CISCO-IVR-MIB
155 objects
The MIB module for the management of Inter-VSAN routing within the framework of Cisco's Inter-VSAN Routing (IVR) Architecture. IVR allows traffic between VSANs. VSANs are logically separated Storage Area Networks (SANs) where traffic does not cross VSAN boundaries. Certain SAN applications need restricted communication between initiators and targets which are in different VSANs. This MIB enables the users to manage IVR. The VSANs logically separate a single physical fabric into multiple logical fabrics. Each of these physical fabrics are called Autonmous Fabrics. In addition to Inter-VSAN communication, IVR also enables communication between Autonomous Fabrics. Acronyms The following acronyms are used in this document: Lun: Logical Unit Number IV: Inter-VSAN IVR: Inter-VSAN Routing PWWN: Port World Wide Name AFID: Autonomous Fabric id
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-ST-TC | DomainId FcAddressId FcNameId VsanIndex |
| CISCO-VSAN-MIB | vsanIndex |
| CISCO-ZS-MIB | FcList ZoneQosPriorityLevel |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.371 | IdentityciscoIvrMIB | The MIB module for the management of Inter-VSAN routing within the framework of Cisco's Inter-VSAN Routing (IVR) Architecture. IVR allows traffic between VSANs… | ||
| 1.3.6.1.4.1.9.9.371.0 | NodeciscoIvrMIBNotifications | |||
| 1.3.6.1.4.1.9.9.371.0.1 | NotificationcivrZoneActivationDoneNotify | current | This notification is generated on completion of an IV zoneset activation. civrZoneSetActDeactPartialSucss is valid only if the activation was successful. | |
| 1.3.6.1.4.1.9.9.371.0.2 | NotificationcivrZoneDeactivationDoneNotify | current | This notification is generated on completion of an IV zoneset deactivation. civrZoneSetActDeactPartialSucss is valid only if the deactivation was successful. | |
| 1.3.6.1.4.1.9.9.371.0.3 | NotificationcivrDomainConflictNotify | current | This notification is sent when domainID conflict occurs in a VSAN. The domainIDs in all the VSANs (dmDatabaseTable in CISCO-DM-MIB) which are configured to be … | |
| 1.3.6.1.4.1.9.9.371.0.4 | NotificationcivrAfidConfigNotify | current | This notification is sent when an IVR AFID mis-configuration occurs. | |
| 1.3.6.1.4.1.9.9.371.1 | NodeciscoIvrMIBObjects | |||
| 1.3.6.1.4.1.9.9.371.1.1 | NodecimIvrConfiguration | |||
| 1.3.6.1.4.1.9.9.371.1.1.1 | NodecimIvrGeneric | |||
| 1.3.6.1.4.1.9.9.371.1.1.1.1 | ScalarcivrFcidNatMode | read-write | current | Enable FCID and VSAN identifier translation cross VSAN boundaries. If the value is 'true', the VSAN identifier as well as the entire FCID of the end-devices wo… |
| 1.3.6.1.4.1.9.9.371.1.1.1.2 | ScalarcivrVsanTopologyAutoDisc | read-write | current | Enable automatic VSAN topology discovery. If this value is 'true', automatic VSAN topology discovery is turned on. IVR processes would communicate with each ot… |
| 1.3.6.1.4.1.9.9.371.1.1.2 | NodecimIvrZoneset | |||
| 1.3.6.1.4.1.9.9.371.1.1.2.1 | ScalarcivrZoneSetNumber | read-only | current | The number of entries currently present in the civrZoneSetTable. |
| 1.3.6.1.4.1.9.9.371.1.1.2.2 | TablecivrZoneSetTable | not-accessible | current | A table containing information on each Inter-VSAN (IV) zonesets which are configured locally. It comprises the zonesets in the full IV zone database. There cou… |
| 1.3.6.1.4.1.9.9.371.1.1.2.2.1 | RowcivrZoneSetEntry | not-accessible | current | An entry (conceptual row) in the civrZoneSetTable. The sequence of operations to be performed in order to create a zoneset is as follows: - create zone entries… |
| 1.3.6.1.4.1.9.9.371.1.1.2.2.1.1 | ColumncivrZoneSetIndex | not-accessible | current | The index of a zoneset. This object uniquely identifies an IV zoneset. This object could have the same value as civrZoneSetTableNextIndex. |
| 1.3.6.1.4.1.9.9.371.1.1.2.2.1.2 | ColumncivrZoneSetName | read-create | current | The name of this zoneset. The civrZoneSetName should be unique on this device. This object cannot be modified while the corresponding value of civrZoneSetRowSt… |
| 1.3.6.1.4.1.9.9.371.1.1.2.2.1.3 | ColumncivrZoneSetZoneList | read-create | current | The set of IV zones which form this zoneset. The IV zones are identified by civrZoneIndex object in the civrZoneTable. If a particular bit has a value of '1', … |
| 1.3.6.1.4.1.9.9.371.1.1.2.2.1.4 | ColumncivrZoneSetLastChange | read-only | current | The value of sysUpTime at the time of the last change to this IV zoneset entry. If the entry has not been modified since the last re-initialization of the loca… |
| 1.3.6.1.4.1.9.9.371.1.1.2.2.1.5 | ColumncivrZoneSetChecksum | read-only | current | The checksum of content of this zoneset. |
| 1.3.6.1.4.1.9.9.371.1.1.2.2.1.6 | ColumncivrZoneSetRowStatus | read-create | current | The status of this conceptual row. This object can not be set to 'active' unless the corresponding value of civrZoneSetName is unique. |
| 1.3.6.1.4.1.9.9.371.1.1.2.3 | ScalarcivrZoneSetActivate | read-write | current | Setting this object to a value is a request for a particular IV zoneset to be activated on this device. i.e., for the current configuration of that zoneset to … |
| 1.3.6.1.4.1.9.9.371.1.1.2.4 | ScalarcivrZoneSetActvatDeactvatResult | read-only | current | This object indicates the outcome of the most recent activation/deactivation. activateSuccess - activation success activateFailureNoMembers - activation failur… |
| 1.3.6.1.4.1.9.9.371.1.1.2.5 | ScalarcivrZoneSetDeActivate | read-write | current | Setting this object to 'deactivate' is a request to deactivate the currently active IV zoneset. deactivate - deactivate IV zoneset noop - no operation No actio… |
| 1.3.6.1.4.1.9.9.371.1.1.2.6 | ScalarcivrZonesetDbChecksum | read-only | current | The checksum of the full IV zone database. |
| 1.3.6.1.4.1.9.9.371.1.1.2.7 | ScalarcivrActiveZonesetChecksum | read-only | current | The checksum of the enforced (active) IV zoneset. |
| 1.3.6.1.4.1.9.9.371.1.1.2.8 | ScalarcivrZoneEnforcedZoneSetName | read-only | current | The name of the enforced IV zoneset. |
| 1.3.6.1.4.1.9.9.371.1.1.2.9 | ScalarcivrZoneEnforcedZoneSetZoneList | read-only | current | The set of IV zones which form this IV zoneset. This object was copied from the civrZoneSetZoneList object in the civrZoneSetTable at the time when the current… |
| 1.3.6.1.4.1.9.9.371.1.1.2.10 | ScalarcivrZoneEnforcedZoneSetActvtTime | read-only | current | The sysUpTime at which enforced zoneset was most recently activated. If this entry has been activated prior to the last re-initialization of the local network … |
| 1.3.6.1.4.1.9.9.371.1.1.2.11 | ScalarcivrZoneCopyZoneSetEnforcdToFull | read-write | current | This object copies the enforced IV zoneset (active IV zoneset) into the full IV zone database Setting this object to 'copy' will trigger the copy of the enforc… |
| 1.3.6.1.4.1.9.9.371.1.1.2.12 | ScalarcivrZoneClearFullZoneDb | read-write | current | This object clears the full IVR zone database. Setting this object to 'clear' will clear the full IV zone database. No action is taken if this object is set to… |
| 1.3.6.1.4.1.9.9.371.1.1.2.13 | ScalarcivrZonesetActivateForce | read-write | current | The force option for IV zoneset activation. Following things are done if this object is 'true': - If there is no regular active zoneset in a VSAN (no entry pre… |
| 1.3.6.1.4.1.9.9.371.1.1.2.14 | ScalarcivrZoneSetTableNextIndex | read-only | current | This object specifies the next available index for object civrZoneSetIndex which can be used for creating an entry in civrZoneSetTable. |
| 1.3.6.1.4.1.9.9.371.1.1.3 | NodecimIvrZone | |||
| 1.3.6.1.4.1.9.9.371.1.1.3.1 | ScalarcivrZoneNumber | read-only | current | The number of entries currently present in the civrZoneTable. |
| 1.3.6.1.4.1.9.9.371.1.1.3.2 | TablecivrZoneTable | not-accessible | current | This table gives information on all the IV zones and lists all their members. IV zones is group of IV members (FC devices like hosts, disks) in different VSANs. |
| 1.3.6.1.4.1.9.9.371.1.1.3.2.1 | RowcivrZoneEntry | not-accessible | current | An entry (conceptual row) in the civrZoneTable. These are the zones in the full IV zone database. The sequence of operations to be performed in order to create… |
| 1.3.6.1.4.1.9.9.371.1.1.3.2.1.1 | ColumncivrZoneIndex | not-accessible | current | The index of an IV Zone. This object could have the same value as civrZoneTableNextIndex. |
| 1.3.6.1.4.1.9.9.371.1.1.3.2.1.2 | ColumncivrZoneName | read-create | current | The name of this zone. The zoneName should be unique this device. This object can not be modified while the corresponding value of civrZoneRowStatus is 'active… |
| 1.3.6.1.4.1.9.9.371.1.1.3.2.1.3 | ColumncivrZoneMemberList | read-only | current | The set of IV Zone members that form this IV zone. The IV zone members are identified by civrZoneMemberIndex object in the civrZoneMemberTable. If a particular… |
| 1.3.6.1.4.1.9.9.371.1.1.3.2.1.5 | ColumncivrZoneLastChange | read-only | current | The value of sysUpTime at the time of the last change to this IV zone entry. If the entry has not been modified since the last re-initialization of the local n… |
| 1.3.6.1.4.1.9.9.371.1.1.3.2.1.6 | ColumncivrZoneRowStatus | read-create | current | The status of this conceptual row. This object can not be set to 'active' unless the corresponding value of zoneName is unique on this device. |
| 1.3.6.1.4.1.9.9.371.1.1.3.2.1.7 | ColumncivrZoneReadOnly | read-create | current | This object indicates if only SCSI read operations are allowed on members of this IV zone which are SCSI targets. If this object is set to 'true', then only SC… |
| 1.3.6.1.4.1.9.9.371.1.1.3.2.1.8 | ColumncivrZoneQosPriority | read-create | current | This object specifies if qos attribute for this IV zone is enabled. If this object is set to a value other than 'none', then qos attribute for this IV zone is … |
| 1.3.6.1.4.1.9.9.371.1.1.3.3 | ScalarcivrZoneEnforcedZoneNumber | read-only | current | The number of entries currently present in the civrZoneEnforcedZoneTable. |
| 1.3.6.1.4.1.9.9.371.1.1.3.4 | TablecivrZoneEnforcedZoneTable | not-accessible | current | This table contains all the IV zones that are present in the active IV zoneset. |
| 1.3.6.1.4.1.9.9.371.1.1.3.4.1 | RowcivrZoneEnforcedZoneEntry | not-accessible | current | An entry (conceptual row) in this table. |
| 1.3.6.1.4.1.9.9.371.1.1.3.4.1.1 | ColumncivrZoneEnforcedZoneName | read-only | current | The name of this zone. |
| 1.3.6.1.4.1.9.9.371.1.1.3.4.1.2 | ColumncivrZoneEnforcedZoneMemberList | read-only | current | The set of members that form this IV zone. This object was copied from the civrZoneMemberList object in the civrZoneTable at the time when the currently active… |
| 1.3.6.1.4.1.9.9.371.1.1.3.4.1.3 | ColumncivrZoneEnforcedZoneReadOnly | read-only | current | This object indicates whether this is a read-only IV zone. This object was copied from the civrZoneReadOnly object in the civrZoneTable at the time when the cu… |
| 1.3.6.1.4.1.9.9.371.1.1.3.4.1.4 | ColumncivrZoneEnforcedZoneQosPriority | read-only | current | This object indicates whether this is a qos enabled IV zone. This object was copied from the civrZoneQosPriority object in the civrZoneTable at the time when t… |
| 1.3.6.1.4.1.9.9.371.1.1.3.5 | ScalarcivrZoneTableNextIndex | read-only | current | This object specifies the next available index for object civrZoneIndex which can be used for creating an entry in civrZoneTable. |
| 1.3.6.1.4.1.9.9.371.1.1.4 | NodecimIvrZoneMember | |||
| 1.3.6.1.4.1.9.9.371.1.1.4.1 | ScalarcivrZoneMemberNumber | read-only | current | The number of entries currently present in the civrZoneMemberTable. |
| 1.3.6.1.4.1.9.9.371.1.1.4.2 | TablecivrZoneMemberTable | not-accessible | current | This table contains all members of all the IV Zones in the civrZoneTable and information about those members. These are the members part of full IV zone databa… |
| 1.3.6.1.4.1.9.9.371.1.1.4.2.1 | RowcivrZoneMemberEntry | not-accessible | current | An entry (conceptual row) in the civrZoneMemberTable. Each entry represents the relationship between a member and (one of) its 'parent(s)', i.e., an IV zone to… |
| 1.3.6.1.4.1.9.9.371.1.1.4.2.1.1 | ColumncivrZoneMemberParentIndex | not-accessible | current | This object contains the value of the index of the IV zone to which this member belongs to. |
| 1.3.6.1.4.1.9.9.371.1.1.4.2.1.2 | ColumncivrZoneMemberIndex | not-accessible | current | The index of this IV zone member on this IV zone. |
| 1.3.6.1.4.1.9.9.371.1.1.4.2.1.3 | ColumncivrZoneMemberType | read-create | current | The type of IV Zone member. This object cannot be modified while the corresponding value of civrZoneMemberRowStatus object is 'active'. |
| 1.3.6.1.4.1.9.9.371.1.1.4.2.1.4 | ColumncivrZoneMemberID | read-create | current | This object represents the IV zone member ID. If civrZoneMemberType is 'pwwnVsan', this object contains port WWN. This object cannot be modified while the corr… |
| 1.3.6.1.4.1.9.9.371.1.1.4.2.1.5 | ColumncivrZoneMemberAFId | read-create | current | The Autonomous Fabric identifier of this IV zone member. This object cannot be modified while the corresponding value of civrZoneMemberRowStatus object is 'act… |
| 1.3.6.1.4.1.9.9.371.1.1.4.2.1.6 | ColumncivrZoneMemberVsan | read-create | current | The VSAN of this IV zone member. This object cannot be modified while the corresponding value of civrZoneMemberRowStatus object is 'active'. |
| 1.3.6.1.4.1.9.9.371.1.1.4.2.1.7 | ColumncivrZoneMemberRowStatus | read-create | current | The status of this conceptual row. civrMemberType, civrZoneMemberID and civrZoneMemberVsan objects MUST be set before or concurrently with setting the correspo… |
| 1.3.6.1.4.1.9.9.371.1.1.4.2.1.8 | ColumncivrZoneMemberLunID | read-create | current | This object specifies the Lun ID if IV Lun zoning is configured. If this object is the zero-length string, then IV Lun zoning is not configured. This object ca… |
| 1.3.6.1.4.1.9.9.371.1.1.4.3 | ScalarcivrZoneEnforcedZoneMemberNumber | read-only | current | The number of entries currently present in the civrZoneEnforcedZoneMemberTable. |
| 1.3.6.1.4.1.9.9.371.1.1.4.4 | TablecivrZoneEnforcedZoneMemberTable | not-accessible | current | This table contains all members that are part of a IV zone and are part of the active IV zone set. |
| 1.3.6.1.4.1.9.9.371.1.1.4.4.1 | RowcivrZoneEnforcedZoneMemberEntry | not-accessible | current | An entry (conceptual row) in this table. |
| 1.3.6.1.4.1.9.9.371.1.1.4.4.1.2 | ColumncivrZoneEnforcedZoneMemberType | read-only | current | The type of IV zone member. This object was copied from the civrZoneMemberType object in the civrZoneMemberTable at the time when the currently active zoneset … |
| 1.3.6.1.4.1.9.9.371.1.1.4.4.1.3 | ColumncivrZoneEnforcedZoneMemberID | read-only | current | This object represents this member's address. This object was copied from the civrZoneMemberID object in the civrZoneMemberTable at the time when the currently… |
| 1.3.6.1.4.1.9.9.371.1.1.4.4.1.4 | ColumncivrZoneEnforcedZoneMemberAFId | read-only | current | The Autonomous Fabric identifier of the member. This object was copied from the civrZoneMemberAFId object in the civrZoneMemberTable at the time when the curre… |
| 1.3.6.1.4.1.9.9.371.1.1.4.4.1.5 | ColumncivrZoneEnforcedZoneMemberVsan | read-only | current | The VSAN of the member. This object was copied from the civrZoneMemberVsan object in the civrZoneMemberTable at the time when the currently active zoneset was … |
| 1.3.6.1.4.1.9.9.371.1.1.4.4.1.6 | ColumncivrZoneEnforcedZoneMemberLunID | read-only | current | This object specifies the Lun ID if IV Lun zoning is configured. This object was copied from the civrZoneMemberLunID object in the civrZoneMemberTable at the t… |
| 1.3.6.1.4.1.9.9.371.1.1.5 | NodecimIvrTopology | |||
| 1.3.6.1.4.1.9.9.371.1.1.5.1 | ScalarcivrTopologyConfiguredChecksum | read-only | current | The checksum of the configured IVR topology. |
| 1.3.6.1.4.1.9.9.371.1.1.5.2 | TablecivrTopologyConfigTable | not-accessible | current | This table contains the configured IVR topology. The topology is specified in terms of one or more Autonomous Fabrics made of switches and the VSANs to/from wh… |
| 1.3.6.1.4.1.9.9.371.1.1.5.2.1 | RowcivrTopologyConfigEntry | not-accessible | current | An entry (conceptual row) in this table. |
| 1.3.6.1.4.1.9.9.371.1.1.5.2.1.1 | ColumncivrTopologyConfigSwitchWwn | not-accessible | current | The configured switch WWN of this device. |
| 1.3.6.1.4.1.9.9.371.1.1.5.2.1.2 | ColumncivrTopologyConfigAutoFabricId | not-accessible | current | The configured Autonomous Fabric id of this device. |
| 1.3.6.1.4.1.9.9.371.1.1.5.2.1.3 | ColumncivrTopologyConfigSwitchVsan2k | read-create | current | The list of configured VSANs that are part of IVR topology on this device. Each octet within the value of this object specifies a set of eight VSANs, with the … |
| 1.3.6.1.4.1.9.9.371.1.1.5.2.1.4 | ColumncivrTopologyConfigSwitchVsan4k | read-create | current | The list of configured VSANs that are part of IVR topology on this device. Each octet within the value of this object specifies a set of eight VSANs, with the … |
| 1.3.6.1.4.1.9.9.371.1.1.5.2.1.5 | ColumncivrTopologyConfigRowStatus | read-create | current | Status of this row. |
| 1.3.6.1.4.1.9.9.371.1.1.5.3 | ScalarcivrTopologyActivate | read-write | current | Setting this object to 'activate' is a request for the configured IVR topology to be activated on this device. i.e., for the current configuration of IVR topol… |
| 1.3.6.1.4.1.9.9.371.1.1.5.4 | ScalarcivrTopologyActivateTime | read-only | current | The sysUpTime at which the IVR topology was most recently activated. If the IVR topology has not been activated prior to the last re-initialization of the loca… |
| 1.3.6.1.4.1.9.9.371.1.1.5.5 | ScalarcivrTopologyCopyActiveToConfig | read-write | current | This object copies the active IVR topology table to configured IVR topology table. If there is no active IVR topology, the copy will result in an error. No act… |
| 1.3.6.1.4.1.9.9.371.1.1.5.6 | ScalarcivrTopologyClearConfigured | read-write | current | This object clears the configured IVR topology table. No action is taken if this object is set to 'noOp'. |
| 1.3.6.1.4.1.9.9.371.1.1.5.7 | ScalarcivrTopologyActiveChecksum | read-only | current | The checksum of the active IVR topology. |
| 1.3.6.1.4.1.9.9.371.1.1.5.8 | TablecivrTopologyActiveTable | not-accessible | current | This table contains the IVR topology. The topology is specified in terms of one or more Autonomous Fabrics made of switches and the VSANs to/from which the swi… |
| 1.3.6.1.4.1.9.9.371.1.1.5.8.1 | RowcivrTopologyActiveEntry | not-accessible | current | An entry (conceptual row) in this table. |
| 1.3.6.1.4.1.9.9.371.1.1.5.8.1.1 | ColumncivrTopologyActiveSwitchWwn | not-accessible | current | The switch WWN of this device. |
| 1.3.6.1.4.1.9.9.371.1.1.5.8.1.2 | ColumncivrTopologyActiveAutoFabricId | not-accessible | current | The Autonomous Fabric id of this device. |
| 1.3.6.1.4.1.9.9.371.1.1.5.8.1.3 | ColumncivrTopologyActiveSwitchVsan2k | read-only | current | The list of VSANs that are part of IVR topology on this device. Each octet within the value of this object specifies a set of eight VSANs, with the first octet… |
| 1.3.6.1.4.1.9.9.371.1.1.5.8.1.4 | ColumncivrTopologyActiveSwitchVsan4k | read-only | current | The list of VSANs that are part of IVR topology on this device. Each octet within the value of this object specifies a set of eight VSANs, with the first octet… |
| 1.3.6.1.4.1.9.9.371.1.1.5.9 | ScalarcivrTopologyActive | read-only | current | This object indicates of IVR topology is active or not. If 'true', the IVR topology is active. And if it is 'false', the IVR topology is not active. |
| 1.3.6.1.4.1.9.9.371.1.1.5.10 | ScalarcivrTopologyAfidConfigChecksum | read-only | current | The checksum of the Autonomous Fabric id (AFID) configurations. |
| 1.3.6.1.4.1.9.9.371.1.1.5.11 | TablecivrTopologyAfidConfTable | not-accessible | current | This table contains the Autonomous Fabric id (AFID) configurations when automatic VSAN topology discovery is activated. An entry (conceptual row) in this table… |
| 1.3.6.1.4.1.9.9.371.1.1.5.11.1 | RowcivrTopologyAfidConfEntry | not-accessible | current | An entry (conceptual row) in this table. |
| 1.3.6.1.4.1.9.9.371.1.1.5.11.1.1 | ColumncivrTopologyAfidConfSwitchWwn | not-accessible | current | The switch WWN of this device. |
| 1.3.6.1.4.1.9.9.371.1.1.5.11.1.2 | ColumncivrTopologyAfidConfId | not-accessible | current | The configured Autonomous Fabric id of this device. |
| 1.3.6.1.4.1.9.9.371.1.1.5.11.1.3 | ColumncivrTopologyAfidConfSwitchVsan2k | read-create | current | The list of VSANs that are part of AFID (Autonomous Fabric ID) specified by civrTopologyConfigAutoFabricId on switch specified by civrTopologyConfigSwitchWwn. … |
| 1.3.6.1.4.1.9.9.371.1.1.5.11.1.4 | ColumncivrTopologyAfidConfSwitchVsan4k | read-create | current | The list of VSANs that are part of AFID (Autonomous Fabric ID) specified by civrTopologyConfigAutoFabricId on switch specified by civrTopologyConfigSwitchWwn. … |
| 1.3.6.1.4.1.9.9.371.1.1.5.11.1.5 | ColumncivrTopologyAfidConfRowStatus | read-create | current | Status of this row. |
| 1.3.6.1.4.1.9.9.371.1.1.5.12 | ScalarcivrTopologyDefaultAfidChecksum | read-only | current | The checksum of the configured default AFIDs. |
| 1.3.6.1.4.1.9.9.371.1.1.5.13 | TablecivrTopologyDefaultAfidTable | not-accessible | current | This table contains the default Autonomous Fabric id (AFID) configurations when automatic VSAN topology discovery is activated. An entry (conceptual row) in th… |
| 1.3.6.1.4.1.9.9.371.1.1.5.13.1 | RowcivrTopologyDefaultAfidEntry | not-accessible | current | An entry (conceptual row) in this table. |
| 1.3.6.1.4.1.9.9.371.1.1.5.13.1.1 | ColumncivrTopologyDefaultAfidSwitchWwn | not-accessible | current | The switch WWN of this device. |
| 1.3.6.1.4.1.9.9.371.1.1.5.13.1.2 | ColumncivrTopologyDefaultAfidId | read-create | current | The configured Default Autonomous Fabric id of this switch. |
| 1.3.6.1.4.1.9.9.371.1.1.5.13.1.3 | ColumncivrTopologyDefaultAfidStatus | read-create | current | Status of this row. |
| 1.3.6.1.4.1.9.9.371.1.1.5.14 | TablecivrTopologyIvrSrvGrpTable | not-accessible | current | This table contains configurations of Inter-VSAN Routing (IVR) Service Group. An Inter VSAN Routing Service Group defines a logical boundary for Inter-VSAN Rou… |
| 1.3.6.1.4.1.9.9.371.1.1.5.14.1 | RowcivrTopologyIvrSrvGrpEntry | not-accessible | current | An entry (conceptual row) in this table. |
| 1.3.6.1.4.1.9.9.371.1.1.5.14.1.1 | ColumncivrTopologyIvrSrvGrpName | not-accessible | current | This object contains the name of the IVR Service Group corresponding to this conceptual row. |
| 1.3.6.1.4.1.9.9.371.1.1.5.14.1.2 | ColumncivrTopologyIvrSrvGrpVsan2k | read-create | current | The list of VSANs that are part of this IVR Service Group specified by civrTopologyIvrSrvGrpName. Each octet within the value of this object specifies a set of… |
| 1.3.6.1.4.1.9.9.371.1.1.5.14.1.3 | ColumncivrTopologyIvrSrvGrpVsan4k | read-create | current | The list of VSANs that are part of this IVR Service Group specified by civrTopologyIvrSrvGrpName. Each octet within the value of this object specifies a set of… |
| 1.3.6.1.4.1.9.9.371.1.1.5.14.1.4 | ColumncivrTopologyIvrSrvGrpRowStatus | read-create | current | Status of this row. |
| 1.3.6.1.4.1.9.9.371.1.1.5.15 | ScalarcivrTopologyClearAfidConfig | read-write | current | This object clears the AFID configuration table, civrTopologyAfidConfTable, if this object is set to 'clear'. No action is taken if this object is set to 'noOp… |
| 1.3.6.1.4.1.9.9.371.1.1.6 | NodecimIvrVirtualDomains | |||
| 1.3.6.1.4.1.9.9.371.1.1.6.1 | ScalarcivrAddIvrVirtualDomainsVsans2k | read-write | current | This object lists VSANs in which the virtual domains in a VSAN are added to the domain list (dmDatabaseTable in CISCO-DM-MIB) in that VSAN. Each octet within t… |
| 1.3.6.1.4.1.9.9.371.1.1.6.2 | ScalarcivrAddIvrVirtualDomainsVsans4k | read-write | current | This object lists VSANs in which the virtual domains in a VSAN are added to the domain list (dmDatabaseTable in CISCO-DM-MIB) in that VSAN. Each octet within t… |
| 1.3.6.1.4.1.9.9.371.1.2 | NodecimIvrStats | |||
| 1.3.6.1.4.1.9.9.371.1.2.1 | TablecivrZoneSetStatusTable | not-accessible | current | A table containing status of the current active IV Zoneset on each local VSANs. |
| 1.3.6.1.4.1.9.9.371.1.2.1.1 | RowcivrZoneSetStatusEntry | not-accessible | current | An entry (conceptual row) in the civrZoneSetStatusTable. |
| 1.3.6.1.4.1.9.9.371.1.2.1.1.1 | ColumncivrZoneSetStatus | read-only | current | Status of the active IV Zoneset on this VSAN. idle - idle active - active deactive - deactive defaultZoneDeny - activation failed because of default zone behav… |
| 1.3.6.1.4.1.9.9.371.1.2.2 | TablecivrEnabledDeviceTable | not-accessible | current | This table contains the all IVR enabled devices known to the local device on each of the local VSANs. Note that the devices are learned using an internal proto… |
| 1.3.6.1.4.1.9.9.371.1.2.2.1 | RowcivrEnabledDeviceEntry | not-accessible | current | An entry (conceptual row) in this table. Each entry represents a device in a particular VSAN. |
| 1.3.6.1.4.1.9.9.371.1.2.2.1.1 | ColumncivrEnabledDeviceVsan | not-accessible | current | The VSAN corresponding to this entry. |
| 1.3.6.1.4.1.9.9.371.1.2.2.1.2 | ColumncivrEnabledDeviceAutoFabricId | not-accessible | current | The Autonomous Fabric id corresponding to this entry. |
| 1.3.6.1.4.1.9.9.371.1.2.2.1.3 | ColumncivrEnabledDeviceDomainId | not-accessible | current | The domain ID of this device corresponding this entry. |
| 1.3.6.1.4.1.9.9.371.1.2.2.1.4 | ColumncivrEnabledDeviceSwitchWwn | read-only | current | The switch WWN of this device. |
| 1.3.6.1.4.1.9.9.371.1.2.2.1.5 | ColumncivrEnabledDeviceCapability | read-only | current | The switch WWN of this device. |
| 1.3.6.1.4.1.9.9.371.1.2.3 | ScalarcivrZoneMemberFabricId | accessible-for-notify | current | The fabric address of the IV zone member which is not able to participate in inter-VSAN communication because of conflicting domainIDs. |
| 1.3.6.1.4.1.9.9.371.1.2.4 | ScalarcivDomainIdConflictVsan | accessible-for-notify | current | The VSAN in which the domainID conflict occurred. |
| 1.3.6.1.4.1.9.9.371.1.2.5 | ScalarcivrZoneSetActDeactPartialSucss | accessible-for-notify | current | This object indicates if the IV zoneset activation/deactivation was partially success. |
| 1.3.6.1.4.1.9.9.371.1.2.6 | ScalarcivrAfidMisConfigVsan | accessible-for-notify | current | The VSAN in which the AFID mis-configuration occurred. |
| 1.3.6.1.4.1.9.9.371.1.2.7 | ScalarcivrAfidMisConfigLocalAfid | accessible-for-notify | current | The local AFID value in which the AFID mis-configuration occurred. |
| 1.3.6.1.4.1.9.9.371.1.2.8 | ScalarcivrAfidMisConfigRemoteAfid | accessible-for-notify | current | The remote AFID value in which the AFID mis-configuration occurred. |
| 1.3.6.1.4.1.9.9.371.1.2.9 | ScalarcivrAfidMisConfigLocalSWwn | accessible-for-notify | current | The local switch WWN in which the AFID mis-configuration occurred. |
| 1.3.6.1.4.1.9.9.371.1.2.10 | ScalarcivrAfidMisConfigRemoteSWwn | accessible-for-notify | current | The remote switch WWN in which the AFID mis-configuration occurred. |
| 1.3.6.1.4.1.9.9.371.1.2.11 | ScalarcivrTopologyMisConfigReason | accessible-for-notify | current | The reason for a topology mis-configuration. |
| 1.3.6.1.4.1.9.9.371.2 | NodeciscoIvrMIBConformance | |||
| 1.3.6.1.4.1.9.9.371.2.1 | NodecivrZoneServerMIBCompliances | |||
| 1.3.6.1.4.1.9.9.371.2.1.1 | CompliancecivrZoneServerMIBCompliance | read-only | deprecated | The compliance statement for entities which implement the Zone Server. |
| 1.3.6.1.4.1.9.9.371.2.1.2 | CompliancecivrZoneServerMIBComplianceRev1 | read-only | deprecated | The compliance statement for entities which implement the Zone Server. |
| 1.3.6.1.4.1.9.9.371.2.1.3 | CompliancecivrZoneServerMIBComplianceRev2 | read-only | current | The compliance statement for entities which implement the Zone Server. |
| 1.3.6.1.4.1.9.9.371.2.2 | NodecivrZoneServerMIBGroups | |||
| 1.3.6.1.4.1.9.9.371.2.2.1 | GroupcivrZoneConfigurationGroup | current | A collection of objects for displaying and configuring IvrZone Membership. | |
| 1.3.6.1.4.1.9.9.371.2.2.2 | GroupcivrTopologyGroup | current | A collection of objects for IVR topology. | |
| 1.3.6.1.4.1.9.9.371.2.2.3 | GroupcivrStatsGroup | current | A collection of objects for IVR status/statistics. | |
| 1.3.6.1.4.1.9.9.371.2.2.4 | GroupcivrNotificationGroup | current | A collection of notification(s) for monitoring IVR related events. | |
| 1.3.6.1.4.1.9.9.371.2.2.5 | GroupcivrVirtualDomainsGroup | current | A collection of objects for IVR status/statistics. | |
| 1.3.6.1.4.1.9.9.371.2.2.6 | GroupcivrGenericGroup | current | A collection of objects for IVR generic configurations. | |
| 1.3.6.1.4.1.9.9.371.2.2.7 | GroupcivrTopologyGroupRev2 | current | A collection of objects for IVR topology. | |
| 1.3.6.1.4.1.9.9.371.2.2.8 | GroupcivrZoneConfigurationGroupRev2 | current | A collection of objects to support SCSI read only, Qos and Lun zoning in IVR Zone Membership configurations. | |
| 1.3.6.1.4.1.9.9.371.2.2.9 | GroupcivrNotificationGroupRev2 | current | A collection of notification(s) for monitoring IVR related events. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CIvrAutonomousFabricId | Unsigned32 (1..65535) | current | The Autonomous Fabric identifier. This identifies a set of fibre channel devices like hosts, disks, switches which are under single administration. It is up to the administrator to assign these identifiers to the Autono… |
| CIvrChecksum | OCTET STRING (SIZE(1..255)) | current | The checksum computed from the object/group of objects specified in the object description. This is used by manager to check if the object or group of objects is same across devices in the fabric. Note that method use t… |
| CIvrZoneMemberType | INTEGER { pwwnVsan(1) } | current | Type of IV zone member. pwwnVsan - the member is identified by port WWN (World Wide Name) and VSAN. |