CISCO-IPSLA-AUTOMEASURE-MIB
58 objects
This module defines the MIB for IP SLA Automation. IP SLA Automation consists of the following: 1. Use of grouping - Group is an aggregation of operations sharing the same type, for example UDP jitter type, with common characteristics like frequency, interval etc. Groups are formed by policies dictated either per customer, or by service level or any other requirements. So, for example, there could be separate groups for customers named Customer A, Customer B etc, or service levels named Gold-service, Silver-service etc. A single group will contain one and only one IP SLA operation definition or reference a single template. 2. Use of templates - It has been observed that operations can be configured quickly if the variants such as IP address and ports can be configured separately and then combined with a template consisting of invariants. This allows for re-use of the invariant template with various combinations of destination addresses and ports, the benefits for which are multiplied when considering groupings. 3. Auto operations - With this feature the software will try to automatically kickstart operations by making intelligent assumptions. For example, if no specific operation is referenced by the group configuration then an ICMP jitter operation is assumed by default.
Imported Objects
| CISCO-IPSLA-TC-MIB | IpSlaOperType IpSlaReactVar |
| CISCO-SMI | ciscoMgmt |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.633 | IdentityciscoIpSlaAutoMIB | This module defines the MIB for IP SLA Automation. IP SLA Automation consists of the following: 1. Use of grouping - Group is an aggregation of operations shar… | ||
| 1.3.6.1.4.1.9.9.633.0 | NodeciscoIpSlaAutoMIBNotifs | |||
| 1.3.6.1.4.1.9.9.633.1 | NodeciscoIpSlaAutoMIBObjects | |||
| 1.3.6.1.4.1.9.9.633.1.1 | TablecipslaAutoGroupTable | not-accessible | current | A table that contains IP SLA auto measure group definitions. |
| 1.3.6.1.4.1.9.9.633.1.1.1 | RowcipslaAutoGroupEntry | not-accessible | current | An entry containing the configurations for a particular auto measure group. |
| 1.3.6.1.4.1.9.9.633.1.1.1.1 | ColumncipslaAutoGroupName | not-accessible | current | A group name which is used by a management application to identify the group. |
| 1.3.6.1.4.1.9.9.633.1.1.1.2 | ColumncipslaAutoGroupDescription | read-create | current | This field is used to provide description for the group. |
| 1.3.6.1.4.1.9.9.633.1.1.1.3 | ColumncipslaAutoGroupDestinationName | read-create | current | This object refers to the cipslaAutoGroupDestName in cipslaAutoGroupDestTable. If the name entered is not present in cipslaAutoGroupDestTable, then when group … |
| 1.3.6.1.4.1.9.9.633.1.1.1.4 | ColumncipslaAutoGroupADDestPort | read-create | current | This object represents the destination port number for auto discovery use. |
| 1.3.6.1.4.1.9.9.633.1.1.1.5 | ColumncipslaAutoGroupOperTemplateName | read-create | current | A string which is used by a management application to identify the template which is associated with the group. Depends on cipslaAutoGroupOperType, this object… |
| 1.3.6.1.4.1.9.9.633.1.1.1.6 | ColumncipslaAutoGroupSchedulerId | read-create | current | This object refers to the cipslaAutoGroupSchedId in cipslaAutoGroupSchedTable, and is used to schedule this group. |
| 1.3.6.1.4.1.9.9.633.1.1.1.7 | ColumncipslaAutoGroupQoSEnable | read-create | current | When this object is set to true, QoS is enabled for this group and this group is linked to policy map. The restriction is that after QoS is enabled, it can not… |
| 1.3.6.1.4.1.9.9.633.1.1.1.8 | ColumncipslaAutoGroupOperType | read-create | current | This object specifies the type of IP SLA operation. When operation type is not ICMP jitter, then cipslaAutoGroupOperTemplateName must be specified. |
| 1.3.6.1.4.1.9.9.633.1.1.1.9 | ColumncipslaAutoGroupDestIPADEnable | read-create | current | When this object is set to true, destination IP address is populated through auto-discovery. |
| 1.3.6.1.4.1.9.9.633.1.1.1.10 | ColumncipslaAutoGroupADMeasureRetry | read-create | current | This object specifies number of measurement retries to be attempted for the discovered end point after the connection to the end point is broken. If there is n… |
| 1.3.6.1.4.1.9.9.633.1.1.1.11 | ColumncipslaAutoGroupADDestIPAgeout | read-create | current | This object represents the ageout time for the discovered end point. If the end point becomes inactive for the period of ageout time, the end point will be rem… |
| 1.3.6.1.4.1.9.9.633.1.1.1.12 | ColumncipslaAutoGroupStorageType | read-create | current | The storage type of this conceptual row. |
| 1.3.6.1.4.1.9.9.633.1.1.1.13 | ColumncipslaAutoGroupRowStatus | read-create | current | The status of the conceptual group control row. When the status is active, the other writable objects may be modified unless the scheduler with name specified … |
| 1.3.6.1.4.1.9.9.633.1.2 | TablecipslaAutoGroupDestTable | not-accessible | current | A table contains the list of destination IP addresses and ports associated to the auto measure group destination name. |
| 1.3.6.1.4.1.9.9.633.1.2.1 | RowcipslaAutoGroupDestEntry | not-accessible | current | An entry containing the destination IP addresses and port configurations associated to auto measure group destination name. |
| 1.3.6.1.4.1.9.9.633.1.2.1.1 | ColumncipslaAutoGroupDestName | not-accessible | current | This is the name for an auto measure group destination. |
| 1.3.6.1.4.1.9.9.633.1.2.1.2 | ColumncipslaAutoGroupDestIpAddrType | not-accessible | current | The type of the internet address of a destination for an auto measure group. |
| 1.3.6.1.4.1.9.9.633.1.2.1.3 | ColumncipslaAutoGroupDestIpAddr | not-accessible | current | The internet address of a destination for an auto measure group. The type of this address is determined by the value of cipslaAutoGroupDestIpAddrType. |
| 1.3.6.1.4.1.9.9.633.1.2.1.4 | ColumncipslaAutoGroupDestPort | not-accessible | current | This object represents the destination port number. For ICMP echo and ICMP jitter, the suggested value is '0'. |
| 1.3.6.1.4.1.9.9.633.1.2.1.5 | ColumncipslaAutoGroupDestStorageType | read-create | current | The storage type of this conceptual row. By default the entry will be saved into non-volatile memory. |
| 1.3.6.1.4.1.9.9.633.1.2.1.6 | ColumncipslaAutoGroupDestRowStatus | read-create | current | The status of the conceptual destination table control row. No other objects in this row need to be set before this object can become active. During 'destroy',… |
| 1.3.6.1.4.1.9.9.633.1.3 | TablecipslaReactTable | not-accessible | current | A table that contains reaction configurations for templates. Each conceptual row in cipslaReactTable corresponds to a reaction configured for one template. Eac… |
| 1.3.6.1.4.1.9.9.633.1.3.1 | RowcipslaReactEntry | not-accessible | current | A base list of objects that define a conceptual reaction configuration control row. |
| 1.3.6.1.4.1.9.9.633.1.3.1.1 | ColumncipslaReactConfigIndex | not-accessible | current | This object along with cipslaAutoGroupOperType and cipslaAutoGroupOperTemplateName identifies a particular reaction-configuration for one IP SLA template. This… |
| 1.3.6.1.4.1.9.9.633.1.3.1.2 | ColumncipslaReactVar | read-create | current | This object specifies the type of reaction configured for an IP SLA template. Default value is 'rtt' for ICMP echo, UDP echo and TCP connect. Default value is … |
| 1.3.6.1.4.1.9.9.633.1.3.1.3 | ColumncipslaReactThresholdType | read-create | current | This object specifies the conditions under which a notification ( trap ) is sent. The rttMonReactOccurred object defined in rttMonReactTable in CISCO-RTTMON-MI… |
| 1.3.6.1.4.1.9.9.633.1.3.1.4 | ColumncipslaReactActionType | read-create | current | Specifies what type, if any, of reaction to generate if one of the watched (reaction-configuration ) conditions is satisfied: none(1) - no reaction is generate… |
| 1.3.6.1.4.1.9.9.633.1.3.1.5 | ColumncipslaReactThresholdRising | read-create | current | This object defines the higher threshold limit. If the value ( e.g rtt, jitterAvg, packetLossSD etc ) rises above this limit and if the condition specified in … |
| 1.3.6.1.4.1.9.9.633.1.3.1.6 | ColumncipslaReactThresholdFalling | read-create | current | This object defines a lower threshold limit. If the value ( e.g rtt, jitterAvg, packetLossSD etc ) falls below this limit and if the condition specified in cip… |
| 1.3.6.1.4.1.9.9.633.1.3.1.7 | ColumncipslaReactThresholdCountX | read-create | current | If cipslaReactThresholdType value is 'xOfy', this object defines the 'x' value. If cipslaReactThresholdType value is 'consecutive' this object defines the numb… |
| 1.3.6.1.4.1.9.9.633.1.3.1.8 | ColumncipslaReactThresholdCountY | read-create | current | This object defines the 'y' value of the xOfy condition if cipslaReactThresholdType is 'xOfy'. The default for the 'y' value is 5. For other values of cipslaRe… |
| 1.3.6.1.4.1.9.9.633.1.3.1.9 | ColumncipslaReactStorageType | read-create | current | The storage type of this conceptual row. By default the entry will be saved into non-volatile memory. |
| 1.3.6.1.4.1.9.9.633.1.3.1.10 | ColumncipslaReactRowStatus | read-create | current | This objects indicates the status of the conceptual Reaction Control Row. When this object moves to active state, the conceptual row is monitored and notificat… |
| 1.3.6.1.4.1.9.9.633.1.4 | TablecipslaAutoGroupSchedTable | not-accessible | current | A table of group scheduling definitions. |
| 1.3.6.1.4.1.9.9.633.1.4.1 | RowcipslaAutoGroupSchedEntry | not-accessible | current | A list of objects that define specific configuration for group scheduling. |
| 1.3.6.1.4.1.9.9.633.1.4.1.1 | ColumncipslaAutoGroupSchedId | not-accessible | current | This string uniquely identifies a row in the cipslaAutoGroupSchedTable. |
| 1.3.6.1.4.1.9.9.633.1.4.1.2 | ColumncipslaAutoGroupSchedPeriod | read-create | current | Specifies the time duration between initiating two IP SLA operations generated via the auto measure group. |
| 1.3.6.1.4.1.9.9.633.1.4.1.3 | ColumncipslaAutoGroupSchedInterval | read-create | current | Specifies the duration between initiating each RTT operation for one IP SLA operation generated via the auto measure group. The value of this object is only ef… |
| 1.3.6.1.4.1.9.9.633.1.4.1.4 | ColumncipslaAutoGroupSchedLife | read-create | current | This object specifies the life of all the operations that are getting group scheduled. This value will be placed into cipslaAutoGroupSchedRttLife object when t… |
| 1.3.6.1.4.1.9.9.633.1.4.1.5 | ColumncipslaAutoGroupSchedAgeout | read-create | current | This object specifies the ageout value of the operations that are getting group scheduled. This value will be placed into rttMonSchedAdminConceptRowAgeout obje… |
| 1.3.6.1.4.1.9.9.633.1.4.1.6 | ColumncipslaAutoGroupSchedMaxInterval | read-create | current | Specifies the max duration between initiating each RTT operation for one IP SLA operation in the group. |
| 1.3.6.1.4.1.9.9.633.1.4.1.7 | ColumncipslaAutoGroupSchedMinInterval | read-create | current | Specifies the min duration between initiating each RTT operation for one IP SLA operation in the group. The value of this object should be lower than the value… |
| 1.3.6.1.4.1.9.9.633.1.4.1.8 | ColumncipslaAutoGroupSchedStartTime | read-create | current | This is the time in seconds after which the operations of the associated groups will take transition to active state. When set to the value other than '1' (pen… |
| 1.3.6.1.4.1.9.9.633.1.4.1.9 | ColumncipslaAutoGroupSchedStorageType | read-create | current | The storage type of this conceptual row. By default the entry will be saved into non-volatile memory. |
| 1.3.6.1.4.1.9.9.633.1.4.1.10 | ColumncipslaAutoGroupSchedRowStatus | read-create | current | The status of the conceptual group schedule control row. When the status is active and the value of cipslaAutoGroupSchedStartTime is '1', the other writable ob… |
| 1.3.6.1.4.1.9.9.633.2 | NodeciscoIpSlaAutoMIBConform | |||
| 1.3.6.1.4.1.9.9.633.2.1 | NodeciscoIpSlaAutoMIBCompliances | |||
| 1.3.6.1.4.1.9.9.633.2.1.1 | ComplianceciscoIpSlaAutoMIBCompliance | current | The compliance statement for IP SLA (1) Auto Measure Group Table (2) Destination Table (3) Reaction Table (4) Group Schedule Table | |
| 1.3.6.1.4.1.9.9.633.2.2 | NodeciscoIpSlaAutoMIBGroups | |||
| 1.3.6.1.4.1.9.9.633.2.2.1 | GroupciscoIpSlaAutoGroupConfGroup | current | A collection of objects related to IP SLA auto meaure group configuration. | |
| 1.3.6.1.4.1.9.9.633.2.2.2 | GroupciscoIpSlaAutoGroupDestGroup | current | A collection of objects related to IP SLA auto measure group destination configuration. | |
| 1.3.6.1.4.1.9.9.633.2.2.3 | GroupciscoIpSlaAutoGroupReactGroup | current | A collection of objects related to IP SLA auto measure reaction configuration. | |
| 1.3.6.1.4.1.9.9.633.2.2.4 | GroupciscoIpSlaAutoGroupSchedGroup | current | A collection of objects related to IP SLA auto measure group schedule configuration. |