CISCO-IGMP-FILTER-MIB
35 objects
IGMP Filter configuration MIB. This MIB provides a mechanism for users to configure the system to intercept IGMP joins for IP Multicast groups identified in this MIB and only allow certain ports to join certain multicast groups.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TestAndIncr TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.238 | IdentityciscoIGMPFilterMIB | IGMP Filter configuration MIB. This MIB provides a mechanism for users to configure the system to intercept IGMP joins for IP Multicast groups identified in th… | ||
| 1.3.6.1.4.1.9.9.238.1 | NodeciscoIgmpFilterMIBObjects | |||
| 1.3.6.1.4.1.9.9.238.1.1 | NodecIgmpFilterGeneral | |||
| 1.3.6.1.4.1.9.9.238.1.1.1 | ScalarcIgmpFilterEnable | read-write | current | This object controls whether the IGMP filtering is enabled on the device. A false(2) value will prevent the IGMP filtering action on the device. |
| 1.3.6.1.4.1.9.9.238.1.1.2 | ScalarcIgmpFilterMaxProfiles | read-only | current | Indicates the maximum number of profiles supported by this device. A value of zero indicates no limitation on the number of profiles. |
| 1.3.6.1.4.1.9.9.238.1.2 | NodecIgmpFilterInfo | |||
| 1.3.6.1.4.1.9.9.238.1.2.1 | TablecIgmpFilterTable | not-accessible | current | This table contains entries that identify lists of IP Multicast groups for each profile configured on the device. Each entry contains a range of contiguous IP … |
| 1.3.6.1.4.1.9.9.238.1.2.1.1 | RowcIgmpFilterEntry | not-accessible | current | An entry (conceptual row) in the cIgmpFilterTable. The creation, deletion or modification of an entry is controlled through the MIB objects defined under cIgmp… |
| 1.3.6.1.4.1.9.9.238.1.2.1.1.1 | ColumncIgmpFilterProfileIndex | not-accessible | current | Index identifying this entry. |
| 1.3.6.1.4.1.9.9.238.1.2.1.1.2 | ColumncIgmpFilterStartAddressType | not-accessible | current | This object describes the type of Internet address used to determine the start address of IP multicast group for a profile. |
| 1.3.6.1.4.1.9.9.238.1.2.1.1.3 | ColumncIgmpFilterStartAddress | not-accessible | current | This object describes the start of the IP multicast group address of a contiguous range which will be subjected to filtering operation. |
| 1.3.6.1.4.1.9.9.238.1.2.1.1.4 | ColumncIgmpFilterEndAddressType | read-only | current | This object indicates the type of Internet address used to determine the end address of IP multicast group for a profile. |
| 1.3.6.1.4.1.9.9.238.1.2.1.1.5 | ColumncIgmpFilterEndAddress | read-only | current | This object indicates the end of the IP multicast group address of a contiguous range which will be subjected to filtering operation. |
| 1.3.6.1.4.1.9.9.238.1.2.1.1.6 | ColumncIgmpFilterProfileAction | read-only | current | This object defines the action for filtering IGMP reports for this profile. If the object is set to deny(2): then all IGMP reports associated to IP multicast g… |
| 1.3.6.1.4.1.9.9.238.1.2.2 | TablecIgmpFilterInterfaceTable | not-accessible | current | This table contains the list of interfaces that can support IGMP filter feature. |
| 1.3.6.1.4.1.9.9.238.1.2.2.1 | RowcIgmpFilterInterfaceEntry | not-accessible | current | Each entry contains the configuration for associating the IGMP filter profile index with the interface. An entry is created for each of the IGMP filter capable… |
| 1.3.6.1.4.1.9.9.238.1.2.2.1.1 | ColumncIgmpFilterInterfaceProfileIndex | read-write | current | Specifies which IGMP filter profile applies to this interface. If the value of this MIB object matches the value of cIgmpFilterProfileIndex in cIgmpFilterTable… |
| 1.3.6.1.4.1.9.9.238.1.3 | NodecIgmpFilterEditor | |||
| 1.3.6.1.4.1.9.9.238.1.3.1 | ScalarcIgmpFilterEditSpinLock | read-write | current | This object is used to facilitate modification of IGMP Filter Editor Group in the CISCO-IGMP-FILTER-MIB module by multiple managers. In particular, it is usefu… |
| 1.3.6.1.4.1.9.9.238.1.3.2 | ScalarcIgmpFilterEditProfileIndex | read-write | current | Buffer object to edit corresponding object cIgmpFilterProfileIndex in cIgmpFilterTable. Maximum value this object can be set to is determined by cIgmpFilterMax… |
| 1.3.6.1.4.1.9.9.238.1.3.3 | ScalarcIgmpFilterEditStartAddressType | read-write | current | Buffer object to edit corresponding object cIgmpFilterStartAddressType in cIgmpFilterTable. This object describes the type of Internet address used to determin… |
| 1.3.6.1.4.1.9.9.238.1.3.4 | ScalarcIgmpFilterEditStartAddress | read-write | current | Buffer object to edit corresponding object cIgmpFilterStartAddress in cIgmpFilterTable to establish start address of filtering range for a profile. |
| 1.3.6.1.4.1.9.9.238.1.3.5 | ScalarcIgmpFilterEditEndAddressType | read-write | current | Buffer object to edit corresponding object cIgmpFilterEndAddressType in cIgmpFilterTable. This object describes the type of Internet address used to determine … |
| 1.3.6.1.4.1.9.9.238.1.3.6 | ScalarcIgmpFilterEditEndAddress | read-write | current | Buffer object to edit corresponding object cIgmpFilterEndAddress in cIgmpFilterTable to establish end address of filtering range for a profile. |
| 1.3.6.1.4.1.9.9.238.1.3.7 | ScalarcIgmpFilterEditProfileAction | read-write | current | Buffer object to edit corresponding object in cIgmpFilterTable to determine filtering action of each profile. |
| 1.3.6.1.4.1.9.9.238.1.3.8 | ScalarcIgmpFilterEditOperation | read-write | current | The function of this object is to allow user to apply the changes in cIgmpFilterEditor objects to cIgmpFilterTable. This object always has the value 'none' whe… |
| 1.3.6.1.4.1.9.9.238.1.3.9 | ScalarcIgmpFilterApplyStatus | read-only | current | The current status of an 'add', 'delete' or 'modify' operation. If no apply is currently active, the status represented is that of the most recently completed … |
| 1.3.6.1.4.1.9.9.238.2 | NodeciscoIgmpFilterMIBConformance | |||
| 1.3.6.1.4.1.9.9.238.2.1 | NodeciscoIgmpFilterMIBCompliances | |||
| 1.3.6.1.4.1.9.9.238.2.1.1 | ComplianceciscoIgmpFilterGolbalMIBCompliance | deprecated | The compliance statement for entities providing global control of action and implementing IGMP Filter MIB. OBJECT cIgmpFilterEditStartAddressType SYNTAX InetAd… | |
| 1.3.6.1.4.1.9.9.238.2.1.2 | ComplianceciscoIgmpFilterGlobalMIBComplianceRev1 | current | The compliance statement for entities providing global control of action and implementing IGMP Filter MIB. OBJECT cIgmpFilterEditStartAddressType SYNTAX InetAd… | |
| 1.3.6.1.4.1.9.9.238.2.2 | NodeciscoIgmpFilterMIBGroups | |||
| 1.3.6.1.4.1.9.9.238.2.2.1 | GroupciscoIgmpFilterGlobalGroup | current | A collection of objects providing the configuration of IGMP filter for the system. | |
| 1.3.6.1.4.1.9.9.238.2.2.2 | GroupciscoIgmpFilterInfoGroup | current | A collection of objects providing the configuration of IGMP filter for the system. | |
| 1.3.6.1.4.1.9.9.238.2.2.3 | GroupciscoIgmpFilterEditorGroup | current | A collection of objects acting as a buffer to add/delete/modify the entries in read-only table cIgmpFilterTable. |