CISCO-ITP-TC-MIB
80 objects
The defines textual conventions used by to manage devices related to the SS7 network. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signalling System No. 7. Abbreviations: CDPA - Called Party Point Code CGPA - Calling Party Point Code CLLI - Common Language Location Codes CR - Connection Request message CREF - Connection Refusal message DPC - Destination Point Code ERR - Error message GTA - Global Title Address GTI - Global Title Indicator GTT - Global Title Translation LUDT - long unitdata message LUDTS - long unitdata service message M2PA - MTP2 Peer-to-Peer Adaptation Layer M3UA - MTP3-User Adaptation MAP - Mated Application Table MSU - Message Signal Unit MTP - Message Transport Protocol MTP2 - Layer 2 of Message Transport Protocol MTP3 - Layer 3 of Message Transport Protocol NAI - Nature of Address Indicator NP - Numbering Plan NTT - The Japanese Nippon Telephone & Telegraph OPC - Originating Point Code PC - Point Code RTN - Route Table Name RSR - Reset Request message SCCP - Signalling Connection Control Part SCTP - Stream Transmission Protocol(RFC 2960) SI - Signalling Indicator SP - Signalling Point SLC - Signalling Link Code SLS - Signalling Link Selector SSN - Subsystem Number SUA - SCCP-User Adaptation TFR - Transfer Restricted messages TT - Title Translation TTC - The Japanese Telecommunications Technology Committee UDT - unitdata message UDTS - unitdata service message XUDT - extended unitdata message XUDTS - extended unitdata service message
Imported Objects
| CISCO-SMI | ciscoMgmt |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.231 | IdentityciscoItpTextualConventions | The defines textual conventions used by to manage devices related to the SS7 network. The relevant ITU documents describing this technology is the ITU Q series… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CItpTcAclId | Unsigned32 (0 | 2700..2999) | current | An numeric Identifier used to specify an access list used to permit and deny packets based on MTP3 information. Either the value 0 or the value of access list identifier. A value of zero indicates that an access list is… |
| CItpTcCLLI | OCTET STRING ( SIZE ( 0..11 ) ) | current | Common Language Location Codes (CLLI Codes). An 11-character standardized geographic identifier that uniquely identifies the geographic location of telecommunication equipment. The CLLI code is supported as octet string… |
| CItpTcDisplayPC | OCTET STRING ( SIZE ( 1..12 ) ) | current | The Point Code in formatted based on the variant and the customer defined parameters. |
| CItpTcEncodingSchemeValue | Integer32 (0..15) | current | The encoding scheme value. |
| CItpTcGlobalTitleSelector | INTEGER { nai(1), tt(2), ttNpEs(3), ttNpNaiEs(4) } | current | Global Title Selector. 'nai' : Global title translation based on nature of address indicator. 'tt' : Global title translation based on translation type. 'ttNpEs' : Global title translation based on translation type, num… |
| CItpTcGlobalTitleSelectorName | OCTET STRING ( SIZE ( 1..9 ) ) | current | The configured name associated with SCCP GTT Selector. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Comman… |
| CItpTcGtaAddr | OCTET STRING ( SIZE ( 8 ) ) | deprecated | The configured digits in the SCCP GTT Global Title Address. An octet string specified by an administrator must be in human-readable form. The names must conform to the allowed characters that can be specified via Comman… |
| CItpTcGtaDisplay | OCTET STRING ( SIZE ( 1..15 ) ) | deprecated | The configured digits in the SCCP GTT Global Title Address. It consists of ASCII representation of GTA hex digits. This textual convention has been deprecated and replaced by CItpTcGtaDisplayZB. |
| CItpTcGtaDisplayLen | Unsigned32 ( 1..15 ) | current | The SCCP GTT Global Title Address length. |
| CItpTcGtaDisplayZB | OCTET STRING ( SIZE ( 0..15 ) ) | deprecated | The configured digits in the SCCP GTT Global Title Address. It consists of ASCII representation of GTA hex digits. |
| CItpTcGtaLongAddr | OCTET STRING ( SIZE ( 0..64 ) ) | current | The configured hexadecimal digits in the SCCP GTT Global Title Address. |
| CItpTcGtaLongDisplay | OCTET STRING ( SIZE ( 0..64 ) ) | current | The configured digits in the SCCP GTT Global Title Address. It consists of ASCII representation of GTA hex digits. |
| CItpTcGtaLongDisplayLen | Unsigned32 ( 0..64 ) | current | The SCCP GTT Global Title Address length. |
| CItpTcInstanceNumber | Unsigned32 ( 0..255 ) | current | The instance number used to select a particular Signalling point. |
| CItpTcLinksetId | OCTET STRING ( SIZE ( 1..19 ) ) | current | The configured name associated with an Signalling Point Linkset. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified … |
| CItpTcLinkSLC | Unsigned32 ( 0..15 ) | current | The Signalling Link Code. This is the link identifier within a linkset. |
| CItpTcLinkType | INTEGER { other(1), serial(2), sctpIp(3), hsl(4), virtual(5) } | current | The link types. 'other' : This link is of some type not listed below. 'serial' : This link is a serial link transporting SS7 traffic. 'sctpIp' : This a SCTP/IP link transporting SS7 traffic. 'hsl' : This link is a high … |
| CItpTcNAI | Integer32 (0..255) | current | The SCCP GTT Network Address Indicator (NAI). The following values are generally used: Unknown Nature of Address (0), Subscriber Number (1), Reserved for national use (2), National Significant Number (3), International … |
| CItpTcNetworkIndicator | INTEGER { international(0), internationatSpare(1), national(2), nationalSpare(3) } | current | Network Indicator: international - International network national - National network reserved - Reserved for national use spare - Spare (for international use only) 'international' : International network 'international… |
| CItpTcNetworkName | OCTET STRING ( SIZE ( 0..19 ) ) | current | The network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correla… |
| CItpTcNumberingPlan | Integer32 (0..255) | current | The SCCP GTT Numbering Plan (NP). The following values are generally used: Unknown NP (0), ISDN/Telephony NP (1), Spare (2), Data NP (3), Telex NP (4), Maritime Mobile NP (5), Land Mobile NP (6), ISDN/Mobile NP (7), Pri… |
| CItpTcPointCode | Unsigned32 ( 0..16777216) | current | The SS7 network node address as specified in the following references. The format of the Point code depends on the variant defined in the CgspSS7Variant object as follows. 33222222222211111111110000000000 10987654321098… |
| CItpTcPointCodeMask | Unsigned32 ( 0..16777216) | current | A mask used to perform different operations on pointcodes. |
| CItpTcPointCodeType | INTEGER { primary(1), additional(2), capability(3), xua(4) } | current | List of the possible Point Code types. 'primary' : The primary point used to communicate information on the Signalling point. 'additional' : Additional point codes. 'capability' : capability point codes. 'xua' : MTP3-Us… |
| CItpTcQos | Unsigned32 (0..7 | 255) | current | The quality of service classification to be assigned to the IP packets used to transport the SS7 messages. The value can be from one to seven when selecting a Qos class or 255 to indicate the packet will not be assigned… |
| CItpTcRouteTableName | OCTET STRING ( SIZE (1..19) ) | current | The configured name associated with an SP Route Table. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Comman… |
| CItpTcServiceIndicator | INTEGER { snmm(0), sntm(1), spare2(2), sccp(3), tup(4), isup(5), dupc(6), dupf(7), mtup(8), bisup(9), sisup(10), spare11(11), spare12(12), spare13(13), spare14(14), spare15(15) } | current | The list of possible Service Indicator values. This identifies the type of SS7 packet. The service indicator codes for the international Signalling network are allocated as follows: 'SNMM' : Signalling network managemen… |
| CItpTcSls | Unsigned32 (0..255) | current | The Signalling Link Selector is a numeric value that contains the MTP3 packets to allow load balancing of traffic across a link within a linkset or combined linkset. Each linkset provides one or more tables used to map … |
| CItpTcSs7Variant | INTEGER { ansi(1), itu(2), china(3) } | current | The list of SS7 variants. 'ANSI' : The ANSI variant of the SS7 specification. 'ITU' : The ITU variant of the SS7 specification. 'China' : The China national variant. This variant is a combination of ITU and ANSI. The pr… |
| CItpTcSubSystemNumber | Unsigned32 (0 | 2..255 ) | current | The SCCP Subsystem Number . A value of zero indicates that a subsystem is not specified. |
| CItpTcSubSystemNumberMask | Unsigned32 ( 2..255 ) | current | The SCCP Subsystem Number Mask. |
| CItpTcTableLoadStatus | INTEGER { loadNotRequested(1), loadInProgress(2), loadComplete(3), loadCompleteWithErrors(4), loadFailed(5) } | current | The status of the current or prior load operation. 'loadNotRequested' : load operations have not been requested. 'loadInProgress' : load request is active. 'loadComplete' : load request complete without errors. 'loadCom… |
| CItpTcTimerLinkActRetry | Unsigned32 (0 | 60000..90000) | current | Link activation retry timer. Min Max Def ANSI 60000 90000 60000 This timer is not used when the variant is ITU. A value of zero indicates a value is not defined for a particular variant or is not supported by the implem… |
| CItpTcTimerLinkMessage | Unsigned32 (0 | 30000..90000) | current | Interval timer for sending test messages. Min Max Def ANSI 30000 90000 60000 This timer is not used when the variant is ITU. A value of zero indicates a value is not defined for a particular variant or is not supported … |
| CItpTcTimerLinkTest | Unsigned32 (0 | 4000..12000) | current | Signalling Link test acknowledgement timer. Min Max Def ANSI 4000 12000 8000 This timer is not used when the variant is ITU. A value of zero indicates a value is not defined for a particular variant or is not supported … |
| CItpTcTimerMtp2T01 | Unsigned32 (5000..150000) | current | Alignment ready timer. The default and valid range is dependant on the value of variant. Min Max Def ANSI 12500 16000 13000 ITU 40000 50000 40000 The SYNTAX statement allows values for both the ANSI, ITU variants and MT… |
| CItpTcTimerMtp2T02 | Unsigned32 (0 | 5000..150000) | current | Not aligned timer. The default and valid range is dependant on the value of variant. This timer is only applicable if cItpTcLinkType is serial. A get on this object will return a zero if the link is not serial. Min Max … |
| CItpTcTimerMtp2T03 | Unsigned32 (0 | 1000..14000) | current | Aligned timer. The default and valid range is dependant on the value of variant. This timer is only applicable if cItpTcLinkType is serial. A get on this object will return a zero if the link is not serial. Min Max Def … |
| CItpTcTimerMtp2T04E | Unsigned32 (0 | 400..660) | current | Proving period timer emergency timer. The default and valid range is dependant on the value of variant. This timer is only applicable if cItpTcLinkType is serial. A get on this object will return a zero if the link is n… |
| CItpTcTimerMtp2T04N | Unsigned32 (0 | 2007..9500) | current | Proving period timer normal timer. The default and valid range is dependant on the value of variant. This timer is only applicable if cItpTcLinkType is serial. A get on this object will return a zero if the link is not … |
| CItpTcTimerMtp2T05 | Unsigned32 (0 | 80..120) | current | Sending SIB timer. The default and valid range is dependant on the value of variant. This timer is only applicable if cItpTcLinkType is serial. A get on this object will return a zero if the link is not serial. Min Max … |
| CItpTcTimerMtp2T06 | Unsigned32 ( 1000..6000 ) | current | Remote congestion timer. The default and valid range is dependant on the value of variant. Min Max Def ANSI 1000 6000 1000 ITU 3000 6000 3000 The SYNTAX statement allows values for both the ANSI, ITU variants and MTP2 P… |
| CItpTcTimerMtp2T07 | Unsigned32 (0 | 100..6000) | current | Excessive delay of acknowledgement timer. The default and valid range is dependant on the value of variant(). This timer is only applicable if cItpTcLinkType is serial. A get on this object will return a zero if the lin… |
| CItpTcTimerMtp3T01 | Unsigned32 (500..1200) | current | Delay to avoid message mis-sequencing on changeover. Ranges by variant. Min Max Def ANSI 500 1200 800 ITU 500 1200 800 The SYNTAX statement allows values for both the ANSI and ITU variants. |
| CItpTcTimerMtp3T02 | Unsigned32 (700..2000) | current | Waiting for changeover acknowledgement. Ranges by variant. Min Max Def ANSI 700 2000 1400 ITU 700 2000 1400 The SYNTAX statement allows values for both the ANSI and ITU variants. |
| CItpTcTimerMtp3T03 | Unsigned32 (500..1200) | current | Time controlled diversion-delay to avoid mis-sequencing on change back. Ranges by variant. Min Max Def ANSI 500 1200 800 ITU 500 1200 800 The SYNTAX statement allows values for both the ANSI and ITU variants. |
| CItpTcTimerMtp3T04 | Unsigned32 (500..1200) | current | Waiting for change back acknowledgement (first attempt). Ranges by variant. Min Max Def ANSI 500 1200 800 ITU 500 1200 800 The SYNTAX statement allows values for both the ANSI and ITU variants. |
| CItpTcTimerMtp3T05 | Unsigned32 (500..1200) | current | Waiting for change back acknowledgement (second attempt). Ranges by variant. Min Max Def ANSI 500 1200 800 ITU 500 1200 800 The SYNTAX statement allows values for both the ANSI and ITU variants. |
| CItpTcTimerMtp3T06 | Unsigned32 (500..1200) | current | Delay to avoid message mis-sequencing on controlled rerouting. Ranges by variant. Min Max Def ANSI 500 1200 800 ITU 500 1200 800 The SYNTAX statement allows values for both the ANSI and ITU variants. |
| CItpTcTimerMtp3T07 | Unsigned32 (0 | 1000..2000) | current | Waiting for Signalling data link connection acknowledgement. Ranges by variant. Min Max Def ANSI 1000 2000 1500 ITU 1000 2000 1500 The SYNTAX statement allows values for both the ANSI and ITU variants. A value of zero i… |
| CItpTcTimerMtp3T08 | Unsigned32 (800..1200) | current | Transfer prohibited inhibition timer (transient solution). Ranges by variant. Min Max Def ANSI 800 1200 1000 ITU 800 1200 1000 The SYNTAX statement allows values for both the ANSI and ITU variants. |
| CItpTcTimerMtp3T10 | Unsigned32 (30000..60000) | current | Waiting to repeat Signalling routeset test message. Ranges by variant. Min Max Def ANSI 30000 60000 45000 ITU 30000 60000 45000 The SYNTAX statement allows values for both the ANSI and ITU variants. |
| CItpTcTimerMtp3T11 | Unsigned32 (30000..90000) | current | Transfer restricted timer. (This is one way of implementing the function described in 13.4/Q.704 and mainly intended to simplify SPs.). Ranges by variant. Min Max Def ANSI 30000 90000 60000 ITU 30000 90000 60000 The SYN… |
| CItpTcTimerMtp3T12 | Unsigned32 (800..1500) | current | Waiting for uninhibit acknowledgement. Ranges by variant. Min Max Def ANSI 800 1500 1150 ITU 800 1500 1150 The SYNTAX statement allows values for both the ANSI and ITU variants. |
| CItpTcTimerMtp3T13 | Unsigned32 (800..1500) | current | Waiting for force uninhibit. Ranges by variant. Min Max Def ANSI 800 1500 1150 ITU 800 1500 1150 The SYNTAX statement allows values for both the ANSI and ITU variants. |
| CItpTcTimerMtp3T14 | Unsigned32 (2000..3000) | current | Waiting for inhibition acknowledgement. Ranges by variant. Min Max Def ANSI 2000 3000 2500 ITU 2000 3000 2500 The SYNTAX statement allows values for both the ANSI and ITU variants. |
| CItpTcTimerMtp3T15 | Unsigned32 (2000..3000) | current | Waiting to start Signalling routeset congestion test. Ranges by variant. Min Max Def ANSI 2000 3000 2500 ITU 2000 3000 2500 The SYNTAX statement allows values for both the ANSI and ITU variants. |
| CItpTcTimerMtp3T16 | Unsigned32 (1400..2000) | current | Waiting for routeset congestion status update. Ranges by variant. Min Max Def ANSI 1400 2000 1700 ITU 1400 2000 1700 The SYNTAX statement allows values for both the ANSI and ITU variants. |
| CItpTcTimerMtp3T17 | Unsigned32 (800..1500) | current | Delay to avoid oscillation of initial alignment failure and link restart. Ranges by variant. Min Max Def ANSI 800 1500 1150 ITU 800 1500 1150 The SYNTAX statement allows values for both the ANSI and ITU variants. |
| CItpTcTimerMtp3T18 | Unsigned32 (1000..31000) | current | This timers servers different function based on the variant. ANSI: Repeat TFR once by response method ITU: MTP restart link supervision Min Max Def ANSI 2000 20000 11000 ITU 1000 31000 30000 The SYNTAX statement allows … |
| CItpTcTimerMtp3T19 | Unsigned32 (67000..600000) | current | This timers servers different function based on the variant. ANSI: failed craft timer referral timer ITU: supervision timer during MTP restart Min Max Def ANSI 480000 600000 540000 ITU 67000 69000 68000 The SYNTAX state… |
| CItpTcTimerMtp3T20 | Unsigned32 (1000..120000) | current | This timers servers different function based on the variant. ANSI: waiting to repeat local inhibit test ITU: MTP restart timer at the Signalling point Min Max Def ANSI 90000 120000 105000 ITU 1000 61000 60000 The SYNTAX… |
| CItpTcTimerMtp3T21 | Unsigned32 (63000..120000) | current | This timers servers different function based on the variant. ANSI: waiting to repeat remote inhibit test) ITU: MTP restart timer at adjacent Signalling point Min Max Def ANSI 90000 120000 105000 ITU 63000 65000 64000 Th… |
| CItpTcTimerMtp3T22 | Unsigned32 (36000..360000) | current | This timers servers different function based on the variant. ANSI: restarting SP waiting for Signalling links avail ITU: local inhibit test timer Min Max Def ANSI 36000 60000 30000 ITU 80000 360000 300000 The SYNTAX sta… |
| CItpTcTimerMtp3T23 | Unsigned32 (9000..360000) | current | This timers servers different function based on the variant. ANSI: restarting SP waiting to receive all TRA msgs ITU: remote inhibit test timer Min Max Def ANSI 9000 60000 30000 ITU 80000 360000 300000 The SYNTAX statem… |
| CItpTcTimerMtp3T24 | Unsigned32 (500..60000) | current | This timers servers different function based on the variant. ANSI: restarting SP waiting to broadcast all TRA msgs ITU: stabilizing timer after local processor outage Min Max Def ANSI 9000 60000 30000 ITU 500 500 500 Th… |
| CItpTcTimerMtp3T25 | Unsigned32 (0 | 30000..35000) | current | Timer at Signalling Point (SP) adjacent to restarting SP, waiting for traffic restart allowed message. Ranges by variant. Min Max Def ANSI 30000 35000 30000 This timer is not used when the variant is ITU. A value of zer… |
| CItpTcTimerMtp3T26 | Unsigned32 (0 | 12000..15000) | current | Timer at restarting SP waiting to repeat traffic restart waiting message. Ranges by variant. Min Max Def ANSI 12000 15000 12000 This timer is not used when the variant is ITU. A value of zero indicates a value is not de… |
| CItpTcTimerMtp3T27 | Unsigned32 (0 | 2000..50000) | current | Minimum duration of unavailability for full restart. Ranges by variant. Min Max Def ANSI 2000 50000 4000 This timer is not used when the variant is ITU. A value of zero indicates a value is not defined for a particular … |
| CItpTcTimerMtp3T28 | Unsigned32 (0 | 3000..35000) | current | Timer at SP adjacent to restarting SP waiting for traffic restart waiting message. Ranges by variant. Min Max Def ANSI 3000 35000 30000 This timer is not used when the variant is ITU. A value of zero indicates a value i… |
| CItpTcTimerMtp3T29 | Unsigned32 (0 | 60000..65000) | current | Timer started when TRA sent in response to unexpected TRA or TRW. Ranges by variant. Min Max Def ANSI 60000 65000 63000 This timer is not used when the variant is ITU. A value of zero indicates a value is not defined fo… |
| CItpTcTimerMtp3T30 | Unsigned32 (0 | 30000..35000) | current | Timer to limit sending of TFPs and TFRs in response to unexpected TRA or TRW. Ranges by variant. Min Max Def ANSI 30000 35000 33000 This timer is not used when the variant is ITU. A value of zero indicates a value is no… |
| CItpTcTimerMtp3T31 | Unsigned32 (0 | 10000..120000) | current | False link congestion detection timer. Ranges by variant. Min Max Def ANSI 10000 120000 60000 This timer is not used when the variant is ITU. A value of zero indicates a value is not defined for a particular variant or … |
| CItpTcTimerMtp3T32 | Unsigned32 (0 | 5000..120000) | current | Link oscillation timer - Procedure A. Ranges by variant. Min Max Def ANSI 5000 120000 60000 This timer is not used when the variant is ITU. A value of zero indicates a value is not defined for a particular variant or is… |
| CItpTcTimerMtp3T33 | Unsigned32 (0 | 60000..600000) | current | Probation timer for link oscillation - Procedure B. Ranges by variant. Min Max Def ANSI 60000 600000 300000 This timer is not used when the variant is ITU. A value of zero indicates a value is not defined for a particul… |
| CItpTcTimerMtp3T34 | Unsigned32 (0 | 5000..120000) | current | Suspension timer for link oscillation - Procedure B. Ranges by variant. Min Max Def ANSI 5000 120000 60000 This timer is not used when the variant is ITU. A value of zero indicates a value is not defined for a particula… |
| CItpTcTranslationType | INTEGER { tt(1), ssn(2) } | current | The Translation Type for SCCP GTT GTA specifies Title Translation or Subsystem Number (SSN) 'tt' : The GTT GTA has specified Title Translation 'ssn' : The GTT GTA has specified Subsystem Number. |
| CItpTcURL | OCTET STRING ( SIZE (0..255) ) | current | The URL used to load a configuration file. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Inter… |
| CItpTcXuaName | OCTET STRING ( SIZE ( 0..12 ) ) | current | The configured name associated with M3UA/SUA ASP or AS name. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via … |