CISCO-ITP-MSU-RATES-MIB
60 objects
This MIB provides information used to manage the number of MTP3 MSUs transmitted and received per processor. Many of the higher level protocols require several MSUs per transaction. Traffic capacity planning is based on MSUs not transactions. This MIB will provide information to determine current traffic. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signalling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signalling System No. 7.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | EntPhysicalIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.529 | IdentityciscoItpMsuRatesMIB | This MIB provides information used to manage the number of MTP3 MSUs transmitted and received per processor. Many of the higher level protocols require several… | ||
| 1.3.6.1.4.1.9.9.529.0 | NodeciscoItpMsuRatesMIBNotifs | |||
| 1.3.6.1.4.1.9.9.529.0.1 | NotificationciscoItpMsuRateState | current | This notification is generated once for the interval specified by the cimrMsuRateNotifyInterval object when the cimrMsuTrafficRateState object has the followin… | |
| 1.3.6.1.4.1.9.9.529.1 | NodeciscoItpMsuRatesMIBObjects | |||
| 1.3.6.1.4.1.9.9.529.1.1 | NodecimrScalars | |||
| 1.3.6.1.4.1.9.9.529.1.1.4 | ScalarcimrMsuRateSampleInterval | read-write | current | The length of the interval used to calculate MSU rate. |
| 1.3.6.1.4.1.9.9.529.1.1.5 | ScalarcimrMsuRateNotifyInterval | read-write | current | The length of the interval used to suppress ciscoItpMsuRcvdRateState and ciscoItpMsuSentRateState notifications. |
| 1.3.6.1.4.1.9.9.529.1.1.6 | ScalarcimrMsuRateNotifyEnable | read-write | current | The MSU rate notification truth value. This object controls the generation of ciscoItpMsuRcvdRateState and ciscoItpMsuSentRateState notifications. 'true' Indic… |
| 1.3.6.1.4.1.9.9.529.1.1.7 | ScalarcimrMsuRateAcceptableThreshold | read-write | current | This object is used to establish a default value for all instances of the cimrMsuProcAcceptableThreshold object in the cimrMsuProcTable table. The value for th… |
| 1.3.6.1.4.1.9.9.529.1.1.8 | ScalarcimrMsuRateWarningThreshold | read-write | current | This object is used to establish a default value for all instances of the cimrMsuProcWarningThreshold object in the cimrMsuProcTable table. The value for this … |
| 1.3.6.1.4.1.9.9.529.1.1.9 | ScalarcimrMsuRateOverloadedThreshold | read-write | current | This object is used to establish a default value for all instances of the cimrMsuProcOverloadedThreshold object in the cimrMsuProcTable table. The value for th… |
| 1.3.6.1.4.1.9.9.529.1.2 | NodecimrTables | |||
| 1.3.6.1.4.1.9.9.529.1.2.1 | TablecimrMsuProcTable | not-accessible | current | This table provides information associated with each processor. Thresholds are provided to control the behavior of the following objects from the cimrMsuTraffi… |
| 1.3.6.1.4.1.9.9.529.1.2.1.1 | RowcimrMsuProcEntry | not-accessible | current | Each entry represents a processor and is updated at end of interval specified by the cimrMsuRateSampleInterval object. |
| 1.3.6.1.4.1.9.9.529.1.2.1.1.1 | ColumncimrMsuProcIndex | not-accessible | current | An index that uniquely represents a processor. This index is assigned arbitrarily by the engine and is not saved over reboots. |
| 1.3.6.1.4.1.9.9.529.1.2.1.1.2 | ColumncimrMsuProcPhysicalIndex | read-only | current | The entPhysicalIndex of the physical entity for which the MSU measurements in this entry are maintained. The exact type of this entity is described by its entP… |
| 1.3.6.1.4.1.9.9.529.1.2.1.1.3 | ColumncimrMsuProcAcceptableThreshold | read-write | current | This object is used to specify a level of traffic below which the traffic is considered to be acceptable. All changes to this threshold will take effect at the… |
| 1.3.6.1.4.1.9.9.529.1.2.1.1.4 | ColumncimrMsuProcWarningThreshold | read-write | current | This object is used to specify a level of traffic that indicates a rate that is above acceptable level, but is below level that impacts routing of MSUs. All ch… |
| 1.3.6.1.4.1.9.9.529.1.2.1.1.5 | ColumncimrMsuProcOverloadedThreshold | read-write | current | This object is used to specify a level of traffic that indicates a rate that may impact routing of MSUs. All changes to this threshold will take effect at the … |
| 1.3.6.1.4.1.9.9.529.1.2.1.1.6 | ColumncimrMsuProcReset | read-write | current | This object object always returns the 'false' value. Setting the object to 'true' resets the following objects. cimrMsuProcDurWarning cimrMsuProcDurOverloaded … |
| 1.3.6.1.4.1.9.9.529.1.2.1.1.7 | ColumncimrMsuProcResetTimestamp | read-only | current | The value of sysUpTime when the measurements were reset by setting the cimrMsuProcReset object or by changing any of the following objects. cimrMsuRateSampleIn… |
| 1.3.6.1.4.1.9.9.529.1.2.1.1.8 | ColumncimrMsuProcSlotNumber | read-only | current | The number of slot contain processor and will be set to zero when platform does not support processsors in multiple slots. |
| 1.3.6.1.4.1.9.9.529.1.2.1.1.9 | ColumncimrMsuProcBayNumber | read-only | current | The number of bay contain processor and will be set to zero when platform does not support processsors in multiple bays. |
| 1.3.6.1.4.1.9.9.529.1.2.2 | TablecimrMsuTrafficTable | not-accessible | current | This table provides information on the traffic in MUS for each processor in both directions. Any MSU in which a processor is involved will be counted. Here are… |
| 1.3.6.1.4.1.9.9.529.1.2.2.1 | RowcimrMsuTrafficEntry | not-accessible | current | Each entry represents a processor traffic in a particular direction and is updated at end of interval specified by the cimrMsuRateSampleInterval object. |
| 1.3.6.1.4.1.9.9.529.1.2.2.1.1 | ColumncimrMsuTrafficDirection | not-accessible | current | The direction of traffic on a processor. |
| 1.3.6.1.4.1.9.9.529.1.2.2.1.2 | ColumncimrMsuTrafficRateState | read-only | current | The state of traffic load for a particular direction and is calculated using the following objects. - cimrMsuTrafficRcvdRate - cimrMsuRateAcceptableThreshold -… |
| 1.3.6.1.4.1.9.9.529.1.2.2.1.3 | ColumncimrMsuTrafficRate | read-only | current | Rate of MSUs over the interval specified by the cimrMsuRateSampleInterval object. |
| 1.3.6.1.4.1.9.9.529.1.2.2.1.4 | ColumncimrMsuTrafficSize | read-only | current | The average size of MSU over the interval specified by the cimrMsuRateSampleInterval object. |
| 1.3.6.1.4.1.9.9.529.1.2.2.1.5 | ColumncimrMsuTrafficDurWarning | read-only | current | The number of seconds the cimrMsuTrafficRateState was in the 'warning' state. |
| 1.3.6.1.4.1.9.9.529.1.2.2.1.6 | ColumncimrMsuTrafficDurOverloaded | read-only | current | The number of seconds the cimrMsuTrafficRateState was in the 'overloaded' state. |
| 1.3.6.1.4.1.9.9.529.1.2.2.1.7 | ColumncimrMsuTrafficMaxRate | read-only | current | Maximum value for the cimrMsuTrafficRate object since Setting this object to zero will clear the cimrMsuTrafficMaxTimestamp until the need next interval inform… |
| 1.3.6.1.4.1.9.9.529.1.2.2.1.8 | ColumncimrMsuTrafficMaxTimestamp | read-only | current | Time and date when cimrMsuTrafficMaxRate was last set or zero when object was cleared. |
| 1.3.6.1.4.1.9.9.529.1.2.2.1.9 | ColumncimrMsuTrafficMSUs | read-only | current | The total number of MSU handled by this processor. |
| 1.3.6.1.4.1.9.9.529.1.2.3 | TablecimrMsuDistTable | not-accessible | current | This table provides distribution of MSU rates per processor in both the transmit and receive directions. The MSU rates are converted into percentages by the cu… |
| 1.3.6.1.4.1.9.9.529.1.2.3.1 | RowcimrMsuDistEntry | not-accessible | current | Each entry represents a processor and is updated at end of interval specified by the cimrMsuRateSampleInterval object. |
| 1.3.6.1.4.1.9.9.529.1.2.3.1.1 | ColumncimrMsuDist000to009Seconds | read-only | current | The total number of seconds during which the MSU rate for this processor was from 0 to 9 percent of the current overloaded-threshold value. |
| 1.3.6.1.4.1.9.9.529.1.2.3.1.2 | ColumncimrMsuDist010to019Seconds | read-only | current | The total number of seconds during which the MSU rate for this processor was from 10 to 19 percent of the current overloaded-threshold value. |
| 1.3.6.1.4.1.9.9.529.1.2.3.1.3 | ColumncimrMsuDist020to029Seconds | read-only | current | The total number of seconds during which the MSU rate for this processor was from 20 to 29 percent of the current overloaded-threshold value. |
| 1.3.6.1.4.1.9.9.529.1.2.3.1.4 | ColumncimrMsuDist030to039Seconds | read-only | current | The total number of seconds during which the MSU rate for this processor was from 30 to 39 percent of the current overloaded-threshold value. |
| 1.3.6.1.4.1.9.9.529.1.2.3.1.5 | ColumncimrMsuDist040to049Seconds | read-only | current | The total number of seconds during which the MSU rate for this processor was from 40 to 49 percent of the current overloaded-threshold value. |
| 1.3.6.1.4.1.9.9.529.1.2.3.1.6 | ColumncimrMsuDist050to059Seconds | read-only | current | The total number of seconds during which the MSU rate for this processor was from 50 to 59 percent of the current overloaded-threshold value. |
| 1.3.6.1.4.1.9.9.529.1.2.3.1.7 | ColumncimrMsuDist060to069Seconds | read-only | current | The total number of seconds during which the MSU rate for this processor was from 60 to 69 percent of the current overloaded-threshold value. |
| 1.3.6.1.4.1.9.9.529.1.2.3.1.8 | ColumncimrMsuDist070to079Seconds | read-only | current | The total number of seconds during which the MSU rate for this processor was from 70 to 79 percent of the current overloaded-threshold value. |
| 1.3.6.1.4.1.9.9.529.1.2.3.1.9 | ColumncimrMsuDist080to089Seconds | read-only | current | The total number of seconds during which the MSU rate for this processor was from 80 to 89 percent of the current overloaded-threshold value. |
| 1.3.6.1.4.1.9.9.529.1.2.3.1.10 | ColumncimrMsuDist090orAbove | read-only | current | The total number of seconds during which the MSU rate for this processor was above 90 percent of the current overloaded-threshold value. |
| 1.3.6.1.4.1.9.9.529.2 | NodeciscoItpMsuRatesMIBConform | |||
| 1.3.6.1.4.1.9.9.529.2.1 | NodeciscoItpMsuRatesMIBCompliances | |||
| 1.3.6.1.4.1.9.9.529.2.1.1 | ComplianceciscoItpMsuRatesMIBCompliance | deprecated | The compliance statement for entities which implement the CISCO-ITP-MSU-RATES-MIB.my MIB | |
| 1.3.6.1.4.1.9.9.529.2.1.2 | ComplianceciscoItpMsuRatesMIBCompliancesRev1 | current | The compliance statement for entities which implement the CISCO-ITP-MSU-RATES-MIB.my MIB | |
| 1.3.6.1.4.1.9.9.529.2.2 | NodeciscoItpMsuRatesMIBGroups | |||
| 1.3.6.1.4.1.9.9.529.2.2.1 | GroupciscoItpMsuRatesScalarsGroup | current | Objects used control collection MSU rates. | |
| 1.3.6.1.4.1.9.9.529.2.2.2 | GroupciscoItpMsuRatesObjects | current | ITP MSU rates object group. | |
| 1.3.6.1.4.1.9.9.529.2.2.3 | GroupciscoItpMsuDistObjects | current | ITP MSU distribution object group. | |
| 1.3.6.1.4.1.9.9.529.2.2.4 | GroupciscoItpMsuRatesNotifyGroup | current | ITP MSU state notification group. | |
| 1.3.6.1.4.1.9.9.529.2.2.5 | GroupciscoItpMsuRatesObjectsRev1 | current | ITP total MSU handled by processor. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CimrMsuRateState | INTEGER { acceptable(1), warning(2), overloaded(3) } | current | MSU Rate State: 'acceptable' - traffic for a specified direction is at the acceptable level. 'warning' - traffic for a specified direction is has reached or exceed warning level but is below the overloaded level. 'overl… |
| CimrMsuThreshold | Unsigned32 (0 | 100..4294967295 ) | current | This textual convention defines a threshold used to monitor the rate of MSUs per second. The zero value is used to indicate that value has not been specified. It is important to note that the MSU thresholds should be ba… |
| CirbhMsuCurrentCount | Gauge32 | current | The value of this counter starts from zero and is increased when associated events occur, until and administrative operation in performed that requires the associated objects to be cleared. |
| CirbhMsuTrafficDirection | INTEGER { receive(1), transmit(2) } | current | Direction of traffic on an processor. |