MIB Viewer

CISCO-ISDNU-IF-MIB

29 objects
ISDN BRI integrated U Interface MIB module. This MIB manages the ISDN BRI integrated U Interface in the router.
Imported Objects
CISCO-SMIciscoMgmt
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCDisplayString TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.9.18IdentityciscoIsdnuIfMIBISDN BRI integrated U Interface MIB module. This MIB manages the ISDN BRI integrated U Interface in the router.
1.3.6.1.4.1.9.9.18.1NodeciuIfObjects
1.3.6.1.4.1.9.9.18.1.1NodeciuInterface
1.3.6.1.4.1.9.9.18.1.1.1TableciuIfStaticConfigTablenot-accessiblecurrentThe ISDN BRI integrated U interface Static Configuration Table. It contains items that are statically configured by reading configuration from hardware and can…
1.3.6.1.4.1.9.9.18.1.1.1.1RowciuIfStaticConfigEntrynot-accessiblecurrentAn entry in the static configuration table for each ISDN BRI integrated U interface.
1.3.6.1.4.1.9.9.18.1.1.1.1.1ColumnciuIfTyperead-onlycurrentSpecifies the type of ISDN BRI integrated U interface. other - none of the following. addOnU - An add-On card with ISDN BRI integrated U interface. onBoardU - …
1.3.6.1.4.1.9.9.18.1.1.2TableciuIfStatusTablenot-accessiblecurrentThe ISDN BRI integrated U interface Status Table. Contains information about the status of the ISDN U interface, including the error statistics and current act…
1.3.6.1.4.1.9.9.18.1.1.2.1RowciuIfStatusEntrynot-accessiblecurrentAn entry in the status table for each ISDN BRI integrated U interface.
1.3.6.1.4.1.9.9.18.1.1.2.1.1ColumnciuIfStatusread-onlycurrentThis object contains the operation status of the ISDN BRI integrated U interface. activated - The ISDN U interface is activated. The interface is active and da…
1.3.6.1.4.1.9.9.18.1.1.2.1.2ColumnciuIfEocCommandread-onlycurrentThe last EOC command sent by Central Office; the ECO command supports operations communications needs between the network and ISDN U interface.
1.3.6.1.4.1.9.9.18.1.1.2.1.3ColumnciuIfOverHeadBitsread-onlycurrentThis object describes 5 attributes of Overhead bits. The Overhead bits contains the ISDN U interface transceiver operations and maintenance functions that are …
1.3.6.1.4.1.9.9.18.1.1.2.1.4ColumnciuIfFebeErrorsread-onlycurrentNumber of Far End Block Errors (FEBE) detected since last boot. Whenever the CO (Central Office) receives a block of data from the router with a CRC error, the…
1.3.6.1.4.1.9.9.18.1.1.2.1.5ColumnciuIfNebeErrorsread-onlycurrentNumber of Near End Block Errors (NEBE) detected since last boot. Whenever the U transceiver receives a block of data with a CRC error, the NEBE count is increm…
1.3.6.1.4.1.9.9.18.1.1.2.1.6ColumnciuIfLoopStatusread-onlycurrentCurrent ISDN BRI integrated U interface Loop status and NT maintenance mode. The definition of maintenance modes are as follows: none - The U interface is not …
1.3.6.1.4.1.9.9.18.1.2NodeciuIfExternalSTPort
1.3.6.1.4.1.9.9.18.1.2.1TableciuIfExternalSTPortStatusTablenot-accessiblecurrentThe external S/T port status table. It contains the operation status of the external ISDN S/T ports.
1.3.6.1.4.1.9.9.18.1.2.1.1RowciuIfExternalSTPortStatusEntrynot-accessiblecurrentAn entry in the status table for each external ISDN S/T port.
1.3.6.1.4.1.9.9.18.1.2.1.1.1ColumnciuIfExternalSTPortNumbernot-accessiblecurrentThe external ISDN S/T port number.
1.3.6.1.4.1.9.9.18.1.2.1.1.2ColumnciuIfExternalSTPortStatusread-onlycurrentThis object contains the operation status of the external ISDN S/T port. activated - The external ISDN S/T port is activated. The port is active and data can b…
1.3.6.1.4.1.9.9.18.1.3NodeciuIfMIBNotificationEnables
1.3.6.1.4.1.9.9.18.1.3.1ScalarciuIfEnableULoopStatusNotificationread-writecurrentIndicates whether or not an ISDN BRI integrated U interface Loop status notification (ciuIfLoopStatusNotification) will be generated by this router.
1.3.6.1.4.1.9.9.18.2NodeciuIfMIBNotificationPrefix
1.3.6.1.4.1.9.9.18.2.0NodeciuIfMIBNotifications
1.3.6.1.4.1.9.9.18.2.0.1NotificationciuIfLoopStatusNotificationcurrentA ciuIfLoopStatusNotification is sent when there is a change in ciscoIsdnuIfLoopStatus object. The status change occurs when the ISDN BRI integrated U interfac…
1.3.6.1.4.1.9.9.18.3NodeciuIfMIBConformance
1.3.6.1.4.1.9.9.18.3.1NodeciuIfMIBCompliances
1.3.6.1.4.1.9.9.18.3.1.1ComplianceciuIfMIBCompliancecurrentThe compliance statement for entities which implement the Cisco ISDN BRI integrated U interface MIB
1.3.6.1.4.1.9.9.18.3.2NodeciuIfMIBGroups
1.3.6.1.4.1.9.9.18.3.2.1GroupciuIfMIBGroupcurrentThe collection of objects providing information about the Cisco ISDN BRI integrated U interface.