such discontinuities have occurred since … |
| 1.3.6.1.4.1.9.9.276.1.1.2 | TablecieIfInterfaceTable | not-accessible | current | This table contains objects which provide more information about interface properties not available in IF-MIB (RFC 2863). Some objects defined in this table ma… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1 | RowcieIfInterfaceEntry | not-accessible | current | An entry into the cieIfInterfaceTable. |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.1 | ColumncieIfResetCount | read-only | current | The number of times the interface was internally reset and brought up. Some of the actions which can cause this counter to increment are : o Bringing an interf… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.2 | ColumncieIfKeepAliveEnabled | read-write | current | A keepalive is a small, layer-2 message that is transmitted by a network device to let directly-connected network devices know of its presence. This object ret… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.3 | ColumncieIfStateChangeReason | read-only | current | This object displays a human-readable textual string which describes the cause of the last state change of the interface. Examples of the values this object ca… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.4 | ColumncieIfCarrierTransitionCount | read-only | current | Number of times interface saw the carrier signal transition. For example, if a T1 line is unplugged, then framer will detect the loss of signal (LOS) on the li… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.5 | ColumncieIfInterfaceDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which this interface's counters suffered a discontinuity. If no such discontinuities have occurred since … |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.6 | ColumncieIfDhcpMode | read-write | current | The DHCP mode configured by the administrator. If 'true' the DHCP is enabled. In which case an IP address is requested in DHCP. This is in addition to any that… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.7 | ColumncieIfMtu | read-write | current | The MTU configured by the administrator. This object is exactly same as 'ifMtu' in ifTable from IF-MIB for the same ifIndex value , except that it is configura… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.8 | ColumncieIfContextName | read-only | current | The ContextName denotes the interface 'context' and is used to logically separate the MIB management. RFC 2571 and RFC 2737 describe this approach. When the ag… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.9 | ColumncieIfOperStatusCause | read-only | current | This object represents the detailed operational cause reason for the current operational state of the interface. The current operational state of the interface… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.10 | ColumncieIfOperStatusCauseDescr | read-only | current | The description for the cause of current operational state of the interface, given by the object 'cieIfOperStatusCause'. For an interface whose 'ifOperStatus' … |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.11 | ColumncieIfSpeedReceive | read-only | current | An estimate of the interface's current receive bandwidth in bits per second. This object is provided for interface with asymmetric interface speeds like ADSL a… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.12 | ColumncieIfHighSpeedReceive | read-only | current | An estimate of the interface's current receive bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the int… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.13 | ColumncieIfOwner | read-write | current | This data type is used to model an administratively assigned name of the current owner of the interface resource. This information is taken from the NVT ASCII … |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.14 | ColumncieIfSharedConfig | read-only | current | This object indicates the current configuration of interface sharing on the given interface. 'notApplicable' - the interface sharing configuration on this inte… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.15 | ColumncieIfSpeedGroupConfig | read-write | current | This object specifies the current speed group configuration on the given interface. 'notApplicable' - the interface speed group configuration on this interface… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.16 | ColumncieIfTransceiverFrequencyConfig | read-write | current | This object specifies the current transceiver frequency configuration on the given interface. 'notApplicable' - the interface transceiver frequency configurati… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.17 | ColumncieIfFillPatternConfig | read-write | current | This object specifies the current switchport fill pattern configuration on the given interface. 'arbff8G' - the inter frame gap fill pattern is ARBFF for 8G sp… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.18 | ColumncieIfIgnoreBitErrorsConfig | read-write | current | This object specifies the current switchport biterrors configuration on the given interface. If 'true(1)' the ignore bit errors is enabled.In which case the in… |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.19 | ColumncieIfIgnoreInterruptThresholdConfig | read-write | current | This object specifies the current interrupt threshold configuration on the given interface. 'If 'true(1)' the ignore interrupt thresholds is enabled. In which … |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.20 | ColumncieIfDuplexCfgStatus | read-write | current | This object specifies the configured duplex status on the given interface. |
| 1.3.6.1.4.1.9.9.276.1.1.2.1.21 | ColumncieIfDuplexDetectStatus | read-write | current | This object specifies the detected duplex status on the given interface. |
| 1.3.6.1.4.1.9.9.276.1.1.3 | TablecieIfStatusListTable | not-accessible | current | This table contains objects for providing the 'ifIndex', interface operational mode and interface operational cause for all the interfaces in the modules. This… |
| 1.3.6.1.4.1.9.9.276.1.1.3.1 | RowcieIfStatusListEntry | not-accessible | current | Each entry represents the 'ifIndex', interface operational mode and interface operational cause for a set of 64 interfaces in a module. |
| 1.3.6.1.4.1.9.9.276.1.1.3.1.1 | ColumncieIfStatusListIndex | not-accessible | current | An arbitrary integer value, greater than zero, which identifies a list of 64 interfaces within a module. |
| 1.3.6.1.4.1.9.9.276.1.1.3.1.2 | ColumncieInterfacesIndex | read-only | current | This object represents the 'ifIndex' for a set of 64 interfaces in the module. |
| 1.3.6.1.4.1.9.9.276.1.1.3.1.3 | ColumncieInterfacesOperMode | read-only | current | This object represents the operational mode for a set of 64 interfaces in the module. |
| 1.3.6.1.4.1.9.9.276.1.1.3.1.4 | ColumncieInterfacesOperCause | read-only | current | This object represents the operational status cause for a set of 64 interfaces in the module. |
| 1.3.6.1.4.1.9.9.276.1.1.3.1.5 | ColumncieInterfaceOwnershipBitmap | read-only | current | This object indicates the status for a set of 64 interfaces in a module regarding whether or not each interface is administratively assigned a name of the curr… |
| 1.3.6.1.4.1.9.9.276.1.1.4 | TablecieIfVlStatsTable | not-accessible | current | This table contains VL (Virtual Link) statistics for a capable interface. Objects defined in this table may be applicable to physical interfaces only. |
| 1.3.6.1.4.1.9.9.276.1.1.4.1 | RowcieIfVlStatsEntry | not-accessible | current | Each row contains managed objects for Virtual Link statistics on interface capable of providing this information. |
| 1.3.6.1.4.1.9.9.276.1.1.4.1.1 | ColumncieIfNoDropVlInPkts | read-only | current | This object indicates the number of input packets on all No-Drop Virtual Links belonged to this interface. |
| 1.3.6.1.4.1.9.9.276.1.1.4.1.2 | ColumncieIfNoDropVlInOctets | read-only | current | This object indicates the number of input octets on all No-Drop Virtual Links belonged to this interface. |
| 1.3.6.1.4.1.9.9.276.1.1.4.1.3 | ColumncieIfNoDropVlOutPkts | read-only | current | This object indicates the number of output packets on all No-Drop Virtual Links belonged to this interface. |
| 1.3.6.1.4.1.9.9.276.1.1.4.1.4 | ColumncieIfNoDropVlOutOctets | read-only | current | This object indicates the number of output octets on all No-Drop Virtual Links belonged to this interface. |
| 1.3.6.1.4.1.9.9.276.1.1.4.1.5 | ColumncieIfDropVlInPkts | read-only | current | This object indicates the number of input packets on all Drop Virtual Links belonged to this interface. |
| 1.3.6.1.4.1.9.9.276.1.1.4.1.6 | ColumncieIfDropVlInOctets | read-only | current | This object indicates the number of input octets on all Drop Virtual Links belonged to this interface. |
| 1.3.6.1.4.1.9.9.276.1.1.4.1.7 | ColumncieIfDropVlOutPkts | read-only | current | This object indicates the number of output packets on all Drop Virtual Links belonged to this interface. |
| 1.3.6.1.4.1.9.9.276.1.1.4.1.8 | ColumncieIfDropVlOutOctets | read-only | current | This object indicates the number of output octets on all Drop Virtual Links belonged to this interface. |
| 1.3.6.1.4.1.9.9.276.1.2 | NodeciscoIfExtSystemConfig | |||
| 1.3.6.1.4.1.9.9.276.1.2.1 | ScalarcieSystemMtu | read-write | current | Global system MTU in octets. This object specifies the MTU on all interfaces. However, the value specified by cieIfMtu takes precedence for an interface, which… |
| 1.3.6.1.4.1.9.9.276.1.2.2 | ScalarcieLinkUpDownEnable | read-write | deprecated | Indicates whether cieLinkUp/cieLinkDown or standard mib-II defined linkUp/Down or both, notifications should be generated for the interfaces in the system. 'st… |
| 1.3.6.1.4.1.9.9.276.1.2.3 | ScalarcieStandardLinkUpDownVarbinds | read-write | deprecated | Indicates whether to send the extra varbinds in addition to the varbinds defined in linkUp/linkDown notifications. 'standard' - only send the varbinds defined … |
| 1.3.6.1.4.1.9.9.276.1.2.4 | ScalarcieIfIndexPersistence | read-write | deprecated | This object specifies whether ifIndex values persist across reinitialization of the device. ifIndex persistence means that the mapping between the ifDescr obje… |
| 1.3.6.1.4.1.9.9.276.1.2.5 | TablecieIfIndexPersistenceTable | not-accessible | current | This table lists configuration data relating to ifIndex persistence. This table has a sparse dependent relationship on the ifTable, containing a row for each i… |
| 1.3.6.1.4.1.9.9.276.1.2.5.1 | RowcieIfIndexPersistenceEntry | not-accessible | current | Each entry represents ifindex persistence configuration for an interface specified by ifIndex. Whenever an interface which supports ifindex persistence is crea… |
| 1.3.6.1.4.1.9.9.276.1.2.5.1.1 | ColumncieIfIndexPersistenceEnabled | read-write | deprecated | This object specifies whether the interface's ifIndex value persist across reinitialization. Due to change in syntax, this object is deprecated by cieIfIndexPe… |
| 1.3.6.1.4.1.9.9.276.1.2.5.1.2 | ColumncieIfIndexPersistenceControl | read-write | current | This object specifies whether the interface's ifIndex value persist across reinitialization. In global state, the interface uses the global setting data for pe… |
| 1.3.6.1.4.1.9.9.276.1.2.6 | ScalarcieDelayedLinkUpDownNotifEnable | read-write | current | This object specifies whether the system generates a cieDelayedLinkUpDownNotif notification. |
| 1.3.6.1.4.1.9.9.276.1.2.7 | ScalarcieDelayedLinkUpDownNotifDelay | read-write | current | This object specifies the interval of time an interface's operational status must remain stable following a transition before the system will generate a cieDel… |
| 1.3.6.1.4.1.9.9.276.1.2.8 | ScalarcieIfIndexGlobalPersistence | read-write | current | This object specifies whether ifIndex values persist across reinitialization of the device. ifIndex persistence means that the mapping between the ifDescr obje… |
| 1.3.6.1.4.1.9.9.276.1.2.9 | ScalarcieLinkUpDownConfig | read-write | current | This object specifies whether standard mib-II defined linkUp/ linkDown, extended linkUp/linkDown (with extra varbinds in addition to the varbinds defined in li… |
| 1.3.6.1.4.1.9.9.276.1.3 | NodeciscoIfExtDot1qCustomEtherType | |||
| 1.3.6.1.4.1.9.9.276.1.3.1 | TablecieIfDot1qCustomEtherTypeTable | not-accessible | current | A list of the interfaces that support the 802.1q custom Ethertype feature. |
| 1.3.6.1.4.1.9.9.276.1.3.1.1 | RowcieIfDot1qCustomEtherTypeEntry | not-accessible | current | An entry containing the custom EtherType information for the interface. Only interfaces with custom 802.1q ethertype control are listed in the table. |
| 1.3.6.1.4.1.9.9.276.1.3.1.1.1 | ColumncieIfDot1qCustomAdminEtherType | read-write | current | The Dot1qEtherType allow administrator to select a non-standard (other than 0x8100) 2-byte ethertype for the interface to interoperate with third party vendor'… |
| 1.3.6.1.4.1.9.9.276.1.3.1.1.2 | ColumncieIfDot1qCustomOperEtherType | read-only | current | The current operational value of the 802.1q ethertype for the interface. |
| 1.3.6.1.4.1.9.9.276.1.4 | NodeciscoIfExtUtilization | |||
| 1.3.6.1.4.1.9.9.276.1.4.1 | TablecieIfUtilTable | not-accessible | current | This table contains the interface utilization rates for inbound and outbound traffic on an interface. |
| 1.3.6.1.4.1.9.9.276.1.4.1.1 | RowcieIfUtilEntry | not-accessible | current | An entry containing utilization rates for the interface. Every interface for which the inbound and outbound traffic information is available has a correspondin… |
| 1.3.6.1.4.1.9.9.276.1.4.1.1.1 | ColumncieIfInPktRate | read-only | current | By default, this is the five minute exponentially-decayed moving average of the inbound packet rate for this interface. However, if the corresponding instance … |
| 1.3.6.1.4.1.9.9.276.1.4.1.1.2 | ColumncieIfInOctetRate | read-only | current | By default, this is the five minute exponentially-decayed moving average of the inbound octet rate for this interface. However, if the corresponding instance o… |
| 1.3.6.1.4.1.9.9.276.1.4.1.1.3 | ColumncieIfOutPktRate | read-only | current | By default, this is the five minute exponentially-decayed moving average of the outbound packet rate for this interface. However, if the corresponding instance… |
| 1.3.6.1.4.1.9.9.276.1.4.1.1.4 | ColumncieIfOutOctetRate | read-only | current | By default, this is the five minute exponentially-decayed moving average of the outbound octet rate for this interface. However, if the corresponding instance … |
| 1.3.6.1.4.1.9.9.276.1.4.1.1.5 | ColumncieIfInterval | read-write | current | This object specifies the time interval over which the inbound and outbound traffic rates are calculated for this interface. |
| 1.3.6.1.4.1.9.9.276.1.5 | NodeciscoIfExtDot1dBaseMapping | |||
| 1.3.6.1.4.1.9.9.276.1.5.1 | TablecieIfDot1dBaseMappingTable | not-accessible | current | This table contains the mappings of the ifIndex of an interface to its corresponding dot1dBasePort value. |
| 1.3.6.1.4.1.9.9.276.1.5.1.1 | RowcieIfDot1dBaseMappingEntry | not-accessible | current | An entry containing the mapping between the ifIndex value of an interface and its corresponding dot1dBasePort value. Every interface which has been assigned a … |
| 1.3.6.1.4.1.9.9.276.1.5.1.1.1 | ColumncieIfDot1dBaseMappingPort | read-only | current | The dot1dBasePort value for this interface. |
| 1.3.6.1.4.1.9.9.276.1.6 | NodeciscoIfExtIfNameMapping | |||
| 1.3.6.1.4.1.9.9.276.1.6.1 | TablecieIfNameMappingTable | not-accessible | current | This table contains objects for providing the 'ifName' to 'ifIndex' mapping. This table contains one entry for each valid 'ifName' available in the system. Upo… |
| 1.3.6.1.4.1.9.9.276.1.6.1.1 | RowcieIfNameMappingEntry | not-accessible | current | An entry into the cieIfNameMappingTable. |
| 1.3.6.1.4.1.9.9.276.1.6.1.1.1 | ColumncieIfName | not-accessible | current | Represents an interface name mentioned in the 'ifName' object of this system. |
| 1.3.6.1.4.1.9.9.276.1.6.1.1.2 | ColumncieIfIndex | read-only | current | This object represents the 'ifIndex' corresponding to the interface name mentioned in the 'cieIfName' object of this instance. If the 'ifName' mentioned in the… |
| 1.3.6.1.4.1.9.9.276.2 | NodeciscoIfExtensionMIBConformance | |||
| 1.3.6.1.4.1.9.9.276.2.1 | NodeciscoIfExtensionMIBCompliances | |||
| 1.3.6.1.4.1.9.9.276.2.1.1 | ComplianceciscoIfExtensionMIBCompliance | deprecated | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. | |
| 1.3.6.1.4.1.9.9.276.2.1.2 | ComplianceciscoIfExtensionMIBCompliance1 | read-only | deprecated | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. |
| 1.3.6.1.4.1.9.9.276.2.1.3 | ComplianceciscoIfExtensionMIBCompliance2 | read-only | deprecated | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. |
| 1.3.6.1.4.1.9.9.276.2.1.4 | ComplianceciscoIfExtensionMIBCompliance3 | read-only | deprecated | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. |
| 1.3.6.1.4.1.9.9.276.2.1.5 | ComplianceciscoIfExtensionMIBCompliance4 | read-only | deprecated | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. |
| 1.3.6.1.4.1.9.9.276.2.1.6 | ComplianceciscoIfExtensionMIBCompliance5 | read-only | deprecated | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. |
| 1.3.6.1.4.1.9.9.276.2.1.7 | ComplianceciscoIfExtensionMIBCompliance6 | read-only | deprecated | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. |
| 1.3.6.1.4.1.9.9.276.2.1.8 | ComplianceciscoIfExtensionMIBCompliance7 | read-only | deprecated | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. |
| 1.3.6.1.4.1.9.9.276.2.1.9 | ComplianceciscoIfExtensionMIBCompliance8 | read-only | deprecated | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. |
| 1.3.6.1.4.1.9.9.276.2.1.10 | ComplianceciscoIfExtensionMIBCompliance9 | read-only | deprecated | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. |
| 1.3.6.1.4.1.9.9.276.2.1.11 | ComplianceciscoIfExtensionMIBCompliance10 | read-only | deprecated | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. |
| 1.3.6.1.4.1.9.9.276.2.1.12 | ComplianceciscoIfExtensionMIBCompliance11 | read-only | deprecated | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. |
| 1.3.6.1.4.1.9.9.276.2.1.13 | ComplianceciscoIfExtensionMIBCompliance12 | read-only | deprecated | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. |
| 1.3.6.1.4.1.9.9.276.2.1.14 | ComplianceciscoIfExtensionMIBCompliance13 | read-only | deprecated | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. |
| 1.3.6.1.4.1.9.9.276.2.1.15 | ComplianceciscoIfExtensionMIBCompliance14 | read-only | deprecated | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. |
| 1.3.6.1.4.1.9.9.276.2.1.16 | ComplianceciscoIfExtensionMIBCompliance15 | read-only | current | The compliance statement for entities which implement the CISCO-IF-EXTENSION-MIB. |
| 1.3.6.1.4.1.9.9.276.2.2 | NodeciscoIfExtensionMIBGroups | |||
| 1.3.6.1.4.1.9.9.276.2.2.1 | GroupciscoIfExtensionTablePacketGroup | current | A collection of objects containing packet statistics for a given interface. | |
| 1.3.6.1.4.1.9.9.276.2.2.2 | GroupciscoIfExtensionTableIntfGroup | current | A collection of objects containing information about properties of interfaces. | |
| 1.3.6.1.4.1.9.9.276.2.2.3 | GroupciscoIfExtensionTableIntfGroup1 | deprecated | A collection of objects containing information about properties of interfaces. | |
| 1.3.6.1.4.1.9.9.276.2.2.4 | GroupciscoIfExtensionSystemGroup | current | A collection of objects providing global system-wise information about interfaces. | |
| 1.3.6.1.4.1.9.9.276.2.2.5 | GroupciscoIfExtDot1qEtherTypeGroup | current | A collection of objects providing the information about 802.1q custom EtherType on the interface. | |
| 1.3.6.1.4.1.9.9.276.2.2.6 | GroupciscoIfExtUtilizationGroup | current | A collection of objects containing information about utilization rates of interfaces. | |
| 1.3.6.1.4.1.9.9.276.2.2.7 | GroupciscoIfExtDot1dBaseMappingGroup | current | A collection of objects containing mapping information about the ifIndex values of interfaces and their dot1dBasePort values. | |
| 1.3.6.1.4.1.9.9.276.2.2.8 | GroupciscoIfExtIfNameMappingGroup | current | A collection of objects for the 'ifName' to 'ifIndex' mapping. | |
| 1.3.6.1.4.1.9.9.276.2.2.9 | GroupciscoIfExtensionTableIntfGroup2 | deprecated | A collection of objects containing information about properties of interfaces. | |
| 1.3.6.1.4.1.9.9.276.2.2.10 | GroupcieIfStatusListGroup | current | A collection of objects containing information about set of interfaces. | |
| 1.3.6.1.4.1.9.9.276.2.2.11 | GroupcieLinkUpDownNotifEnableGroup | deprecated | A collection of objects to control 'cieLinkUp/cieLinkDown' and standard mib-II defined 'linkUp/linkDown' notifications. | |
| 1.3.6.1.4.1.9.9.276.2.2.12 | GroupcieLinkUpDownNotifGroup | current | A collection of cisco specific linkUp and linkDown notifications. | |
| 1.3.6.1.4.1.9.9.276.2.2.13 | GroupciscoIfExtensionAsymmetricalSpeedGroup | current | An optional group used to provide information on asymmetrical interface speeds. | |
| 1.3.6.1.4.1.9.9.276.2.2.14 | GroupciscoIfExtUtilIntervalGroup | current | A collection of objects containing information about calculation interval for utilization rate on interfaces. | |
| 1.3.6.1.4.1.9.9.276.2.2.15 | GroupcieIfIndexPersistenceGroup | deprecated | A collection of objects containing information about ifIndex Persistence of interfaces. Since cieIfIndexPersistence and cieIfIndexPersistenceEnabled are deprec… | |
| 1.3.6.1.4.1.9.9.276.2.2.16 | GroupcieDelayedLinkUpDownNotifNotifEnableGroup | current | The group of objects that help configure the cieDelayedLinkUpDownNotif on the system. | |
| 1.3.6.1.4.1.9.9.276.2.2.17 | GroupcieDelayedLinkUpDownNotifNotifGroup | current | A collection for cisco specific delayed trap notifications. | |
| 1.3.6.1.4.1.9.9.276.2.2.18 | GroupcieIfIndexPersistenceControlGroup | current | A collection of objects containing information about ifIndex Persistence of interfaces. | |
| 1.3.6.1.4.1.9.9.276.2.2.19 | GroupciscoIfExtensionTableIntfGroup3 | current | A collection of objects containing information about properties of interfaces. | |
| 1.3.6.1.4.1.9.9.276.2.2.20 | GroupcieIfStatusListGroupSup1 | current | Additional objects containing information about a set of interfaces. | |
| 1.3.6.1.4.1.9.9.276.2.2.21 | GroupcieIfVlStatsGroup | current | Objects containing information about a VL (Virtual Link) statistics on an interface. | |
| 1.3.6.1.4.1.9.9.276.2.2.22 | GroupciscoIfExtensionTableIntfGroup3SupR01 | current | This group is supplement to ciscoIfExtensionTableIntfGroup3. | |
| 1.3.6.1.4.1.9.9.276.2.2.23 | GroupcieLinkUpDownNotifConfigGroup | current | A collection of objects to control 'cieLinkUp/cieLinkDown' and standard mib-II defined 'linkUp/linkDown' notifications. | |
| 1.3.6.1.4.1.9.9.276.2.2.24 | GroupciscoIfExtensionTableIntfGroup3SupR02 | current | This group is supplement to ciscoIfExtensionTableIntfGroup3SupR01. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IfIndexPersistenceState | INTEGER { disable(1), enable(2), global(3) } | current | This textual convention is used to define the state of ifIndex Persistence for both global as well as interface level. The global object, cieIfIndexGlobalPersistence can have two state of ifIndex Persistence i.e. either… |
| InterfaceIndexList | OCTET STRING (SIZE (0..256)) | current | This textual convention defines the 'ifIndex' for a set of 64 interfaces in a module. Each 4 bytes within the value of an object of this type is combined together to represent the interface index of a particular port in… |
| InterfaceOperCauseList | OCTET STRING (SIZE (0..128)) | current | This textual convention defines the operational status cause for a set of 64 interfaces in a module. The operational status cause of an interface is represented by the value defined in the textual convention 'IfOperStat… |
| InterfaceOperModeList | OCTET STRING (SIZE (0..64)) | current | This textual convention defines the operational mode for a set of 64 interfaces in a module. The operational mode of an interface is represented by the value defined in the textual convention 'InterfaceOperMode' (define… |
| InterfaceOwnershipList | OCTET STRING (SIZE (0..8)) | current | This textual convention defines the status for a set of 64 interfaces in a module regarding whether or not each interface is administratively assigned a name of the current owner of the interface resource as per the obj… |