CISCO-LAG-MIB
57 objects
Cisco Link Aggregation module for managing IEEE Std 802.3ad. This MIB provides Link Aggregation information that are either excluded by IEEE Std 802.3ad (IEEE8023-LAG-MIB) or specific to Cisco products.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CiscoInterfaceIndexList |
| IEEE8023-LAG-MIB | dot3adAggPortEntry dot3adAggPortListEntry |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.225 | IdentityciscoLagMIB | Cisco Link Aggregation module for managing IEEE Std 802.3ad. This MIB provides Link Aggregation information that are either excluded by IEEE Std 802.3ad (IEEE8… | ||
| 1.3.6.1.4.1.9.9.225.1 | NodeclagMIBObjects | |||
| 1.3.6.1.4.1.9.9.225.1.1 | NodeclagGlobalConfigObjects | |||
| 1.3.6.1.4.1.9.9.225.1.1.1 | ScalarclagAggDistributionProtocol | read-write | current | This object controls the load balancing algorithms used on this port channel interface to distribute outgoing data frames among its component interfaces. |
| 1.3.6.1.4.1.9.9.225.1.1.2 | ScalarclagAggDistributionAddressMode | read-write | current | The load balancing address mode for the device. |
| 1.3.6.1.4.1.9.9.225.1.1.3 | ScalarclagAggDistributionMplsProtocol | read-write | current | This object controls the load balancing algorithms used on this port channel interface to distribute outgoing MPLS data frames among its component interfaces. … |
| 1.3.6.1.4.1.9.9.225.1.1.4 | ScalarclagAggMaxAggregators | read-only | current | This object indicates the maximum number of aggregators supported by the device. |
| 1.3.6.1.4.1.9.9.225.1.1.5 | ScalarclagAggHashDistMethodGlobalConfig | read-write | current | Specifies the global configuration for hash distribution method applied on a port channel interface among its channel members. adaptive(1) : Adaptive hash dist… |
| 1.3.6.1.4.1.9.9.225.1.2 | NodeclagAgg | |||
| 1.3.6.1.4.1.9.9.225.1.2.1 | TableclagAggProtocolTable | not-accessible | current | A table that contains protocol information about every interface which supports link aggregation. |
| 1.3.6.1.4.1.9.9.225.1.2.1.1 | RowclagAggProtocolEntry | not-accessible | current | Entry containing aggregation protocol type for a particular interface. An entry is created in this table when its associated ifEntry is created and that interf… |
| 1.3.6.1.4.1.9.9.225.1.2.1.1.1 | ColumnclagAggProtocolType | read-write | current | The aggregation protocol type for the interface. On some platforms, aggregation protocol may be assigned per group. The group can be a collection of the ports … |
| 1.3.6.1.4.1.9.9.225.1.3 | NodeclagAggPort | |||
| 1.3.6.1.4.1.9.9.225.1.3.1 | TableclagAggPortTable | not-accessible | current | A table that contains information about every aggregation port that is associated with this system. This table contains additional objects for the dot3adAggPor… |
| 1.3.6.1.4.1.9.9.225.1.3.1.1 | RowclagAggPortEntry | not-accessible | current | An entry containing additional management information applicable to a particular aggregation port. |
| 1.3.6.1.4.1.9.9.225.1.3.1.1.1 | ColumnclagAggPortAdminStatus | read-write | current | The administrative status of the LACP protocol on this aggregation port. |
| 1.3.6.1.4.1.9.9.225.1.3.1.1.2 | ColumnclagAggPortRate | read-write | current | Specifies the requested exchange rate of LACP packets on this interface. fast(1) : The device requests its peers to send LACP packets at fast rate to this inte… |
| 1.3.6.1.4.1.9.9.225.1.4 | NodeclagAggPortList | |||
| 1.3.6.1.4.1.9.9.225.1.4.1 | TableclagAggPortListTable | not-accessible | current | This table augments the dot3adAggPortListTable and provides the complete list of ports associated with each Aggregator. |
| 1.3.6.1.4.1.9.9.225.1.4.1.1 | RowclagAggPortListEntry | not-accessible | current | A list of the ports associated with a given Aggregator. |
| 1.3.6.1.4.1.9.9.225.1.4.1.1.1 | ColumnclagAggPortListPorts | read-only | current | This object contains a list of ports currently associated with this Aggregator in the format of '[number_of_ports][cieIfDot1dBaseMappingPort1][...] [cieIfDot1d… |
| 1.3.6.1.4.1.9.9.225.1.4.1.1.2 | ColumnclagAggPortListInterfaceIndexList | read-only | current | This object contains a list of ports currently associated with this Aggregator in the format of CiscoInterfaceIndexList. |
| 1.3.6.1.4.1.9.9.225.1.5 | NodeclagAggChannelIntf | |||
| 1.3.6.1.4.1.9.9.225.1.5.1 | TableclagAggChannelIfTable | not-accessible | current | A table providing port channel configuration information for port channel interfaces identified by ifIndex. |
| 1.3.6.1.4.1.9.9.225.1.5.1.1 | RowclagAggChannelIfEntry | not-accessible | current | An entry containing port channel configuration information for port channel interfaces. |
| 1.3.6.1.4.1.9.9.225.1.5.1.1.1 | ColumnclagAggChannelIfFastSwitchOver | read-write | current | Specifies whether LACP protocol fast switchover mode is enabled on this port channel interface or not. |
| 1.3.6.1.4.1.9.9.225.1.5.1.1.2 | ColumnclagAggChannelIfMaxBundle | read-write | current | Specifies the maximum number of member ports that can be bundled on this port channel interface for LACP protocol. |
| 1.3.6.1.4.1.9.9.225.1.5.1.1.3 | ColumnclagAggChannelIfMinLink | read-write | current | Specifies the minimum number of bundled member ports that are needed in order for this port channel interface to be operational. A value of zero for this objec… |
| 1.3.6.1.4.1.9.9.225.1.5.1.1.4 | ColumnclagAggChannelIfHashDistAdminMethod | read-write | current | Specifies the hash distribution method that is administratively configured on this port channel interface upon its channel membership transition event. none(1)… |
| 1.3.6.1.4.1.9.9.225.1.5.1.1.5 | ColumnclagAggChannelIfHashDistOperMethod | read-only | current | Specifies the operational hash distribution method for this port channel interface among the port channel members. other(1) : None of the following. adaptive(2… |
| 1.3.6.1.4.1.9.9.225.2 | NodeclagMIBNotifications | |||
| 1.3.6.1.4.1.9.9.225.3 | NodeclagMIBConformance | |||
| 1.3.6.1.4.1.9.9.225.3.1 | NodeclagMIBCompliances | |||
| 1.3.6.1.4.1.9.9.225.3.1.1 | ComplianceclagMIBCompliance | read-only | deprecated | The compliance statement for entities which implement the Cisco Link Aggregation MIB |
| 1.3.6.1.4.1.9.9.225.3.1.2 | ComplianceclagMIBCompliance2 | read-only | deprecated | The compliance statement for entities which implement the Cisco Link Aggregation MIB |
| 1.3.6.1.4.1.9.9.225.3.1.3 | ComplianceclagMIBCompliance3 | read-only | deprecated | The compliance statement for entities which implement the Cisco Link Aggregation MIB |
| 1.3.6.1.4.1.9.9.225.3.1.4 | ComplianceclagMIBCompliance4 | read-only | deprecated | The compliance statement for entities which implement the Cisco Link Aggregation MIB |
| 1.3.6.1.4.1.9.9.225.3.1.5 | ComplianceclagMIBCompliance5 | read-only | deprecated | The compliance statement for entities which implement the Cisco Link Aggregation MIB |
| 1.3.6.1.4.1.9.9.225.3.1.6 | ComplianceclagMIBCompliance6 | read-only | current | The compliance statement for entities which implement the Cisco Link Aggregation MIB |
| 1.3.6.1.4.1.9.9.225.3.2 | NodeclagMIBGroups | |||
| 1.3.6.1.4.1.9.9.225.3.2.1 | GroupclagAggProtocolGroup | current | The object that provide aggregation protocol type of an interface. These are additional to the IEEE Std 802.3ad MIB. | |
| 1.3.6.1.4.1.9.9.225.3.2.2 | GroupclagAggPortGroup | current | A collection of objects that provide admin status about an aggregation port. These are additional to the IEEE Std 802.3ad MIB. | |
| 1.3.6.1.4.1.9.9.225.3.2.3 | GroupclagAggDistributionGroup | current | A collection of objects that provide the load balancing information for an aggregator. These are additional to the IEEE Std 802.3ad MIB. | |
| 1.3.6.1.4.1.9.9.225.3.2.4 | GroupclagAggDistributionMplsGroup | current | A collection of objects that provide the load balancing information for an aggregator for MPLS packets. These are additional to the IEEE Std 802.3ad MIB. | |
| 1.3.6.1.4.1.9.9.225.3.2.5 | GroupclagAggPortListGroup | current | A collection of object that provides information about ports in an aggregation. | |
| 1.3.6.1.4.1.9.9.225.3.2.6 | GroupclagAggMaxAggregatorsGroup | current | A collection of object that provides information about the maximum number of aggregators supported by the device. | |
| 1.3.6.1.4.1.9.9.225.3.2.7 | GroupclagAggRateGroup | current | A collection of object that provides information about the rate at which LACP packets are ingressed on interfaces. | |
| 1.3.6.1.4.1.9.9.225.3.2.8 | GroupclagAggChannelIfLacpGroup | current | A collection of objects that provides information about the LACP protocol configurations for port channel interfaces. | |
| 1.3.6.1.4.1.9.9.225.3.2.9 | GroupclagAggChannelIfHashDistMethodGroup | current | A collection of objects that provides information about the port channel configurations of hash distribution method on port channel interfaces. | |
| 1.3.6.1.4.1.9.9.225.3.2.10 | GroupclagAggHashDistGlobalGroup | current | A collection of object that provides information about global configuration of hash distribution method on port channel interface. | |
| 1.3.6.1.4.1.9.9.225.3.2.11 | GroupclagAggChannelIfMinLinkGroup | current | A collection of objects that provides information about the minimum link configurations for port channel interfaces. | |
| 1.3.6.1.4.1.9.9.225.3.2.12 | GroupclagAggPortListInterfaceIndexGroup | current | A collection of objects that provides information about ports in an aggregation in the format of CiscoInterfaceIndexList. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ClagAggregationProtocol | INTEGER { lacp(1), pagp(2) } | current | An enumerated type for all the supported aggregation protocols. lacp(1) Link Aggregation Control Protocol(LACP), IEEE 802.3ad pagp(2) Port Aggregation Protocol |
| ClagDistributionAddressMode | INTEGER { source(1), destination(2), both(3) } | current | An enumerated type for all the supported load balancing address modes to distribute traffic across multiple links. The address mode can be source, destination, or both used on this port channel interface to distribute o… |
| ClagDistributionMplsProtocol | INTEGER { label(1), labelIp(2) } | current | An enumerated type for all the supported load balancing algorithms used on the port channel interface to distribute outgoing MPLS (Multi-Protocol Label Switching) data frames among its component interfaces, such as MPLS… |
| ClagDistributionProtocol | INTEGER { ip(1), mac(2), port(3), vlanIpPort(4), vlanIp(5), ipPort(6) } | current | An enumerated type for all the supported load balancing algorithms used on the port channel interface to distribute outgoing data frames among its component interaces, such as IP address. ip(1) IP address mac(2) MAC add… |
| ClagPortAdminStatus | INTEGER { off(1), on(2), active(3), passive(4) } | current | An enumerated type for all the LACP administrative states on a particular aggregation port. off(1) No LACP involved on the aggregation port. on(2) The aggregation port always join link aggregation whithout any LACP prot… |